I'm a the end with 16 hours of configure, installing, deleting, modifying and hit my keyboard many times....
I want to use restbed for plattform independent C++ programming, but I can't get build this stuff. I have Cygwin (download at 2017/04/24) installed (think for git or whatever creepy things), Code::Blocks with MinGW (16.01) and at least a seperate MinGW (also downloaded 2017/04/24) installation. Also I've Visual Studio 2012 Pro, 2015 and 2017 (long story) on a Windows 7 x64 Pro.
This is what I try and the results:
cloning recursivly with git in empty directory and following the instructions.
cmake -DBUILD_TESTS=YES -DBUILD_EXAMPLES=YES -DBUILD_SSL=NO -DBUILD_SHARED=YES ..
Uhh.. success. I seems it using the gcc/g++ from Cygwin.
-- The C compiler identification is GNU 5.4.0
-- The CXX compiler identification is GNU 5.4.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
:
:
-- Configuring done
-- Generating done
-- Build files have been written to: /cygdrive/d/Entwicklung/C++/restbed/restbed/build
Nice! Now follows:
make -j install
After 7% working, it gives a bunch of warnings and failed:
/cygdrive/{my_path_to}/restbed/restbed/dependency/asio/asio/include/asio/detail/config.hpp:755:5: warning: #warning Please define _WIN32_WINNT or _WIN32_WINDOWS appropriately. [-Wcpp]
# warning Please define _WIN32_WINNT or _WIN32_WINDOWS appropriately.
^
/cygdrive/{my_path_to}/restbed/restbed/dependency/asio/asio/include/asio/detail/config.hpp:756:5: warning: #warning For example, add -D_WIN32_WINNT=0x0501 to the compiler command line. [-Wcpp]
# warning For example, add -D_WIN32_WINNT=0x0501 to the compiler command line.
^
/cygdrive/{my_path_to}/restbed/restbed/dependency/asio/asio/include/asio/detail/config.hpp:757:5: warning: #warning Assuming _WIN32_WINNT=0x0501 (i.e. Windows XP target). [-Wcpp]
# warning Assuming _WIN32_WINNT=0x0501 (i.e. Windows XP target).
^
/cygdrive/{my_path_to}/restbed/restbed/dependency/asio/asio/include/asio/detail/config.hpp:781:5: error: #error You must add -D__USE_W32_SOCKETS to your compiler options.
I modifing config.hpp and add
#ifndef _WIN32_WINNT
#define _WIN32_WINNT 0x0501
#endif
The 'define bla' warnings dissapear, but now I should set '-D__USE_W32_SOCKETS'.
BUT WHERE?
After researching google I try to set a enviroment variable CPPFLAGS=-D__USE_W32_SOCKETS, but this change nothing!
OK, now I want give MinGW a chance, but how get I rid of this penetrant Cygwin, without deinstalling and get mess with other software?
Cool, should I set some enviroment variables....
Clean up the build-Directory and set CC and CXX as mentioned in cmake output.
SET CC=D:/MinGW/bin/gcc.exe
SET CXX=D:/MinGW/bin/g++.exe
Checking my PATH variable and adding ";D:\MinGW\mysys\1.0\bin;D:\MinGW\bin"
Now use cmake bla.. again...but... but... WHAT?
-- The C compiler identification is GNU 5.3.0
-- The CXX compiler identification is GNU 5.3.0
CMake Error at CMakeLists.txt:4 (project):
The CMAKE_C_COMPILER:
D:/MinGW/bin/gcc.exe
is not a full path and was not found in the PATH.
Tell CMake where to find the compiler by setting either the environment
variable "CC" or the CMake cache entry CMAKE_C_COMPILER to the full path to
the compiler, or to the compiler name if it is in the PATH.
CMake Error at CMakeLists.txt:4 (project):
The CMAKE_CXX_COMPILER:
D:/MinGW/bin/g++.exe
is not a full path and was not found in the PATH.
Tell CMake where to find the compiler by setting either the environment
variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the full path
to the compiler, or to the compiler name if it is in the PATH.
-- Configuring incomplete, errors occurred!
See also "/cygdrive/{my_path_to}/restbed/restbed/build/CMakeFiles/CMakeOutput.log".
With Cygwin cmake says, I use gcc/g++ in version GNU 5.4.0. On the other hand, it detects the correct MinGW version as 5.3.0, but can't find it? Hu?
What can I do to get this library work under Windows 7?
