I have multiple vagrant provisions (shell scripts), and I would like to redirect all command output to a file while keeping the echo output in stdout.
Currently I redirect all output by doing
exec &>> provision.log
At the beginning of each provision
Which works great, but console is empty. So I would like to redirect everything but the echo commands to a file.
If there would be a possibility of redirecting all output (including echo) to a file and keeping only echo in stdout that would be the best.
Result should look like:
Console
Starting provision "master"
Updating packages...
Installing MySQL...
ERROR! check provision.log for details
provision.log
Starting provision "master"
Updating packages...
...
(output from apt-get)
...
Installing MySQL...
...
(output from apt-get install mysql-server-5.5)
...
ERROR! check provision.log for details
I do realize I could attach output redirect to every command but that is quite messy
You can take this approach of duplicating stdout file descriptor and using a custom echo function redirecting to duplicate file descriptor.
#!/bin/bash
# open fd=3 redirecting to 1 (stdout)
exec 3>&1
# function echo to show echo output on terminal
echo() {
# call actual echo command and redirect output to fd=3 and log file
command echo "$#"
command echo "$#" >&3
}
# redirect stdout to a log file
exec >>logfile
printf "%s\n" "going to file"
date
echo "on stdout"
pwd
# close fd=3
exec 3>&-
You might redirect only stdout and keep stderr on the terminal. Of course your script should then echo to stderr, perhaps using echo something > /dev/stderr or echo something >&2
You could also redirect echo-s to /dev/tty which makes sense only if the script was started on a terminal (not e.g. thru at or crontab)
Related
Is it possible to redirect all of the output of a Bourne shell script to somewhere, but with shell commands inside the script itself?
Redirecting the output of a single command is easy, but I want something more like this:
#!/bin/sh
if [ ! -t 0 ]; then
# redirect all of my output to a file here
fi
# rest of script...
Meaning: if the script is run non-interactively (for example, cron), save off the output of everything to a file. If run interactively from a shell, let the output go to stdout as usual.
I want to do this for a script normally run by the FreeBSD periodic utility. It's part of the daily run, which I don't normally care to see every day in email, so I don't have it sent. However, if something inside this one particular script fails, that's important to me and I'd like to be able to capture and email the output of this one part of the daily jobs.
Update: Joshua's answer is spot-on, but I also wanted to save and restore stdout and stderr around the entire script, which is done like this:
# save stdout and stderr to file
# descriptors 3 and 4,
# then redirect them to "foo"
exec 3>&1 4>&2 >foo 2>&1
# ...
# restore stdout and stderr
exec 1>&3 2>&4
Addressing the question as updated.
#...part of script without redirection...
{
#...part of script with redirection...
} > file1 2>file2 # ...and others as appropriate...
#...residue of script without redirection...
The braces '{ ... }' provide a unit of I/O redirection. The braces must appear where a command could appear - simplistically, at the start of a line or after a semi-colon. (Yes, that can be made more precise; if you want to quibble, let me know.)
You are right that you can preserve the original stdout and stderr with the redirections you showed, but it is usually simpler for the people who have to maintain the script later to understand what's going on if you scope the redirected code as shown above.
The relevant sections of the Bash manual are Grouping Commands and I/O Redirection. The relevant sections of the POSIX shell specification are Compound Commands and I/O Redirection. Bash has some extra notations, but is otherwise similar to the POSIX shell specification.
Typically we would place one of these at or near the top of the script. Scripts that parse their command lines would do the redirection after parsing.
Send stdout to a file
exec > file
with stderr
exec > file
exec 2>&1
append both stdout and stderr to file
exec >> file
exec 2>&1
As Jonathan Leffler mentioned in his comment:
exec has two separate jobs. The first one is to replace the currently executing shell (script) with a new program. The other is changing the I/O redirections in the current shell. This is distinguished by having no argument to exec.
You can make the whole script a function like this:
main_function() {
do_things_here
}
then at the end of the script have this:
if [ -z $TERM ]; then
# if not run via terminal, log everything into a log file
main_function 2>&1 >> /var/log/my_uber_script.log
else
# run via terminal, only output to screen
main_function
fi
Alternatively, you may log everything into logfile each run and still output it to stdout by simply doing:
# log everything, but also output to stdout
main_function 2>&1 | tee -a /var/log/my_uber_script.log
For saving the original stdout and stderr you can use:
exec [fd number]<&1
exec [fd number]<&2
For example, the following code will print "walla1" and "walla2" to the log file (a.txt), "walla3" to stdout, "walla4" to stderr.
#!/bin/bash
exec 5<&1
exec 6<&2
exec 1> ~/a.txt 2>&1
echo "walla1"
echo "walla2" >&2
echo "walla3" >&5
echo "walla4" >&6
[ -t <&0 ] || exec >> test.log
I finally figured out how to do it. I wanted to not just save the output to a file but also, find out if the bash script ran successfully or not!
I've wrapped the bash commands inside a function and then called the function main_function with a tee output to a file. Afterwards, I've captured the output using if [ $? -eq 0 ].
