When VS2017 was used to create a stateful solution, producing the standard boilerplate code, the resulting two projects have two different MSBuild versions.
The application uses MSBuild version 1.5.0.
The service uses MSBuild version 1.6.0 (the current "latest").
If I run the solution this way, it runs fine on my local Service Fabric cluster.
But when after I use NuGet to update the application's MSBuild to 1.6.0 (so both application and server projects use the same), the following errors occur.
Severity Code Description Project File Line Suppression State
Error The OutputPath property is not set for project 'gt_strd5.sfproj'. Please check to make sure that you have specified a valid combination of Configuration and Platform for this project. Configuration='Debug' P follow a project-to-project reference to this project, this project has belatform='x64'. This error may also appear if some other project is trying toen unloaded or is not included in the solution, and the referencing project does not build using the same or an equivalent Configuration or Platform. gt_strd5 C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets 737
Severity Code Description Project File Line Suppression State
Error MSB4057 The target "CreateManifestResourceNames" does not exist in the project. gt_strd5 C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin\Microsoft.Common.CurrentVersion.targets 2630
I found that after the change, some references in the application's project file continued to reference MSBuild 1.5.0. In my case, the gt_strd5.sfproj file contained four references which needed to be updated from 1.5.0 to 1.6.0. See the snippets from the XML below.
Import Project="..\packages\Microsoft.VisualStudio.Azure.Fabric.**MSBuild.1.5.0**\build\Microsoft.VisualStudio.Azure.Fabric.Application.props" Condition="Exists('..\packages\Microsoft.VisualStudio.Azure.Fabric.**MSBuild.1.5.0**\build\Microsoft.VisualStudio.Azure.Fabric.Application.props')"
.....
Import Project="..\packages\Microsoft.VisualStudio.Azure.Fabric.**MSBuild.1.5.0**\build\Microsoft.VisualStudio.Azure.Fabric.Application.targets" Condition="Exists('..\packages\Microsoft.VisualStudio.Azure.Fabric.**MSBuild.1.5.0**\build\Microsoft.VisualStudio.Azure.Fabric.Application.targets')"
To verify this, I went back a couple times and was able to reproduce both the issue and this solution.
Hope it saves someone else some time.
Best Regards
I was getting this error into PCF control.
Run Developer Command Prompt VS2017/ VS2019
a) Remove white space from your folder like Test%20-%20PCFs (source control generated name) should be TestPCFs
b) Go to pcf project folder from cmd line & run msbuild /t:restore
b) Go to cds project folder from cmd line & run msbuild /t:restore
c) On cds project folder, run msbuild
d) For release deployment run msbuild /p:configuration=Release
For other types of projects
a) Remove white space from your folder name
b) run msbuild /t:restore
c) run msbuild
Related
I have Visual studio project solution which has multiple .csproj. Each .csproj has some reference libraries.The project settings are made in such a way the reference libraries are built first and then .csproj is built. This works as expected when i run it in visual studio IDE. But when i try to execute using msbuild i'm getting an error saying target doesn't exist. Gone through many posts related to this issue ,tried possible things.But didn't built.Looks like i might be doing something silly or missing something in the settings.
Also tried using devenv from commandline. With this option i dont see any error but at same time the project doesnt build.I dont see any message after execution of command.Im using visual studio 2015
Here is my project structure
Poject.sln
ProjectA
porjectB
projectC
Libraries
libA
libB
msbuild "project.sln" target:"D:\Projects\Source\Demo\ProjectA\ProjectA.csproj" /t:build
"/p:Configuration=Debug" "/p:platform=x86"
I see the below error
"D:\project.sln" (D:\Projects\Source\Demo\ProjectA\;build target) (1) ->
D:\project.sln.metaproj : error MSB4057: The target "D:\Projects\Source\Demo\ProjectA" does not exist in the project. [D:\project.sln]
Here is the command used using devenv
devenv.exe "project.sln" /build Debug /project `"D:\Projects\source\Demo\Applications\ProjectA\ProjectA.csproj" /projectconfig Debug
After executing the above its doesnt build and i dont see any error too.
error MSB4057: The target "D:\Projects\Source\Demo\ProjectA" does not
exist in the project.
The error indicates your path in command is not valid and project.sln can't recognize the path. So you actually meet one path-related issue. And you should pass the ProjectA to the targets argument instead of ProjectA.csproj! More details see tip3 in For MSBuild.
For MSBuild:
1.If you're only trying to build ProjectA and its reference libraries.
Navigate(cd) to path where ProjectA.csproj exists, and then use command msbuild ProjectA.csproj /t:build /p:Configuration=Debug /p:platform=x86
Also you can directly use command msbuild AbsolutePath\ProjectA.csproj /t:build /p:Configuration=Debug /p:platform=x86. It's not necessary to use " to cover the path and arguments.
(ProjectA.csproj file should have definitions about the reference to those two library projects, so msbuild ProjectA.csproj will build those two projects first. You don't need to specify the xx.sln in your command.)
2.If you're trying to build whole solution(all the projects):
msbuild project.sln /t:build /p:Configuration=xxx /p:platform=xxx
Navigate to solution folder when you run above command, or use absolutepath\project.sln with that command.
