I downloaded the visual studio 2019 community installer and ran it. It ran successfully but instead of opening the visual studio installer when it completed it just closed. I located the visual studio installer 'setup.exe' (under C:/Program Files (x86)/Microsoft Visual Studio/Installer) and ran it. It opens the installer but instead of allowing me to select tools to install it just has 2 empty tabs labeled 'installed' and 'available' and a side bar that shows developer news.
I don't have any antivirus or firewall running. I uninstalled every version of visual studio I had in case the installer was assuming I already have VS2019. I updated windows and my drivers.
EDIT:
I had a hunch that I might find something out by using 'setup -h' in command prompt. It appears that it may be possible to install vs2019 by using the right tags.
I guessed
setup install --productid Microsoft.VisualStudio.Product.Community --channelid VisualStudio.15.Release
might work but the installer says "
A product matching the following parameters cannot be found:
channelId: VisualStudio.15.Release
productId: Microsoft.VisualStudio.Product.Community
"
If you know what the right tags are that might be an adequate solution.
Please try to reinstall it:
1) run cmd as Administrator and then type:
"%programfiles(x86)%\Microsoft Visual Studio\Installer\resources\app\layout\InstallCleanup.exe" -full
2) restart vs_installer again.
After re-installing Visual Studio Community edition I've been getting this error.
I get the error right after the splashscreen shows
Could not load file or assembly 'Microsoft.ServiceHub.Client'
Please open File Explorer and search this file name to verify this file is existing on your computer or not.
Meanwhile, you can have a try with the following to troubleshoot this issue:
Clear all folders and files under the folder: %LocalAppData%\Microsoft\VisualStudio\15.0_xxx\ and restart the VS 2017 to check it again.
Open cmd and navigate to the VS 2017 installation folder like C:\Program Files(x86)\Microsoft Visual Studio\2017\xxx\Common7\IDE and run the command: devenv /safemode to run it as safe mode, then check if the installed extensions caused this issue.
Re-run the VS 2017 installer as administrator and choose Repair to repair it
I installed the CTP of the multi-device-hybrid apps and the new app templates didn't show up in VS. The add-in also didn't show up in the Extensions & Updates list in VS. Trying to Uninstall it claimed to work instantly, but didn't uninstall anything.
This is an odd situation and should generally not occur. It seems the VSIX file got copied over but was not installed correctly.
Here's the work around (run using an administrative command prompt):
"C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common \IDE\VSIXInstaller.exe" /admin /uninstall:MultiDeviceHybridApps..db151788-9b27-49db-a5e2-d25a2653eb83
This removed the broken entries for the VSIX from the previous failed attempt to install. Following this, issue another command:
"C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\VSIXInstaller.exe" "%localappdata\Microsoft\MultiDeviceHybridApps\Microsoft.VisualStudio.MultiDeviceHybridApps.vsix" /admin
At this point, the VSIX should be installed successfully and the templates will become available in Visual Studio.
Whenever I try to create a new project in VS 2010 I get the error:
New project/item dialog could not be initialized due to error:
Exception of type 'Microsoft.VisualStudio.Dialogs.DialogInitializationException' was thrown.
And when try to open existing project visual studio 2010 restarts.
I had the same problem on my computer. After a long time searching I solved it by the following steps:
Close all instances of Visual Studio
Go to "C:\Program Files\Microsoft Visual Studio 10.0\Common7\IDE" (or whatever is your VS installation directory)
Run command devenv.exe /resetuserdata and wait until finished
Run Visual Studio
I can't find the former case. As you met an exception
Microsoft.VisualStudio.Dialogs.DialogInitializationException
I am suggesting you try the way below:
Run devenv /resetuserdata.
Delete the file:
%LOCALAPPDATA%\Microsoft\VisualStudio\11.0\ComponentModelCache
and restart Visual Studio.
Close all VS instances and try the solution mentioned here:
Launch Developer Command Prompt for VS 2017 as Administrator
Go to VS 2017 installation folder, for example: pushd C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise
gacutil -if Common7\IDE\PublicAssemblies\Microsoft.VisualStudio.Shell.Interop.8.0.dll
Open your control panel
Change
Regional -> Formats tab -> Format: English(United States)
https://connect.microsoft.com/VisualStudio/feedback/details/727578/vs-do-not-work-with-finnish-number-format-on-w8-64-bit
It works for me :)
This problem can cause when you install an older version of Visual Studio nearby the current version. For example VS 2017 is installed on your system and you do force install of VS 2008.
I faced this problem many years ago by installing VS 2008 after VS 2010;
and today again I had this problem. Because I installed SolidWorks 2015 after VS 2017. SolidWorks had a Visual Studio 2008 inside its package that interferes my installation.
Just uninstalled VS 2008 and I'm done.
I found this to still be an issue in Visual Studio Community 2017, Microsoft released a work around that fixed my problem:
The work-around for this issue would be:
-Launch “Developer Command Prompt for VS 2017” as Administrator
-Go to VS 2017 installation folder, for example: pushd C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise
-gacutil -if Common7\IDE\PublicAssemblies\Microsoft.VisualStudio.Shell.Interop.8.0.dll
How do you remove the following noise templates that don't even work?
