I can not initialize the metabase setup, as I am getting error when connecting metabase to h2 db.
I did so far as below
1.Downloaded metabase.jar from here
2.From cmd prompt i executed java -jar metabase.jar
I am getting Below error
04-25 12:03:07 INFO metabase.core :: Setting up and migrating Metabase DB. Please sit tight, this may take a minute...
04-25 12:03:07 INFO metabase.db :: Verifying h2 Database Connection ...
04-25 12:03:12 ERROR metabase.driver :: Failed to connect to database: Timed out after 5000 milliseconds.
java.lang.AssertionError: Assert failed: Unable to connect to Metabase h2 DB.
(binding [*allow-potentailly-unsafe-connections* true] (require (quote metabase.driver)) ((resolve (quote metabase.drive
r/can-connect-with-details?)) engine details))
at metabase.db$verify_db_connection.invokeStatic(db.clj:320)
at metabase.db$verify_db_connection.invoke(db.clj:313)
at metabase.db$verify_db_connection.invokeStatic(db.clj:316)
at metabase.db$verify_db_connection.invoke(db.clj:313)
at metabase.db$setup_db_BANG_.invokeStatic(db.clj:368)
at metabase.db$setup_db_BANG_.doInvoke(db.clj:362)
at clojure.lang.RestFn.invoke(RestFn.java:421)
at metabase.core$init_BANG_.invokeStatic(core.clj:102)
at metabase.core$init_BANG_.invoke(core.clj:81)
at metabase.core$start_normally.invokeStatic(core.clj:186)
at metabase.core$start_normally.invoke(core.clj:180)
at metabase.core$_main.invokeStatic(core.clj:278)
at metabase.core$_main.doInvoke(core.clj:273)
at clojure.lang.RestFn.invoke(RestFn.java:397)
at clojure.lang.AFn.applyToHelper(AFn.java:152)
at clojure.lang.RestFn.applyTo(RestFn.java:132)
at metabase.core.main(Unknown Source)
04-25 12:03:12 ERROR metabase.core :: Metabase Initialization FAILED: Assert failed: Unable to connect to Metabase h2 D
B.
(binding [*allow-potentailly-unsafe-connections* true] (require (quote metabase.driver)) ((resolve (quote metabase.drive
r/can-connect-with-details?)) engine details))
04-25 12:03:12 INFO metabase.core :: Metabase Shutting Down ...
04-25 12:03:12 INFO metabase.core :: Metabase Shutdown COMPLETE
Initially I didn't get an error. I did everything in metabase. After 2 days, when I tried the same, I am getting this error. Even after deleting everything and tried from start again and also with admin permisions. Nothing worked same error.
Try Opening command prompt with admin credentials and run the below command
java -jar metabase.jar
this is because of your antivirus protects your system to get data from outside. please check firewalls are on. once you turn off. it will work. I have spent almost 2 days to solve this problem
Try with root login: "sudo su - ". I faced the same issue and realised that I wasn't logged in as root user.
Related
I'm having an error when running yarn on a job. HDFS and Yarn both start up fine, jps shows everything normal, pseudo-distributed mode on HDFS works perfectly, and I have triple and quadruple checked my configuration files. Whenever I attempt to run Yarn, however, this happens:
INFO retry.RetryInvocationHandler: java.net.ConnectException: Call From serverA/IPaddress to serverB:30170 failed on connection exception: java.net.ConnectException: Connection refused; For more details see: http://wiki.apache.org/hadoop/ConnectionRefused, while invoking ApplicationClientProtocolPBClientImpl.getNewApplication over null after 6 failover attempts. Trying to failover after sleeping for 44428ms.
Yarn then attempts to connect over and over again until I forcefully quit the process. Any ideas why this is happening?
Can you see yarn web ui?
How did you start hdfs and yarn?
You can try ./sbin/start-all.sh
In macOS, I was trying to use Payara Server with Netbeans 12 and I got:
Launching Payara Server on Felix platform
INFO: Create bundle provisioner class = class com.sun.enterprise.glassfish.bootstrap.osgi.BundleProvisioner.
Registered com.sun.enterprise.glassfish.bootstrap.osgi.EmbeddedOSGiGlassFishRuntime#462c1ddf in service registry.
