We may run Firebird as application using command line:
firebird.exe -a -p 3050
Is that possible to shutdown the firebird process using command line too?
There is no "easy" way to do it. If you started firebird.exe as an application, you can quit it by right-clicking on its icon in the taskbar, and selecting shutdown.
The only alternative is to kill it using taskkill, for example:
taskkill /IM firebird.exe
This has the following downsides:
if you have active connections, this will produce a popup to ask for confirmation of shutdown (just like when doing this from the taskbar)
if you have multiple firebird.exe processes, they will all be terminated
You can also force kill to shutdown, this will not produce the popup; open connections will be killed without prompting:
taskkill /F /IM firebird.exe
However, if you regularly need to do this, it might be better to install Firebird as a Window service that doesn't startup automatically. You can then control the service using NET START and NET STOP (or using instsvc).
For example, install Firebird as a service (require administrator command prompt):
instsvc install -demand -name firebird3
This creates a service called "Firebird Server - firebird3"
You can then start and stop the service using NET START "Firebird Server - firebird3" and NET STOP "Firebird Server - firebird3", although this also requires elevated administrator privileges.
I wonder how you can write a batch file or powershell script that, given an input of a user name, that it goes and kill every processes that is owned by that user.
For example, if I input user name: testuser. I want the script to go and kill every system processes that its owner is testuser.
On a Windows Server 2008, 2012.
Thanks.
use the command taskkill on windows server, you can kill any processes owned by specific user.
TASKKILL /F /FI "USERNAME eq "
Using powershell you can list all processes started by a specified user:
Get-Process -IncludeUserName | where {$_.UserName -eq "<Username here>"}
To kill/stop a process, either call .kill() on each result or feed the result into Stop-Process.
Say I'm running a python script that doesn't exit properly. The powershell console does not return control to me without having to close the shell and open a new one. With Bash I can simply press Control-C to kill any process. What am I missing here?
Windows 8.1 Powershell
To kill a process, you can use the command Stop-Process.
Or you can try Ctrl + Break shortcut.
Use the following stop-service <service> choose a flag like -force to force stop even if it has dependent services as well.
https://learn.microsoft.com/en-us/powershell/module/microsoft.powershell.management/stop-service?view=powershell-5.1
what is the easy way to kill remote job initiated by invoke-command with background processes?
I kick remote PS script to run legacy exe file and need a way to kill that process.
I was going to use stop-job first but as I am reading it works only for local processes.
Then I was going to use Remove-job -force command but if I understood right, it cannot kill running process until it completes (again my remote ps script will start another process to run exe file).
I am reading I can kill a process using wmi terminate command but I do not know how to get PID of remote process (I cannot use name because I can kill processes from other users)
what is the best way to achieve my goal?
my script looks like that:
invoke-command -computername server1,server2,server3..etc -script-block {my.exe} -asjob
loop to wait for all processes to complete and report progress
check for CTRL-C press and kill all remote instances on {my.exe}
ok checked this morning from work and this works fine from a calling script:
get-job | remove-job -force
I was confused by MSDN doc which says:
When you stop a background job, Windows PowerShell **completes** all tasks that are pending in that job queue and then ends the job
Check out this answer, you can add the start process command to your script block and return the pid or save it to a text file to be reference later.
PowerShell - get process ID of called application
Occasionally a program on a Windows machine goes crazy and just hangs. So I'll call up the task manager and hit the "End Process" button for it. However, this doesn't always work; if I try it enough times then it'll usually die eventually, but I'd really like to be able to just kill it immediately. On Linux I could just kill -9 to guarantee that a process will die.
This also could be used for writing batch scripts and writing batch scripts is programming.
Is there some program or command that comes with Windows that will always kill a process? A free third-party app would be fine, although I'd prefer to be able to do this on machines I sit down at for the first time.
"End Process" on the Processes-Tab calls TerminateProcess which is the most ultimate way Windows knows to kill a process.
If it doesn't go away, it's currently locked waiting on some kernel resource (probably a buggy driver) and there is nothing (short of a reboot) you could do to make the process go away.
Have a look at this blog-entry from wayback when: http://blogs.technet.com/markrussinovich/archive/2005/08/17/unkillable-processes.aspx
Unix based systems like Linux also have that problem where processes could survive a kill -9 if they are in what's known as "Uninterruptible sleep" (shown by top and ps as state D) at which point the processes sleep so well that they can't process incoming signals (which is what kill does - sending signals).
Normally, Uninterruptible sleep should not last long, but as under Windows, broken drivers or broken userpace programs (vfork without exec) can end up sleeping in D forever.
taskkill /im myprocess.exe /f
The "/f" is for "force".
If you know the PID, then you can specify that, as in:
taskkill /pid 1234 /f
Lots of other options are possible, just type taskkill /? for all of them. The "/t" option kills a process and any child processes; that may be useful to you.
Process Hacker has numerous ways of killing a process.
(Right-click the process, then go to Miscellaneous->Terminator.)
JosepStyons is right. Open cmd.exe and run
taskkill /im processname.exe /f
If there is an error saying,
ERROR: The process "process.exe" with PID 1234 could not be
terminated.
Reason: Access is denied.
then try running cmd.exe as administrator.
Get process explorer from sysinternals (now Microsoft)
Process Explorer - Windows Sysinternals | Microsoft Docs
One trick that works well is to attach a debugger and then quit the debugger.
On XP or Windows 2003 you can do this using ntsd that ships out of the box:
ntsd -pn myapp.exe
ntsd will open up a new window. Just type 'q' in the window to quit the debugger and take out the process.
I've known this to work even when task manager doesn't seem able to kill a process.
Unfortunately ntsd was removed from Vista and you have to install the (free) debbugging tools for windows to get a suitable debugger.
setup an AT command to run task manager or process explorer as SYSTEM.
AT 12:34 /interactive "C:/procexp.exe"
If process explorer was in your root C drive then this would open it as SYSTEM and you could kill any process without getting any access denied errors. Set this for like a minute in the future, then it will pop up for you.
FYI you can sometimes use SYSTEM or Trustedinstaller to kill tasks ;)
google quickkill_3_0.bat
sc config TrustedInstaller binPath= "cmd /c TASKKILL /F /IM notepad.exe
sc start "TrustedInstaller"
I had this issue too, here is how I solved it.
1/ Open the « task manager «
2/ Locate the application name in the list
3/ Once found, right click on its name then click on « properties »
4/ In the properties interface, click on « security «
5/ Click on « edit » to change permissions
6/ « Deny » all permissions for all users, click on « apply » then « ok »
7/ click on « advanced » for special permissions settings
8/ Remove permissions for all users
9/ click on « apply » then « ok »
10/ click on « apply » then « ok » again
11/ you can now kill the process on task manager as well as uninstall the app of you want to.
When ntsd access is denied, try:
ZeroWave was designed to be a simple tool that will provide a multilevel termination of any kind of process.
ZeroWave is also a easy-to-use program due to its simple installation and its very friendly graphical interface.
ZeroWave has three termination modes and with the "INSANE" mode can terminate any kind of process that can run on Windows.
It seems that ZeroWave can't kill avp.exe
wmic process where processid="11008" call terminate