I started to learn Racket and I don't know how to check if a list is found in another list. Something like (member x (list 1 2 3 x 4 5)), but I want that "x" to be a a sequence of numbers.
I know how to implement recursive, but I would like to know if it exists a more direct operator.
For example I want to know if (list 3 4 5) is found in (list 1 2 3 4 5 6 )
I would take a look at this Racket Object interface and the (is-a? v type) -> boolean seems to be what you are looking for?, simply use it while looping to catch any results that are of a given type and do whatever with them
you may also want to look into (subclass? c cls) -> boolean from the same link, if you want to catch all List types in one go
should there be a possiblity of having a list inside a list, that was already inside a list(1,2,(3,4,(5,6))) i'm afraid that recursion is probally the best solution though, since given there is a possibility of an infinit amount of loops, it is just better to run the recursion on a list everytime you locate a new list in the original list, that way any given number of subList will still be processed
You want to search for succeeding elements in a list:
(define (subseq needle haystack)
(let loop ((index 0)
(cur-needle needle)
(haystack haystack))
(cond ((null? cur-needle) index)
((null? haystack) #f)
((and (equal? (car cur-needle) (car haystack))
(loop index (cdr cur-needle) (cdr haystack)))) ; NB no consequence
(else (loop (add1 index) needle (cdr haystack))))))
This evaluates to the index where the elements of needle is first found in the haystack or #f if it isn't.
You can use regexp-match to check if pattern is a substring of another string by converting both lists of numbers to strings, and comparing them, as such:
(define (member? x lst)
(define (f lst)
(foldr string-append "" (map number->string lst)))
(if (regexp-match (f x) (f lst)) #t #f))
f converts lst (a list of numbers) to a string. regexp-match checks if (f x) is a pattern that appears in (f lst).
For example,
> (member? (list 3 4 5) (list 1 2 3 4 5 6 7))
#t
One can also use some string functions to join the lists and compare them (recursion is needed):
(define (list-in-list l L)
(define (fn ll)
(string-join (map number->string ll))) ; Function to create a string out of list of numbers;
(define ss (fn l)) ; Convert smaller list to string;
(let loop ((L L)) ; Set up recursion and initial value;
(cond
[(empty? L) #f] ; If end of list reached, pattern is not present;
[(string-prefix? (fn L) ss) #t] ; Compare if initial part of main list is same as test list;
[else (loop (rest L))]))) ; If not, loop with first item of list removed;
Testing:
(list-in-list (list 3 4 5) (list 1 2 3 4 5 6 ))
Output:
#t
straight from the Racket documentation:
(member v lst [is-equal?]) → (or/c list? #f)
v : any/c
lst : list?
is-equal? : (any/c any/c -> any/c) = equal?
Locates the first element of lst that is equal? to v. If such an element exists, the tail of lst starting with that element is returned. Otherwise, the result is #f.
Or in your case:
(member '(3 4 5) (list 1 2 3 4 5 6 7))
where x is '(3 4 5) or (list 3 4 5) or (cons 3 4 5)
it will return '(3 4 5 6 7) if x ( searched list '(3 4 5) ) was found in the list or false (#f) if it was not found
or you can use assoc to check if your x is met in one of many lists, or :
(assoc x (list (list 1 2) (list 3 4) (list x 6)))
will return :
'(x 6)
There are also lambda constructions but I will not go in depth since I am not very familiar with Racket yet. Hope this helps :)
EDIT: if member gives you different results than what you expect try using memq instead
Related
For the built-in function foldr, I know the function blueprint is the following:
(foldr combine base alist)
combine is supposed to take in two parameters:
an item that foldr consumes
the result of applying foldr to the rest of alist
I cannot seem to understand how to put point #2 in parameter form ever. How did you do it?
combine is not a built-in function. I would have to code it myself based on the requirements.
Think of second parameter as the accumulated value so far. For example, if we are adding the elements, then acc is the sum of all the previous eles and we need to add the current element:
(foldr (lambda (ele acc) (+ ele acc))
0 ; we're adding numbers, so the base is 0
'(1 2 3 4 5))
=> 15
Another example - if we're copying the list, then acc contains the previous eles in the list (starting from the last one and going back from there) and we have to cons the current element at the head :
(foldr (lambda (ele acc) (cons ele acc))
'() ; we're creating a list, so the base is an empty list
'(1 2 3 4 5))
=> '(1 2 3 4 5)
The exact nature of acc depends on the problem to be solved, but you should be able get the idea from the previous examples.