EDIT BEGIN
To build makefiles for Code::Blocks, the -G parameter doesn't work. I try some combinations, but always say:
cmake -DBUILD_TESTS=YES -DBUILD_EXAMPLES=YES -DBUILD_SSL=NO -DBUILD_SHARED=YES -G "CodeBlocks" ..
CMake Error: Could not create named generator CodeBlocks
Generators
Unix Makefiles = Generates standard UNIX makefiles.
Ninja = Generates build.ninja files.
CodeBlocks - Ninja = Generates CodeBlocks project files.
CodeBlocks - Unix Makefiles = Generates CodeBlocks project files.
:
:
cmake -DBUILD_TESTS=YES -DBUILD_EXAMPLES=YES -DBUILD_SSL=NO -DBUILD_SHARED=YES -G "CodeBlocks - Ninja" ..
CMake Error: CMake was unable to find a build program corresponding to "Ninja". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.
CMake Error: CMAKE_C_COMPILER not set, after EnableLanguage
CMake Error: CMAKE_CXX_COMPILER not set, after EnableLanguage
-- Configuring incomplete, errors occurred!
Now this (many censored words) thing want to know the cmake-make?
My fault.... don't think about, what I've installed.
"CodeBlocks - Unix Makefiles" works as expected for generating project file, but can't compile under Code::Blocks. I changed compiler for project in 'Build options' to Cygwin, but says:
Execution of '/usr/bin/make.exe -j8 -f "/cygdrive/d/{my_path_to}/restbed/restbed/build/Makefile" VERBOSE=1 all' in 'D:\{my_path_to}\restbed\restbed\build' failed.
...and nothing more. Think it has to do with "Unix Makefile" under Windows.
EDIT END
I'm out of knowledge what to do, what to set, to delete, to modify, configure, aaaargh.
My last hope is, that someone has the big hint, a good idea or a workaround.
Thanks in advance.
Restbed can build with Visual Studio 2015/2017, why not use the native toolchain for that platform?
Related
I want to run MinGW as a C compiler. MinGW has been installed from Chocolatey. Invocation is from gitlab-runner through CMake. This fails with
$ cmake -G "MinGW Makefiles" -DCMAKE_C_COMPILER=x86_64-w64-mingw32-gcc -DLIB_MAN=OFF -DCMAKE_INSTALL_PREFIX=C:\opt\x64 -B. ..
-- The C compiler identification is unknown
-- Check for working C compiler: C:/ProgramData/chocolatey/bin/x86_64-w64-mingw32-gcc.exe
-- Check for working C compiler: C:/ProgramData/chocolatey/bin/x86_64-w64-mingw32-gcc.exe -- broken
CMake Error at C:/Program Files/CMake/share/cmake-3.16/Modules/CMakeTestCCompiler.cmake:60 (message):
The C compiler
"C:/ProgramData/chocolatey/bin/x86_64-w64-mingw32-gcc.exe"
is not able to compile a simple test program.
It fails with the following output:
Change Dir: C:/gitlab-runner/builds/zjE1Mkfg/0/mlz/kww/build/CMakeFiles/CMakeTmp
Run Build Command(s):C:/ProgramData/chocolatey/bin/mingw32-make.exe cmTC_ffa53/fast && C:/ProgramData/chocolatey/lib/mingw/tools/install/mingw64/bin/mingw32-make -f CMakeFiles\cmTC_ffa53.dir\build.make CMakeFiles/cmTC_ffa53.dir/build
mingw32-make[1]: Entering directory 'C:/gitlab-runner/builds/zjE1Mkfg/0/mlz/kww/build/CMakeFiles/CMakeTmp'
Building C object CMakeFiles/cmTC_ffa53.dir/testCCompiler.c.obj
C:\ProgramData\chocolatey\bin\x86_64-w64-mingw32-gcc.exe -o CMakeFiles\cmTC_ffa53.dir\testCCompiler.c.obj -c C:\gitlab-runner\builds\zjE1Mkfg\0\mlz\kww\build\CMakeFiles\CMakeTmp\testCCompiler.c
mingw32-make[1]: *** [CMakeFiles\cmTC_ffa53.dir\build.make:65: CMakeFiles/cmTC_ffa53.dir/testCCompiler.c.obj] Error 1
mingw32-make[1]: Leaving directory 'C:/gitlab-runner/builds/zjE1Mkfg/0/mlz/kww/build/CMakeFiles/CMakeTmp'
mingw32-make: *** [Makefile:120: cmTC_ffa53/fast] Error 2
CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
CMakeLists.txt:6 (project)
-- Configuring incomplete, errors occurred!