#!## LogManagerService.postConstruct : rootFolder=/Users/joseluisbz/Documentos/Java/payara5-2020-4/glassfish
#!## LogManagerService.postConstruct : templateDir=/Users/joseluisbz/Documentos/Java/payara5-2020-4/glassfish/lib/templates
#!## LogManagerService.postConstruct : src=/Users/joseluisbz/Documentos/Java/payara5-2020-4/glassfish/lib/templates/logging.properties
#!## LogManagerService.postConstruct : dest=/Users/joseluisbz/Documentos/Java/payara5-2020-4/glassfish/domains/domain1/config/logging.properties
Running Payara Version: Payara Server 5.2020.4 #badassfish (build 817)|#]
Server log file is using Formatter class: com.sun.enterprise.server.logging.ODLLogFormatter|#]
HV000001: Hibernate Validator 6.1.2.Final|#]
[192.168.0.11]:4900 [development] [3.12.6] Connection[id=1, /192.168.0.11:49587->/192.168.0.11:5900, qualifier=null, endpoint=[192.168.0.11]:5900, alive=false, type=NONE] closed. Reason: Exception in Connection[id=1, /192.168.0.11:49587->/192.168.0.11:5900, qualifier=null, endpoint=[192.168.0.11]:5900, alive=true, type=NONE], thread=hz._hzInstance_1_development.IO.thread-in-0
java.lang.IllegalStateException: Unknown protocol: RFB
at com.hazelcast.nio.tcp.UnifiedProtocolDecoder.onRead(UnifiedProtocolDecoder.java:107)
at com.hazelcast.internal.networking.nio.NioInboundPipeline.process(NioInboundPipeline.java:135)
at com.hazelcast.internal.networking.nio.NioThread.processSelectionKey(NioThread.java:369)
at com.hazelcast.internal.networking.nio.NioThread.processSelectionKeys(NioThread.java:354)
at com.hazelcast.internal.networking.nio.NioThread.selectLoop(NioThread.java:280)
at com.hazelcast.internal.networking.nio.NioThread.run(NioThread.java:235)
|#]
Then by console, here my position (I renamed payara5 directory to payara5-2020-4).
% pwd
.../payara5-2020-4/glassfish/bin
%
In order to fix the first problem:
% ./asadmin set-hazelcast-configuration --enabled=false
Remote server does not listen for requests on [localhost:4848]. Is the server up?
No such local command: set-hazelcast-configuration. Unable to access the server to execute the command remotely. Verify the server is available.
Command set-hazelcast-configuration failed.
%
After I was trying to up...
% ./asadmin start-domain domain1
Waiting for domain1 to start ..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
No response from the Domain Administration Server (domain1) after 600 seconds.
The command is either taking too long to complete or the server has failed.
Please see the server log files for command status.
Please start with the --verbose option in order to see early messages.
Command start-domain failed.
%
Then, I was trying to verbose option (like recommendation)...
% ./asadmin start-domain domain1 --verbose
Command start-domain only accepts one operand
...
% ./asadmin --verbose start-domain domain1
Invalid option: --verbose
...
% ./asadmin -v start-domain domain1
Invalid option: -v
...
% ./asadmin start-domain domain1 -v
Command start-domain only accepts one operand
...
The common message
Usage: asadmin [asadmin-utility-options] start-domain
[-v|--verbose[=<verbose(default:false)>]]
[--upgrade[=<upgrade(default:false)>]]
[-w|--watchdog[=<watchdog(default:false)>]]
[-d|--debug[=<debug(default:false)>]]
[-n|--dry-run[=<dry-run(default:false)>]]
[--drop-interrupted-commands[=<drop-interrupted-commands(default:false)>]]
[--prebootcommandfile <prebootcommandfile>]
[--postbootcommandfile <postbootcommandfile>] [--domaindir <domaindir>]
[-?|--help[=<help(default:false)>]] [domain_name]
Sadly, I believe strongly that Payara is inmature product.
But, How Can I solve all these errors/mistakes?
