So I'm looking for a way for my shell to find the folder with the code behind the folder name that keeps changing, in the data/app/ folder, for example the folder "com.tencent.ig-yHGLSvh42dYO-GNMFS9WxA==". Which always changes only in the part after "com.tencent.ig-", the second "-" and "==". Full path "data/app/com.tencent.ig-yHGLSvh42dYO-GNMFS9WxA==/"
Code that can find the location of a folder so I can change the contents of that folder. If possible the code is contained in a variable so I can use it like so:
findfolder = (Code)
printf $findfolder
I use mkvpropedit to edit audio tracks in my movies and it works, MOSTLY.
I found out today that for some of my movies (in .mkv of course) it give me this error:
Error: Updating the 'Tracks' element failed. Reason: The file could not be opened for writing.
Possible reasons are: the file is not a Matroska file; the file is write-protected; the file is locked by another process; you do not have permission to access the file.
These files are in the same folder of the others that actually works, and the permissions are all the same.
I tried to remux one of this "corrupt movie" (the movies are perfectly fine to watch) and the edit works in that way. But since they're a lot, and also they're in the same folder with the "good ones", I'd rather to understand why it give me this error, instead of remux everything.
Check if the file (s) have the "read only" attribute checked. If so, you can go to the containing folder -> properties -> uncheck "read-only" (this is to apply to all files and subfolders, if not, you can do it per file). Then try to run the command.
Does anyone know how to display a local image in markdown? I don't want to set up a webserver for that.
I try the following in markdown, but it doesn't work:
I suspect the path is not correct. As mentioned by user7412219 ubuntu and windows deal with path differently. Try to put the image in the same folder as your Notebook and use:
On windows the desktop should be at: C:\Users\jzhang\Desktop
The following works with a relative path to an image into a subfolder next to the document:
Solution for Unix-like operating system.
STEP BY STEP :
Create a directory named like Images and put all the images that will be rendered by the Markdown.
For example, put example.png into Images.
To load example.png that was located under the Images directory before.
Note : Images directory must be located under the same directory of your markdown text file which has .md extension.
To add an image in markdown file the .md file and the image should be in the same directory. As in my case my .md file was in doc folder so i also moved the image into the same folder. After that write the following syntax in .md file
like 
This has worked for me.
The best solution is to provide a path relative to the folder where the md document is located.
Probably a browser is in trouble when it tries to resolve the absolute path of a local file. That can be solved by accessing the file trough a webserver, but even in that situation, the image path has to be right.
Having a folder at the same level of the document, containing all the images, is the cleanest and safest solution.
It will load on GitHub, local, local webserver.
images_folder/img.jpg < works
/images_folder/img.jpg < this will work on webserver's only (please read the note!)
Using the absolute path, the image will be accessible only with a url like this: http://hostname.doesntmatter/image_folder/img.jpg
if image has bracket it won't display
.png)
rename the image and remove brackets
Update:
if you have spaces in the file path, you should consider renaming it too or if you use JavaScript you can encode it using
encodeURIComponent(imagePath)
Also, always try to save images and files alike with lowercase, please develop that habit, just my personal view though
Adding a local image worked for me by like so: 
Without the file:// prefix it did not work (Win10, Notepad++ with MarkdownViewer++ addon)
Edit: I found out it also works with html tags, and that is way better:
<img src="file://IMG_20181123_115829.jpg" alt="alt text" width="200"/>
Edit2: In Atom editor it only works without the file:// prefix. What a mess.
Depending on your tool - you can also inject HTML into markdown.
<img src="./img/Isolated.png">
This assumes your folder structure is:
├── img
└── Isolated.jpg
├── README.md
Edited:
Working for me ( for local image )
tree
├── doc
└── jobsSystemSchema.jpg
├── README.md
markdown file README.md is at the same level as doc directory.
In your case ,your markdown file should be at the same level as the directory files.
Working for me (absolute url with raw path)
NOT working for me (url with blob path)
Just add the relative image file route from the markdown file
This worked for me in ubuntu:
Markdown file is in:
/home/gps/Documents/Markdown/
Image file is in:
/home/gps/Pictures/
To my knowledge, for VSCode on Linux, the local image can be normally displayed only when you put the image into the same folder as your .md post file.
i.e. only  or  will work.
Even the absolute path like also doesn't work.
In Jupyter Notebook Markdown, you can use
<img src="RelPathofFolder/File" style="width:800px;height:300px;">
Another possibility for not displayed local image is unintentional indent of the image reference - spaces before .
This makes it 'code block' instead of 'image inclusion'. Just remove the leading spaces.
You may find following the syntax similar to reference links in markdown handy, especially when you have a text with many displays of the same image:
![optional text description of the image][number]
[number]: URL
For example:
![][1]
![This is an optional description][2]
[1]: /home/jerzy/ComputerScience/Parole/Screenshot_2020-10-13_11-53-29.png
[2]: /home/jerzy/ComputerScience/Parole/Screenshot_2020-10-13_11-53-30.png
I've had problems with inserting images in R Markdown. If I do the entire URL: C:/Users/Me/Desktop/Project/images/image.png it tends to work. Otherwise, I have to put the markdown in either the same directory as the image or in an ancestor directory to it. It appears that the declared knitting directory is ignored when referencing images.
