I have my file
ppp.txt
mmm;2;nsfnjd;pet;
sadjjasjnsd;6;gdhjsd;pet;
gsduhdssdj;3;gsdhjhjsd;dog;
I need to write
nsfnjd
gsdhjhjsd
I use this code but only print the last line "gsdhjhjsd"
I dont know what is doing wrong
File.open("ppp.txt", "r") do |fi|
fi.readlines.each do |line|
parts = line.chomp.split(';')
if parts[1].to_i < 4
puts parts[2]
File.open("testxx.txt", "w+") do |f|
f. puts parts[2]
end
end
end
end
Please help me
Open the file using append mode, 'a+' instead of write mode 'w+', which overwrites the file, as the open command is called inside a loop.
Or open the write file prior to looping the lines of the read file.
open the file descriptor outside the loop
fo = File.open("testxx.txt","w+")
File.open("ppp.txt", "r") do |fi|
fi.readlines.each do |line|
parts = line.chomp.split(';')
fo.puts parts[2] if parts[1].to_i < 4
end
end
fo.close()
NOTE: Need to explicitly close fo, but file open with block; ruby close the file automatically (fi case).
Related
I am trying to log some state to a file using standard file i/o in ruby. The file will just have one line with a number in it. I want to read in the line and then on each iteration of a loop I want to update this number.
I know I can read in the file with
file = File.open('out.log', 'a+')
num = file.readline
The problem is, I don't know how to then overwrite the first line in a loop without just re-opening the file every iteration i.e.
file = File.open('out.log', 'w')
which will create an empty file
No need to open it each time:
file = File.open('out.log', File::RDWR)
10.times do |i|
file.seek(0) # rewind to the beginning of the file (line in your case)
file.write("iteration #{i}") # write what you want
# the following is just in order to show what was written
file.seek(0)
puts file.readline
end
file.close
You can use IO::open with block to close the file, when block exits automatically.
File.open("#{__dir__}/test.txt", File::RDWR) do |file|
10.times do |i|
file.rewind
file.puts("iteration #{i}")
end
end
puts File.read("#{__dir__}/test.txt")
# >> iteration 9
I want to add newline character below.
But the result is wrong.
Teach me what is wrong.
test.txt(before)
------------------
2014-09
2014-10
2014-11
------------------
test.txt(after)
------------------
2014-09
2014-10
2014-11
------------------
I make a ruby script below, but the result is wrong.
f = File.open("test.txt","r+")
f.each{|line|
if line.include?("2014-10")
f.puts nil
end
}
f.close
the result
------------------
2014-09
2014-10
014-11
------------------
To solve your problem, the easiest way is to create a new file to output your new text into. To do you'll need to open the input file and the output file and iterate each line of the file check the condition and put desired line into the output file.
Example
require 'fileutils'
File.open("text-output.txt", "w") do |output|
File.foreach("text.txt") do |line|
if line.include?("2014-10")
output.puts line + "\n"
else
output.puts line
end
end
end
FileUtils.mv("text-output.txt", "text.txt")
Easy way
File.write(f = "text.txt", File.read(f).gsub(/2014-10/,"2014-10\n"))
Reading and writing a file at the same time can get messy, same thing with other data structures like arrays. You should build a new file as you go along.
Some notes:
you should use the block form of File.open because it will stop you from forgetting to call f.close
puts nil is the same as puts without arguments
single quotes are preferred over double quotes when you don’t need string interpolation
you should use do ... end instead of { ... } for multi-line blocks
File.open(...).each can be replaced with File.foreach
the intermediate result can be stored in a StringIO object which will respond to puts etc.
Example:
require 'stringio'
file = 'test.txt'
output = StringIO.new
File.foreach(file) do |line|
if line.include? '2014-10'
output.puts
else
output << line
end
end
output.rewind
File.open(file, 'w') do |f|
f.write output.read
end
I am trying to recursively replace a whole line from index.html files into a directory with sub-directories.