EDIT:
I was testing on Windows 10 PRO with Netbeans 12
Launching Payara Server on Felix platform
INFO: Create bundle provisioner class = class com.sun.enterprise.glassfish.bootstrap.osgi.BundleProvisioner.
Registered com.sun.enterprise.glassfish.bootstrap.osgi.EmbeddedOSGiGlassFishRuntime#586f5c68 in service registry.
Exception in thread "main" java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at com.sun.enterprise.glassfish.bootstrap.GlassFishMain.main(GlassFishMain.java:109)
at com.sun.enterprise.glassfish.bootstrap.ASMain.main(ASMain.java:54)
Caused by: A MultiException has 2 exceptions. They are:
1. com.sun.enterprise.module.ResolveError: Failed to start OSGiModuleImpl:: Bundle = [fish.payara.server.internal.batch.glassfish-batch-connector [102]], State = [NEW]
2. java.lang.IllegalStateException: Could not load descriptor SystemDescriptor(
implementation=org.glassfish.batch.spi.impl.BatchRuntimeConfigurationInjector
name=batch-runtime-configuration
contracts={org.glassfish.batch.spi.impl.BatchRuntimeConfigurationInjector,org.jvnet.hk2.config.ConfigInjector}
scope=javax.inject.Singleton
qualifiers={org.jvnet.hk2.config.InjectionTarget}
descriptorType=CLASS
descriptorVisibility=NORMAL
metadata=#table-suffix={optional,default\:,datatype\:java.lang.String,leaf},#data-source-lookup-name={optional,datatype\:java.lang.String,leaf},#table-prefix={optional,default\:,datatype\:java.lang.String,leaf},#schema-name={optional,default\:APP,datatype\:java.lang.String,leaf},#executor-service-lookup-name={optional,default\:concurrent/__defaultManagedExecutorService,datatype\:java.lang.String,leaf},target={org.glassfish.batch.spi.impl.BatchRuntimeConfiguration},Bundle-SymbolicName={fish.payara.server.internal.batch.glassfish-batch-connector},Bundle-Version={5.2020.4}
rank=0
loader=OsgiPopulatorPostProcessor.HK2Loader(OSGiModuleImpl:: Bundle = [fish.payara.server.internal.batch.glassfish-batch-connector [102]], State = [NEW],1228963996)
proxiable=null
proxyForSameScope=null
analysisName=null
id=170
locatorId=0
identityHashCode=373437697
reified=false)
at org.jvnet.hk2.internal.ServiceLocatorImpl.loadClass(ServiceLocatorImpl.java:2247)
at org.jvnet.hk2.internal.ServiceLocatorImpl.reifyDescriptor(ServiceLocatorImpl.java:438)
at org.jvnet.hk2.internal.ServiceLocatorImpl.reifyDescriptor(ServiceLocatorImpl.java:457)
at org.jvnet.hk2.config.DomDocument$InjectionTargetFilter.matches(DomDocument.java:184)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getDescriptors(ServiceLocatorImpl.java:347)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getDescriptors(ServiceLocatorImpl.java:389)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getBestDescriptor(ServiceLocatorImpl.java:397)
at org.jvnet.hk2.config.DomDocument.buildModel(DomDocument.java:135)
at org.jvnet.hk2.config.ConfigModel.parseValue(ConfigModel.java:959)
at org.jvnet.hk2.config.ConfigModel.<init>(ConfigModel.java:875)
at org.jvnet.hk2.config.DomDocument.buildModel(DomDocument.java:114)
at org.jvnet.hk2.config.DomDocument.getModelByElementName(DomDocument.java:162)
at org.jvnet.hk2.config.ConfigParser.handleElement(ConfigParser.java:165)
at org.jvnet.hk2.config.ConfigParser.parse(ConfigParser.java:101)
at org.jvnet.hk2.config.ConfigParser.parse(ConfigParser.java:95)
at org.glassfish.config.support.DomainXml.parseDomainXml(DomainXml.java:271)
at org.glassfish.config.support.DomainXml.run(DomainXml.java:121)
