Getting the below as error:
Collecting dlib
Using cached dlib-19.1.0.tar.gz
Installing collected packages: dlib
Running setup.py install for dlib ... error
Complete output from command /Library/Frameworks/Python.framework/Versions/3.5/bin/python3.5 -u -c "import setuptools, tokenize;__file__='/private/var/folders/x1/bsml9c1532x102zlxhqt_k380000gn/T/pip-build-_1n6svbf/dlib/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /var/folders/x1/bsml9c1532x102zlxhqt_k380000gn/T/pip-0m_zvdwp-record/install-record.txt --single-version-externally-managed --compile:
running install
running build
error: Cannot find cmake, ensure it is installed and in the path.
You can install cmake on OSX using `sudo brew install cmake`.
You can also specify its path with --cmake parameter.
----------------------------------------
Then sudo brew install cmake is not installing as well.
Any solutions to this.
Maybe you should use brew without sudo..
brew install cmake
Related
I would really like to install Spyder3 for Python 3.6 on Ubuntu 16.04. I don't want Anaconda, I just want Spyder 3.
I've been looking around and all the solutions seem out of date. I have tried the following but no success...
sudo apt install spyder3
sudo apt install python3-pyqt4 python3-pyqt5 python3-pyqt5.qtsvg python3-pyqt5.qtwebkit
sudo pip3 install -U spyder
The last command gives me this error at the end, which I don't understand:
Can't rollback psutil, nothing uninstalled.
Command "/usr/bin/python3 -u -c "import setuptools,tokenize;__file__='/tmp/pip-build-479pjggv/psutil/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-i3_5xsal-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-479pjggv/psutil/
Any help would be deeply appreciated, I am desperate to install Spyder3, all other IDLEs look far too complicated (I come from an R background).
Try to install Anaconda (anaconda.org) - spyder is included, also almost all packages you'll need
often I face the same error during downloading the python modules using pip. Could you guys help me sort this out? FYI I am using python 3.7v.
C:\>pip install PyAudio
Collecting PyAudio
Downloading https://files.pythonhosted.org/packages/ab/42/b4f04721c5c5bfc196ce156b3c768998ef8c0ae3654ed29ea5020c749a6b/PyAudio-0.2.11.tar.gz
Building wheels for collected packages: PyAudio
Running setup.py bdist_wheel for PyAudio ... error
Complete output from command c:\users\avinash.tripathy\appdata\local\programs\python\python37-32\python.exe -u -c "import setuptools, tokenize;__file__='C:\\Users\\AVINAS~1.TRI\\AppData\\Local\\Temp\\pip-install-_qfc03y7\\PyAudio\\setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d C:\Users\AVINAS~1.TRI\AppData\Local\Temp\pip-wheel-fjb2zkz4 --python-tag cp37:
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win32-3.7
copying src\pyaudio.py -> build\lib.win32-3.7
running build_ext
building '_portaudio' extension
error: Microsoft Visual C++ 14.0 is required. Get it with "Microsoft Visual C++ Build Tools": https://visualstudio.microsoft.com/downloads/
----------------------------------------
Failed building wheel for PyAudio
Running setup.py clean for PyAudio
Failed to build PyAudio
Installing collected packages: PyAudio
Running setup.py install for PyAudio ... error
Complete output from command c:\users\avinash.tripathy\appdata\local\programs\python\python37-32\python.exe -u -c "import setuptools, tokenize;__file__='C:\\Users\\AVINAS~1.TRI\\AppData\\Local\\Temp\\pip-install-_qfc03y7\\PyAudio\\setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record C:\Users\AVINAS~1.TRI\AppData\Local\Temp\pip-record-h2e_hkyb\install-record.txt --single-version-externally-managed --compile:
running install
running build
running build_py
creating build
creating build\lib.win32-3.7
copying src\pyaudio.py -> build\lib.win32-3.7
running build_ext
building '_portaudio' extension
error: Microsoft Visual C++ 14.0 is required. Get it with "Microsoft Visual C++ Build Tools": https://visualstudio.microsoft.com/downloads/
----------------------------------------
Command "c:\users\avinash.tripathy\appdata\local\programs\python\python37-32\python.exe -u -c "import setuptools, tokenize;__file__='C:\\Users\\AVINAS~1.TRI\\AppData\\Local\\Temp\\pip-install-_qfc03y7\\PyAudio\\setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record C:\Users\AVINAS~1.TRI\AppData\Local\Temp\pip-record-h2e_hkyb\install-record.txt --single-version-externally-managed --compile" failed with error code 1 in C:\Users\AVINAS~1.TRI\AppData\Local\Temp\pip-install-_qfc03y7\PyAudio\
It doesn't look like PyAudio has a binary package available under pip. Christoph Gohlke maintains Unofficial Windows Binaries for Python Extension Packages and it has PyAudio. Download an appropriate version, then install it directly with pip install.