Either put the image in the same folder as the markdown file or use a relative path to the image.
just copy the image and then paste it, you will get the output
The basic syntax is . In my case, I used image name as Any\ Image\ of\ your\ choice.png in  instead of  and it was not working. So I would say make sure to check the image directory and also image name doesn't contain spaces if so use underscore(_) instead of space.
Faced issue while using markdown in Jupyter notebook in Ubuntu 18.04.
I got a solution:
a) Example Internet:
b) Example local Image:
TurboByte
How to (easily) get current file path in Sublime Text 3
I don't often use ST console (I used it only once to install package manager), but I suppose it could be good way to :
get current file path like some kind pwd command.
But it doesn't work.
Does anyone know an easy way to get current file path?
to clipboard : better not a strict objective in the answer
not necessary by ST command, maybe package?
Right click somewhere in the file (not on the title tab) --> Copy file path
If you don't want to use the mouse, you could set up a keyboard shortcut as explained here https://superuser.com/questions/636057/how-to-set-shortcut-for-copy-file-path-in-sublime-text-3
To easily copy the current file path, add the following to Key Bindings - User:
{ "keys": ["ctrl+alt+c"], "command": "copy_path" },
Source
Key Bindings - User can be opened via the command palette (command + p on OSX)
Easy to understand using image. On Right Click you will get this.
Transcribed code in image for convenience:
import sublime, sublime_plugin, os
class CopyFilenameCommand(sublime_plugin.TextCommand):
def run(self, edit):
if len(self.view.file_name()) > 0:
filename = os.path.split(self.view.file_name())[1]
sublime.set_clipboard(filename)
sublime.status_message("Copied file name: %s" % filename)
def is_enabled(self):
return self.view.file_name()... # can't see
Mac OS X - Sublime Text 3
Right click > Copy File Path
A lot of these answers involve touching the mouse. Here's how to do get the path without any mouse clicks using SideBarEnhancements
Install SideBarEnhancements using PackageControl.
Click super + shift + P to open the command palette
In the command palette begin typing path until you see File: Copy Path
Select File: Copy Path
Now the path to file you are working in is copied into your clipboard.
There is a Sublime Package which gives your current file location inside a status bar. I just cloned them directly to my /sublime-text-3/Packages folder.
git clone git#github.com:shagabutdinov/sublime-shell-status.git ShellStatus;
git clone git#github.com:shagabutdinov/sublime-status-message.git StatusMessage;
You have to check/read the description on GitHub. Even it is listed in package control it would not install properly for me. You can actually edit the shell output as you want. If you have the right skills with python/shell.
Looks like this (Material Theme)
If you're like me and always click on items in the sidebar just to realize that copying the path only works when clicking in the editor area, have a look at the SideBarEnhancements package. It has a huge bunch of options to copy file paths in a variety of different ways.
Installation is available via Package Control (despite the webpage only mentions installation via manual download).
Note: The package “sends basic, anonymous statistics”. The webpage explains how to opt out from that.
Go to this link. The code in the link is given by robertcollier4.
Create a file named CpoyFileName.py or whatever you like with .py extension.
Save the file in Sublime Text 3\Packages\User folder. Then paste the above given key bindings in your Preferences: Key Bindings file.
Now, you can use the specified key bindings to copy just filename or total (absolute) filepath.
Please note that the filename or filepath do contain file extension.
Fastest Solution ( No Packages Needed + Comprehensive ):
Folder Path:
Folder in "Sidebar"
Right Click
"Find In Folder"
"Where" field contains everything you need
File Path:
File in current "Tab"
Right Click
"Copy File Path"
I have six folders like this >> Images
and each folder contains some images. I know how to read images in matlab BUT my question is how I can traverse through these folders and read images in abc.m file (this file is shown in this image)
So basically you want to read images in different folders without putting all of the images into one folder and using imread()? Because you could just copy all of the images (and name them in a way that lets you know which folder they came from) into a your MATLAB working directory and then load them that way.
Use the cd command to change directories (like in *nix) and then load/read the images as you traverse through each folder. You might need absolute path names.
The easiest way is certainly a right clic on the forlder in matlab and "Add to Path" >> "Selected Folders and Subfolders"
Then you can just get images with imread without specifying the path.
if you know the path to the image containing directory, you can use dir on it to list all the files (and directories) in it. Filter the files with the image extension you want and voila, you have an array with all the images in the directory you specified:
dirname = 'images';
ext = '.jpg';
sDir= dir( fullfile(dirname ,['*' ext]) );;
sDir([sDir.isdir])=[]; % remove directories
% following is obsolete because wildcarded dir ^^
b=arrayfun(#(x) strcmpi(x.name(end-length(ext)+1:end),ext),sDir); % filter on extension
sFiles = sDir(b);
You probably want to prefix the name of each file with the directory before using:
sFileName(ii) = fullfile(dirname, sFiles(ii));
You can process this resulting files as you want. Loading all the files for example:
for ii=1:numel(sFiles)
data{i}=imread(sFiles(ii).name)
end
If you also want to recurse the subdirectories, I suggest you take a look at:
How to get all files under a specific directory in MATLAB?
or other solutions on the FEX:
http://www.mathworks.com/matlabcentral/fileexchange/8682-dirr-find-files-recursively-filtering-name-date-or-bytes
http://www.mathworks.com/matlabcentral/fileexchange/15505-recursive-dir
EDIT: added Amro's suggestion of wildcarding the dir call