at org.jvnet.hk2.config.ConfigurationPopulator.populateConfig(ConfigurationPopulator.java:58)
at org.glassfish.hk2.bootstrap.HK2Populator.populateConfig(HK2Populator.java:83)
at com.sun.enterprise.module.common_impl.AbstractModulesRegistryImpl.populateConfig(AbstractModulesRegistryImpl.java:190)
at com.sun.enterprise.module.bootstrap.Main.createServiceLocator(Main.java:249)
at org.jvnet.hk2.osgiadapter.HK2Main.createServiceLocator(HK2Main.java:95)
at com.sun.enterprise.glassfish.bootstrap.osgi.EmbeddedOSGiGlassFishRuntime.newGlassFish(EmbeddedOSGiGlassFishRuntime.java:95)
at com.sun.enterprise.glassfish.bootstrap.GlassFishRuntimeDecorator.newGlassFish(GlassFishRuntimeDecorator.java:68)
at com.sun.enterprise.glassfish.bootstrap.osgi.OSGiGlassFishRuntime.newGlassFish(OSGiGlassFishRuntime.java:91)
at com.sun.enterprise.glassfish.bootstrap.GlassFishMain$Launcher.launch(GlassFishMain.java:125)
... 6 more
Caused by: com.sun.enterprise.module.ResolveError: Failed to start OSGiModuleImpl:: Bundle = [fish.payara.server.internal.batch.glassfish-batch-connector [102]], State = [NEW]
at org.jvnet.hk2.osgiadapter.OSGiModuleImpl.start(OSGiModuleImpl.java:193)
at org.jvnet.hk2.osgiadapter.OsgiPopulatorPostProcessor$1.loadClass(OsgiPopulatorPostProcessor.java:54)
at org.jvnet.hk2.internal.ServiceLocatorImpl.loadClass(ServiceLocatorImpl.java:2239)
... 31 more
Caused by: org.osgi.framework.BundleException: Unable to resolve fish.payara.server.internal.batch.glassfish-batch-connector [102](R 102.0): missing requirement [fish.payara.server.internal.batch.glassfish-batch-connector [102](R 102.0)] osgi.wiring.package; (osgi.wiring.package=com.ibm.jbatch.spi) [caused by: Unable to resolve fish.payara.server.internal.batch.payara-jbatch [311](R 311.0): missing requirement [fish.payara.server.internal.batch.payara-jbatch [311](R 311.0)] osgi.wiring.package; (osgi.wiring.package=org.glassfish.weld) [caused by: Unable to resolve fish.payara.server.internal.web.weld-integration [372](R 372.0): missing requirement [fish.payara.server.internal.web.weld-integration [372](R 372.0)] osgi.wiring.package; (&(osgi.wiring.package=org.glassfish.web.deployment.descriptor)(version>=5.2020.0)(!(version>=6.0.0))) [caused by: Unable to resolve fish.payara.server.internal.web.glue [360](R 360.0): missing requirement [fish.payara.server.internal.web.glue [360](R 360.0)] osgi.wiring.package; (&(osgi.wiring.package=org.apache.catalina)(version>=5.2020.0)(!(version>=6.0.0))) [caused by: Unable to resolve fish.payara.server.internal.web.core [358](R 358.0): missing requirement [fish.payara.server.internal.web.core [358](R 358.0)] osgi.wiring.package; (&(osgi.wiring.package=org.glassfish.web.loader)(version>=5.2020.0)(!(version>=6.0.0)))]]]] Unresolved requirements: [[fish.payara.server.internal.batch.glassfish-batch-connector [102](R 102.0)] osgi.wiring.package; (osgi.wiring.package=com.ibm.jbatch.spi)]
at org.apache.felix.framework.Felix.resolveBundleRevision(Felix.java:4368)
at org.apache.felix.framework.Felix.startBundle(Felix.java:2281)
at org.apache.felix.framework.BundleImpl.start(BundleImpl.java:998)
at org.jvnet.hk2.osgiadapter.OSGiModuleImpl.startBundle(OSGiModuleImpl.java:227)
at org.jvnet.hk2.osgiadapter.OSGiModuleImpl.start(OSGiModuleImpl.java:185)
... 33 more
Completed shutdown of GlassFish runtime
We are in non-embedded mode, so fish.payara.server.internal.core.glassfish [113] has nothing to do.
