I am trying to compile the bitcoin-core on my Mac and I want to use QT to develop the project also. Here is the instruction on GitHub:
https://github.com/bitcoin/bitcoin/blob/0.14/doc/build-osx.md
And I have set up my QT:
$ qmake --version
QMake version 3.0
Using Qt version 5.5.1 in /usr/local/Cellar/qt#5.5/5.5.1_1/lib
then when i run
./configure --with-gui
it throws the error below:
checking for Qt5Core Qt5Gui Qt5Network Qt5Widgets... no
checking for QtCore QtGui QtNetwork... no
configure: error: Qt dependencies not found
and i can't run ./src/qt in QT. It throws these error:
make[1]: *** No rule to make target `bitcoin_qt'. Stop.
make: *** [all] Error 2
11:24:14: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project bitocin (kit: Desktop)
When executing step "Make"
My English's bad, hope you could understand. Thank you for help!
Related
Running mac osx 10.14.6 and have previously successfully built 3.0.10 and 3.0.11. Trying to build VLC 3.0.12 & 3.0.14 from source downloaded from here: http://www.videolan.org/vlc/download-sources.html
and using recommended build from here: https://wiki.videolan.org/MacOSCompile/ AND using the recommended:
../extras/package/macosx/build.sh -c
Build runs for about 20 minutes and then stops here (snip of output):
CCLD libprefetch_plugin.la
CCLD libhds_plugin.la
CCLD librecord_plugin.la
ld: library not found for -lzstd
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make[4]: *** [libarchive_plugin.la] Error 1
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
mysystem:build xx$
What am I missing or doing wrong?
Note: in previous builds I could find a cmake/Utilities/cmzstd/lib directory in vlc-3.0.x/extras/tools that had various zstd files however it is not there in either 3.0.12 or 3.0.14 - only a cmake-enable-ALPN-support-on-macOS-109.14.patch file.
Where do I find zstd? Thanks.
Seems the issue is related to how macOS and packagers (homebrew, etc.) load components. macOS provides a compiled version of libarchive but no headers, so you are unable in trying to compile. You will either need to pass the location of your libarchive respository with headers via your build script or set an environment variable telling the compiler or linker where to look for them. Perhaps someone more familiar with your VLC package can weigh in.
I am trying to create a new XCode project. I already configured opencv, but now i need both opencv and pcl libraries. I tried to make a makefile.txt, but i got the following error:
make[2]: *** No rule to make target `/Library/Developer/CommandLineTools/SDKs/MacOSX11.0.sdk/usr/lib/libz.tbd', needed by `SurfaceDetection'. Stop.
make[1]: *** [CMakeFiles/SurfaceDetection.dir/all] Error 2
make: *** [all] Error 2
this is my cmakefile:
cmake_minimum_required(VERSION 3.2.1)
project (SurfaceDetection)
find_package(PCL REQUIRED COMPONENTS)
find_package(OpenCV REQUIRED)
include_directories(${PCL_INCLUDE_DIRS} ${OpenCV_INCLUDE_DIRS})
link_directories(${PCL_LIBRARY_DIRS})
add_definitions(${PCL_DEFINITIONS})
add_executable (SurfaceDetection main.cpp)
target_link_libraries (SurfaceDetection ${PCL_LIBRARIES} ${OpenCV_LIBS})
I found out what caused this error. You can check out what system version is your macos, once updated to macos 11.1, you have to reinstall command line tools and redirect the sdks of the project.
I am trying to install Elemental. I cloned it from the GitHub directory. Made a build directory and ran cmake command in it. But when I do a make, it shows the following error message:
[ 73%] Linking CUDA device code
CMakeFiles/EntrywiseMap.dir/cmake_device_link.o
nvcc fatal : Unknown option 'pthread'
tests/CMakeFiles/EntrywiseMap.dir/build.make:99: recipe for target
'tests/CMakeFiles/EntrywiseMap.dir/cmake_device_link.o' failed
make[2]: *** [tests/CMakeFiles/EntrywiseMap.dir/cmake_device_link.o]
Error 1
CMakeFiles/Makefile2:1506: recipe for target
'tests/CMakeFiles/EntrywiseMap.dir/all' failed
make[1]: *** [tests/CMakeFiles/EntrywiseMap.dir/all] Error 2
Makefile:140: recipe for target 'all' failed
make: *** [all] Error 2
I am using ubuntu 18, with cuda 10 and cmake version 3.13.4
What's the version of Cmake? This issue seems to be on CMake 3.12 and fixed on CMake 3.13
For me moving to the newer version of CMake 3.14.0 helped get past the issue.
Trying to compile ITK software using Cmake on a Linux system. Build fails after 39% complete with following error:
"make[2]: * [Wrapping/Generators/GccXML/llvm-prefix/src/llvm-stamp/llvm-configure] Error 1
make[1]: * [Wrapping/Generators/GccXML/CMakeFiles/llvm.dir/all] Error 2
make: *** [all] Error 2"
Help?
Also mentions that gcc needs to be version 4.7 or higher, but system has 4.8 installed.
I'm trying to install cutecom on OSX Mavericks but I'm getting some erros.
Here are the steps that I followed.
install qt through brew
brew install qt
update path on .bashprofile
export PATH=/usr/local/Cellar/qt/4.8.6/bin:$PATH
extract files of cutecom
compile source code of cutecom
$ mkdir build
$ cd build
$ cmake ..
$ make
And the output of make is:
[ 20%] Generating ui_cutecommdlg.h
/Users/kc/Downloads/cutecom-0.22.0/cutecommdlg.ui: Warning: The form file has external pixmaps or qPixmapFromMimeSource() set as a pixmap function. This requires Qt 3 support, which is disabled. The resulting code will not compile.
[ 40%] Generating moc_qcppdialogimpl.cxx Scanning dependencies of target cutecom
[ 60%] Building CXX object CMakeFiles/cutecom.dir/main.cpp.o
In file included from /Users/kc/Downloads/cutecom-0.22.0/main.cpp:21:
In file included from /Users/kc/Downloads/cutecom-0.22.0/qcppdialogimpl.h:22:
/Users/kc/Downloads/cutecom-0.22.0/build/ui_cutecommdlg.h:12:10: fatal error:
'Qt3Support/Q3MimeSourceFactory' file not found
#include <Qt3Support/Q3MimeSourceFactory>
^
1 error generated.
make[2]: *** [CMakeFiles/cutecom.dir/main.cpp.o] Error 1
make[1]: *** [CMakeFiles/cutecom.dir/all] Error 2
make: *** [all] Error 2
Any suggestions ?
Thank you very much for your time.
Kostas.
The Qt package you have is missing Qt3Support (on purpose). This component is necessarily for some Qt4 software that still uses deprecated features dating back to Qt3.
Based on the documentation I've been able to find online, you should be able to reinstall Qt4 with the extras you need using a command like this:
brew install --with-qt3support qt