3.When you want to build specific projects(more than one) in solution:
Check How to: Build Specific Targets in Solutions By Using MSBuild.exe. Since you're only build ProjectA, you don't need to use this format. For example: Only when you need to build both ProjectA and ProjectB, but not build ProjectC... You can use command like:
msbuild xxx.sln /t:NotInSlnfolder:Build;NewFolder\InSolutionFolder:Build
Pay attention to the path when you use this format. Whether your project is in solution folder can affect the build result a lot ! And, the direct cause of your issue, this command's targets argument needs one ProjectName as input instead of ProjectName.csproj.
For Devenv command:
1.I always use VS2017 and VS2019,so I'm not certainly sure if VS2015's devenv related command has big difference from VS2017's or VS2019's. But according to details from this VS2017 document:
Commands that begin with devenv are handled by the devenv.com utility, which delivers output through standard system streams, such as stdout and stderr.
Alternatively, commands that begin with devenv.exe can use the same switches, but the devenv.com utility is bypassed. Using devenv.exe directly prevents output from appearing on the console.
I think that's why you don't see any message after execution of command. You should use devenv.com command to see the output in console. And it's by design that devenv.exe will prevents output from appearing on the console.
2.The following command builds the project CSharpWinApp, using the Debug project build configuration within MySolution.
devenv "%USERPROFILE%\source\repos\MySolution.sln" /build Debug /project "CSharpWinApp\CSharpWinApp.csproj" /projectconfig Debug
More details about devenv reference please check this document.
In addition:
1.Looks like you have one strange project structure. I checked your error message above and it seems your several projects(xx.csproj) are not under Solution(xx.sln) folder. Just a suggestion, the normal folder structure for VS2015 is always:
Solution folder
xx.sln
ProjectA folder
ProjectA.csproj
ProjectB folder
ProjectB.csproj
2.For most of the projects, build using msbuild is more powerful and convenient than build using devenv. So if you don't have special reason, I recommend using Msbuild, the build engine of VS.
Hope all above helps to resolve your issue and puzzle. Let me know if your issue persists:)
File "/Users/morel893/Desktop/env/lib/python3.7/site-packages/django/db/backends/utils.py", line 84, in _execute
return self.cursor.execute(sql, params)
django.db.utils.ProgrammingError: relation "projects_project" does not exist
LINE 1: ...ct"."technology", "projects_project"."image" FROM "projects_...
I am running the build command like this:
set MSBuildParams=/m:16 /target:Rebuild
/property:Configuration=""Release"";Platform=""x64"" msbuild
%MSBuildParams% C:\path\to\the\sln\Solution.sln
I'm using the following msbuild version:
Microsoft (R) Build Engine version 14.0.25420.1
Solution.sln contains 2 projects,
let's say Project1 and Project2.
Project1 is set as the startup project.
After I build the Solution.sln using this setup, I would like to
rebuild it, but this time using Project2 as the startup project.
Is there a way to do that, without changing the Solution.sln?
What would be the best practice to accomplish that?
You could use the specific command line to build/rebuild the specific project using MSbuild like the following case.
specify project file of a solution using msbuild
But we have to change certain files if you want to change the start up project without using the VS IDE, since the setting was stored into the ".SUO" file.
Actually there is no setting in ".SLN" file for startup project even if you don't want to change it,
In addition, the start up project was the running project of the solution, maybe you don't have to change it:
https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/b6347dce-8449-4cbb-a606-7b19407a1026/how-do-i-set-the-startup-project-in-the-sln-file?forum=vcgeneral
I'm trying to build my solution and package up the web app into a web deploy (.zip) package to be deployed.
I've added the Visual Studio Build step with the following MSBuild Arguments:
/p:DeployOnBuild=True /p:WebPublishMethod=Package /p:PackageAsSingleFile=true /p:PackageLocation="$(build.artifactstagingdirectory)\"
And I've set up the Copy and Publish Build Artifacts step to copy all .zip files to the drop folder.
The build completes successfully but nothing is copied to the drop folder because there are no .zip packages that get created.
So when I look on the TFS server, the only thing in the 'a' folder is an empty 'drop' folder. And in the 's' folder is the solution directory with a PrecompiledWeb folder in it. Not sure what that is but it doesn't look like the deployment package (and it's not a .zip).
Any ideas?
I have tried the same on VS2015 MVC web application using VSTS and TFS 2015.2.1 both. I had to do a slight change to the Build arguments in Visual Studio build. That is removing the trailing "\" in /p:PackageLocation="$(build.artifactstagingdirectory)\".
Here is the argument I passed to Visual studio build step
/p:DeployOnBuild=True /p:WebPublishMethod=Package /p:PackageAsSingleFile=true /p:PackageLocation="$(build.artifactstagingdirectory)"
Then I used Copy and Published Build Artifacts (Deprecated in VSTS you should use Copy task and Publish task instead of this task) as shown below
This gives me output as below.
First suggest you manually remote in the build agent and build the project through MSBuild command line with arguments to see if the project builds properly.
