This question is not duplicated, because I want to obtain an interactive shell without running with -it flags.
I'm moving first steps into Docker to create images only for internal use.
I start from this envirornment_full.df:
FROM ubuntu:16.04
ENTRYPOINT ["/bin/bash"]
I then build
docker rmi environment:full
docker build -t environment:full -f environment.df .
Then run
docker run environment:full
Running docker images -am I see my image
REPOSITORY TAG IMAGE ID CREATED SIZE
environment full aa91bbd39167 4 seconds ago 129 MB
So I run it
docker run environment:full
I see nothing happening ....
$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
5847c0a18f30 environment:full "/bin/bash" 21 seconds ago Exited (0) 20 seconds ago admiring_mirzakhani
Also
$ docker run environment:full -ti
bash: cannot set terminal process group (-1): Inappropriate ioctl for device
bash: no job control in this shell
root#aa768a585f33:/# exit
I'd like to have the ubuntu prompt, like if I was in a SSH connection. And this without user must enter -i or -tty flags.
How can I realize this?
bash won't run at all if stdin is closed. If you don't provide the -i flag, bash will simply exit immediately. So when you...
docker run environment:full
...bash exits immediately, and so your container exits. You would see it if you ran docker ps -a, which shows container that have stopped.
bash won't give you an interactive prompt if it's not attached to a tty. So if you were to run...
coerk run -i environment:full
...you would get a bash shell, but with no prompt, or job control, or other features. You need to provide -t for Docker to allocate a tty device.
You can't get what you want without providing both the -i and -t options on the command line.
An alternative would be to set up an image that runs an ssh daemon, and have people ssh into the container. Instead of behaving "like if I was in a SSH connection", it would actually be an ssh session.
Also, note that this:
docker run environment:full -ti
Is not the same as this:
docker run -it environment:full
The former will run bash -ti inside a container, while the latter passes the -i and -t options to docker run.
Related
I'm running Docker Toolbox on VirtualBox on Windows 10.
I'm having an annoying issue where if I docker exec -it mycontainer sh into a container - to inspect things, the shell will abruptly exit randomly back to the host shell, while I'm typing commands. Some experimenting reveals that it's when I press two letters at the same time (as is common when touch typing) that causes the exit.
The container will still be running.
Any ideas what this is?
More details
Here's a minimal docker image I'm running inside. Essentially, I'm trying to deploy kubernetes clusters to AWS via kops, but because I'm on Windows, I have to use a container to run the kops commands.
FROM alpine:3.5
#install aws-cli
RUN apk add --no-cache \
bind-tools\
python \
python-dev \
py-pip \
curl
RUN pip install awscli
#install kubectl
RUN curl -LO https://storage.googleapis.com/kubernetes-release/release/$(curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt)/bin/linux/amd64/kubectl
RUN chmod +x ./kubectl
RUN mv ./kubectl /usr/local/bin/kubectl
#install kops
RUN curl -LO https://github.com/kubernetes/kops/releases/download/$(curl -s https://api.github.com/repos/kubernetes/kops/releases/latest | grep tag_name | cut -d '"' -f 4)/kops-linux-amd64
RUN chmod +x kops-linux-amd64
RUN mv kops-linux-amd64 /usr/local/bin/kops
I build this image:
docker build -t mykube .
I run this in the working directory of my the project I'm trying to deploy:
docker run -dit -v "${PWD}":/app mykube
I exec into the shell:
docker exec -it $containerid sh
Inside the shell, I start running AWS commands as per here.
Here's some example output:
##output of previous dig command
;; Query time: 343 msec
;; SERVER: 10.0.2.3#53(10.0.2.3)
;; WHEN: Wed Feb 14 21:32:16 UTC 2018
;; MSG SIZE rcvd: 188
##me entering a command
/ # aws s3 mb s3://clus
##shell exits abruptly to host shell while I'm writing
DavidJ#DavidJ-PC001 MINGW64 ~/git-workspace/webpack-react-express (master)
##container is still running
$ docker ps --all
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
37a341cfde83 mykube "/bin/sh" 5 minutes ago Up 3 minutes gifted_bhaskara
##nothing in docker logs
$ docker logs --details 37a341cfde83
A more useful update
Adding the -D flag gives an important clue:
$ docker -D exec -it 04eef8107e91 sh -x
DEBU[0000] Error resize: Error response from daemon: no such exec
/ #
/ #
/ #
/ #
/ # sdfsdfjskfdDEBU[0006] [hijack] End of stdin
DEBU[0006] [hijack] End of stdout
Also, I've ascertained that what specifically is causing the issue is pressing two letters at the same time (which is quite common when I'm touch typing).
