I am getting the following error trying to read from a socket. I'm doing a readInt() on that InputStream, and I am getting this error. Perusing the documentation this suggests that the client part of the connection closed the connection. In this scenario, I am the server.
I have access to the client log files and it is not closing the connection, and in fact its log files suggest I am closing the connection. So does anybody have an idea why this is happening? What else to check for? Does this arise when there are local resources that are perhaps reaching thresholds?
I do note that I have the following line:
socket.setSoTimeout(10000);
just prior to the readInt(). There is a reason for this (long story), but just curious, are there circumstances under which this might lead to the indicated error? I have the server running in my IDE, and I happened to leave my IDE stuck on a breakpoint, and I then noticed the exact same errors begin appearing in my own logs in my IDE.
Anyway, just mentioning it, hopefully not a red herring. :-(
There are several possible causes.
The other end has deliberately reset the connection, in a way which I will not document here. It is rare, and generally incorrect, for application software to do this, but it is not unknown for commercial software.
More commonly, it is caused by writing to a connection that the other end has already closed normally. In other words an application protocol error.
It can also be caused by closing a socket when there is unread data in the socket receive buffer.
In Windows, 'software caused connection abort', which is not the same as 'connection reset', is caused by network problems sending from your end. There's a Microsoft knowledge base article about this.
Connection reset simply means that a TCP RST was received. This happens when your peer receives data that it can't process, and there can be various reasons for that.
The simplest is when you close the socket, and then write more data on the output stream. By closing the socket, you told your peer that you are done talking, and it can forget about your connection. When you send more data on that stream anyway, the peer rejects it with an RST to let you know it isn't listening.
In other cases, an intervening firewall or even the remote host itself might "forget" about your TCP connection. This could happen if you don't send any data for a long time (2 hours is a common time-out), or because the peer was rebooted and lost its information about active connections. Sending data on one of these defunct connections will cause a RST too.
Update in response to additional information:
Take a close look at your handling of the SocketTimeoutException. This exception is raised if the configured timeout is exceeded while blocked on a socket operation. The state of the socket itself is not changed when this exception is thrown, but if your exception handler closes the socket, and then tries to write to it, you'll be in a connection reset condition. setSoTimeout() is meant to give you a clean way to break out of a read() operation that might otherwise block forever, without doing dirty things like closing the socket from another thread.
Whenever I have had odd issues like this, I usually sit down with a tool like WireShark and look at the raw data being passed back and forth. You might be surprised where things are being disconnected, and you are only being notified when you try and read.
You should inspect full trace very carefully,
I've a server socket application and fixed a java.net.SocketException: Connection reset case.
In my case it happens while reading from a clientSocket Socket object which is closed its connection because of some reason. (Network lost,firewall or application crash or intended close)
Actually I was re-establishing connection when I got an error while reading from this Socket object.
Socket clientSocket = ServerSocket.accept();
is = new BufferedReader(new InputStreamReader(clientSocket.getInputStream()));
int readed = is.read(); // WHERE ERROR STARTS !!!
The interesting thing is for my JAVA Socket if a client connects to my ServerSocket and close its connection without sending anything is.read() is being called repeatedly.It seems because of being in an infinite while loop for reading from this socket you try to read from a closed connection.
If you use something like below for read operation;
while(true)
{
Receive();
}
Then you get a stackTrace something like below on and on
java.net.SocketException: Socket is closed
at java.net.ServerSocket.accept(ServerSocket.java:494)
What I did is just closing ServerSocket and renewing my connection and waiting for further incoming client connections
String Receive() throws Exception
{
try {
int readed = is.read();
....
}catch(Exception e)
{
tryReConnect();
logit(); //etc
}
//...
}
This reestablises my connection for unknown client socket losts
private void tryReConnect()
{
try
{
ServerSocket.close();
//empty my old lost connection and let it get by garbage col. immediately
clientSocket=null;
System.gc();
//Wait a new client Socket connection and address this to my local variable
clientSocket= ServerSocket.accept(); // Waiting for another Connection
System.out.println("Connection established...");
}catch (Exception e) {
String message="ReConnect not successful "+e.getMessage();
logit();//etc...
}
}
I couldn't find another way because as you see from below image you can't understand whether connection is lost or not without a try and catch ,because everything seems right . I got this snapshot while I was getting Connection reset continuously.
Embarrassing to say it, but when I had this problem, it was simply a mistake that I was closing the connection before I read all the data. In cases with small strings being returned, it worked, but that was probably due to the whole response was buffered, before I closed it.