The code above puts the right lines I'm searching with the var "pattern", but when I run it, it removes everything form my index.html files.
pattern = "Keyword"
replacement = "<td width=\"30\"><img src=\"styles/img/trans.gif\" width=\"30\"></td>"
Dir.glob('/Users/root/Desktop/directory/test/**/index.html') do |item|
next unless File.file?(item)
File.open(item, "w+:ASCII-8BIT") do |f|
f.each_line do |line|
if line.match(pattern)
my_line = line
line.sub(my_line, replacement)
end
end
end
end
What am I doing wrong ?
You need to read the file first, build the expected output, and then write it:
Dir.glob('/Users/root/Desktop/directory/test/**/index.html') do |item|
next unless File.file?(item)
output = IO.readlines(item).map do |line|
if line.match(pattern)
replacement
else
line
end
end
File.open(item, "w+:ASCII-8BIT") do |f|
f.write output.join
end
end
end
You use File.open with open mode w+ which, according to Ruby documentation, is:
"w+" Read-write, truncates existing file to zero length or creates a new file for reading and writing.
To read the file and put some lines use r:
File.open(item, "r:ASCII-8BIT")
i read multipe file and i try to get data in yaml file, but i dont know why i get nothing in my yaml file .
Do you have an idea where i can make a mistake ?
a = array.size
i = 0
array.each do |f|
while i < a
puts array[i]
output = File.new('/home/zyriuse/documents/Ruby-On-Rails/script/Api_BK/licence.yml', 'w')
File.readlines(f).each do |line|
output.puts line
output.puts line.to_yaml
#output.puts YAML::dump(line)
end
i += 1
end
end
There's two problems...
You are initializing i to zero too early... when you process the
first file 'f' you process JUST that first file as many times as you
have files in the array, but for all following files i is now always >= a so you're not doing anything with them.
You are doing File.new in every iteration of 'f' so you are wiping out your last iteration.
This might work better...
output = File.new('licence.yml', 'w')
array.each do |f|
puts f
File.readlines(f).each do |line|
output.puts line
output.puts line.to_yaml
end
end
Hi just getting into Ruby, and I am trying to learn some basic file reading commands, and I haven't found any solid sources yet.
I am trying to go through certain lines from that file, til the end of the file.
So in the file where it says FILE_SOURCES I want to read all the sources til end of file, and place them in a file.
I found printing the whole file, and replacing words in the file, but I just want to read certain parts in the file.
Usually you follow a pattern like this if you're trying to extract a section from a file that's delimited somehow:
open(filename) do |f|
state = nil
while (line = f.gets)
case (state)
when nil
# Look for the line beginning with "FILE_SOURCES"
if (line.match(/^FILE_SOURCES/))
state = :sources
end
when :sources
# Stop printing if you hit something starting with "END"
if (line.match(/^END/))
state = nil
else
print line
end
end
end
end
You can change from one state to another depending on what part of the file you're in.
I would do it like this (assuming you can read the entire file into memory):
source_lines = IO.readlines('source_file.txt')
start_line = source_lines.index{ |line| line =~ /SOURCE_LINE/ } + 1
File.open( 'other_file.txt', 'w' ) do |f|
f << source_lines[ start_line..-1 ].join( "\n" )
end
Relevant methods:
IO.readlines to read the lines into an array
Array#index to find the index of the first line matching a regular expression
File.open to create a new file on disk (and automatically close it when done)
Array#[] to get the subset of lines from the index to the end
If you can't read the entire file into memory, then I'd do a simpler variation on #tadman's state-based one:
started = false
File.open( 'other_file.txt', 'w' ) do |output|
IO.foreach( 'source_file.txt' ) do |line|
if started then
output << line
elsif line =~ /FILE_SOURCES/
started = true
end
end
end
Welcome to Ruby!
File.open("file_to_read.txt", "r") {|f|
line = f.gets
until line.include?("FILE_SOURCES")
line = f.gets
end
File.open("file_to_write.txt", "w") {|new_file|
f.each_line {|line|
new_file.puts(line)
}
new_file.close
}
f.close
}
IO functions have no idea what "lines" in a file are. There's no straightforward way to skip to a certain line in a file, you'll have to read it all and ignore the lines you don't need.