The error "Unknown protocol: RFB" is coming from the Hazelcast component, which is trying to discover other cluster instances that could be running on port 5900. In some operating systems, very often on Mac, this port is occupied by VNC (remote desktop), which responds to Payara Server in an unexpected way.
There's a solution covered for Payara Enterprise users in the Payara Knowledge Base. I have access to it and will copy the relevant parts from it here.
There are various solutions possible:
Stop the process that occupies the port 5900 (e.g. VNC, which uses that port by default). Alternatively, you can change its port. Payara Server should then start OK.
Configure Payara Server to use a different port for Hazelcast. If you run Payara Server according to the above solution, you can then run command: asadmin set-hazelcast-configuration --startport=5901.
Directly edit the domain.xml in the directory glassfish/domains/domain1/config and change the port 5900 to something else. Then run Payara Server as usual.
Or change the Hazelcast port of Payara Server at startup. First, create a text file config.txt with one line set-hazelcast-configuration --startport=5901. Then start Payara Server with asdamin start-domain --postbootcommandfile config.txt. More on this in the documentation: https://docs.payara.fish/community/docs/5.2020.4/documentation/payara-micro/asadmin/pre-and-post-boot-scripts.html
Good afternoon everyone, the problem is this I have a server with SonarQube, that when I try to start the windows service, it gets up but then it stops.
The following error appears in the sonarqube log:
2017.11.14 11:04:52 WARN sea[o.e.transport.netty] [sonar-1510653879773] exception caught on transport layer [[id: 0x346b46fb, /127.0.0.1:59330 => /127.0.0.1:9001]], closing connection
java.io.IOException: An existing connection was forcibly closed by the remote host
at sun.nio.ch.SocketDispatcher.read0(Native Method) ~[na:1.8.0_152]
at sun.nio.ch.SocketDispatcher.read(SocketDispatcher.java:43) ~[na:1.8.0_152]
at sun.nio.ch.IOUtil.readIntoNativeBuffer(IOUtil.java:223) ~[na:1.8.0_152]
at sun.nio.ch.IOUtil.read(IOUtil.java:192) ~[na:1.8.0_152]
at sun.nio.ch.SocketChannelImpl.read(SocketChannelImpl.java:380) ~[na:1.8.0_152]
at org.elasticsearch.common.netty.channel.socket.nio.NioWorker.read(NioWorker.java:64) [elasticsearch-1.1.2.jar:na]
at org.elasticsearch.common.netty.channel.socket.nio.AbstractNioWorker.process(AbstractNioWorker.java:108) [elasticsearch-1.1.2.jar:na]
at org.elasticsearch.common.netty.channel.socket.nio.AbstractNioSelector.run(AbstractNioSelector.java:318) [elasticsearch-1.1.2.jar:na]
at org.elasticsearch.common.netty.channel.socket.nio.AbstractNioWorker.run(AbstractNioWorker.java:89) [elasticsearch-1.1.2.jar:na]
at org.elasticsearch.common.netty.channel.socket.nio.NioWorker.run(NioWorker.java:178) [elasticsearch-1.1.2.jar:na]
at org.elasticsearch.common.netty.util.ThreadRenamingRunnable.run(ThreadRenamingRunnable.java:108) [elasticsearch-1.1.2.jar:na]
at org.elasticsearch.common.netty.util.internal.DeadLockProofWorker$1.run(DeadLockProofWorker.java:42) [elasticsearch-1.1.2.jar:na]
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) [na:1.8.0_152]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) [na:1.8.0_152]
at java.lang.Thread.run(Thread.java:748) [na:1.8.0_152]
2017.11.14 11:04:52 INFO app[o.s.p.m.TerminatorThread] Process[search] is stopping
2017.11.14 11:04:52 INFO sea[o.s.p.StopWatcher] Stopping process
Do you know why this error?
I have set the sonar.properties correctly, including set the value of the sonar.search.port property to 0 as this link suggests: Sonar launch error, but the problem persists.
I hope you can give me a hand...
Regards!!!
