how to remove comment lines (as # bal bla ) and empty lines (lines without charecters) from file with one sed command?
THX
lidia
If you're worried about starting two sed processes in a pipeline for performance reasons, you probably shouldn't be, it's still very efficient. But based on your comment that you want to do in-place editing, you can still do that with distinct commands (sed commands rather than invocations of sed itself).
You can either use multiple -e arguments or separate commands with a semicolon, something like (just one of these, not both):
sed -i 's/#.*$//' -e '/^$/d' fileName
sed -i 's/#.*$//;/^$/d' fileName
The following transcript shows this in action:
pax> printf 'Line # with a comment\n\n# Line with only a comment\n' >file
pax> cat file
Line # with a comment
# Line with only a comment
pax> cp file filex ; sed -i 's/#.*$//;/^$/d' filex ; cat filex
Line
pax> cp file filex ; sed -i -e 's/#.*$//' -e '/^$/d' filex ; cat filex
Line
Note how the file is modified in-place even with two -e options. You can see that both commands are executed on each line. The line with a comment first has the comment removed then all is removed because it's empty.
In addition, the original empty line is also removed.
#paxdiablo has a good answer but it can be improved.
(1) The '/^$/d' clause only matches 100% blank lines.
If you want to also match lines that are entirely whitespace (spaces, tabs etc.) use this instead:
'/^\s*$/d'
(2) The 's/#.*$//' clause only matches lines that start with the # character in column 0.
If you want to also match lines that have only whitespace before the first # use this instead:
'/^\s*#.*$/d'
The above criteria may not be universal (e.g. within a HEREDOC block, or in a Python multi-line string the different approaches could be significant), but in many cases the conventional definition of "blank" lines include whitespace-only, and "comment" lines include whitespace-then-#.
(3) Lastly, on OSX at least, the #paxdiablo solution in which the first clause turns comment lines into blank lines, and the second clause strips blank lines (including what were originally comments) doesn't work. It seems to be more portable to make both clauses /d delete actions as I've done.
The revised command incorporating the above is:
sed -e '/^\s*#.*$/d' -e '/^\s*$/d' inputFile
This tiny jewel removes all # comments, no matter where they begin in a line (see caution below):
sed -e 's/\s*#.*$//'
Example:
text="
this is a # test
#this is a test
#this is a #test
this is # another #test
"
$echo "$text" | sed -e 's/\s*#.*$//'
this is a
this is
Next this removes any resulting blank lines:
$echo "$text" | sed -e 's/\s*#.*$//' | sed -e '/^\s*$/d'
Caution: Depending on the syntax and/or interpretation of the lines your processing, this might not be an appropriate solution, as it just stupidly removes end of lines, even if the '#' is part of your data or code. However, for use cases where you'll never use a hash except for as an end of line comment then it works fine. So just as with all coding, context must be taken into consideration.
Alternative variant, using grep:
cat file.txt | grep -Ev '(#.*$)|(^$)'
you can use awk
awk 'NF{gsub(/^[ \t]*#/,"");print}' file
First example(paxdiablo) is very good except its not change file, just output result. If you want to change it inline:
sudo sed -i 's/#.*$//;/^$/d' inputFile
On (one of) my linux boxes, sed understands extended regular expressions with the -r option, so:
sed -r '/(^\s*#)|(^\s*$)/d' squid.conf.installed
is very useful for showing all non-blank, non comment lines.
The regex matches either start of line followed by zero or more spaces or tabs followed by either a hash or end of line, and deletes those matching lines from the input.
I have an ASCII-Textfile with only one (long) line in it. I want to do a normal sed on it but nothing works. vi shows me with :set list that the line ends with an $
If i add a new line manually with vi the sed command works. If i do this:
echo $(cat file) |sed 's/.*test//g'
it does work too. Any idea why sed cant work with that?
The commandf echo $(cat file) is not going to preserve white space very well.
You should be able to add a newline, while leaving the rest of the file untouched, quite easily with:
( cat inputFile ; echo ) | sed 'something or other'
Just keep in mind that some sed implementations don't actually like very long lines. POSIX, I believe, mandated only a 8K minimum requirement. You should be okay if you're using the GNU variant, though.
I am having trouble using sed to substitute values and write to a new file. It writes to a new file, but fails to change any values. Here is my code:
cd/mydirectory
echo "Enter file name:"
read file_input
file1= "$file_input"
file1= "$file1.b"
file2= "$file_input"
file2= "${file2}Ins.b"
sed "/\!cats!/s/\!cats!.*/cats!300!/g $file1>$file2
I simply want to substitute whatever text was after cats with the value 300. Whenever I run this script it doesn't overwrite the previous value with 300. Any suggestions?
Try changing
sed "/\!cats!/s/\!cats!.*/cats!300!/g $file1>$file2
to
sed "s/cats.*/cats300/g" $file1 > $file2
To replace text, you often have to use sed like sed "s/foo/bar/g" file_in > file_out, to change all occurrences of foo with bar in file_in, redirecting the output to file_out.
