I am using Vagrant and Homestead for laravel development. After updgrading my VM, when I vagrant up from Homestead root location I got an error:
$ vagrant up
Bringing machine 'homestead-7' up with 'virtualbox' provider...
==> homestead-7: Importing base box 'laravel/homestead'...
==> homestead-7: Matching MAC address for NAT networking...
==> homestead-7: Checking if box 'laravel/homestead' is up to date...
==> homestead-7: Setting the name of the VM: homestead-7
==> homestead-7: Clearing any previously set network interfaces...
==> homestead-7: Preparing network interfaces based on configuration...
homestead-7: Adapter 1: nat
homestead-7: Adapter 2: hostonly
==> homestead-7: Forwarding por`enter code here`ts...
homestead-7: 80 (guest) => 8000 (host) (adapter 1)
homestead-7: 443 (guest) => 44300 (host) (adapter 1)
homestead-7: 3306 (guest) => 33060 (host) (adapter 1)
homestead-7: 5432 (guest) => 54320 (host) (adapter 1)
homestead-7: 8025 (guest) => 8025 (host) (adapter 1)
homestead-7: 27017 (guest) => 27017 (host) (adapter 1)
homestead-7: 22 (guest) => 2222 (host) (adapter 1)
==> homestead-7: Running 'pre-boot' VM customizations...
==> homestead-7: Booting VM...
==> homestead-7: Waiting for machine to boot. This may take a few minutes...
homestead-7: SSH address: 127.0.0.1:2222
homestead-7: SSH username: vagrant
homestead-7: SSH auth method: private key
homestead-7: Warning: Remote connection disconnect. Retrying...
homestead-7:
homestead-7: Vagrant insecure key detected. Vagrant will automatically repla ce
homestead-7: this with a newly generated keypair for better security.
homestead-7:
homestead-7: Inserting generated public key within guest...
homestead-7: Removing insecure key from the guest if it's present...
homestead-7: Key inserted! Disconnecting and reconnecting using new SSH key. ..
==> homestead-7: Machine booted and ready!
==> homestead-7: Checking for guest additions in VM...
==> homestead-7: Setting hostname...
==> homestead-7: Configuring and enabling network interfaces...
==> homestead-7: Mounting shared folders...
homestead-7: /vagrant => D:/Development/homestead
Vagrant was unable to mount VirtualBox shared folders. This is usually
because the filesystem "vboxsf" is not available. This filesystem is
made available via the VirtualBox Guest Additions and kernel module.
Please verify that these guest additions are properly installed in the
guest. This is not a bug in Vagrant and is usually caused by a faulty
Vagrant box. For context, the command attempted was:
mount -t vboxsf -o uid=1000,gid=1000 vagrant /vagrant
enter code here
The error output from the command was:
: No such file or directory
Related
I am trying to install homestead on windows 10 and I have this warning messages on start-up, I can ( vagrant ssh & ping ) the VB machine but the local website refuses connection.
$ vagrant up
Bringing machine 'homestead' up with 'virtualbox' provider...
==> homestead: Checking if box 'laravel/homestead' version '9.6.0' is up to date...
==> homestead: Clearing any previously set forwarded ports...
==> homestead: Clearing any previously set network interfaces...
==> homestead: Preparing network interfaces based on configuration...
homestead: Adapter 1: nat
homestead: Adapter 2: hostonly
==> homestead: Forwarding ports...
homestead: 80 (guest) => 8000 (host) (adapter 1)
homestead: 443 (guest) => 44300 (host) (adapter 1)
homestead: 3306 (guest) => 33060 (host) (adapter 1)
homestead: 4040 (guest) => 4040 (host) (adapter 1)
homestead: 5432 (guest) => 54320 (host) (adapter 1)
homestead: 8025 (guest) => 8025 (host) (adapter 1)
homestead: 9600 (guest) => 9600 (host) (adapter 1)
homestead: 27017 (guest) => 27017 (host) (adapter 1)
homestead: 22 (guest) => 2222 (host) (adapter 1)
==> homestead: Running 'pre-boot' VM customizations...
==> homestead: Booting VM...
==> homestead: Waiting for machine to boot. This may take a few minutes...
homestead: SSH address: 127.0.0.1:2222
homestead: SSH username: vagrant
homestead: SSH auth method: private key
homestead: Warning: Connection reset. Retrying...
homestead: Warning: Connection aborted. Retrying...
==> homestead: Machine booted and ready!
==> homestead: Checking for guest additions in VM...
==> homestead: Setting hostname...
==> homestead: Configuring and enabling network interfaces...
==> homestead: Mounting shared folders...
homestead: /vagrant => D:/homestead
homestead: /home/vagrant/code => D:/Homestead_Projects
==> homestead: Detected mount owner ID within mount options. (uid: 1000 guestpath: /home/vagrant/code)
==> homestead: Detected mount group ID within mount options. (gid: 1000 guestpath: /home/vagrant/code)
==> homestead: Machine already provisioned. Run `vagrant provision` or use the `--provision`
==> homestead: flag to force provisioning. Provisioners marked to run always will still run.
