I am using spring JMS to connect to WSO2MB server. Everything is working fine, but all listeners are assigned the same id. To make it unique, I provided clientId but it is not working. I am not finding any other field where I can provide the name.
I even provided id on the JMS listener but no success.
#Bean
#ConditionalOnProperty(name="my.listener.active", matchIfMissing = true)
public JmsListenerContainerFactory jmsListenerContainerFactory(#Qualifier("listenerConnectionFactory") ConnectionFactory connectionFactory) throws URLSyntaxException {
DefaultJmsListenerContainerFactory factory = new DefaultJmsListenerContainerFactory();
factory.setConnectionFactory(connectionFactory);
factory.setClientId("listener"+listenerTopic);
if (Boolean.valueOf(listenerTopic)) {
factory.setSubscriptionDurable(true);
factory.setPubSubDomain(true);
}
return factory;
}
#JmsListener(destination = "${default-queue-name-to-listen}", id = "${default-queue-name-to-listen}")
public void receiveMessage(final Message<T> message) throws JMSException {
}
each connection need to have a unique clientID
void org.apache.activemq.ActiveMQConnectionFactory.setClientID(String
clientID)
Sets the JMS clientID to use for the created connection.
Note that this can only be used by one connection at once so generally
its a better idea to set the clientID on a Connection
your solution is to use org.springframework.jms.connection.SingleConnectionFactory
subscription name made the connection name unique and resolved my problem
#JmsListener(
destination = "${default-queue-name-to-listen}",
subscription = "${default-queue-name-to-listen}"
)
public void receiveMessage(Message<T> message) throws JMSException {}
Related
It is a rather simple question... I have a spring project where I consume queues (CONSUMER).
Now I want to configure individual dead letter queues for each queue I am consuming.
However, in my mind, the individual dead letter queues configuration must be done in the broker service (SERVER), not in the CONSUMER. Is it really so?
My code below WILL NOT work, correct?
#Bean
public DeadLetterStrategy deadLetterStrategy(){
IndividualDeadLetterStrategy dlq = new IndividualDeadLetterStrategy();
dlq.setQueueSuffix(".DLQ");
dlq.setUseQueueForQueueMessages(true);
return dlq;
}
#Bean
public ActiveMQConnectionFactory consumerActiveMQConnectionFactory() {
var activeMQConnectionFactory = new ActiveMQConnectionFactory();
activeMQConnectionFactory.setBrokerURL(brokerUrl);
RedeliveryPolicy policy = activeMQConnectionFactory.getRedeliveryPolicy();
policy.setMaximumRedeliveries(maximumRedeliveries);
policy.setInitialRedeliveryDelay(0);
policy.setBackOffMultiplier(3);
policy.setUseExponentialBackOff(true);
return activeMQConnectionFactory;
}
#Bean
public DefaultJmsListenerContainerFactory jmsListenerContainerFactory() {
var factory = new DefaultJmsListenerContainerFactory();
factory.setSessionAcknowledgeMode(JmsProperties.AcknowledgeMode.CLIENT.getMode());
factory.setConcurrency(factoryConcurrency);
factory.setConnectionFactory(consumerActiveMQConnectionFactory());
return factory;
}
#Bean
public BrokerService broker() throws Exception {
final BrokerService broker = new BrokerService();
broker.addConnector(brokerUrl);
broker.setPersistent(false);
broker.setDestinationPolicy(policyMap());
return broker;
}
#Bean
public PolicyMap policyMap() {
PolicyMap destinationPolicy = new PolicyMap();
List<PolicyEntry> entries = new ArrayList<PolicyEntry>();
PolicyEntry queueEntry = new PolicyEntry();
queueEntry.setQueue(">"); // In activemq '>' does the same thing as '*' does in other languages
queueEntry.setDeadLetterStrategy(deadLetterStrategy());
entries.add(queueEntry);
destinationPolicy.setPolicyEntries(entries);
return destinationPolicy;
} }
#JmsListener(destination = "myqueue")
public void onMessage(Message message, Session session) throws JMSException {
try {
stuff()
message.acknowledge();
} catch (Exception ex) {
session.recover();
}
}
A JMS consumer in ActiveMQ 5.x cannot configure the broker side dead letter strategy, this must be done at the broker in the configuration XML or via programmatic broker configuration. You could configure it in spring as you've done if your broker is simply an in memory broker however that is of little use for most applications.
Refer to the broker documentation for more help on configuration of the broker.