UnComment below line in sonar property file and change port 9001 to 0
#sonar.search.port=9001
sonar.search.port=0
I had the same problem and i could fix it like this:
Go to this folder: sonarqube-x.x\conf
Open this file: sonar.properties
Find the word: #sonar.web.port
Change the value from 9000 to another port, like 9002
Save your changes
Start again your sonarqube
Access to the server with port 9000: http://localhost:9000
The reason could be the port number of sonarQube OR the one of elasticSearch instance used by sonarQube (I had a similar problem before), so the step to change both/one of those ports are :
Go to this folder: sonarqube-x.x\conf
Open this file: sonar.properties
For sonarQube port:
Find: #sonar.web.port
Change the value from 9000 to another port, like 9123; and un-comment the line (remove # in the beginning) sonar.web.port=9123
For sonarQube's elasticSearch instace port:
Find: #sonar.search.port
change this line To sonar.search.port=0 (this means that he will search for any available port and bind it)
Save your changes
Start again your sonarqube
Access to the server with the new specified sonarQube-port: http://localhost:9123
I experienced this error when upgrading SonarQube from version 5.6.7 to 6.7.1.
Originally I thought this was due to the port number but upon checking the web.log I noticed that there was an error relating to the LDAP plugin (2.2.0.608).
ERROR web[][o.s.s.p.Platform] Background initialization failed. Stopping SonarQube org.sonar.plugins.ldap.LdapException: The property 'ldap.url' is empty and no realm configured to try auto-discovery.
Updating the sonar.properties file with the correct configuration allowed SonarQube to start.
I just occurred an exactly same question as you did.
I started SonarQube with MariaDB 5.5, but I found some error messages in sonarqube-x.x/logs/web.log:
2021.01.21 14:36:17 INFO web[][o.s.p.ProcessEntryPoint] Starting web
......
2021.01.21 14:36:19 ERROR web[][o.s.s.p.Platform] Web server startup failed: Unsupported mysql version: 5.5. Minimal supported version is 5.6.
So I changed my database to MySQL 5.7 and it started successfully.
Not quite sure you had the same problem, but just check these log files and see what actually happened during starting.
I'm trying to monitor Tomcat8 with JDK8 using JMX.
I have setup my agents and modified the startup.sh.
On my zabbix_java_gateway.log I get the following exception:
WARN com.zabbix.gateway.SocketProcessor - error processing request
com.zabbix.gateway.ZabbixException: java.net.SocketTimeoutException:
connection timed out:
service:jmx:rmi:///jndi/rmi://server1.example.com:10052/jmxrmi
at com.zabbix.gateway.JMXItemChecker.getValues(JMXItemChecker.java:97)
~[zabbix-java-gateway-2.4.7.jar:na]
at com.zabbix.gateway.SocketProcessor.run(SocketProcessor.java:63)
~[zabbix-java-gateway-2.4.7.jar:na]
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
[na:1.8.0_71]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
[na:1.8.0_71]
at java.lang.Thread.run(Thread.java:745) [na:1.8.0_71] Caused by: java.net.SocketTimeoutException: connection timed out:
service:jmx:rmi:///jndi/rmi://server1.example.com:10052/jmxrmi
at com.zabbix.gateway.ZabbixJMXConnectorFactory.connect(ZabbixJMXConnectorFactory.java:123)
~[zabbix-java-gateway-2.4.7.jar:na]
at com.zabbix.gateway.JMXItemChecker.getValues(JMXItemChecker.java:89)
~[zabbix-java-gateway-2.4.7.jar:na]
... 4 common frames omitted
On my startup.sh I added the following to the CATALINA_OPTS
-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=10052 -Dcom.sun.management.jmxremote.authenticate=true -Dcom.sun.management.jmxremote.password.file=/opt/tomcat-latest/conf/jmxremote.password
-Dcom.sun.management.jmxremote.access.file=/opt/tomcat-latest/conf/jmxremote.access
-Dcom.sun.management.jmxremote.ssl=false -Djava.rmi.server.hostname=server1.example.com
My zabbix_agentd.conf contains the following:
PidFile=/tmp/zabbix_agentd.pid LogFile=/var/log/zabbix_agentd.log
LogFileSize=1 DebugLevel=3 Server=monitor.example.com
Hostname=server1.example.com ListenPort=10050 StartAgents=5 Timeout=30
I have already done the following:
successfully connected to the server using jconsole
remove authentication
telnet the server over port 10050 / 10052
The weird part is that the same setup works well for Tomcat6 with JDK7.