Think of it as the result computed so far and that foldr iterates from end to beginning while a foldl iterates from beginning to end. It's easier to see if you look at a simple implementation of it:
(define (foldr1 f init lst)
(let r ((lst lst))
(if (null? lst)
init
(cons (f (car lst)) (r (cdr lst))))))
(foldr1 combine base '(1 2 3)) ; ==
(combine 1 (combine 2 (combine 3 base)))
(define (foldl1 f init lst)
(let r ((lst lst) (acc init))
(if (null? lst)
acc
(r (cdr lst) (f (car lst))))))
(foldl1 combine base '(1 2 3)) ; ==
(combine 3 (combine 2 (combine 1 base)))
Also note that the order or the arguments change in some implementations. Racket and SRFI-1 always have the accumulator as the last argument, but in R6RS the argument order changes for fold-left (but not fold-right):
#!r6rs
(import (rnrs))
;; swap argument order
(fold-left (lambda (acc e) (cons e acc)) '() '(1 2 3))
; ==> (3 2 1)
I wrote a function which finds all the subsets of a list already and it works. I'm trying to write a second function where I get all the subsets of N length, but it's not working very well.
This is my code:
(define (subset_length_n n lst)
(cond
[(empty? lst) empty]
[else (foldr (lambda (x y) (if (equal? (length y) n) (cons y x) x)) empty (powerset lst))]
))
where (powerset lst) gives a list of all the subsets.
Am I misunderstanding the purpose of foldr?
I was thinking that the program would go through each element of the list of subsets, compare the length to n, cons it onto the empty list if there the same, ignore it if it's not.
But (subset_length_n 2 (list 1 2 3)) gives me (list (list 1 2) 1 2 3) when I want (list (list 1 2) (list 1 3) (list 2 3))
Thanks in advance
When using foldr you don't have to test if the input list is empty, foldr takes care of that for you. And this seems like a job better suited for filter:
(define (subset_length_n n lst)
(filter (lambda (e) (= (length e) n))
(powerset lst)))
If you must, you can use foldr for this, but it's a rather contrived solution. You were very close to getting it right! in your code, just change the lambda's parameters, instead of (x y) write (y x). See how a nice indentation and appropriate parameter names go a long way toward writing correct solutions:
(define (subset_length_n n lst)
(foldr (lambda (e acc)
(if (= (length e) n)
(cons e acc)
acc))
empty
(powerset lst)))
Anyway, it works as expected:
(subset_length_n 4 '(1 2 3 4 5))
=> '((1 2 3 4) (1 2 3 5) (1 2 4 5) (1 3 4 5) (2 3 4 5))
You are given a list of strings.
Generate a procedure such that applying this procedure to such a list
would result in a list of the lengths of each of the strings in the
input.
Use map, filter, or fold-right.
(lengths (list "This" "is" "not" "fun")) => (4 2 3 3)
(define lengths (lambda (lst) your_code_here))
I got stuck in the following code and I do not understand how can I use filter.
(define lengths
(lambda (lst)
(if (null? lst)
nil
(fold-right list (string-length (car lst)) (cdr lst)))))
This seems like a work for map, you just have to pass the right procedure as a parameter:
(define (lengths lst)
(map string-length lst))
As you should know, map applies a procedure to each of the elements in the input list, returning a new list collecting the results. If we're interested in building a list with the lengths of strings, then we call string-length on each element. The procedure pretty much writes itself!
A word of advice: read the documentation of the procedures you're being asked to use, the code you're writing is overly complicated. This was clearly not a job for filter, although fold-right could have been used, too. Just remember: let the higher-order procedure take care of the iteration, you don't have to do it explicitly:
(define (lengths lst)
(fold-right (lambda (x a)
(cons (string-length x) a))
'()
lst))
This looks like homework so I'll only give you pointers:
map takes a procedure and applies to to every element of a list. Thus
(define (is-strings lst)
(map string? lst))
(is-strings '("hello" 5 sym "89")) ; (#t #f #f #t)
(define (add-two lst)
(map (lambda (x) (+ x 2)) lst))
(add-two '(3 4 5 6)) ; ==> (5 6 7 8)
filter takes procedure that acts as a predicate. If #f the element is omitted, else the element is in the resulting list.
