I want to create static library and something goes wrong. I have makefile:
static: main.c tree.c
gcc -c -Wall tree.c -o tree.o
ar crs libtree.a tree.o
gcc -Wall -static main.c -L. -ltree -o main
./main
When I write "make static", it shows me:
gcc -c -Wall tree.c -o tree.o
ar crs libtree.a tree.o
gcc -Wall -static main.c -L. -ltree -o main
ld: library not found for -lcrt0.o
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [static] Error 1
It created files: tree.o and libtree.a. I don't know why it doesn't want to find a library. Do you know how to solve it?
Most probably, your system is not set up for static linking. Most newer Linux distributions aren't as static linking is highly discouraged.
Look for a package named glibc-static or similar and install.
In case your system is not Linux (could be MacOS X as well, you didn't state that) - You're doomed. Static linking is not supported on that platform at all.
Related
I'm trying to link a static library archive file (libx/libx.a) with a C code. The library requires 2 flags (-lx -lpthread). After linking the static library my ultimate goal is to create a shared library. I have the following Make file,
rsa-engine: rsa/rsa.c rsa/bignum.c rsa/aes.c rsa/x509parse.c rsa/pem.c
gcc -fPIC -o rsa/rsa.o -c rsa/rsa.c
gcc -fPIC -o rsa/bignum.o -c rsa/bignum.c
gcc -fPIC -o rsa/aes.o -c rsa/aes.c
gcc -fPIC -o rsa/x509parse.o -c rsa/x509parse.c
gcc -fPIC -o rsa/pem.o -c rsa/pem.c
gcc -fPIC rsa-engine.c libx/libx.a -L.libx/ -lx -lpthread -o rsa-engine.o
gcc -shared -o librsa_engine.so -lcrypto rsa-engine.o rsa/rsa.o rsa/bignum.o rsa/aes.o rsa/x509parse.o rsa/pem.o
clean:
rm -f *.o rsa/*.o *.so rsa-engine
After using the make command it produces the following output,
/usr/bin/ld: cannot find -lx
collect2: error: ld returned 1 exit status
Makefile:2: recipe for target 'rsa-engine' failed
make: *** [rsa-engine] Error 1
I found similar questions here. But that did not help. Seems like I can't make the link work. Any help with what I'm doing wrong?
I would like to achieve the same result generated by the following command,
CC := gcc
CFLAGS := -Wall -g -MD -O2 -I ../
LDFLAGS := -lx -lpthread
tests_files := hello
all: $(tests_files)
hello: hello.o ../libx/libx.a
$(CC) $(CFLAGS) -static $(<) -L../libx/ $(LDFLAGS) -o $(#)
It seems that your libx.a is located in libx, yet -L references .libx directory. Anyway, since you reference libx/libx.a directly, you may skip both -L.libx/ -lx and it should link just fine.
I'm trying to compile a c++ program and I am having some issues. In particular, when I use x86_64-w64-mingw32-gcc as my compiler, it complains half way through my compilation saying "tmp/src/libfastms/solver/solver.cpp.o: file not recognized: File format not recognized".
Here is my makefile (not mine, I'm trying to adapt this makefile to a cygwin environment) https://pastebin.com/vgnVYJUL
Here is the console output when I run make:
x86_64-w64-mingw32-gcc -c -o tmp/src/libfastms/solver/solver.cpp.o src/libfastms/solver/solver.cpp -Wall -O3 -m64 -Isrc/libfastms -DDISABLE_OPENMP -DDISABLE_OPENCV -DDISABLE_CUDA
x86_64-w64-mingw32-gcc -c -o tmp/src/libfastms/solver/solver_base.cpp.o src/libfastms/solver/solver_base.cpp -Wall -O3 -m64 -Isrc/libfastms -DDISABLE_OPENMP -DDISABLE_OPENCV -DDISABLE_CUDA
x86_64-w64-mingw32-gcc -c -o tmp/src/libfastms/solver/solver_host.cpp.o src/libfastms/solver/solver_host.cpp -Wall -O3 -m64 -Isrc/libfastms -DDISABLE_OPENMP -DDISABLE_OPENCV -DDISABLE_CUDA
x86_64-w64-mingw32-gcc -c -o tmp/src/libfastms/util/has_cuda.cpp.o src/libfastms/util/has_cuda.cpp -Wall -O3 -m64 -Isrc/libfastms -DDISABLE_OPENMP -DDISABLE_OPENCV -DDISABLE_CUDA
x86_64-w64-mingw32-gcc -c -o tmp/src/libfastms/util/image_mat.cpp.o src/libfastms/util/image_mat.cpp -Wall -O3 -m64 -Isrc/libfastms -DDISABLE_OPENMP -DDISABLE_OPENCV -DDISABLE_CUDA
ld -r -o tmp/src/libfastms/libfastms.o tmp/src/libfastms/solver/solver.cpp.o tmp/src/libfastms/solver/solver_base.cpp.o tmp/src/libfastms/solver/solver_host.cpp.o tmp/src/libfastms/util/has_cuda.cpp.o tmp/src/libfastms/util/image_mat.cpp.o
tmp/src/libfastms/solver/solver.cpp.o: file not recognized: File format not recognized
Makefile:167: recipe for target 'tmp/src/libfastms/libfastms.o' failed
make: *** [tmp/src/libfastms/libfastms.o] Error 1
Some other notes:
I don't have this problem when I compile with g++ (only seems to be minGW)
A common solution to this problem is to clean the directory of residual object files. This does not work.
Another common reason for this is trying to compile .h files. Obviously I am not doing this.
