I am new using Arduino.
I have Arduino One using a Ethernet shield and I need to send some information from the Arduino to the my Azure IoT Hub all the examples are using Wi-Fi shield.
I was reading the docs from Azure-IoT-Arduino SDK for Arduino but I could not find useful information.
https://github.com/Azure/azure-iot-arduino
Someone know where I can find information about this problem?
Thank you!
Azure IoT HuB uses TLS to securely connect devices to the Azure Cloud.
The Arduino UNO is not capable of doing secure communication using TLS due to its low memory footprint.
To connect Arduino devices to the Azure cloud you need to look at their 32 bit ARM based offerings like
arduino mkr1000
arduino zero
There are Microsoft Azure IoT SDKs for these platforms.
Another option would be to use another device as a protocol gateway. An easy way to get started would be to use node-red on Raspberry Pi
Related
First of all hi to all as it is my first question on stack overflow.
Pardon me if you find alot of mistakes in my question asking format.
I am trying to make follwoing Project
https://www.hackster.io/wearemakers/get-me-there-bus-intelligent-transportation-system-bits-9a06c1
for my school project but as mentioned in project after receiving data from sensors on IOT Hub of Azure tables will be created automatically but there is no table created and even i don't know how to check data is received on IOT Hub or not
Here is pic of step where i have encountered problem.
You could use Azure IoT Toolkit for VS Code to check whether data is received in IoT Hub.
Right-click your device and select Start Monitoring D2C Message.
The monitored messages will be shown in OUTPUT > Azure IoT Toolkit view.
To stop monitoring, right-click the OUTPUT view and select Stop Monitoring D2C Message.
You could also check out the Wiki Page to see the more detailed usage.
If you could see message arrived in IoT Hub, then there should be the problem between IoT Hub and Azure Storage. Otherwise, it should be the problem of your Raspberry pi not sending message.
i don't know how to check data is received on IOT Hub
You can use Device Explorer to check if data is received by IoT Hub:
Ref:
"How to use Device Explorer for IoT Hub devices"
"Monitor device-to-cloud events"
I need to install the HPE Mobile Center Connector on my local pc without any server just for a trial with UFT. can anyone advice what should i give in the Mobile center IP Address? since server port is by default: 8080
If you want to test mobile with UFT you need to have a mobile center server installed.
The Mobile Center Connector is not used by UFT, it's just a way to connect mobile devices to the MC server without physically connecting the device to the server machine. You should think of the connector as a way to extend the MC server. UFT connects to the server and can see all devices connected to the server (either physically or via connector) so if you don't have a server machine the connector has no meaning.
You can install the MC sever on a virtual machine if this helps.
You can install MC all in one which includes server + connector. It's supported for both Windows & Linux.
There is a trial version so you can test it with UFT.
If you want to try out Mobile testing with UFT, there is a free resource that you can use:
https://marketplace.microfocus.com/appdelivery/content/uft-mobile-add-in-for-local-device
More info from Micro Focus marketplace:
"This “add-in” acts as a connector between UFT and the mobile devices connected directly to the UFT machine. In just a few steps, UFT users can start designing and running mobile app and web tests on one local mobile device at a time without purchasing an additional license. Whether you work in Retail, Telecom, Finance, or other adjacent industries, the UFT Mobile Add-in for Local Devices is a great fit for testers who need to:
Execute their omnichannel content strategy using the same script for desktop and mobile web content
Support mobile testing in organisations that do not have a lab management solution in place
Run mobile tests without needing a new tool for mobile only"
I took my laptop as a device to publish some data to the IoT Cloud Foundation, we are getting the state as connected and disconnected.(Fluctuating) But we are unable to see ant sort of data in the dashboard. We are trying to Publih some message or json data to the IOT Foundation Cloud but it is not working for me.
Can we do in this way or not. I already connected Raspberr Pi and BeagleBone Devices to the IoT Foumdation Cloud.
Please Help me on this.
New to SMSLib.
I checked some samples and docs but did not get any ref/poc wherein I can send SMS with following set-up.
I want to send SMS from PC which is connected to internet in office network, where I am using proxy settings to connect to internet.(Basically office PC used in LAN environment)
I am not sure how to set the Modem settings in this scenario.
What i want - want to test SMS functionality in office environment and would like to send SMS to android based mobile using SMSLib library.
I have done SMSLib set-up on my PC and have all the required jars/dlls placed at proper location. So no issues related with set-up. Set-up is on windows platform.
I have written sample POC by referring some blogs/SMSLib docs. But as mentioned in points 1 and 2 above, am not getting how to write the code.
Any help/pointers in this regard highly appreciated.
Thanks in advance,
picku
We are searching for USB connectivity software to connect with an Oracle database using Oracle Advanced Security Network Encryption algorithms.
We have a software package that requires a USB connection with handheld mobile devices to upload data from scanned activity. We are not able to connect via wireless, wireless telephony, or Bluetooth technology.
The software vendor provided a connection package developed by a third party vendor, that works on development databases, but not on production with network encryption activated. To date, neither the software company nor the third party vendor is able to provide a solution.
My question is: Does anyone know of software that can provide a USB connection between a mobile handheld device and an Oracle database with Network Encryption activated?
Any help will be deeply appreciated.