#! /bin/sh -
main_function() {
python command.py
}
main_function > >(tee -a "/var/www/logs/output.txt") 2>&1
if [ $? -eq 0 ]
then
echo 'Success!'
else
echo 'Failure!'
fi
I am working with a shell script to run my analyses. To make sure, I can confirm the correct commands were executed, I am writing the complete STDOUT/STDERR output into a file
My script looks like that:
#!/bin/bash
# Here are some pliminary stuff
echo " this goes still to the STDOUT to control the begining of the script"
#### execute all output to log files
# to set a log file, where all echo command will be redirected into.
touch $projectName\_logfile.txt # creating the log file
exec &> $projectName\_logfile.txt # direct all output to the log file
echo "1. These steps should be written to the log file"
# exit
# exec >&-
echo "2. 2. these steps should be written to the STDOUT again!"
# The script should be able to continue here ...
As you can see I have tried both using the exit command as well as closing the file descriptor using exec again. But both have failed.
I would appreciate your help to understand how to close the connection to the log file and redirect everything back to the STDOUT/STDERR.
thanks
Assa
I would rather consider this way:
echo "to out 1"
{
echo "to log 1"
echo "to log 2"
} &> ./_logfile.txt
echo "to out 2"
Anyway if You still need to use Your approach then You need to save original file descriptors:
exec 3<&1 # save original stdout to 3
exec 4<&2 # save original stderr to 4
And then restore:
exec 1>&3 # restore original stdout
exec 2>&4 # restore original stderr
Your example:
#!/bin/env bash
echo " this goes still to the STDOUT to control the begining of the script"
touch ./_logfile.txt # touch the log file
exec 3<&1 # save original stdout to 3
exec 4<&2 # save original stderr to 4
exec &> ./_logfile.txt # direct all out and err to the log file
echo "1. These steps should be written to the log file"
exec 1>&3 # restore original stdout
exec 2>&4 # restore original stderr
echo "2. 2. these steps should be written to the STDOUT again!"
# The script should be able to continue here ...
I have a peculiar case here which can be summed up as follows:
I want the entire error/stdout messages to be redirected to a file from my script but also there is one particular line which i want to redirect to terminal and also redirect that to the file.
This is the code:
exec &>test.log
echo "Check if this line is going to test.log"
echo "This should go to stderr" >> /dev/stderr
Now the last line should go to both stderr and test.log.
Can this be achieved somehow in bash ?
Yes, the tee command allows you to direct output to one or more files, as well as stdout.
As you pointed out in a comment, this doesn't work by itself because of the exec command.
This should do what you want:
exec 3>&1 1>test.log
echo "Check if this line is going to test.log"
exec 1>&3 3>&-
echo "Maybe this should go to stderr" | tee -a test.log >> /dev/stderr
I got the information about the way to restore stderr by properly setting up the original exec, from here, and combined it with tee.
Is it possible to redirect all of the output of a Bourne shell script to somewhere, but with shell commands inside the script itself?
Redirecting the output of a single command is easy, but I want something more like this:
#!/bin/sh
if [ ! -t 0 ]; then
# redirect all of my output to a file here
fi
# rest of script...
Meaning: if the script is run non-interactively (for example, cron), save off the output of everything to a file. If run interactively from a shell, let the output go to stdout as usual.
I want to do this for a script normally run by the FreeBSD periodic utility. It's part of the daily run, which I don't normally care to see every day in email, so I don't have it sent. However, if something inside this one particular script fails, that's important to me and I'd like to be able to capture and email the output of this one part of the daily jobs.
Update: Joshua's answer is spot-on, but I also wanted to save and restore stdout and stderr around the entire script, which is done like this:
# save stdout and stderr to file
# descriptors 3 and 4,
# then redirect them to "foo"
exec 3>&1 4>&2 >foo 2>&1
# ...
# restore stdout and stderr
exec 1>&3 2>&4
Addressing the question as updated.
#...part of script without redirection...
{
#...part of script with redirection...
} > file1 2>file2 # ...and others as appropriate...
#...residue of script without redirection...
The braces '{ ... }' provide a unit of I/O redirection. The braces must appear where a command could appear - simplistically, at the start of a line or after a semi-colon. (Yes, that can be made more precise; if you want to quibble, let me know.)
You are right that you can preserve the original stdout and stderr with the redirections you showed, but it is usually simpler for the people who have to maintain the script later to understand what's going on if you scope the redirected code as shown above.
The relevant sections of the Bash manual are Grouping Commands and I/O Redirection. The relevant sections of the POSIX shell specification are Compound Commands and I/O Redirection. Bash has some extra notations, but is otherwise similar to the POSIX shell specification.
Typically we would place one of these at or near the top of the script. Scripts that parse their command lines would do the redirection after parsing.
Send stdout to a file
exec > file
with stderr
exec > file
exec 2>&1
append both stdout and stderr to file
exec >> file
exec 2>&1
As Jonathan Leffler mentioned in his comment:
exec has two separate jobs. The first one is to replace the currently executing shell (script) with a new program. The other is changing the I/O redirections in the current shell. This is distinguished by having no argument to exec.