(define (filter-strings lst)
(filter string? lst))
(filter-strings '(3 5 "hey" test "you")) ; ==> ("hey" "you")
fold-right takes an initial value and a procedure that takes an accumulated value and a element and supposed to generate a new value:
(fold-right + 0 '(3 4 5 6)) ; ==> 18, since its (+ 3 (+ 4 (+ 5 (+ 6 0))))
(fold-right cons '() '(a b c d)) ; ==> (a b c d) since its (cons a (cons b (cons c (cons d '()))))
(fold-right - 0 '(1 2 3)) ; ==> -2 since its (- 1 (- 2 (- 3 0)))
(fold-right (lambda (e1 acc) (if (<= acc e1) acc e1)) +Inf.0 '(7 6 2 3)) ; ==> 2
fold-right has a left handed brother that is iterative and faster, though for list processing it would reverse the order after processing..
(fold-left (lambda (acc e1) (cons e1 acc)) '() '(1 2 3 4)) ; ==> (4 3 2 1)
(cons 2 (cons ( cons 2 3 ) (cons 4 5 )))
This gives me a list that looks like this : (2 (2 . 3) 4 . 5) when I try to count the number of elements in this list the output is 3 as exepected.
How do I calculate the number of individual elements of a pair ? The output in this case should be 5 for example.
Here's a possible solution, the question is essentially asking for the number of atoms in a list structure (not necessarily null-terminated proper lists):
(define (count-all seq)
(cond ((null? seq) 0)
((not (pair? seq)) 1)
(else (+ (count-all (car seq))
(count-all (cdr seq))))))
It works on sequences of elements like this:
If the sequence is empty, it has zero elements
If the sequence is not a cons cell (a pair of elements), it's because it's a single element - an atom
Otherwise add the elements of both the car and the cdr of the sequence
It works as expected for arbitrarily nested list structures:
(count-all '(2 (2 . 3) 4 . 5))
=> 5
(count-all '(1 (2 . (3 (4 . 5) 6)) 7 . 8))
=> 8
We can solve this problem recursively for arbitrarily deeply nested lists.
(define (atom? x) (not (pair? x)))
(define (count-atoms lst)
(cond ((null? lst) 0) ; nothing to count, return 0
((atom? lst) 1) ; lst contains only one thing, return 1
(else ; otherwise, lst contains multiple elements
(+ (count-atoms (car lst)) ; add the number of atoms in the first position
(count-atoms (cdr lst)))))) ; to the number of atoms in the rest of the list
EDIT: This is a duplicate to Oscar's answer. I did not see that he had answered when I hit submit, but will leave this here since I feel the comments are useful.
I wonder whether '(1 . 2) and '(1 2) mean the same data (equal to each other) in Scheme or not? I think they are the same thing, is this correct?
No, they are not the same.
'(1 . 2) means (cons 1 2)
whereas
'(1 2) means (cons 1 (cons 2 nil))
(1 . 2) is sometimes called an improper list, because it is not NIL terminated. (1 2) represented in dot form may be written (1 2 . NIL), but you should not write something like this.
dr rackect explains it much more clearer:
"A pair joins two arbitrary values.....The cons procedure constructs pairs"
(cons 1 2)
'(1 . 2)
(pair? (cons 1 2))
#t
on the other hand
"A list is a combination of pairs that creates a linked list. More precisely, a list is either the empty list null, or it is a pair whose first element is a list element and whose second element is a list."
(cons 0 (cons 1 (cons 2 null)))
'(0 1 2)
http://docs.racket-lang.org/guide/pairs.html
please LISP has been around since the 50's for accurate answers look at their documentation and example they area around for more than 60 years some people was not even born there.
Yes!
Pairs: (cons y z) creates a pair between the values y and z. Likewise, the (more complicated) expression (cons x (cons y z)) creates a pair between x and the pair (y . z). You can also represent these pairs as '(y . z) and '(x . (y . z))
Lists: A list is just a special type of pair. It's the case where a value is paired onto an already-existing list. Since the very first list has to start somewhere, we always have the null list '() (sometimes called the 'empty list') ready to be paired. So (cons y '()) pairs y with the null list to become the one-item list '(y). Likewise, (cons x '(y)) and (cons x (cons y '())) pair x to the list '(y) to become the list '(x y).
listspairs
List must end with empty list (also termed as null). Below sample code on repl illustrates the difference.
> (cons 1 (cons 2 '())) ; I am a pair as well as list
'(1 2)
(pair? (cons 1 (cons 2 '())))
#t
> (list? (cons 1 (cons 2 '())))
#t
> (cons 1 (cons 2 3)) ;I am a pair but but not list
'(1 2 . 3)
> (pair? (cons 1 (cons 2 3)))
#t
> (list? (cons 1 (cons 2 3)))
#f