I'm using Apache ActiveMQ 5.15.13 and Spring Boot 2.3.1.RELEASE. I'm trying to configure durable subscriber, but I'm not able do do. My application on runtime gives me an error as
Cause: setClientID call not supported on proxy for shared Connection. Set the 'clientId' property on the SingleConnectionFactory instead.
Below is the complete ActiveMQ setup with Spring Boot.
JMSConfiguration
public class JMSConfiguration
{
#Bean
public JmsListenerContainerFactory<?> connectionFactory(ConnectionFactory connectionFactory,
DefaultJmsListenerContainerFactoryConfigurer configurer)
{
DefaultJmsListenerContainerFactory factory = new DefaultJmsListenerContainerFactory();
// This provides all boot's default to this factory, including the message converter
configurer.configure(factory, connectionFactory);
// You could still override some of Boot's default if necessary.
factory.setPubSubDomain(true);
/* below config to set durable subscriber */
factory.setClientId("brokerClientId");
factory.setSubscriptionDurable(true);
// factory.setSubscriptionShared(true);
return factory;
}
#Bean
public MessageConverter jacksonJmsMessageConverter()
{
MappingJackson2MessageConverter converter = new MappingJackson2MessageConverter();
converter.setTargetType(MessageType.TEXT);
converter.setTypeIdPropertyName("_type");
return converter;
}
}
Receiver Class
public class Receiver {
private static final String MESSAGE_TOPIC = "message_topic";
private Logger logger = LoggerFactory.getLogger(Receiver.class);
private static AtomicInteger id = new AtomicInteger();
#Autowired
ConfirmationReceiver confirmationReceiver;
#JmsListener(destination = MESSAGE_TOPIC,
id = "comercial",
subscription = MESSAGE_TOPIC,
containerFactory = "connectionFactory")
public void receiveMessage(Product product, Message message)
{
logger.info(" >> Original received message: " + message);
logger.info(" >> Received product: " + product);
System.out.println("Received " + product);
confirmationReceiver.sendConfirmation(new Confirmation(id.incrementAndGet(), "User " +
product.getName() + " received."));
}
}
application.properties
spring.jms.pub-sub-domain=true
spring.jms.listener.concurrency=1
spring.jms.listener.max-concurrency=2
spring.jms.listener.acknowledge-mode=auto
spring.jms.listener.auto-startup=true
spring.jms.template.delivery-mode:persistent
spring.jms.template.priority: 100
spring.jms.template.qos-enabled: true
spring.jms.template.receive-timeout: 1000
spring.jms.template.time-to-live: 36000
When i try to run application it gives me error as below
Could not refresh JMS Connection for destination 'message_topic' - retrying using FixedBackOff{interval=5000, currentAttempts=1, maxAttempts=unlimited}. Cause: setClientID call not supported on proxy for shared Connection. Set the 'clientId' property on the SingleConnectionFactory instead.
My application has standalone producer and consumer. I did try to Google the error but nothing helped.
Late answer. Here is what worked for me.
Use SingleConnectionFactory in place of ConnectionFactory
Set client-id to SingleConnectionFactory
Do not set client-id to factory
public JmsListenerContainerFactory<?> connectionFactory(SingleConnectionFactory connectionFactory,
DefaultJmsListenerContainerFactoryConfigurer configurer) {
// Add this
connectionFactory.setClientId("your-client-id")
// Do not do this
//factory.setClientId("brokerClientId");
I do have a Spring Boot 5 application and I also have it running against one IBM MQ server.
Now we want it to connect to three or more MQ servers. My intention is now to just add XY connection infos to the environment and then I get XY MQConnectionFactory beans and al the other beans that are needed for processing.
At the moment this is what I have:
#Bean
#Qualifier(value="MQConnection")
public MQConnectionFactory getIbmConnectionFactory() throws JMSException {
MQConnectionFactory factory = new MQConnectionFactory();
// seeting all the parameters here
return factory;
}
But this is quite static. Is there an elegant way of doing this?
I stumbled about IntegrationFlow. Is this a possibly working solution?
Thanks for all your tipps!
KR
Solution
Based on Artem Bilan's response I built this class.