You don't need to run this command, vagrant up command is just for installation, and your installation is successfully done you need to run this command.
Run this command, I think it should help you :
vagrant provision
if you turn off your pc then you need to run this command.
vagrant reload --provision
I am trying to setup homestead and laravel on a vagrant box. I get the error 'no input file specified' when I browse to my url:
http://homestead.app/, I have this setup in my hosts file 192.168.10.10 homestead.app
My current Homestead.yaml file is located in c:/users/me/Homestead and looks like this:
---
ip: "192.168.10.10"
memory: 2048
cpus: 1
provider: virtualbox
authorize: ~/.ssh/id_rsa.pub
keys:
- ~/.ssh/id_rsa
folders:
- map: C:/Sites/Homestead_Projects
to: /home/vagrant/Sites
sites:
- map: homestead.app
to: /home/vagrant/code/laravel/public
databases:
- homestead
WHen I run vagrant up I get this message:
Bringing machine 'homestead-7' up with 'virtualbox' provider...
==> homestead-7: Checking if box 'laravel/homestead' is up to date...
==> homestead-7: Machine already provisioned. Run `vagrant provision` or use the `--provision`
==> homestead-7: flag to force provisioning. Provisioners marked to run always will still run.
PS C:\Users\me\Homestead>
My project files I would like to be stored in, C:\sites\Homestead_Projects this is empty at the moment.
Can anyone advise how I can get my laravel site up and running?
My Virtualbox states homestead is running
Git bash shows homestead installed:
I also have a basic laravel site installed in my local folder:
Where do I install Laravel and how can I get a basic site setup?
Here is my powershell when I reload:
PS C:\Users\Becky\Homestead> vagrant reload --provision
==> homestead-7: Attempting graceful shutdown of VM...
==> homestead-7: Checking if box 'laravel/homestead' is up to date...
==> homestead-7: Clearing any previously set forwarded ports...
==> homestead-7: Clearing any previously set network interfaces...
==> homestead-7: Preparing network interfaces based on configuration...
homestead-7: Adapter 1: nat
homestead-7: Adapter 2: hostonly
==> homestead-7: Forwarding ports...
homestead-7: 80 (guest) => 8000 (host) (adapter 1)
homestead-7: 443 (guest) => 44300 (host) (adapter 1)
homestead-7: 3306 (guest) => 33060 (host) (adapter 1)
homestead-7: 4040 (guest) => 4040 (host) (adapter 1)
homestead-7: 5432 (guest) => 54320 (host) (adapter 1)
homestead-7: 8025 (guest) => 8025 (host) (adapter 1)
homestead-7: 27017 (guest) => 27017 (host) (adapter 1)
homestead-7: 22 (guest) => 2222 (host) (adapter 1)
==> homestead-7: Running 'pre-boot' VM customizations...
==> homestead-7: Booting VM...
==> homestead-7: Waiting for machine to boot. This may take a few minutes...
homestead-7: SSH address: 127.0.0.1:2222
homestead-7: SSH username: vagrant
homestead-7: SSH auth method: private key
==> homestead-7: Machine booted and ready!
==> homestead-7: Checking for guest additions in VM...
==> homestead-7: Setting hostname...
==> homestead-7: Configuring and enabling network interfaces...
==> homestead-7: Mounting shared folders...
homestead-7: /vagrant => C:/Users/Becky/Homestead
homestead-7: /home/vagrant/Sites => C:/sites/Homestead_Projects
==> homestead-7: Running provisioner: file...
==> homestead-7: Running provisioner: shell...
homestead-7: Running: inline script
==> homestead-7: Running provisioner: shell...
homestead-7: Running: inline script
==> homestead-7: Running provisioner: shell...
homestead-7: Running: inline script
==> homestead-7: Running provisioner: shell...
homestead-7: Running: C:/Users/Becky/AppData/Local/Temp/vagrant-shell20171016-6452-167i9e9.sh
==> homestead-7: Running provisioner: shell...
homestead-7: Running: script: Creating Certificate: homestead.app
==> homestead-7: Running provisioner: shell...
homestead-7: Running: script: Creating Site: homestead.app
==> homestead-7: Running provisioner: shell...
homestead-7: Running: script: Checking for old Schedule
==> homestead-7: Running provisioner: shell...
homestead-7: Running: script: Restarting Nginx
==> homestead-7: Running provisioner: shell...
homestead-7: Running: script: Creating MySQL Database: homestead
==> homestead-7: Running provisioner: shell...
homestead-7: Running: script: Creating Postgres Database: homestead
==> homestead-7: Running provisioner: shell...
homestead-7: Running: script: Clear Variables
==> homestead-7: Running provisioner: shell...
homestead-7: Running: script: Update Composer
==> homestead-7: You are already using composer version 1.5.2 (stable channel).
