I have a ubuntu docker. I install elasticsearch service it.
When i use the command "curl -X GET 'localhost:9200' ", it return me the version, the name, all right.
It means the elasticsearch is configured correct, but when i access on my browser out of docker , doesn't work.
I have already configured the network on elasticsearch.yml file in path:
/etc/elasticsearch/elasticsearch.yml
I don't know the reason.
When i start the docker i use the command:
docker run -it -p 9200:9200 ubuntu/elastic
Extra information: the elasticsearch is in ubuntu that it's a docker too. i start the ubuntu, and after that inside the ubuntu's container i start the elasticsearch service.
You should use the official ELS docker image instead and use the command in the documentation.
From ELS documentation :
The Docker image can be retrieved with the following command:
docker pull docker.elastic.co/elasticsearch/elasticsearch:5.4.1
[...]
Running Elasticsearch from the command lineedit
Development modeedit
Elasticsearch can be quickly started for development or testing use
with the following command:
docker run -p 9200:9200 -e "http.host=0.0.0.0" -e "transport.host=127.0.0.1"
docker.elastic.co/elasticsearch/elasticsearch:5.4.1
By default elasticsearch is listening at 127.0.0.1 so it won't accessible outside the container. In order to be accessible outside container you will have to launch it using:
docker run -p 9200:9200 -e "http.host=0.0.0.0" -e "transport.host=127.0.0.1" docker.elastic.co/elasticsearch/elasticsearch:5.4.1
This will make elasticsearch available on all IP addresses 0.0.0.0 then you will be able to access it. Detail can be found here.
Related
I've installed the Docker for Mac beta which allows you to use docker commands directly. I want to try to run rethinkdb through docker, so I've followed the instructions of the rethinkdb docker container docs and done the following:
docker run --name some-rethink -v "$PWD:/data" -d rethinkdb
This works, and I can see the container with docker ps and start shell with docker exec -it /bin/bash
However, I can't connect to the admin panel on my Mac directly with their suggestion
$BROWSER "http://$(docker inspect --format \
'{{ .NetworkSettings.IPAddress }}' some-rethink):8080"
This essentially amounts to google-chrome http://172.17.0.2:8080/, but this doesn't work. I asked around and was told
You can't use the docker private ip address space to access the ports
You have to forward them to the mac
However, I'm not sure how to do this as I don't have any port forwarding tools I'm familiar with such as ssh on the container itself. Using the suggested port forwarding command in the rethinkdb container docs ssh -fNTL ... but with localhost instead of remote does not work.
How can I connect to the rethinkdb admin panel through http with the docker beta on a Mac?
Try forwarding the container port using the -p flag in the docker run command, e.g.:
docker run -p 8080:8080 --name some-rethink -v "$PWD:/data" -d rethinkdb
and then it should be accessible on localhost,
google-chrome http://127.0.0.1:8080/
Relevant docker run docs: https://docs.docker.com/engine/reference/run/#/expose-incoming-ports
I have spring boot application which communicate with ElasticSearch 5.0.0 alpha 2.
My application successfully communicate with elastic and preform several queries.
When I try to dockerize my application, it fails to communicate with ElasticSearch, and I get the following error:
None of the configured nodes are available: [{#transport#-1}{127.0.0.1}{127.0.0.1:9300}]
I have spent a lot of time on the internet, but I have found problems when the ElasticSearch is dockerized, but in my case, the client is dockerized, and it is working fine without the docker.
The command I used to create the docker image is: docker build -t my-service .
The DockerFile is:
FROM java:8
VOLUME /tmp
ADD ./build/libs/myjarfile-2.0.0.jar app.jar
EXPOSE 8090
RUN sh -c 'touch /app.jar'
ENTRYPOINT ["java","-Djava.security.egd=file:/dev/./urandom","-jar","/app.jar"]
To execute the image i use: docker run --name myname -d -p 8090:8090 -t my-service
Can someone share his/her experience with this issue?
Thanks
Guy Hudara
The problem is that your elasticsearch is not available on your dockerized host. When you put something in a docker container it also gets isolated on a network layer and localhost is localhost of the docker container but not the host itself. Therefore if you have elasticsearch also in a docker container use container linking and environment variable injection or reference your host machines address of your main network interface – not loopback – to your app.
Option 1
assuming that elasticsearch exposes 9200 try to run the following
$ docker run -d --name=elasticsearch elasticsearch
$ docker run -d --name=my-app --link elasticsearch:elasticsearch -p 8090:8090 my-app
Then you can define elasticsearch address in your app using env variable ${ELASTICSEARCH_PORT_9200_TCP_ADDR}.