In Visual Studio: go to Tools > Extensions and Updates and then uninstall or disable the template.
To save a bit of time for 2010 users, the folder has moved:
...\My Documents\Visual Studio 2010\Templates\ProjectTemplates
For Visual Studio 2013, I found my template cache here:
%USERPROFILE%\AppData\Roaming\Microsoft\VisualStudio\12.0\ProjectTemplatesCache
Deleting them off of disk should do the trick. Where they exist will depend a bit on where you installed them. If you installed them for all users they will be at
%ProgramFiles%\Microsoft Visual studio 9.0\Common7\Ide\ProjectTemplatesCache
For a single user they will be at
%USERPROFILE%\Visual Studio 2008\Templates\ProjectTemplates
EDIT
If InstallVSTemplates fails, it is likely one of the following. The one I can't help with is some program randomly dumping files inside of the ProjectTemplatesCache directory.
The other more likely cause is there is a bad template in the ProjectTemplates directory. InstallVSTemplates really just goes through this directory, and unzips all of the files into the ProjectTemplatesCache directory. You will have to search through this directory and find the .zip file which contains the junk files being added to your project Once you find the file, delete it, delete ProjectTemplatesCache, and then re-run InstallVSTemplates.
After manually searching for some of the custom profile templates(.vstemplate),I found them at the following location:
%userprofile%\AppData\Local\Microsoft\VisualStudio\10.0\Extensions
It appears VS2010 installs some of the templates as extesions or the authors made it that way.I hope this helps someone.
May need to run "devenv /setup" at the run command to refresh the VS2010 after you delete the templates.
For me it was a matter of removing it from here using VS2017:
%USERPROFILE%\AppData\Roaming\Microsoft\VisualStudio\15.0_45552a03\ProjectTemplatesCache
Delete the bad/unwanted project folders from
C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\ProjectTemplates
Clear cache
C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\ProjectTemplatesCache
Delete stuff from (perhaps not necessary)
C:\Users[Your User Name]\Documents\Visual Studio 2008\Templates\ProjectTemplates
and finally open Visual Studio 2008 Command Prompt as Administrator and run
devenv /installvstemplates
For me the issue got resolved when I deleted the cache.bin file from ItemTemplatesCache folder. Full path of this folder is:
C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\ItemTemplatesCache
Also make sure you delete the template files from below locations:
C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\ItemTemplates
C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\ItemTemplatesCache
C:\Users\Default\Documents\Visual Studio 2010\Templates\ItemTemplates
C:\Users[NT-USERNAME]\Documents\Visual Studio 2010\Templates\ItemTemplates
For Visual Studio 2019:
Extensions > Manage extensions > Installed > Uninstall
Worke for VS 2012 and 2015 :
In Visual Studio: go to Tools > Extensions and Updates and then uninstall or disable the template.
worke in VS 2019 :
1- In VS2019, custom templates can be removed by deleting the template folder from %USERPROFILE%\AppData\Roaming\Microsoft\VisualStudio{VSVersion}\ProjectTemplatesCache. Look for a {VSVersion} that begins with "16".
https://i.stack.imgur.com/V6SQ5.png
2- Delete What You Want From Templates Folder in {C:\Users\USERName\Documents\Visual Studio 2019\My Exported Templates}
Notes :
{ProjectTemplatesCache} Or {ItemTemplatesCache}
https://i.stack.imgur.com/9BM9p.png
For Visual Studio Express 2010 you should delete all folders under
%USERPROFILE%\AppData\Local\Microsoft\VCSExpress\10.0\Extensions
For Visual Studio 2013 Community, you have to delete {program folder}\Common7\IDE\ItemTemplatesCache\cache.bin after deleting all the unwanted files as described above. Afterwards VS will rebuild the templates listing in the New Project... dialog.
You could also try this:
dotnet new --uninstall <PATH|NUGET_ID>
It works for me in VS 2019 and VS 2022 to uninstall the Avalonia templates.
Description
The dotnet new --uninstall command uninstalls a template package at the PATH or NUGET_ID provided. When the <PATH|NUGET_ID> value isn't specified, all currently installed template packages and their associated templates are displayed. When specifying NUGET_ID, don't include the version number.
Examples
Uninstall the Avalonia templates
dotnet new --uninstall Avalonia.Templates
From MicrosoftDocs
If the template was installed by double clicking a VSIX file, it is considered an extension and can be uninstalled using the technique described by Hamid Behnam above. Otherwise, it can be deleted from one of the template directories mentioned above.
It looks like in each case we use different recipe. Unfortunately, commands line and VS menu command listed in this thread did not work in my case, which is MS VS 2019 Community Edition on Win7 x64:
First, close VS, remove unwanted *.zip files from all following folders, as well as hidden cache.bin file from the last \ProjectTemplatesCache folder (it will be restored at VS startup), then restart VS. Here are those 3 folders:
{Documents}\Visual Studio 2019\My Exported Templates
{Documents}\Visual Studio 2019\Templates\ProjectTemplates
{User}\AppData\Roaming\Microsoft\VisualStudio{Number}\ProjectTemplatesCache