In cases of longer amounts of text being returned, the exception was thrown, since more then a buffer was coming back.
You might check for this oversight. Remember opening a URL is like a file, be sure to close it (release the connection) once it has been fully read.
I had the same error. I found the solution for problem now. The problem was client program was finishing before server read the streams.
I had this problem with a SOA system written in Java. I was running both the client and the server on different physical machines and they worked fine for a long time, then those nasty connection resets appeared in the client log and there wasn't anything strange in the server log. Restarting both client and server didn't solve the problem. Finally we discovered that the heap on the server side was rather full so we increased the memory available to the JVM: problem solved! Note that there was no OutOfMemoryError in the log: memory was just scarce, not exhausted.
Check your server's Java version. Happened to me because my Weblogic 10.3.6 was on JDK 1.7.0_75 which was on TLSv1. The rest endpoint I was trying to consume was shutting down anything below TLSv1.2.
By default Weblogic was trying to negotiate the strongest shared protocol. See details here: Issues with setting https.protocols System Property for HTTPS connections.
I added verbose SSL logging to identify the supported TLS. This indicated TLSv1 was being used for the handshake.
-Djavax.net.debug=ssl:handshake:verbose:keymanager:trustmanager -Djava.security.debug=access:stack
I resolved this by pushing the feature out to our JDK8-compatible product, JDK8 defaults to TLSv1.2. For those restricted to JDK7, I also successfully tested a workaround for Java 7 by upgrading to TLSv1.2. I used this answer: How to enable TLS 1.2 in Java 7
I also had this problem with a Java program trying to send a command on a server via SSH. The problem was with the machine executing the Java code. It didn't have the permission to connect to the remote server. The write() method was doing alright, but the read() method was throwing a java.net.SocketException: Connection reset. I fixed this problem with adding the client SSH key to the remote server known keys.
In my case was DNS problem .
I put in host file the resolved IP and everything works fine.
Of course it is not a permanent solution put this give me time to fix the DNS problem.
In my experience, I often encounter the following situations;
If you work in a corporate company, contact the network and security team. Because in requests made to external services, it may be necessary to give permission for the relevant endpoint.
Another issue is that the SSL certificate may have expired on the server where your application is running.
I've seen this problem. In my case, there was an error caused by reusing the same ClientRequest object in an specific Java class. That project was using Jboss Resteasy.
Initially only one method was using/invoking the object ClientRequest (placed as global variable in the class) to do a request in an specific URL.
After that, another method was created to get data with another URL, reusing the same ClientRequest object, though.
The solution: in the same class was created another ClientRequest object and exclusively to not be reused.
In my case it was problem with TSL version. I was using Retrofit with OkHttp client and after update ALB on server side I should have to delete my config with connectionSpecs:
OkHttpClient.Builder clientBuilder = new OkHttpClient.Builder();
List<ConnectionSpec> connectionSpecs = new ArrayList<>();
connectionSpecs.add(ConnectionSpec.COMPATIBLE_TLS);
// clientBuilder.connectionSpecs(connectionSpecs);
So try to remove or add this config to use different TSL configurations.
I used to get the 'NotifyUtil::java.net.SocketException: Connection reset at java.net.SocketInputStream.read(SocketInputStream.java:...' message in the Apache Console of my Netbeans7.4 setup.
I tried many solutions to get away from it, what worked for me is enabling the TLS on Tomcat.
Here is how to:
Create a keystore file to store the server's private key and
self-signed certificate by executing the following command:
Windows:
"%JAVA_HOME%\bin\keytool" -genkey -alias tomcat -keyalg RSA
Unix:
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA
and specify a password value of "changeit".
As per https://tomcat.apache.org/tomcat-7.0-doc/ssl-howto.html
(This will create a .keystore file in your localuser dir)
Then edit server.xml (uncomment and edit relevant lines) file (%CATALINA_HOME%apache-tomcat-7.0.41.0_base\conf\server.xml) to enable SSL and TLS protocol:
<Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true"
maxThreads="150" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" keystorePass="changeit" />
I hope this helps
Im running a Laravel 6 app on AWC EC-2 instance and have it configured to send mail via Gmail SMTP. Has worked perfect for nearly 2 years. Approx 1-1.5 days ago, the email function started throwing the Connection timed out error.
I tried switching ports, and changing TLS to SSL and no change.
Ive read dozens of threads with the same problem - but no help. Most suggest changing from driver smtp to sendmail - but that breaks all my email-send code.
I tried to telnet smtp.gmail.com 587 from the command line - and get Host is unreachable. There has been NO change to the code, config or setup recently.