Edit
I noticed that you are redirecting the output to the same file - you can't do that. You have 2 options:
Redirect the results to another file, with a different filename. e.g.:
sed "s/cats.*/cats300/g" $file1 > $file2.tmp
Note the .tmp after $file2
Use the -i flag (if using GNU sed):
sed -i "s/cats.*/cats300/g" $file1
The i stands for inline replacement.
I think this modified version of your script should work:
echo "Enter file name:"
read file_input
file1="$file_input" # No space after '='
file1="$file1.b" # No space after '='
file2="$file_input" # No space after '='
file2="${file2}Ins.b" # No space after '='
sed 's/!cats!.*/!cats!300!/g' "$file1" > "$file2"
Note the single quotes around sed expression: with them, there's no need to escape the !s in your expression. Note also the double quotes around "$file1" and "$file2": if one of those variables contain spaces, this will prevent your command from breaking.
Some further remarks:
As pointed by jim, you may want to use the GNU sed -i option.
Your regex will currently replace everything after !cats! in matching lines. If they were several occurences of !cats! on your line, only one will remain. If instead you just want to replace the value between two ! delimiters, you may consider use following sed command instead:
sed 's/!cats![^!]*/!cats!300/g'
I'm using a sed command for replacing some words in text files. This command is embedded in a ksh script.
I would like to reach that not everytime will every replacement rule of sed fire, only if some conditions are filled. E.g. depending on a value of a shell variable.
In other words I would like to write this script without the if statement, I would rather include the conditional expression inside the sed. Is it possible?
REPLACE_A=TRUE
if [ "$REPLACE_A" = "TRUE" ]
then
cat myfile \
| sed 's/A/B/g;
's/C/D/g;
's/E/F/g;'
else
cat myfile \
| sed 's/C/D/g;
's/E/F/g;'
fi
The only solution that pops into my mind is to store the sed command in a variable, like
# in your script
SEDCMD=""
# ...
SEDCMD="s/A/B/g;"
# later
SEDCMD="${SEDCMD}s/C/D/g;"
# ...
# finally
sed "$SEDCMD" FILE
But it still not the solution you want.
You can't do it with sed, but with awk. If you like to try, I suggest you have a look at this:
http://www.grymoire.com/Unix/Awk.html
How to insert a newline before a pattern within a line?
For example, this will insert a newline behind the regex pattern.
sed 's/regex/&\n/g'
How can I do the same but in front of the pattern?
Given this sample input file, the pattern to match on is the phone number.
some text (012)345-6789
Should become
some text
(012)345-6789
This works in bash and zsh, tested on Linux and OS X:
sed 's/regexp/\'$'\n/g'
In general, for $ followed by a string literal in single quotes bash performs C-style backslash substitution, e.g. $'\t' is translated to a literal tab. Plus, sed wants your newline literal to be escaped with a backslash, hence the \ before $. And finally, the dollar sign itself shouldn't be quoted so that it's interpreted by the shell, therefore we close the quote before the $ and then open it again.
Edit: As suggested in the comments by #mklement0, this works as well:
sed $'s/regexp/\\\n/g'
What happens here is: the entire sed command is now a C-style string, which means the backslash that sed requires to be placed before the new line literal should now be escaped with another backslash. Though more readable, in this case you won't be able to do shell string substitutions (without making it ugly again.)
Some of the other answers didn't work for my version of sed.
Switching the position of & and \n did work.
sed 's/regexp/\n&/g'
Edit: This doesn't seem to work on OS X, unless you install gnu-sed.
In sed, you can't add newlines in the output stream easily. You need to use a continuation line, which is awkward, but it works:
$ sed 's/regexp/\
&/'
Example:
$ echo foo | sed 's/.*/\
&/'
foo
See here for details. If you want something slightly less awkward you could try using perl -pe with match groups instead of sed:
$ echo foo | perl -pe 's/(.*)/\n$1/'
foo
$1 refers to the first matched group in the regular expression, where groups are in parentheses.
On my mac, the following inserts a single 'n' instead of newline:
sed 's/regexp/\n&/g'
This replaces with newline:
sed "s/regexp/\\`echo -e '\n\r'`/g"
echo one,two,three | sed 's/,/\
/g'
You can use perl one-liners much like you do with sed, with the advantage of full perl regular expression support (which is much more powerful than what you get with sed). There is also very little variation across *nix platforms - perl is generally perl. So you can stop worrying about how to make your particular system's version of sed do what you want.
In this case, you can do
perl -pe 's/(regex)/\n$1/'
-pe puts perl into a "execute and print" loop, much like sed's normal mode of operation.
' quotes everything else so the shell won't interfere
() surrounding the regex is a grouping operator. $1 on the right side of the substitution prints out whatever was matched inside these parens.
Finally, \n is a newline.
Regardless of whether you are using parentheses as a grouping operator, you have to escape any parentheses you are trying to match. So a regex to match the pattern you list above would be something like
\(\d\d\d\)\d\d\d-\d\d\d\d
\( or \) matches a literal paren, and \d matches a digit.