There appears to be a github issue for this here, though this one is for docker for windows, not docker toolbox.
This issue appears to be a bug with docker and windows. See the github issue here.
As a work around, prefix your docker exec command with winpty, which comes with git bash.
eg.
winpty docker exec -it mycontainer sh
Check the USER which is the one you are login with when doing a docker exec -it yourContainer sh.
Its .bahsrc, .bash_profile or .profile might include a command which would explain why the session abruptly quits.
Check also the logs associated to that container (docker logs --details yourContainer) in order to see if that closed session generated anything in stderr.
Reasons I can think of for a process to be killed in your container include:
Pid 1 exiting in the container. This would cause the container to go into a stopped state, but a restart policy could have restarted it. See your docker container inspect output to see if this is happening. This is the most common cause I've seen.
Out of memory on the OS, where the kernel would then kill processes. View your system logs and dmesg to see if this is happening.
Exceeding the container memory limit, where docker would kill the container, possibly restarting it depending on your policy. You would again view docker container inspect but the status will have different details.
Process being killed on the host, potentially by a security tool.
Perhaps a selinux or apparmor policy being violated.
Networking issues. Never encountered it myself, but since docker is a client / server design, there's a potential for a network disconnect to drop the exec session.
The server itself is failing, and you'd see various logs in syslog / dmesg indicating problems it can't recover from.
In my development, I find myself issuing a docker run command followed by a docker exec command on the resulting container ID quite frequently. It's a little annoying to have to copy/paste the container ID between commands, so I was trying to pipe the container ID into my docker exec command.
Here's my example command.
docker run -itd image | xargs -i docker exec -it {} bash
This starts the container, but then I get the following error.
the input device is not a TTY
Does anyone have any idea how to get around this?
Edit: I also forgot to mention I have an ENTRYPOINT defined and cannot override that.
Do this instead:
ID=$(docker run -itd image) && docker exec -it $ID bash
Because xargs executes it arguments without allocating a new tty.
If you just want to "bash"-into the container you do not have to pass the container-id around. You can simply run
docker run -it --rm <image> /bin/bash
For example, if we take the ubuntu base image
docker run -it --rm ubuntu /bin/bash
root#f80f83eec0d4:/#
from the documentation
-t : Allocate a pseudo-tty
-i : Keep STDIN open even if not attached
--rm : Automatically remove the container when it exits
The command /bin/bash overwrites the default command that is specified with the CMD instruction in the Dockerfile.
The answers from this question do not work.
The docker container always exits before I can attach or won't accept the -t flag. I could list all of the commands I've tried, but it's a combination of start exec attach with various -it flags and /bin/bash.
How do I start an existing container into bash? Why is this so difficult? Is this an "improper" use of Docker?
EDITS:
I created the container with docker run ubuntu. The information about the container: 60b93bda690f ubuntu "/bin/bash" About an hour ago Exited (0) 50 minutes ago ecstatic_euclid
First of all, a container is not a virtual machine. A container is an isolation environment for running a process. The life-cycle of the container is bound to the process running inside it. When the process exits, the container also exits, and the isolation environment is gone. The meaning of "attach to container" or "enter an container" actually means you go inside the isolation environment of the running process, so if your process has been exited, your container has also been exited, thus there's no container for you to attach or enter. So the command of docker attach, docker exec are target at running container.
Which process will be started when you docker run is configured in a Dockerfile and built into a docker image. Take image ubuntu as an example, if you run docker inspect ubuntu, you'll find the following configs in the output:
"Cmd": ["/bin/bash"]
which means the process got started when you run docker run ubuntu is /bin/bash, but you're not in an interactive mode and does not allocate a tty to it, so the process exited immediately and the container exited. That's why you have no way to enter the container again.
To start a container and enter bash, just try:
docker run -it ubuntu
Then you'll be brought into the container shell. If you open another terminal and docker ps, you'll find the container is running and you can docker attach to it or docker exec -it <container_id> bash to enter it again.
You can also refer to this link for more info.