#Configuration
public class ConnectionWithIntegrationFlowMulti {
protected static final Logger LOG = Logger.create();
#Value("${mq.queue.jms.sources.queue.queue-manager}")
private String queueManager;
#Autowired
private ConnectionConfig connectionConfig;
#Autowired
private SSLSocketFactory sslSocketFactory;
#Bean
public MessageChannel queureader() {
return new DirectChannel();
}
#Autowired
private IntegrationFlowContext flowContext;
#PostConstruct
public void processBeanDefinitionRegistry() throws BeansException {
Assert.notEmpty(connectionConfig.getTab().getLocations(), "At least one CCDT file locations must be provided.");
for (String tabLocation : connectionConfig.getTab().getLocations()) {
try {
IntegrationFlowRegistration theFlow = this.flowContext.registration(createFlow(tabLocation)).register();
LOG.info("Registered bean flow for %s with id = %s", queueManager, theFlow.getId());
} catch (JMSException e) {
LOG.error(e);
}
}
}
public IntegrationFlow createFlow(String tabLocation) throws JMSException {
LOG.info("creating ibmInbound");
return IntegrationFlows.from(Jms.messageDrivenChannelAdapter(getConnection(tabLocation)).destination(createDestinationBean()))
.handle(m -> LOG.info("received payload: " + m.getPayload().toString()))
.get();
}
public MQConnectionFactory getConnection(String tabLocation) throws JMSException {
MQConnectionFactory factory = new MQConnectionFactory();
// doing stuff
return factory;
}
#Bean
public MQQueue createDestinationBean() {
LOG.info("creating destination bean");
MQQueue queue = new MQQueue();
try {
queue.setBaseQueueManagerName(queueManager);
queue.setBaseQueueName(queueName);
} catch (Exception e) {
LOG.error(e, "destination bean: Error for integration flow");
}
return queue;
}
}
With Spring Integration you can create IntegrationFlow instances dynamically at runtime. For that purpose there is an IntegrationFlowContext with its registration() API. The returned IntegrationFlowRegistrationBuilder as a callback like:
/**
* Add an object which will be registered as an {#link IntegrationFlow} dependant bean in the
* application context. Usually it is some support component, which needs an application context.
* For example dynamically created connection factories or header mappers for AMQP, JMS, TCP etc.
* #param bean an additional arbitrary bean to register into the application context.
* #return the current builder instance
*/
IntegrationFlowRegistrationBuilder addBean(Object bean);
So, your MQConnectionFactory instances can be populated alongside with the other flow, used as references in the particular JMS components and registered as beans, too.
See more info in docs: https://docs.spring.io/spring-integration/docs/5.2.3.RELEASE/reference/html/dsl.html#java-dsl-runtime-flows
If you are fine with creating them statically, you can create the beans as you are now (each having a unique qualifier), but you can access them all dynamically in your services / components by having an #Autowired List<MQConnectionFactory> field or #Autowired Map<String, MQConnectionFactory> field. Spring will automatically populate the fields with all of the beans of type MQConnectionFactory
In the the Map implementation, the String will be the qualifier value.
If you also want to create the beans dynamically based on some properties, etc, it gets a little more complicated. You will need to look into something along the lines of instantiating beans at runtime
I am trying to connect to a remote HornetQ broker in a spring boot/spring jms application and setup a #JmsListener.
HornetQ ConnectionFactory is being fetched from JNDI registry that HornetQ instance hosts. Everything works fine as long as HornetQ security is turned off but when it is turned on I get this error
WARN o.s.j.l.DefaultMessageListenerContainer : Setup of JMS message listener invoker failed for destination 'jms/MI/Notification/Queue' - trying to recover. Cause: User: null doesn't have permission='CONSUME' on address jms.queue.MI/Notification/Queue
I ran a debug session to figure out that ConnectionFactory instance being returned is HornetQXAConnectionFactory but user and password fields are not set, which I believe is why user is null. I verified that user principal and credentials are set in JNDI properties but somehow it is not being passed on to ConnectionFactory instance. Any help on how I can get this setup working would be greatly appreciated.