My thoughts right now, are either:
AWS have blocked my smtp port,
Google has blocked my IP from sending mail,
My server MAY have reached a limit of some sort (but thought it will un-suspend in 24hrs if the case)
I am not sure HOW or WHERE to find that answer, or if there is another possible problem/solution here. I only have Basic support with AWS - so cant raise a standard tech support q.
Any suggestions would be greatly appreciated.
With thanks - James (Image of error and env below).
I'm using Google's simplehttp2server go-lang program to run some tests and have encountered a recurring error. Upon executing the TLS handshake I receive the following error:
2019/12/12 12:42:55 http: TLS handshake error from 127.0.0.1:36202: read tcp 127.0.0.1:5000->127.0.0.1:36202: use of closed network connection
I have updated my go version to 1.13.5 from 1.12.9 and tried two browsers (brave + chrome) plus curl and receive the same error code each time. It happens over HTTP/2 and HTTP/1.1. I have seem other answers from across the web but am still running into this error (ex1, ex2, ex3, ex4).
Very much appreciate any feedback, advice, or admonishment. Anything to help the migraine this problem is giving me!
edit: screenshot from my curl and running of simplehttp2server
example image from curl and simplehttp2server
This error happens when you have two websockets connected to a singular address using the same port from the same machine. One of the websockets will be able to connect fine but the other wont be able to make the connection.
I was making the same mistake and when I removed the duplicate connection the error resolved.
I am having a strange issue. I am working on sms module for one of the client.
So, I am using Kannel to connect to SMSC server. At the very first attempt means after restarting both client and server applications . I am able to connect to SMSC with one active connections but, after some time server is having multiple connections for My IP although i am having only one connection at that time . Because , of this we are not able to receive MOs properly there is a huge MO drop. To overcome this problem we has to restart both client and server applications frequently. Which is not a proper solution So, server requested me to resolve our end as they have multiple partners and they are not facing this issue.
Background :
Before , they have provided us a ip(public ip) and port to connect to SMSC .Asked our IP(public ip) to make whitlist at their end. And they have provided VPN settings after VPN configured we are successfully connected to SMSC. They have masked our IP at their end to treat as local IP.
So, Please help me to resolve this multiple connections error as i am new to kannel and SMPP.
I had the same exact issue with another SMPP client app, it was NowSMS, and also, it was very strange as my NowSMS is connected to +15 SPs since 7 years ago, and I had no such issue with anyone of them. But, NowSMS told me that there's an understandable issue at SP's side and after a some investigations, we noticed that the SP deals with the first established connection only and ignores the other connections, although, I had one single connection only and all previous connections were closed from my side before establishing a new one.
So, please discuss the same with your SP, otherwise, share the full config here as you may have something incorrect.
BTW, did you try getting a live TCP trace from your side and SP's side at the same time?
I'm using beanstalkd to offload some work to other machines. The setup is a bit unusual, the server is on the internet (public ip) but the consumers are behind adsl lines on some peoples homes. So there is a linux server as client going out through a dynamic ip and connecting to the server to get a job. It's all PHP and I'm using pheanstalk library.
Everything runs smoothly for some time, but then the adsl changes the IP (every 24h hours the provider forces a disconnect-reconnect) the client just hangs, never to go out of "reserve".
I thought that putting a timeout on the reserve would help it, but it didn't. As it seems, the client issues a command and blocks, it never checks the timeout. It just issues a reserve-with-timeout (instead of a simple reserve) and it is the servers responsibility to return a TIME_OUT as the timeout occurs. The problem is, the connection is broken (but the TCP/IP doesn't know about that yet until any of the sides try to talk to the other side) and if the client blocked reading, it will never return.
The library seems to have support for some kind of timeouts locally (for example when trying to connect to server), but it does not seem to contemplate this scenario.
How could I detect the stale connection and force a reconnect? Is there some kind of keepalive on the protocol (and on the pheanstalk itself)?
Thanks!
You could try to close each connection right after the request is answered and reopen a new connection each time.
There is no close() function but you deleting the Pheanstaly Object with unset($pheanstalk) will close it.
This explanation is quite helpful:
Pheanstalk (PHP client for beanstalk) - how do connections work?
I haven't tried it yet, but I came up with the idea of connecting to the beanstalk server through an SSH tunnel. We can enable the ServerAliveCountMax and ServerAliveInterval options on the tunnel, so that a network or server failure will cause the tunnel to close. This should then cause the pheanstalk client to report an error.