I'm trying to set up a Laravel Homestead on a USB drive given the unfortunate amount of space on my laptop's disk. My current OS is Ubuntu 16.04. I've followed this tutorial:
https://www.jeffgeerling.com/blogs/jeff-geerling/running-vagrant-virtualbox
My USB Drive has three directories:
"vagrant_home", where I copied and renamed ".vagrant.d", as instructed by the tutorial. I successfully have a laravel/homestead box in here.
"VirtualBox VMs", where I set VirtualBox to look for VMs.
"Homestead", following the directions in the official Laravel tutorial, I cloned this git repository and changed one of the Homestead.yaml settings to reflect the USB Drive:
folders:
- map: /media/nick/Homestead/Code
to: /home/vagrant/Code
type: "nfs"
When I run "vagrant up", an unwanted .vagrant.d folder is created in my home directory, not on the USB drive. Additionally, I get this error:
There was an error while executing 'VBoxManage', a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.
Command: ["hostonlyif", "create"]
Stderr: 0%...
Progress state: NS_ERROR_FAILURE
VBoxManage: error: Failed to create the host-only adapter
VBoxManage: error: VBoxNetAdpCtl: Error while adding new interface: VBoxNetAdpCtl: ioctl failed for /dev/vboxnetctl: Inappropriate ioctl for devic
VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component HostNetworkInterfaceWrap, interface IHostNetworkInterface
VBoxManage: error: Context: "RTEXITCODE handleCreate(HandlerArg*)" at line 94 of file VBoxManageHostonly.cpp
`
I have also installed Vagrant and VirtualBox, as described by the official Homestead tutorial: https://laravel.com/docs/5.1/homestead
Thanks for reading. Your help is much appreciated.
Try restarting virtual box or vagrant reload command.
Make sure its not a permission issue
Related
System: Windows 10 Home 64bit, Vagrant 2.2.13, VirtualBox 6.1.16
Few seconds after running "vagrant up" command i'm getting this error:
There was an error while executing VBoxManage, a CLI used by Vagrant for controlling VirtualBox. The command and stderr is shown below.
Progress state: E_INVALIDARG.
VBoxManage.exe: error: Appliance import failed.
VBoxManage.exe: error: Code E_INVALIDARG (0x80070057) - One or more arguments are invalid (extended info not available).
VBoxManage.exe: error: Context: "enum RTEXITCODE __cdecl handleImportAppliance(struct HandlerArg )" at line 1118 of file VBoxManageAppliance.cpp
I have already:
Checked if there is no other virtual boxes running;
Tried to run different commands: vagrant provision, vagrant reload --provision, vagrant up --provision, vagrant up, vagrant reload.
Deleted ".vagrant" folder in the "Homestead" folder;
Still, not running.
My Homestead.yaml.
How to fix it and make Homestead run normally?
Thank you for your time and help.
OK, in my case situation was solved by moving VirtualBox default machine folder to another drive, because there was not enough space on C drive, that was originally configured in VirtualBox.
In other words this error "Code E_INVALIDARG (0x80070057)" means you have not enough space for your virtual machine to start.
Change the drive and you should be good to go.
See attached image of the VirtualBox setting window:
I just updated MacOS to New version (Big Sur). When I tried vagrant up to start the vagrant, it shows error as the following below:
There was an error while executing `VBoxManage`, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.
Command: ["hostonlyif", "create"]
Stderr: 0%...
Progress state: NS_ERROR_FAILURE
VBoxManage: error: Failed to create the host-only adapter
VBoxManage: error: VBoxNetAdpCtl: Error while adding new interface: failed to open /dev/vboxnetctl: No such file or directory
VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component HostNetworkInterfaceWrap, interface IHostNetworkInterface
VBoxManage: error: Context: "RTEXITCODE handleCreate(HandlerArg *)" at line 94 of file VBoxManageHostonly.cpp
Anyone know how to solve this issue? I've tried install vagrant again already.
I have solved this problem by below steps:
Update your virtualbox
Update your vagrant
Go to System Preference then privacy& security and Allow the permission in general tap.
I had this issue too & upgrading my virtualbox to 6.1 solve the issue. Check the thread here.
But when I tried using virtual v6.0 the error still persist.
I had been updated the VirtualBox even reinstall but the issue did not resolve . After I uninstall and reinstall the Virtualbox, allow permission, and restart my pc then the issue fix. I had followed the bellow steps:
Uninstall VirtualBox via their official uninstaller script
Do a clean install of VirtualBox using VirtualBox.pkg
Adjust the privacy settings of Big Sur: System Preferences > Security and Privacy > click the unlock button
Restart pc
I am having some issues setting up my dev environment.
My setup:
Windows 10 Host
Running Ubuntu 14 in a VirtualBox instance
Install Homestead
vagrant up
This error
There was an error while executing VboxManage, a CLI used by Vagrant for controlling Virtualbox. The command and stderr is shown below.