EDIT 1
I've updated the JDK version on the zabbix server to be newer than the JDK installed on my JAVA nodes - still same result - it ends with
ZBX_TCP_READ() failed: [4] Interrupted system call
UPDATE
So I figured it out eventually.
I had on my tomcat configuration file -Djava.rmi.server.hostname=server1.example.com
I miss understood that the hostname should be set to the monitoring server and to the monitored server hostname.
Apparently, there's a bug on Tomcat 6 and this directive does not work.
Remove it solved the problem completely.
Thanks,
Liron
I am new to JasperReports Server and have searched for a resolve to this issue. I have found nothing. I inherited this server and the reports are not running as scheduled.
Job: 3rd (ID: 61)
Report unit: /reports/Scheduled/00_Schedule_Primer
Quartz Job: ReportJobs.job_61
Quartz Trigger: ReportJobs.trigger_62_1
Exceptions:
An error occurred while executing the report.
com.jaspersoft.jasperserver.api.JSException: jsexception.error.creating.connection
at com.jaspersoft.jasperserver.api.engine.jasperreports.service.impl.JdbcDataSourceService.createConnection(JdbcDataSourceService.java:62)
at com.jaspersoft.jasperserver.api.engine.jasperreports.service.impl.BaseJdbcDataSource.setReportParameterValues(BaseJdbcDataSource.java:52)
at com.jaspersoft.jasperserver.api.engine.jasperreports.service.impl.JdbcDataSourceService.setReportParameterValues(JdbcDataSourceService.java:67)
at com.jaspersoft.jasperserver.api.engine.jasperreports.service.impl.EngineServiceImpl.fillReport(EngineServiceImpl.java:743)
at com.jaspersoft.jasperserver.api.engine.jasperreports.service.impl.EngineServiceImpl.fillReport(EngineServiceImpl.java:367)
at com.jaspersoft.jasperserver.api.engine.jasperreports.service.impl.EngineServiceImpl.executeReport(EngineServiceImpl.java:876)
at com.jaspersoft.jasperserver.api.engine.jasperreports.domain.impl.ReportUnitRequest.execute(ReportUnitRequest.java:60)
at com.jaspersoft.jasperserver.api.engine.jasperreports.service.impl.EngineServiceImpl.execute(EngineServiceImpl.java:301)
at com.jaspersoft.jasperserver.api.engine.scheduling.quartz.ReportExecutionJob.executeReport(ReportExecutionJob.java:444)
at com.jaspersoft.jasperserver.api.engine.scheduling.quartz.ReportExecutionJob.executeAndSendReport(ReportExecutionJob.java:372)
at com.jaspersoft.jasperserver.api.engine.scheduling.quartz.ReportExecutionJob.execute(ReportExecutionJob.java:188)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by: java.sql.SQLException: Middleware connect fail:No RPC Connection active.
at com.ibm.u2.jdbc.UniJDBCMsgFactory.createException(UniJDBCMsgFactory.java:113)
at com.ibm.u2.jdbc.UniJDBCExceptionSupport.addAndThrowException(UniJDBCExceptionSupport.java:62)
at com.ibm.u2.jdbc.UniJDBCProtocolU2Impl.connect(UniJDBCProtocolU2Impl.java:746)
at com.ibm.u2.jdbc.UniJDBCProtocolU2Impl.executeOpenDatabase(UniJDBCProtocolU2Impl.java:243)
at com.ibm.u2.jdbc.UniJDBCConnectionImpl.<init>(UniJDBCConnectionImpl.java:116)
at com.ibm.u2.jdbc.UniJDBCDriver.connect(UniJDBCDriver.java:111)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:48)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:771)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:95)
at com.jaspersoft.jasperserver.api.engine.jasperreports.service.impl.JdbcDataSourceService.createConnection(JdbcDataSourceService.java:58)
... 12 more
I don't even have a clue where to start troubleshooting this. ANY help would be awesome!
It seems your connection url, username and password values are not proper.If these three things are proper then the connection will be created.Check in your Jasper server configuration.