See also "C:/gitlab-runner/builds/zjE1Mkfg/0/mlz/kww/build/CMakeFiles/CMakeOutput.log".
See also "C:/gitlab-runner/builds/zjE1Mkfg/0/mlz/kww/build/CMakeFiles/CMakeError.log".
ERROR: Job failed: exit status 1
From various web sources I understand that MinGW is bound to fail if sh.exe is present on the system [1]. However, sh.exe comes with several applications, among them Git and Visual Studio, which I cannot remove. Somewhere it's suggested to add -DCMAKE_SH="CMAKE_SH-NOTFOUND", which, however, has no effect.
I've seen a related question from 2015 [2], which however involves CLion. The only upvoted answer contains several broken links - altogether, that thread isn't helpful.
How to proceed? Is there a chance to work around the sh.exe problem?
Other advice on the web suggests to use -G "MSYS Makefiles". However, the CMake documentation [3] seems to rule this out: "not compatible with a Windows command prompt. To build under a Windows command prompt, use the MinGW Makefiles generator."
[1] https://stackoverflow.com/a/7411982/1017348
[2] CLion: Error:The C compiler "C:/MinGW/bin/gcc.exe" is not able to compile a simple test program
[3] https://cmake.org/cmake/help/latest/generator/MSYS%20Makefiles.html#generator:MSYS%20Makefiles per CMake 3.16.1
After long experimentation, I conclude that the problem comes from Chocolatey's packaging of MinGW. The problem is gone after I
uninstalled the MinGW package from Chocolatey,
reinstalled MinGW using the original MinGW installer,
installed the Ninja Chocolatey package,
inserted C:\MinGW\bin on top of PATH.
$ cmake -G "Ninja" -DLIB_MAN=OFF -DCMAKE_INSTALL_PREFIX=C:\opt\x64 -B. ..
-- The C compiler identification is GNU 8.2.0
-- Check for working C compiler: C:/MinGW/bin/gcc.exe
-- Check for working C compiler: C:/MinGW/bin/gcc.exe -- works
Also note:
There is no need for -DCMAKE_C_COMPILER=...
I did not try hard to get -G "MinGW Makefile" working; -G Ninja works just fine.
The sh.exe is only a problem when you run CMake the first time when trying to generate the project. You can rerun CMake again and CMake will continue with normal processing to generate the project (tested in version 3.16). I saw a patch that removes this check and should be part of a future release of CMake.
It's already mentioned that gcc is installed incorrectly. That always seems to be the case when anyone mentions that gcc fails with an Error 1 message. It should be noted that Error 1 is not from CMake. CMake is just gathering the output from when it runs mingw32-make to build the sample project.
The first message in the output -- The C compiler identification is unknown is a pretty clear message that your compiler isn't working. All of the output for this step is in the log and error files that CMake generates in the build folder. You'll be able to see how it invoked the compiler and with which options and the output from the compiler.
I'm new to building in Windows. I'm building the following project: https://github.com/arkottke/strata.
The page suggests installing dependencies using MSYS2. I've installed MSYS2 and installed everything as instructed exactly, but I get the following when trying to build using cmake:
$ cmake .. -DCMAKE_BUILD_TYPE=Release
-- The C compiler identification is unknown
-- The CXX compiler identification is unknown
CMake Error at CMakeLists.txt:31 (project):
No CMAKE_C_COMPILER could be found.
Tell CMake where to find the compiler by setting either the environment
variable "CC" or the CMake cache entry CMAKE_C_COMPILER to the full path to
the compiler, or to the compiler name if it is in the PATH.
CMake Error at CMakeLists.txt:31 (project):
No CMAKE_CXX_COMPILER could be found.
Tell CMake where to find the compiler by setting either the environment
variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the full path
to the compiler, or to the compiler name if it is in the PATH.
-- Configuring incomplete, errors occurred!
See also "/home/isb17182/strata/build/CMakeFiles/CMakeOutput.log".
See also "/home/isb17182/strata/build/CMakeFiles/CMakeError.log".
I've seen answers for the same problem on other building platforms, but these are too complicated for me to understand currently. If someone could provide a simple explanation of how to resolve this it would be much appreciated.
Thanks
This is what worked for me
Thanks to everyone who contributed.
Run
pacman -S base-devel gcc
Which will update GCC to latest and verify by
gcc --version
Be sure you're using the cmake of msys2 (as the project build instructions suggest you should install), not a regular Windows cmake installed elsewhere on the system.
which cmake
After this ere execute your command...build done ;)
I am trying to install dlib-19.2 in Window 7.But during the building process of dlib I get these errors.