You can make the whole script a function like this:
main_function() {
do_things_here
}
then at the end of the script have this:
if [ -z $TERM ]; then
# if not run via terminal, log everything into a log file
main_function 2>&1 >> /var/log/my_uber_script.log
else
# run via terminal, only output to screen
main_function
fi
Alternatively, you may log everything into logfile each run and still output it to stdout by simply doing:
# log everything, but also output to stdout
main_function 2>&1 | tee -a /var/log/my_uber_script.log
For saving the original stdout and stderr you can use:
exec [fd number]<&1
exec [fd number]<&2
For example, the following code will print "walla1" and "walla2" to the log file (a.txt), "walla3" to stdout, "walla4" to stderr.
#!/bin/bash
exec 5<&1
exec 6<&2
exec 1> ~/a.txt 2>&1
echo "walla1"
echo "walla2" >&2
echo "walla3" >&5
echo "walla4" >&6
[ -t <&0 ] || exec >> test.log
I finally figured out how to do it. I wanted to not just save the output to a file but also, find out if the bash script ran successfully or not!
I've wrapped the bash commands inside a function and then called the function main_function with a tee output to a file. Afterwards, I've captured the output using if [ $? -eq 0 ].
#! /bin/sh -
main_function() {
python command.py
}
main_function > >(tee -a "/var/www/logs/output.txt") 2>&1
if [ $? -eq 0 ]
then
echo 'Success!'
else
echo 'Failure!'
fi
Is it possible to redirect all of the output of a Bourne shell script to somewhere, but with shell commands inside the script itself?
Redirecting the output of a single command is easy, but I want something more like this:
#!/bin/sh
if [ ! -t 0 ]; then
# redirect all of my output to a file here
fi
# rest of script...
Meaning: if the script is run non-interactively (for example, cron), save off the output of everything to a file. If run interactively from a shell, let the output go to stdout as usual.
I want to do this for a script normally run by the FreeBSD periodic utility. It's part of the daily run, which I don't normally care to see every day in email, so I don't have it sent. However, if something inside this one particular script fails, that's important to me and I'd like to be able to capture and email the output of this one part of the daily jobs.
Update: Joshua's answer is spot-on, but I also wanted to save and restore stdout and stderr around the entire script, which is done like this:
# save stdout and stderr to file
# descriptors 3 and 4,
# then redirect them to "foo"
exec 3>&1 4>&2 >foo 2>&1
# ...
# restore stdout and stderr
exec 1>&3 2>&4
Addressing the question as updated.
#...part of script without redirection...
{
#...part of script with redirection...
} > file1 2>file2 # ...and others as appropriate...
#...residue of script without redirection...
The braces '{ ... }' provide a unit of I/O redirection. The braces must appear where a command could appear - simplistically, at the start of a line or after a semi-colon. (Yes, that can be made more precise; if you want to quibble, let me know.)
You are right that you can preserve the original stdout and stderr with the redirections you showed, but it is usually simpler for the people who have to maintain the script later to understand what's going on if you scope the redirected code as shown above.
The relevant sections of the Bash manual are Grouping Commands and I/O Redirection. The relevant sections of the POSIX shell specification are Compound Commands and I/O Redirection. Bash has some extra notations, but is otherwise similar to the POSIX shell specification.
Typically we would place one of these at or near the top of the script. Scripts that parse their command lines would do the redirection after parsing.
Send stdout to a file
exec > file
with stderr
exec > file
exec 2>&1
append both stdout and stderr to file
exec >> file
exec 2>&1
As Jonathan Leffler mentioned in his comment:
exec has two separate jobs. The first one is to replace the currently executing shell (script) with a new program. The other is changing the I/O redirections in the current shell. This is distinguished by having no argument to exec.
You can make the whole script a function like this:
main_function() {
do_things_here
}
then at the end of the script have this:
if [ -z $TERM ]; then
# if not run via terminal, log everything into a log file
main_function 2>&1 >> /var/log/my_uber_script.log
else
# run via terminal, only output to screen
main_function
fi
Alternatively, you may log everything into logfile each run and still output it to stdout by simply doing:
# log everything, but also output to stdout
main_function 2>&1 | tee -a /var/log/my_uber_script.log
For saving the original stdout and stderr you can use:
exec [fd number]<&1
exec [fd number]<&2
For example, the following code will print "walla1" and "walla2" to the log file (a.txt), "walla3" to stdout, "walla4" to stderr.
#!/bin/bash
exec 5<&1
exec 6<&2
exec 1> ~/a.txt 2>&1
echo "walla1"
echo "walla2" >&2
echo "walla3" >&5
echo "walla4" >&6
[ -t <&0 ] || exec >> test.log
I finally figured out how to do it. I wanted to not just save the output to a file but also, find out if the bash script ran successfully or not!
I've wrapped the bash commands inside a function and then called the function main_function with a tee output to a file. Afterwards, I've captured the output using if [ $? -eq 0 ].
#! /bin/sh -
main_function() {
python command.py
}
main_function > >(tee -a "/var/www/logs/output.txt") 2>&1
if [ $? -eq 0 ]
then
echo 'Success!'
else
echo 'Failure!'
fi