This is my jms related config
#Configuration
#EnableJms
public class JmsConfig {
#Bean
public JmsListenerContainerFactory<?> jmsListenerContainerFactory(ConnectionFactory connectionFactory,
DefaultJmsListenerContainerFactoryConfigurer configurer) {
DefaultJmsListenerContainerFactory factory = new DefaultJmsListenerContainerFactory();
configurer.configure(factory, connectionFactory);
factory.setDestinationResolver(destinationResolver());
return factory;
}
#Bean // Serialize message content to json using TextMessage
public MessageConverter jacksonJmsMessageConverter() {
MappingJackson2MessageConverter converter = new MappingJackson2MessageConverter();
converter.setTargetType(MessageType.BYTES);
converter.setTypeIdPropertyName("_type");
return converter;
}
#Value("${jms.jndi.provider.url}")
private String jndiProviderURL;
#Value("${jms.jndi.principal}")
private String jndiPrincipal;
#Value("${jms.jndi.credentials}")
private String jndiCredential;
#Bean
public JndiTemplate jndiTemplate() {
Properties env = new Properties();
env.put("java.naming.factory.initial", "org.jnp.interfaces.NamingContextFactory");
env.put("java.naming.provider.url", jndiProviderURL);
env.put("java.naming.security.principal", jndiPrincipal);
env.put("java.naming.security.credentials", jndiCredential);
return new JndiTemplate(env);
}
#Bean
public DestinationResolver destinationResolver() {
JndiDestinationResolver destinationResolver = new JndiDestinationResolver();
destinationResolver.setJndiTemplate(jndiTemplate());
return destinationResolver;
}
#Value("${jms.connectionfactory.jndiname}")
private String connectionFactoryJNDIName;
#Bean
public JndiObjectFactoryBean connectionFactoryFactory() {
JndiObjectFactoryBean jndiObjectFactoryBean = new JndiObjectFactoryBean();
jndiObjectFactoryBean.setJndiTemplate(jndiTemplate());
jndiObjectFactoryBean.setJndiName(connectionFactoryJNDIName);
jndiObjectFactoryBean.setResourceRef(true);
jndiObjectFactoryBean.setProxyInterface(ConnectionFactory.class);
return jndiObjectFactoryBean;
}
#Bean
public ConnectionFactory connectionFactory(JndiObjectFactoryBean connectionFactoryFactory) {
return (ConnectionFactory) connectionFactoryFactory.getObject();
}
}
JNDI and JMS are 100% independent as they are completely different specifications implemented in potentially completely different ways. Therefore the credentials you use for your JNDI lookup do not apply to your JMS resources. You need to explicitly set the username and password credentials on your JMS connection. This is easy using the JMS API directly (e.g. via javax.jms.ConnectionFactory#createConnection(String username, String password)). Since you're using Spring you could use something like this:
#Bean
public ConnectionFactory connectionFactory(JndiObjectFactoryBean connectionFactoryFactory) {
UserCredentialsConnectionFactoryAdapter cf = new UserCredentialsConnectionFactoryAdapter();
cf.setTargetConnectionFactory((ConnectionFactory) connectionFactoryFactory.getObject());
cf.setUsername("yourJmsUsername");
cf.setPassword("yourJmsPassword");
return cf;
}
Also, for what it's worth, the HornetQ code-base was donated to the Apache ActiveMQ project three and a half years ago now and it lives on as the Apache ActiveMQ Artemis broker. There's been 22 releases since then with numerous new features and bug fixes. I strongly recommend you migrate if at all possible.
Wrap the connection factory in a UserCredentialsConnectionFactoryAdapter.
/**
* An adapter for a target JMS {#link javax.jms.ConnectionFactory}, applying the
* given user credentials to every standard {#code createConnection()} call,
* that is, implicitly invoking {#code createConnection(username, password)}
* on the target. All other methods simply delegate to the corresponding methods
* of the target ConnectionFactory.
* ...
I like to read pending (not acknowledged) messages in a ActiveMQ queue using Spring boot. How to do that?
So far I can read a message the moment it is send to the queue:
#JmsListener(destination = "LOCAL.TEST",
containerFactory = "myJmsListenerContainerFactory")
public void receiveMessage(final Message jsonMessage) throws JMSException {
String messageData = null;
// jsonMessage.acknowledge(); // dont consume message (for testing)
LOGGER.info("=== Received message {}", jsonMessage);
}
using a standard configuration for the mq-connection:
#Bean
public ActiveMQConnectionFactory getActiveMQConnectionFactory() {
ActiveMQConnectionFactory activeMQConnectionFactory = new ActiveMQConnectionFactory();
activeMQConnectionFactory.setBrokerURL(BROKER_URL + ":" + BROKER_PORT);
return activeMQConnectionFactory;
}
and a standard ListenerContainerFactory:
#Bean
public DefaultJmsListenerContainerFactory myJmsListenerContainerFactory() {
DefaultJmsListenerContainerFactory factory = new DefaultJmsListenerContainerFactory();
factory.setConnectionFactory(getActiveMQConnectionFactory());
factory.setConcurrency("1-1");
return factory;
}
But this just loggs a message if I manually send one using
#Autowired
private JmsTemplate jmsTemplate;
public void send(String destination, String message) {
LOGGER.info("sending message='{}' to destination='{}'", message, destination);
jmsTemplate.convertAndSend(destination, message);
}
with the standard template
#Bean
public JmsTemplate jmsTemplate() {
JmsTemplate template = new JmsTemplate();
template.setConnectionFactory(getActiveMQConnectionFactory());
return template;
}
I cannot read messages sent earlier that are still in the Queue (since I didn't .acknowledge() them)...