==> homestead-7: Running provisioner: shell...
homestead-7: Running: C:/Users/Becky/AppData/Local/Temp/vagrant-shell20171016-6452-196tg7e.sh
==> homestead-7: Running provisioner: shell...
homestead-7: Running: C:/Users/Becky/AppData/Local/Temp/vagrant-shell20171016-6452-1v1vhk.sh
PS C:\Users\Becky\Homestead>
Your site should be homestead.app instead of homestead.localhost. in your Homestead.yaml file, or reversed for the hosts file. Try to change it and then run vagrant provision!
EDIT
Apply the following changes :
authorize: ~/.ssh/id_rsa.pub
keys:
- ~/.ssh/id_rsa
map: C:/Sites
to: /home/vagrant/Sites
I've been using vagrant to run laravel/lumen as well as just other general stuff such as node js scripts. I've run into problems installing some things using npm, and it seems that a solution working for a lot of people is just running the command line (or git bash in my case) as an administrator. However when I try this and use vagrant up, I get a long list of errors. I've also tried vagrant init which gives the same errors.
Here are the errors
$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'laravel/homestead' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 80 (guest) => 8000 (host) (adapter 1)
default: 443 (guest) => 44300 (host) (adapter 1)
default: 3306 (guest) => 33060 (host) (adapter 1)
default: 5432 (guest) => 54320 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
==> default: Setting hostname...
v==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
default: /vagrant => C:/Users/Andy McNally/Homestead
vag default: /home/vagrant/home => C:/Users/Andy McNally/home
r==> default: Machine already provisioned. Run `vagrant provision` or use
the `--provision`
==> default: flag to force provisioning. Provisioners marked to run always
will still run.
I'm trying to get a Homestead VM setup for my laravel project. I have followed the instructions here exactly. The only difference is the folder I put the Homestead directory in; I simply put it in C:/.
Otherwise I have set up the Vagrant box, cloned and inited Homestead, and set up the homestead.yaml file exactly as instructed. I then start the VM with vagrant ssh. When I use ls to view the folders in the mapped directory - nothing.
This is my homestead.yaml file:
p: "192.168.10.10"
memory: 2048
cpus: 1
provider: virtualbox
authorize: ~/ssh/id_rsa.pub
keys:
- ~/ssh/id_rsa.pub
folders:
- map: c:/laravelprojects
to: /home/vagrant/Code
sites:
- map: app.dev
to: /home/vagrant/Code/username/public
databases:
- homestead
When I run vagrant up, this is the output:
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Importing base box 'laravel/homestead'...
==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'laravel/homestead' is up to date...
==> default: Setting the name of the VM: homestead-7
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 80 (guest) => 8000 (host) (adapter 1)
default: 443 (guest) => 44300 (host) (adapter 1)
default: 3306 (guest) => 33060 (host) (adapter 1)
default: 5432 (guest) => 54320 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
default: Warning: Remote connection disconnect. Retrying...
default:
default: Vagrant insecure key detected. Vagrant will automatically replace
default: this with a newly generated keypair for better security.
default:
default: Inserting generated public key within guest...
default: Removing insecure key from the guest if it's present...
default: Key inserted! Disconnecting and reconnecting using new SSH key...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
==> default: Setting hostname...
==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
default: /vagrant => C:/Homestead
As you can see, the last two lines seem to be mounted the wrong folder, ie the folder the Vagrant machine is being started from. However, checking in Virtualbox shows that both this and the folder specified in the .yaml file are set and mapped.
What gives?
/vagrant is mounted by default from the project where Vagrantfile is.
I am not sure if it can be disable from homestead.yaml file directly, but you can edit the Vagrantfile and add
config.vm.synced_folder ".", "/vagrant", disabled: true
so it will not create a /vagrant directory in the VM and VirtualBox will show only your folder specified from the yaml.
Hey I have been trying to get my homestead running but I keep getting to the error:
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'laravel/homestead' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 80 => 8000 (adapter 1)
default: 443 => 44300 (adapter 1)
default: 3306 => 33060 (adapter 1)
default: 5432 => 54320 (adapter 1)
default: 22 => 2222 (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
default: Warning: Connection refused. Retrying...
default: Warning: Connection refused. Retrying...
default: Warning: Connection refused. Retrying...
I am running windows 10 and Virtual box 5.0.4
The error is happening right after the line 'default: SSH auth method: private key' and presents a connection refused error, so I assume it can be related to your ssh keys. Did you check if your ssh keys are set properly?
ssh-keygen -t rsa -C "you#homestead"
Try running this again and set your public and private key paths in the homestead.yaml file (make sure it points to the file properly) then try again.
If the problem persists show us your homestead.yaml file so we can try to help better :) I hope I could be of help