Better:
\(\d{3}\)\d{3}-\d{4}
I imagine you can figure out what the numbers in braces are doing.
Additionally, you can use delimiters other than / for your regex. So if you need to match / you won't need to escape it. Either of the below is equivalent to the regex at the beginning of my answer. In theory you can substitute any character for the standard /'s.
perl -pe 's#(regex)#\n$1#'
perl -pe 's{(regex)}{\n$1}'
A couple final thoughts.
using -ne instead of -pe acts similarly, but doesn't automatically print at the end. It can be handy if you want to print on your own. E.g., here's a grep-alike (m/foobar/ is a regex match):
perl -ne 'if (m/foobar/) {print}'
If you are finding dealing with newlines troublesome, and you want it to be magically handled for you, add -l. Not useful for the OP, who was working with newlines, though.
Bonus tip - if you have the pcre package installed, it comes with pcregrep, which uses full perl-compatible regexes.
In this case, I do not use sed. I use tr.
cat Somefile |tr ',' '\012'
This takes the comma and replaces it with the carriage return.
To insert a newline to output stream on Linux, I used:
sed -i "s/def/abc\\\ndef/" file1
Where file1 was:
def
Before the sed in-place replacement, and:
abc
def
After the sed in-place replacement. Please note the use of \\\n. If the patterns have a " inside it, escape using \".
Hmm, just escaped newlines seem to work in more recent versions of sed (I have GNU sed 4.2.1),
dev:~/pg/services/places> echo 'foobar' | sed -r 's/(bar)/\n\1/;'
foo
bar
echo pattern | sed -E -e $'s/^(pattern)/\\\n\\1/'
worked fine on El Captitan with () support
In my case the below method works.
sed -i 's/playstation/PS4/' input.txt
Can be written as:
sed -i 's/playstation/PS4\nplaystation/' input.txt
PS4
playstation
Consider using \\n while using it in a string literal.
sed : is stream editor
-i : Allows to edit the source file
+: Is delimiter.
I hope the above information works for you 😃.
in sed you can reference groups in your pattern with "\1", "\2", ....
so if the pattern you're looking for is "PATTERN", and you want to insert "BEFORE" in front of it, you can use, sans escaping
sed 's/(PATTERN)/BEFORE\1/g'
i.e.
sed 's/\(PATTERN\)/BEFORE\1/g'
You can also do this with awk, using -v to provide the pattern:
awk -v patt="pattern" '$0 ~ patt {gsub(patt, "\n"patt)}1' file
This checks if a line contains a given pattern. If so, it appends a new line to the beginning of it.
See a basic example:
$ cat file
hello
this is some pattern and we are going ahead
bye!
$ awk -v patt="pattern" '$0 ~ patt {gsub(patt, "\n"patt)}1' file
hello
this is some
pattern and we are going ahead
bye!
Note it will affect to all patterns in a line:
$ cat file
this pattern is some pattern and we are going ahead
$ awk -v patt="pattern" '$0 ~ patt {gsub(patt, "\n"patt)}1' d
this
pattern is some
pattern and we are going ahead
sed -e 's/regexp/\0\n/g'
\0 is the null, so your expression is replaced with null (nothing) and then...
\n is the new line
On some flavors of Unix doesn't work, but I think it's the solution to your problem.
echo "Hello" | sed -e 's/Hello/\0\ntmow/g'
Hello
tmow
This works in MAC for me
sed -i.bak -e 's/regex/xregex/g' input.txt sed -i.bak -e 's/qregex/\'$'\nregex/g' input.txt
Dono whether its perfect one...
After reading all the answers to this question, it still took me many attempts to get the correct syntax to the following example script:
#!/bin/bash
# script: add_domain
# using fixed values instead of command line parameters $1, $2
# to show typical variable values in this example
ipaddr="127.0.0.1"
domain="example.com"
# no need to escape $ipaddr and $domain values if we use separate quotes.
sudo sed -i '$a \\n'"$ipaddr www.$domain $domain" /etc/hosts
The script appends a newline \n followed by another line of text to the end of a file using a single sed command.
In vi on Red Hat, I was able to insert carriage returns using just the \r character. I believe this internally executes 'ex' instead of 'sed', but it's similar, and vi can be another way to do bulk edits such as code patches. For example. I am surrounding a search term with an if statement that insists on carriage returns after the braces:
:.,$s/\(my_function(.*)\)/if(!skip_option){\r\t\1\r\t}/
Note that I also had it insert some tabs to make things align better.
Just to add to the list of many ways to do this, here is a simple python alternative. You could of course use re.sub() if a regex were needed.
python -c 'print(open("./myfile.txt", "r").read().replace("String to match", "String to match\n"))' > myfile_lines.txt
sed 's/regexp/\'$'\n/g'
works as justified and detailed by mojuba in his answer .
However, this did not work:
sed 's/regexp/\\\n/g'
It added a new line, but at the end of the original line, a \n was added.