This will narrow down the issue is related to the environment on your build agent or your build definition.
You should directly use /p:PackageLocation=$(build.stagingDirectory
Besides since you have multiple assemblies that are referenced in the web app. Please also double check dependencies that are building in the correct order or referenced correctly.
Make sure the ASP.NET development workload of Visual Studio is installed.
If DeployOnBuild is having no effect, you may need to install the ASP.NET Development "workload" with the VS setup tool.
There are specific .targets files that, if they don't exist, cause these parameters to be silently ignored. Installing this adds those .targets and the parameters become active, allowing the .zip to be created.
For me (VS 2017) the relevant target file (or one of them, anyway) that was missing but is needed is:
C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\MSBuild\Microsoft\VisualStudio\v15.0\Web\Microsoft.Web.Publishing.targets
If it is missing, you'll need to install as above, and if it is there, then you have a different problem. ;)
I have a solution, which consists out of 2 projects: regular class library for .NET 4.5 + website (not web application) project.
When I build this solution with Visual Studio - all referenced assemblies from Nuget packages and local references are copied to bin folder of website project.
If I try to build solution with MsBuild - bin folder of website project does not receive any assemblies.
Website project is not selected to be built in VS configuration (which is reported by message in both cases)
Edit - here is additional explanation.
When I clone a project from git - bin folder of website contains only 4 assemblies already checked in:
If I will run msbuild command with /t:Build or /t:Rebuild and /p:Configuration=Release;Platform="Any CPU" - I'll receive just an output of postbuild event in my other project, included in solution:
However, if I execute build from VS (Ctrl + Shift + b) in Release/Debug config - bin have all required assemblies for running web application.
Edit 2: Link to example solution - https://github.com/akuryan/csharp-website-test
When one builds it with msbuild TestApp.sln /t:Rebuild /p:Configuration=Release;Platform="Any CPU" - this results in only Test.Core.* and LetsEncrypt.Umbraco.dll (initially checked in) found at ~\Test.Web\bin\ (where Test.Web is website project). If one builds TestApp.sln with VisualStudion 2015 (I suppose, 2013 and 2017 will be the same) - ~\Test.Web\bin\ gets whole amount of assemblies.
Different results with MsBuild and Visual Studio
That because the all dll.refresh file in bin folder alongside the binary file are ignored by .gitignore.
Since Web Site projects do not have any project file (.csproj) to put the assembly references, the *.dll.refresh files are used by MSBuild to understand the assembly references. The contents of the file is the relative path to the .dll via the packages folder for the solution. When you ignore all those .dll.refresh by .gitignore, MSBuild could not understand how to handle the dll files.
To test this, I created a website project, add a nuget package to it, then delete the dll files but keep the .dll.refresh files in the bin folder. Build the website project by MSBuild command line:
msbuild.exe TestWebsite.sln /t:Rebuild
After this command complete, the dll files are copy to the bin folder.
So build and package restore to work it looks like you need to keep the .dll.refresh files in the bin folder. You can remove the other binaries from your version control system.
Note: If you want to get those .dll.refresh back, you can use the command line in the Package Manager Console:
update-package -reinstall
Hope this helps.
I'm using Vs2010 and Wix 3.6.0917.0, for the record. I use the $(SolutionDir) property quite a bit in my .wixproj file, since I only ever build the installer as part of a solution build or as part of a team build, and never by itself. However, while building from the command line works just fine (both from cmd on the desktop and when building on build agents), when I attempt to reload the .wixproj file into the IDE, I get errors because all the $(SolutionDir) variables are resolving to the project directory, not the solution directory. Consider:
C:\workspace\projectCollection\teamProject\branch\solution.sln
C:\workspace\projectCollection\teamProject\branch\source\installer\installer.wixproj
and assume a shared custom targets file:
C:\workspace\projectCollection\teamProject\branch\build\shared.targets
which is referenced inside installer.wixproj with:
<Import Project="$(SolutionDir)build\shared.targets">
Command line builds work fine...
C:\workspace\projectCollection\teamProject\branch\> MSBuild /t:build /property:Platform=x64;Configuration=Debug solution.sln
0 Errors
0 Warnings
Build succeeded!
But load into vs2010 and you see...
The imported project
"C:\workspace\projectCollection\teamProject\branch\source\installer\build\shared.targets" was not found.
Confirm that the path in the <Import> declaration is correct, and that the file exists on disk.
C:\workspace\projectCollection\teamProject\branch\source\installer\installer.wixproj
You can see here that the resolved result of $(SolutionDir)build\shared.targets is getting the project directory and not the solution directory. What gives?
My guess would be that $(SolutionDir) resolves to nothing when the wixproj is being loaded into VS2010. In this case the imported file becomes "build\shared.targets". Since the path is relative it is assumed to be relative to the project directory. Using ".." or some other path could get you around the problem.
I verified this failed with WiX 3.5.2222.0 in VS2010. A C# console application project (csproj) worked as expected.
Have you filed a bug against WiX for this?
I looked at the WiX vs2010 addin code a little bit and the Solution properties are only created when doing a build and not when the project is loaded.