I have installed:
*Python 3.6.1
*qt/5.9.1
*sip-4.19.3
When I type
pip install pyside
Or
pip install -U PySide
I always get the error bellow:
Collecting PySide
Using cached PySide-1.2.4.tar.gz
Building wheels for collected packages: PySide
Running setup.py bdist_wheel for PySide ... error
Complete output from command /usr/local/opt/python/bin/python2.7 -u -c "import setuptools, tokenize;__file__='/private/var/folders/tv/4rb2txws5ml_cwj0v060ym_80000gn/T/pip-build-jscv9F/PySide/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /var/folders/tv/4rb2txws5ml_cwj0v060ym_80000gn/T/tmp5VfNR7pip-wheel- --python-tag cp27:
Removing /private/var/folders/tv/4rb2txws5ml_cwj0v060ym_80000gn/T/pip-build-jscv9F/PySide/pyside_package
running bdist_wheel
running build
Python architecture is 64bit
error: Failed to find qmake. Please specify the path to qmake with --qmake parameter.
----------------------------------------
Failed building wheel for PySide
Running setup.py clean for PySide
Failed to build PySide
Installing collected packages: PySide
Running setup.py install for PySide ... error
Complete output from command /usr/local/opt/python/bin/python2.7 -u -c "import setuptools, tokenize;__file__='/private/var/folders/tv/4rb2txws5ml_cwj0v060ym_80000gn/T/pip-build-jscv9F/PySide/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /var/folders/tv/4rb2txws5ml_cwj0v060ym_80000gn/T/pip-lTCccK-record/install-record.txt --single-version-externally-managed --compile:
Removing /private/var/folders/tv/4rb2txws5ml_cwj0v060ym_80000gn/T/pip-build-jscv9F/PySide/pyside_package
running install
running build
Python architecture is 64bit
error: Failed to find qmake. Please specify the path to qmake with --qmake parameter.
----------------------------------------
Command "/usr/local/opt/python/bin/python2.7 -u -c "import setuptools,
tokenize;__file__='/private/var/folders/tv/4rb2txws5ml_cwj0v060ym_80000gn/T/pip-build-jscv9F/PySide/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n','\n');f.close();exec(compile(code, __file__, 'exec'))" install
--record /var/folders/tv/4rb2txws5ml_cwj0v060ym_80000gn/T/pip-lTCccK-record/install-record.txt
--single-version-externally-managed --compile" failed with error code 1 in
/private/var/folders/tv/4rb2txws5ml_cwj0v060ym_80000gn/T/pip-build-jscv9F/PySide/
Ok, I finally found a "solution".
First of all, I am not an expert (I am super new coding).
Based on my own experience below you will find a solution as well.
I need to clarify something first, there are two ways to use this GUI QT - PyQt by Riverbank Computing or(and) PySide, originally developed by Nokia.
I tried many differents ways to install PySide, but no success, so I ended up finding PyQt, that does the same thing.
Watching this video I installed the PyQT5 in my Mac OS and now it is working.
https://www.youtube.com/watch?v=2kHk8ZjxH64
Example of Hello World using PyQT
http://pythoncentral.io/intro-to-pysidepyqt-basic-widgets-and-hello-world/
The wiki.qt.io says
"PySide has included support for Python 3.2 since version 1.0.8." but it doesn't work for me.
Good lucky.
Installing scipy using pip gives me following error.
Command "c:\python27\python.exe -u -c "import setuptools, tokenize;file='c:\users\arun\appdata\local\temp\pip-build-nlwjdr\scipy\setup.py';exec(compile(getattr(tokenize, 'open', open)(file).read().replace('\r\n', '\n'), file, 'exec'))" install --record c:\users\arun\appdata\local\temp\pip-5qc2vr-record\install-record.txt --single-version-externally-managed --compile" failed with error code 1 in c:\users\arun\appdata\local\temp\pip-build-nlwjdr\scipy\
Tried cloning the scipy from github and running setup command. No luck.
python setup.py install
UPDATE: Installed Windows binary available at this link and it worked
http://sourceforge.net/projects/scipy/files/scipy/0.11.0/scipy-0.11.0-win32-superpack-python2.7.exe/download
I have created virtual environment
leo#kodar:/var/www/python$ mkvirtualenv -p /var/www/python/3.5.0/bin/python3 --no-site-packages env350_185
and trying to install psycopg2 to it.
pip3 install psycopg2
This gives me a big log with errors. Here is the resume string of output log:
Command /var/www/.virtualenvs/env350_185/bin/python3 -c "import setuptools, tokenize;__file__='/tmp/pip-build-xibdmand/psycopg2/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-gtvfmn3f-record/install-record.txt --single-version-externally-managed --compile --install-headers /var/www/.virtualenvs/env350_185/include/site/python3.5 failed with error code 1 in /tmp/pip-build-xibdmand/psycopg2
When I try to do the same with virtual environment created with system version of Python3
mkvirtualenv -p /usr/bin/python3 --no-site-packages env_sys
it gives success.
What could the problem be? Other packages like Django 1.8.5 can be installed correctly. I have also tested it with python 3.4.3 from custom folder and get the same error. Only system python3 (3.4.3) works.
Full pip error log is here: https://gist.github.com/leoKiddy/25beaa96c67b2cfa2263