Thanks in advance.
You are compiling your object files with a 64-bit compiler driver, w64-mingw32-gcc,
and with -m64 you are explicitly directing it to generate 64-bit code (unnecessarily,
as that is its default). But you are linking with a 32-bit linker that does not
understand 64-bit object files.
This is happening because in your makefile you are, unusually, invoking ld
explicitly for your incremental solver linkage:
COMMAND_LINK_SOLVER=ld -r -o $# $^
rather than delegating linkage to your compiler driver in the usual way, and
a 32-bit ld from a different toolchain is being found in your PATH before
the 64-bit one belonging to your mingw-w64 toolchain.
To avoid this, invoke the linker via the compiler driver as normal, which for your
solver linkage means:
COMMAND_LINK_SOLVER=$(GXX) -Wl,-r -o $# $^
You can depend on w64-mingw32-gcc to invoke the ld that was installed with it.
There is no need to correct your main linkage as it is already done the right way.
I have been trying to install libnids (Ubuntu LTS and Mac OS X) all the day and now I know how to compile programs with it.
I write this here because there is not much documentation but there are samples in the libnids downloaded folder with a makefile. The important things of this makefile are these:
CC = gcc
PCAPLIB = -lpcap
LNETLIB = -lnet
LIBS = -L../src -lnids $(PCAPLIB) $(LNETLIB) -lgthread-2.0 -lnsl
example:
$(CC) example.c -o example $(LIBS)
And if you're compiling it in Mac OS X ignore this: -lgthread-2.0 -lnsl -L../src
But I don't know if something stop to works because of these omitted things.
I found it. The best way is to compile the library and then use local reference to the ".a" file.
Makefile example
CC = gcc -g -Wall
GLIB = `pkg-config --cflags --libs glib-2.0`
PCAPLIB = -lpcap
LNETLIB = -lnet
LIBS_SRC = libnids-1.24/src/libnids.a
LIBS = $(PCAPLIB) $(LNETLIB) -lgthread-2.0
program: program.c
$(CC) -c $(CFLAGS) program.c -o program.o $(GLIB) $(LIBS)
$(CC) program.o -o program $(LIBS_SRC) $(GLIB) $(LIBS)
But if you want to compile the library and install it into your system you got to use -lnids instead of the above way. But the first solution always works.
I got errors when compiling samples under libnids:
gcc -o overflows overflows.o -L../src -lnids -lpcap -lnet -lgthread-2.0 -lnsl ../src/libnids.a
/usr/bin/ld: ../src/libnids.a(libnids.o): undefined reference to symbol 'g_async_queue_pop'
/lib/x86_64-linux-gnu/libglib-2.0.so.0: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
make: * [overflows] Error 1
You recommendation
GLIB = `pkg-config --cflags --libs glib-2.0`
solves my problem.
PS： my system Ubuntu 13.10. 64bit.
I'm trying to create a shared library with my gcc. It's a gcc for vxworks (thats probably the problem...).
I use the gcc as following:
./gcc -shared -B/path/to/gnutools/bin -o test.so test.c
Result:
/path/to/ld: -r and -shared may not be used together
collect2: ld returned 1 exit status
If I try the same with the linux gcc, there's no problem. So i guess the gcc for VxWorks automatically passes the -r (or -i, which is the same and results in the same) flag to the linker. Is there a way to suppress this?
Greetz
marty
PS: making it static is not really an alternative...
Try compile object file separately with -fPIC and then link:
gcc -Wall -fPIC -c -o test.o test.c
gcc -Wall -shared -o test.so test.o
Another suggestion is to use libtool (at least to figure out the correct flags).
A workaround may be to go directly with ld:
ld -shared -o test.so test.o -lc
I'm trying to compile a program using a third party library, Omnet++ in my case. Apparently "make" does not find a library, but the path it uses is correct as you can see (in the sense that I can see the library under omnet++ source tree)
pv135168:basic Bob$ opp_makemake
Creating Makefile in /Users/Bob/Code/network_sim/basic... Makefile created, running "make depend" to add dependencies... opp_makedep -Y --objdirtree -I. -f Makefile -P\$O/ -- ./*.cc
pv135168:basic Bob$ make
g++ -c -g -Wall
-fno-stack-protector -m32 -DHAVE_PCAP -DXMLPARSER=libxml
-DWITH_PARSIM -DWITH_NETBUILDER -I.
-I/Users/Bob/Code/omnetpp-4.1/include -o out/gcc-debug//txc1.o txc1.cc g++ -m32 -Wl,-rpath,/Users/Bob/Code/omnetpp-4.1/lib -Wl,-rpath,. -o out/gcc-debug//basic out/gcc-debug//txc1.o -Wl,-all_load
-L"/Users/Bob/Code/omnetpp-4.1/lib/gcc"
-L"/Users/Bob/Code/omnetpp-4.1/lib" -u _tkenv_lib -lopptkenvd
-loppenvird -lopplayoutd -u _cmdenv_lib -loppcmdenvd -loppenvird
-loppsimd -lstdc++
ld: library not found for -lopptkenvd
collect2: ld returned 1 exit status make: *** [out/gcc-debug//basic]
Error 1 pv135168:basic Bob$
It's looking in the following directories for a file called libopptkenvd.dylib or libopptkenvd.a:
/Users/Bob/Code/omnetpp-4.1/lib/gcc
/Users/Bob/Code/omnetpp-4.1/lib
Is that file in one of those directories (or in the standard directories like /usr/lib)? I don't see an indication of that in your output.