Configuring cmake ...
-- Building for: NMake Makefiles
-- The C compiler identification is unknown
-- The CXX compiler identification is unknown
CMake Error in CMakeLists.txt:
The CMAKE_C_COMPILER:
cl
is not a full path and was not found in the PATH.
To use the NMake generator with Visual C++, cmake must be run from a shell
that can use the compiler cl from the command line. This environment is
unable to invoke the cl compiler. To fix this problem, run cmake from the
Visual Studio Command Prompt (vcvarsall.bat).
Tell CMake where to find the compiler by setting either the environment
variable "CC" or the CMake cache entry CMAKE_C_COMPILER to the full path to
the compiler, or to the compiler name if it is in the PATH.
CMake Error in CMakeLists.txt:
The CMAKE_CXX_COMPILER:
cl
is not a full path and was not found in the PATH.
To use the NMake generator with Visual C++, cmake must be run from a shell
that can use the compiler cl from the command line. This environment is
unable to invoke the cl compiler. To fix this problem, run cmake from the
Visual Studio Command Prompt (vcvarsall.bat).
Tell CMake where to find the compiler by setting either the environment
variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the full path
to the compiler, or to the compiler name if it is in the PATH.
-- Configuring incomplete, errors occurred!
See also "C:/dlib-19.2/tools/python/build/CMakeFiles/CMakeOutput.log".
See also "C:/dlib-19.2/tools/python/build/CMakeFiles/CMakeError.log".
error: cmake configuration failed!
Can anyone explain me the reason of the error and how to avoid it.Cmake GUI seems to work perfectly fine.
Had the same problem, installing Visual C++ 2015 Build Tools solved it for me:
http://landinghub.visualstudio.com/visual-cpp-build-tools
I'm trying to use Qt Creator for C++ CMake project which doesn't use the Qt libraries.
I'm following the official guide, but it does not work at all. Here are my steps:
Add my MinGW bin directory to PATH.
Run QtCreator and setup CMake.
Open a a very basic CMakeLists.txt file.
Select "Ninja (Desktop)" as CMake generator.
Getting errors from CMake.
You may have noticed that step 4 is actually not mentioned at all in the official guide. I'm quite used to CMake and as such I'm asking myself:
Why doesn't the Qt Creator offer the normal "MinGW Makefiles" generator?
And finally the ultimate question:
How can I make the Qt Creator use a MinGW compiler through CMake?
Answered questions:
According to the official guide and as usual when you set PATH correctly, step 5 should not happen.
Why doesn't CMake find the compiler set in PATH?
It's the Ninja Generator that creates these errors, the same thing happens if you do it manually with CMake.
CMake Error: Error required internal CMake variable not set, cmake may be not be built correctly.
Missing variable is:
CMAKE_CXX_COMPILER_ENV_VAR
CMake Error: Error required internal CMake variable not set, cmake may be not be built correctly.
Missing variable is:
CMAKE_CXX_COMPILER
CMake Error: Could not find cmake module file: D:/Programming/C++/Test/SupportQt/build/CMakeFiles/3.0.2/CMakeCXXCompiler.cmake
CMake Error at CMakeLists.txt:1 (project):
No CMAKE_C_COMPILER could be found.
Tell CMake where to find the compiler by setting the CMake cache entry
CMAKE_C_COMPILER to the full path to the compiler, or to the compiler name
if it is in the PATH.
CMake Error at CMakeLists.txt:1 (project):
No CMAKE_CXX_COMPILER could be found.
Tell CMake where to find the compiler by setting the CMake cache entry
CMAKE_CXX_COMPILER to the full path to the compiler, or to the compiler
name if it is in the PATH.
CMake Error: Error required internal CMake variable not set, cmake may be not be built correctly.
Missing variable is:
CMAKE_C_COMPILER_ENV_VAR
CMake Error: Error required internal CMake variable not set, cmake may be not be built correctly.
Missing variable is:
CMAKE_C_COMPILER
CMake Error: Could not find cmake module file: D:/Programming/C++/Test/SupportQt/build/CMakeFiles/3.0.2/CMakeCCompiler.cmake
CMake Error: CMake was unable to find a build program corresponding to "Ninja". CMAKE_MAKE_PROGRAM is not set. You probably need to select a different build tool.-- Configuring incomplete, errors occurred!