Here is a very simple Dockerfile with instructions as comments ... launch it to spin up a running container you can exec login to
FROM ubuntu:20.04
ENV TERM linux
ENV DEBIAN_FRONTEND noninteractive
RUN apt-get update
RUN apt-get install -y
CMD ["/bin/bash"]
# ... save this file as Dockerfile then in same dir issue following
#
# docker build --tag stens_ubuntu . # creates image stens_ubuntu
#
# docker run -d stens_ubuntu sleep infinity # launches container
#
# docker ps # show running containers
#
#
# ... find CONTAINER ID from above and put into something like this
#
# docker exec -ti $( docker ps | grep stens_ubuntu | cut -d' ' -f1 ) bash # login to running container
# docker exec -ti 3cea1993ed28 bash # login to running container using sample containerId
#
A container will exit normally when it has no work to do ... if you give it no work it will exit immediately upon launch for this reason ... typically the last command of your Dockerfile is the execution of some flavor of a server which stays alive due to an internal event loop and in so doing keeps alive its enclosing container ... short of that you can mention a server executable which has been installed into the container as the final parameter of your call to
docker run -d my-image-name my-server-executable
i'm on mac running:
docker is configured to use the default machine with IP 192.168.99.100
For help getting started, check out the docs at https://docs.docker.com
my-mac:mydir$ docker run ubuntu /bin/bash
my-mac:mydir$
am i doing something wrong? shouldn't I get into the ubuntu shell?
By running docker run ubuntu /bin/bash, docker create a randomly-named container from the image ubuntu and runs a bash without stdin, stdout nor stderr then bash exits (right after being started).
Try at least to set a tty and interactive mode (aka foreground mode):
docker ps -a
# if not exited, stop it first
docker stop <container_id>
# remove the container which cannot be used
docker rm <container_id>
# let's try again
docker run -it --rm --name=test ubuntu bash
As commented by physincubus:
'-it' is the bit that makes it interactive,
'--rm' removes the container when you exit (so if you want to be able to exit for detach and reattach later, do not do this), and
'--name' allows you to name the container more explicitly in case you want to run multiple instances of the same container
Run it with following command
docker run -it ubuntu /bin/bash
Then you will get bash prompt of ubuntu container
I want to set up a cron job to run a set of commands inside a docker container and then commit the changes to the docker image. I'm able to run the container as a daemon and get the container ID using this command:
CONTAINER_ID=$(sudo docker run -d my-image /bin/sh -c "sleep 10")
but I'm having trouble with the second part--committing the changes to the image once the sleep 10 command completes. Is there a way for me to tell when the docker container is about to be killed and run another command before it is?
EDIT: As an alternative, is there a way to trigger ctrl-p-q via a shell script in the container to leave the container running but return to the host?
There are following ways to persist container data:
Docker volumes
Docker commit
a) create container from ubuntu image and run a bash terminal.
$ docker run -i -t ubuntu:14.04 /bin/bash
b) Inside the terminal install curl
# apt-get update
# apt-get install curl
c) Exit the container terminal
# exit
d) Take a note of your container id by executing following command :
$ docker ps -a
e) save container as new image
$ docker commit <container_id> new_image_name:tag_name(optional)
f) verify that you can see your new image with curl installed.
$ docker images
$ docker run -it new_image_name:tag_name bash
# which curl
/usr/bin/curl
Run it in the foreground, not as daemon. When it ends the script that launched it takes control and commits/push it
I didn't find any of these answers satisfying, as my goal was to 1) launch a container, 2) run a setup script, and 3) capture/store the state after setup, so I can instantly run various scripts against that state later. And all in a local, automated, continuous integration environment (e.g. scripted and non-interactive).
Here's what I came up with (and I run this in Travis-CI install section) for setting up my test environment:
#!/bin/bash
# Run a docker with the env boot script
docker run ubuntu:14.04 /path/to/env_setup_script.sh
# Get the container ID of the last run docker (above)
export CONTAINER_ID=`docker ps -lq`
# Commit the container state (returns an image_id with sha256: prefix cut off)
# and write the IMAGE_ID to disk at ~/.docker_image_id
(docker commit $CONTAINER_ID | cut -c8-) > ~/.docker_image_id
Note that my base image was ubuntu:14.04 but yours could be any image you want.
With that setup, now I can run any number of scripts (e.g. unit tests) against this snapshot (for Travis, these are in my script section). e.g.:
docker run `cat ~/.docker_image_id` /path/to/unit_test_1.sh
docker run `cat ~/.docker_image_id` /path/to/unit_test_2.sh
Try this if you want an auto commit for all which are running. Put this in a cron or something, if this helps
#!/bin/bash
for i in `docker ps|tail -n +2|awk '{print $1}'`; do docker commit -m "commit new change" $i; done