Option 2
assuming your host machine runs on 192.168.1.10 you can also do the following:
$ docker run -d -p 9200:9200 elasticsearch
$ docker run -d -p 8090:8090 my-app
note that the name for the easticsearch container is optional here but the exposing of elasticsearch port mandatory. In this case you'll have to configure your elasticsearch host in your app given address of 192.168.1.10.
I'm using Docker Terminal on Windows running a container from my nginx image and when I access the docker-machine IP on my browser I get "CONNECTION_REFUSED".
This is command that I used to run the container
docker run -it -d -v /home/user/html:/usr/share/nginx/html -p 80:80 myimage
Check if your container is running (docker ps)
Log in your container to see if there is any error log (docker exec -it container_name /bin/bash)
Make sure you are using correct IP address (docker-machine ip container_name)
It's very important to check logs with docker logs <container name>
After that, you'll see if connection refused is due to a
Address visibility problem.
NginX configuration problem.
Port 80 is already being used.
...
Hi i'm new to elasticsearch and docker so forgive me if this question is a bit basic.
I want to load up an elasticsearch container (using the official elasticsearch image on dockerhub) with a config file on my host machine
currently what I do is
docker run -d elasticsearch elasticsearch -Des.cluster.name="testcluster1" -Des.node.name="node1"
and so on.
is there a way to load the container using a confi file i.e the elasticsearch.yml file from my host machine?
host machine is running centos (not sure if relevant but thought i'd add it just incase)
Thank you
You can do research on ONBUILD in Dockerfile.
If one line is marked with ONBUILD, it will only be triggered when run the container.
$ cat Dockerfile
FROM elasticsearch
ONBUILD ADD elasticsearch.yml /SOME_PATH
ENTRYPOINT ["/docker-entrypoint.sh"]
CMD ["elasticsearch"]
Secondly, you can also mount a host folder when run the container.
docker run -d -v "$PWD/config":/usr/share/elasticsearch/config elasticsearch -Des.cluster.name="testcluster1" -Des.node.name="node1"
Refer:
Dockerfile Best Practices
I have built a docker image with the following Docker file.
# gunicorn-flask
FROM devdb/kibana
MAINTAINER John Doe <user.name#gmail.com>
ENV DEBIAN_FRONTEND noninteractive
RUN apt-get update
RUN apt-get install -y python python-pip python-virtualenv gunicorn
# Setup flask application
RUN mkdir -p /deploy/app
COPY gunicorn_config.py /deploy/gunicorn_config.py
COPY app /deploy/app
RUN pip install -r /deploy/app/requirements.txt
WORKDIR /deploy/app
EXPOSE 5000 5601 9200
# Start gunicorn
CMD ["/usr/bin/gunicorn", "--config", "/deploy/gunicorn_config.py", "listener:app"]
I am running the container from the image created from this Docker file as follows.
sudo docker run -p 5601:5601 -p 9200:9200 -p 5000:5000 -v /home/Workspace/xits/config/elasticsearch.yml:/opt/elasticsearch/config/elasticsearch.yml -v /home/Workspace/xits/config/kibana.yml:/opt/kibana/config/kibana.yml es-kibana-gunicorn:latest
The issue I am facing is that I cannot access Kibana port 5601 on my host machine. My browser page says ERR_CONNECTION_REFUSED
I am able to access port 5000 though.
I can't figure out why this is.Any help would be greatly appreciated.
The parent Dockerfile devdb/kibana is using a script to start kibana and elasticsearch when the docker container is started. See CMD ["/sbin/my_init"] and the script itself.
When in your own Dockerfile you use the CMD instruction, you override the one from the parents Dockerfiles.
Since your CMD only starts gunicorn, elasticsearch and kibana won't ever be started. That's why there is no response on their respective network ports.
The Docker image you inherits from inherits itself from phusion/baseimage which has its own way of making multiple processes run in Docker containers. I recommend you follow the instructions on their README file to learn how to add your gunicorn to the list of services to start. Basically you would have to define a script named run and add it to your docker image within the /etc/service/<service name>/ directory.
In your Dockerfile, add:
COPY run /etc/service/gunicorn/
and the run script should be something similar to:
#!/bin/bash
cd /deploy/app
/usr/bin/gunicorn --config /deploy/gunicorn_config.py listener:app