Looking at the configuration menu to see whether I have forgotten to setup something, I stumbled across the compiler setup page. I then of course added my compiler there as well, but it did nothing.
Why doesn't CMake use the compiler list when using CMake?
It does use the compiler list, IF you pick the right compiler in the kits selection.
As usually if you ask for help only to shortly after figure it out, I feel quite stupid now...
Why doesn't the Qt Creator use the compiler list when using CMake?
It does, but only if you set the Kit to use the right compiler!
Why doesn't CMake find the compiler set in PATH?
This is actually the problem of the Ninja Generator with CMake. The same thing happens if you use CMake directly.
Why doesn't the Qt Creator offer the normal "MinGW Makefiles" generator?
It does, but only if you picked a MinGW compiler in your Kit!
How can I make the Qt Creator use a MinGW compiler through CMake?
By setting everything up correctly and not relying too heavily on the official guide.
I have a problem with this CMakeLists.txt file:
cmake_minimum_required(VERSION 2.6)
SET(CMAKE_C_COMPILER C:/MinGW/bin/gcc)
SET(CMAKE_CXX_COMPILER C:/MinGW/bin/g++)
project(cmake_test)
add_executable(a.exe test.cpp)
Calling cmake with: cmake -G "MinGW Makefiles" , it fails with the following output:
c:\Users\pietro.mele\projects\tests\buildSystem_test\cmake_test>cmake -G "MinGW Makefiles" .
-- The C compiler identification is GNU 4.6.1
-- The CXX compiler identification is GNU 4.6.1
-- Check for working C compiler: C:/MinGW/bin/gcc
CMake Error: your C compiler: "C:/MinGW/bin/gcc" was not found. Please set CMAKE_C_COMPILER to a valid compiler path or name.
CMake Error: Internal CMake error, TryCompile configure of cmake failed
-- Check for working C compiler: C:/MinGW/bin/gcc -- broken
CMake Error at C:/Program Files (x86)/CMake 2.8/share/cmake-2.8/Modules/CMakeTestCCompiler.cmake:52 (MESSAGE):
The C compiler "C:/MinGW/bin/gcc" is not able to compile a simple test
program.
CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
CMakeLists.txt:10 (project)
CMake Error: your C compiler: "C:/MinGW/bin/gcc" was not found. Please set CMAKE_C_COMPILER to a valid compiler path or name.
CMake Error: your CXX compiler: "C:/MinGW/bin/g++" was not found. Please set CMAKE_CXX_COMPILER to a valid compiler path or name.
-- Configuring incomplete, errors occurred!
However the gcc compiler is in C:/MinGW/bin/ and it works.
Any idea?
Platform:
Windows 7
MinGW/GCC 4.6
Never try to set the compiler in the CMakeLists.txt file.
See the CMake FAQ about how to use a different compiler:
https://gitlab.kitware.com/cmake/community/wikis/FAQ#how-do-i-use-a-different-compiler
(Note that you are attempting method #3 and the FAQ says "(avoid)"...)
We recommend avoiding the "in the CMakeLists" technique because there are problems with it when a different compiler was used for a first configure, and then the CMakeLists file changes to try setting a different compiler... And because the intent of a CMakeLists file should be to work with multiple compilers, according to the preference of the developer running CMake.
The best method is to set the environment variables CC and CXX before calling CMake for the very first time in a build tree.
After CMake detects what compilers to use, it saves them in the CMakeCache.txt file so that it can still generate proper build systems even if those variables disappear from the environment...
If you ever need to change compilers, you need to start with a fresh build tree.
I had similar problem as Pietro,
I am on Window 10 and using "Git Bash".
I tried to execute >>cmake -G "MinGW Makefiles", but I got the same error as Pietro.
Then, I tried >>cmake -G "MSYS Makefiles", but realized that I need to set my environment correctly.
Make sure set a path to C:\MinGW\msys\1.0\bin and check if you have gcc.exe there. If gcc.exe is not there then you have to run C:/MinGW/bin/mingw-get.exe and install gcc from MSYS.
After that it works fine for me
Using with FILEPATH option might work:
set(CMAKE_CXX_COMPILER:FILEPATH C:/MinGW/bin/gcc.exe)
I had the same issue. And in my case the fix was pretty simple. The trick is to simply add the ".exe" to your compilers path. So, instead of :
SET(CMAKE_C_COMPILER C:/MinGW/bin/gcc)
It should be
SET(CMAKE_C_COMPILER C:/MinGW/bin/gcc.exe)
The same applies for g++.