I'm trying to install PostgreSQL 9.0.1 on Windows Server 2008, but every time, there will be such error message
"Problem running post-install step. Installation may not complete
correctly. Failed to start the database server"
in the installation log, it is due to a failure in initdb.exe, error is
"The program postgres is needed by initdb, but was not found in the
same directory as D:\PostgreSQL\9.0\bin\initdb.exe, Check your
installation."
I searched such error in internet and tried the solution in this page "Installing PostgreSQL on Windows Server 2008", but no help.
After reading code of initdb, I know it is caused by the window api CreateProcess in the function pipe_read_line. the calling of CreateProcess returned -5 (access denied). it is because initdb was executed in a subprocess invoked in the functiion CreateRestrictedProcess.
I know it is due to privilege setting, I ran gpedit.msc to add users group (even everyone) into almost all privilege policy, but the error was still there.
I also assigned full control rights of the install target folder to everyone, no help!
I also tried postgresql 9.6.2, the error was still there :-)
from the code, I know if there is the environment variable PG_RESTRICT_EXEC with value 1, initdb will not executed in a restricted process. so before run initdb.exe, I set an environment PG_RESTRICT_EXEC=1 in command prompt, then run initdb.exe. this time such error was gone!!
So I wonder how to change the os settings to allow the installation running without error!
Related
I am trying to install Oracle 19c on windows 11 but getting the below error.
[INS-13001] Oracle Database is not supported on this operating system. Installer will not perform prerequisite checks on the system.
I have performed the below task to resolve the issue but couldn't get through.
1.I extracted the installation folder to a different location and tried installation.
2.I tried to run the setup.exe file and setup application as administrator.
3.If I am skipping this error message(1_err.png), I am getting another error(2_err.png).
4.Stopping the OracleRemExecServiceV2 service and again tried installing it.
I have attached the error snapshot for the same i.e 1_err.png and 2_err.png
heroku : File C:\Users\mar\AppData\Roaming\npm\heroku.ps1 cannot be loaded. The file C:\Users\mar\AppData\Roaming\npm\heroku.ps1 is not digitally
signed. You cannot run this script on the current system. For more information about running scripts and setting execution policy, see
about_Execution_Policies at https:/go.microsoft.com/fwlink/?LinkID=135170.
This is the error I'm getting. I've tried running "heroku -v" within the cmd and it works there so I know it was installed correctly. However, when I run the same command in visual studio I get the above error. I'm running visual studio code in admin mode and I installed heroku from admin mode as well.
I also enabled developer mode in my computer settings.
You need to set the execution policy regardless of whether you are running in administrator mode or not for PowerShell.
You can read more about this here
You can also see that it's throwing an error with regards to execution policy. The error basically means that windows could not verify the identity of the user that created the script and is blocking you from running it because it may be harmful (based on the fact that it could not verify the identity of the file creator).
This is just a counter-measure to prevent malicious scripts from running automatically.
If you want to run the script I would suggest running
Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy Unrestricted
and then running the Heroku commands. The above script removes restrictions on script executions on the current logged in user.
While installing the Weblogic in windows 10 using jar file, I am getting the error message as Unable to access or modify the system registry. Select Run as Administrator when opening the Command Prompt and try again. though am executing as Administrator. From the log file I got the below error.
WARNING [1] com.oracle.cie.common.jni.WinRegistryHelper - Create Key Failed: HKEY_LOCAL_MACHINE\Software\Oracle
2017-10-06 11:19:54,972 SEVERE [1] com.oracle.cie.nextgen.launcher.PlatformHelper - createRegistry to add a value failed
2017-10-06 11:19:54,972 SEVERE [1] com.oracle.cie.nextgen.launcher.Launcher - Unable to access or modify the system registry. Select Run as Administrator when opening the Command Prompt and try again.
I understood that on making the System Registry entry HKEY_LOCAL_MACHINE\Software\Oracle, it is failing because the same entry already exists in my system as HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE. Though system registry is case-insensitive, weblogic is failing on making entries to this registry. Is there any solution to overcome this? The same issue has been already posted in different sites but not yet answered.Any help to solve this issue will be really appreciable.
I had the same problem, the next lines works to solve the problem.
Open cmd like administrator.
java -d64 -jar fmw_12.2.1.3.0_wls.jar If you don't have correctly configured the JAVA_HOME, you can replace the word "java", for the path where you have installed de JDK. Something like this:
C:\JRockit\jdk1.8.0_144\bin\java.exe
I need to get MPICH2 working for my college project. But it appears I won't implement anything until I manage how to start MPICH2. For now I only try to run anything on my computer, nothing more. What I do:
I install the MPICH2 (from mpich.org/downloads, from the bottom of the site - the x86_64 Windows version) on my 64bit Windows 7 (I also tried the same with my 64bit Windows 8). I start the installer from a command line (run as an administrator), install MPICH2 for everybody (although my acc is the only one). After successful installation I run the wmpiregister.exe, where I type Danioss (it's the name of my account) and the password for this account. I click register, everything seems to be fine so far. Then I run wmpiconfig.exe, I don't change nor click anything and there is this error:
'g-pc: MPICH2 not installed or unable to query the host'
I can see on the left the table with my host name (g-pc) and the version of MPICH - 1.4.1p1. So it sees it is installed here but cannot query the host. I have no idea what that means.
Of course I tried to execute any compiled program but after running wmpiexec.exe, choosing the file and clicking Execute - I get
'Credentials for Danioss rejected connecting to g-PC
Aborting: Unable to connect to g-PC'
I tried running every .exe as an administrator, didn't help. I also installed and reinstalled the whole MPICH2 tens of times (literally - tens) trying different configurations. I also tried to install the 32bit version but that made no progress. I really have no idea what the problem is.
Please, help me!
Greetings,
Daniel
Try not specifying username after running wmpiexec -register. Just password for your current user. That worked well for me. Source: https://trac.mpich.org/projects/mpich/ticket/1151
First: crate a windows user password of your windows user acount
Second: go to installdir deform (C:\Program Files\SFTC\DEFORM\v10.2\3D)
Third: execute "wmpiregister.exe" and register user name and password that your windows user name and password
start deform on multiprocessor
good work
You need to run wmpiregister.exe which is in bin folder, to register your Windows user.
Register using mpiexec -register with ".\" before the username, in your case: .\Danioss.
I am using the datastax-community-64bit_1.2.5.msi for installing on Windows VM. I am using the silent install command
msiexec /i
C:\ddapplications\cassandra\datastax-community-64bit_1.2.5.msi /quiet
/qn /le C:\ddapplications\cassandra\installlog.txt
If I run the installation command from the command line it installs as expected. No issues.
If I run the command from a Windows Service that runs as LocalSystem, I get the following error.
Is this a known issue? Is there a workaround? I also manually tried creating a group named WORKGROUP and adding the SYSTEM user to that group.
The SYSTEM user exists in the VM.
=== Logging started: 6/7/2013 23:52:23 === Error 1609. An error occurred while applying security settings. WORKGROUP\SYSTEM is not a
valid user or group. This could be a problem with the package, or a
problem connecting to a domain controller on the network. Check your
network connection and click Retry, or Cancel to end the install.
Unable to locate the user's SID, system error 1332
=== Logging stopped: 6/7/2013 23:52:25 ===
Is your VM in a domain? What is the service that you are using to trigger the installer running as?
A possible workaround may be to make that service run as Administrator.