JMS supports "browsing" messages which appears to be the functionality you want. You should therefore change your Spring application to use a QueueBrowser instead of actually consuming the messages.
Messages won't be resent if not acknowledged. They are not returned to the queue until the session is closed or the connection lost, for example by stopping (and restarting) the listener container created by the factory.
You can access the container using the JmsListenerEndpointRegistry bean (or stop/start the entire registry which will stop/start all of its containers).
To read all pending messages, you can do like this
ConnectionFactory connectionFactory = new ActiveMQConnectionFactory("tcp://localhost:61616?jms.redeliveryPolicy.maximumRedeliveries=1");
Connection connection = connectionFactory.createConnection("admin", "admin");
connection.start();
Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
Destination destination = session.createQueue("listenerQueue");
MessageConsumer consumer = session.createConsumer(destination);
QueueBrowser browser = session.createBrowser((Queue) destination);
Enumeration elems = browser.getEnumeration();
while (elems.hasMoreElements()) {
Message message = (Message) consumer.receive();
if (message instanceof TextMessage) {
TextMessage textMessage = (TextMessage) message;
System.out.println("Incoming Message: '" + textMessage.getText() + "'");
message.acknowledge();
}
}
connection.close();
Step by step implementation of Spring boot ActiveMQ. Lets write some code to make it more clear. This will help to read all pending messages in current session only.
Add these dependencies in pom.xml file.
<!-- Dependencies to setup JMS and active mq environment -->
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-activemq</artifactId>
</dependency>
<dependency>
<groupId>org.apache.activemq</groupId>
<artifactId>activemq-broker</artifactId>
</dependency>
Add #EnableJms into your main controller where your main() method exists.
Create connection factory by adding these 2 methods in application controller only.
#Bean
public JmsListenerContainerFactory<?> myFactory(
ConnectionFactory connectionFactory,
DefaultJmsListenerContainerFactoryConfigurer configurer) {
DefaultJmsListenerContainerFactory factory = new DefaultJmsListenerContainerFactory();
logger.info("configuring jms connection factory....");
// anonymous class
factory.setErrorHandler(
new ErrorHandler() {
#Override
public void handleError(Throwable t) {
logger.error("An error has occurred in the transaction", t);
}
});
// lambda function
factory.setErrorHandler(t -> logger.info("An error has occurred in the transaction"));
configurer.configure(factory, connectionFactory);
return factory;
}
// Serialize message content to json using TextMessage
#Bean
public MessageConverter jacksonJmsMessageConverter() {
MappingJackson2MessageConverter converter = new MappingJackson2MessageConverter();
converter.setTargetType(MessageType.TEXT);
converter.setTypeIdPropertyName("_type");
return converter;
}
Mention credentials in in application.yml file as
spring.activemq.user=admin
spring.activemq.password=admin
spring.activemq.broker-url=tcp://localhost:61616?jms.redeliveryPolicy.maximumRedeliveries=1
Autowire jmsTemplate in any spring bean class.
#Autowired
private JmsTemplate jmsTemplate;
Now it is time to send message to a queue.
jmsTemplate.convertAndSend("anyQueueName", "value1");
jmsTemplate.convertAndSend("anyQueueName", "value2");
...
Add a jmslistener. This method will be called automatically by JMS when any message will be pushed to queue.
#JmsListener(destination ="anyQueueName", containerFactory = "myFactory")
public void receiveMessage(String user) {
System.out.println("Received <" + user + ">");
}
Manually you can read the messages available in queue:-
import javax.jms.TextMessage;
import javax.jms.QueueBrowser;
import javax.jms.Session;
import javax.jms.TextMessage;
public void readMessageFromQueue(){
jmsTemplate.browse("anyQueueName", new BrowserCallback<TextMessage>() {
#Override
public TextMessage doInJms(Session session, QueueBrowser browser) throws JMSException {
Enumeration<TextMessage> messages = browser.getEnumeration();
while (messages.hasMoreElements()) {
System.out.println("message found : -"+ messages.nextElement().getText());
}
}
});
}
Output :-
message found :- value1
message found :- value2
-Happy Coding