Command: [hostonlyif", "create"]
Stderr: 0%...
Progress State: NS_ERROR_FAILURE VBoxManage: error: Failed to create the host-only adapter VboxManage: error: VboxNetAdpCtl: Error while adding new interface: VBoxNetAdpCtl: ioctl failed for > devboxnetctl: Inappropriate ioctl for devic
VboxManage error: Details: code NS_ERROR_FAILURE (0x80004005), component HostNetworkInterfaceWrap, interface IHostNetworkInterface
VBoxManage: error: Context: "RTEXCODE handleCreate(HandlerArg*)" at line 71 of file VBoxManageHostonly.cpp
I would greatly appreciate any insight into this issue, as my google-fu has failed me on this one (and some errors with dependencies concerning the right version of virtual box -- 5.1 doesn't work here, had to uninstall and downgrade to 5-- have depleted my energies).
Is it possible that this is an "inception" kind of issue regarding the fact that I'm setting up a virtual machine inside a virtual machine?
The (first) VBox Storage settings: 50GB partitioned, 14 current size
Granted the machine 1 cpu
The network settings is here
Thankyou in advance
I have had a similar problem updating from Windows 7 to Windows 10.
You can see the solution in my blog (in Spanish) and automatically translated with Google translator. It is not spam ;)
Try to downgrade linux kernel version. Its most probably about your hardware and linux kernel mismatch problem. Also Its not normal situation why are you using virtual machine inside virtual machine?.
I've been having some trouble with Vagrant and Virtualbox lately and I can't pinpoint what is going on. I am trying to use the Vagrant setup in this repository (https://github.com/sapienza/vagrant-php-box) but everytime I issue a vagrant up command I get the same traceback error about a corrupted image:
There was an error while executing `VBoxManage`, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.
Command: ["import", "/home/dan/.vagrant.d/boxes/ubuntu-VAGRANTSLASH-trusty64/20160602.0.0/virtualbox/box.ovf", "--vsys", "0", "--vmname", "ubuntu-cloudimg-trusty-vagrant-amd64_1466024621846_36463", "--vsys", "0", "--unit", "6", "--disk", "/home/dan/VirtualBox VMs/ubuntu-cloudimg-trusty-vagrant-amd64_1466024621846_36463/box-disk1.vmdk"]
Stderr: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Interpreting /home/dan/.vagrant.d/boxes/ubuntu-VAGRANTSLASH-trusty64/20160602.0.0/virtualbox/box.ovf...
OK.
0%...
Progress state: VBOX_E_FILE_ERROR
VBoxManage: error: Appliance import failed
VBoxManage: error: Could not create the imported medium '/home/dan/VirtualBox VMs/ubuntu-cloudimg-trusty-vagrant-amd64_1466024621846_36463/box-disk1.vmdk'.
VBoxManage: error: VMDK: Compressed image is corrupted '/home/dan/.vagrant.d/boxes/ubuntu-VAGRANTSLASH-trusty64/20160602.0.0/virtualbox/box-disk1.vmdk' (VERR_ZIP_CORRUPTED)
VBoxManage: error: Details: code VBOX_E_FILE_ERROR (0x80bb0004), component ApplianceWrap, interface IAppliance
VBoxManage: error: Context: "RTEXITCODE handleImportAppliance(HandlerArg*)" at line 877 of file VBoxManageAppliance.cpp
I attempted to remove the corrupted box with vagrant box remove ubuntu/trusty64 and reissue the vagrant up command and the box appears to be successfully downloaded but it fails every time when importing the base box.
I'm currently using Vagrant 1.8.4 and Virtualbox 5.0.20 on Ubuntu 14.04. Any help would be greatly appreciated.
To assist in the troubleshooting, how about:
Create a new directory
Inside the new directory, execute a vagrant init ubuntu/trusty64
vagrant up
Does the machine come up ? if so, then environment should be okay.
Next I would create a new directory again, and copy only the relevant files from that github repo excluding the hidden directory .vagrant
Ideally, a .gitignore should be in present in that repo excluding that a .vagrant directory.
Good Luck!
My vagrant version is 1.2.2 and soon after upgrading to OSx Mavericks, there is an error with my vagrant box. I have tried destroying it and restarting it, but doesn't seem to come back up.
There was an error while executing VBoxManage, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.
Command: ["hostonlyif", "create"]
Stderr: 0%...
Progress state: NS_ERROR_FAILURE
VBoxManage: error: Failed to create the host-only adapter
VBoxManage: error: VBoxNetAdpCtl: Error while adding new interface: failed to open /dev/vboxnetctl: No such file or directory
VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component HostNetworkInterface, interface IHostNetworkInterface
VBoxManage: error: Context: "int handleCreate(HandlerArg*, int, int*)" at line 68 of file VBoxManageHostonly.cpp
You need VirtualBox 4.3.x on Mavericks (downloads). And support for it was added in Vagrant 1.3.5 (downloads). So try upgrading both.