since the last few days I am having a lot of issues when starting R-Studio 1.0.143. It often crashes at start up with "unfortunately R-Studio has stopped working" error followed by JavaScript Alert 127.0.0.0.
I want to check the root cause by looking at Diagnostics available but not sure what I am looking at. Anyone how can point to how to improve R-Studio reliability? Just un-installed and installed again with nil help.
The only feasible solution was to revert back to Version 0.99.903. Nil problems since.
Related
I wrote a program about a month ago, and it worked fine. I haven't touched it since than, until today.
All of a sudden, I get the warning when opening Pycharm: "PyCharm has failed to load the environment from '/bin/zsh'. Integration with tools that rely on environment variables may work incorrectly." I couldn't find a good explanation and solution to this warning, without leaning out of my comfort zone of altering files on my computer.
When running the program I got the error message "Process finished with exit code 139 (interrupted by signal 11: SIGSEGV)". I have read that this error is related to a memory problem or, that a file needs to be closed.
I have cleaned the memory of my mac so far I know how to and all files are closed. The program reads from one file, but this is only one line, which has worked before and I don´t see how this could cause the error. Otherwise, I did write few other scripts in the same project over the last month, but that shouldn't be a cause of a memory issue, right?
Restarting Pycharm and my computer didn´t change anything.
The only other thing I can think of is, that I have updated my mac to Monterey version 12.2.1.
Could that be the cause for this behaviour? Did anyone else have a similar experience after this update?
And is it possible for the error message and Pycharms warning to be related?
I am thankful for any tip, that may help me understand this behaviour.
I was able to fix this issue through the following steps:
Updating PyCharm to the latest version
Within PyCharm going to File -> Invalidate Caches -> Checking all boxes -> Clicking "Invalidate and Restart"
(Previous attempts to Invalidate Caches with only the default boxes checked did not work for me, but checking all the boxes fixed the issue.)
Not a programming problem per se, but rather a programming environment problem that I have been unable to find a solution to.
The problem relates to Adobe's Extendscript Toolkit (both 3.5 and 4), but so far I haven't been able to solve the problem, so here I am...
The error I get has appeared more or less over night. I didn't experience this problem yesterday, nor this morning. But exactly WHAT has happened is beyond me. I have removed preferences, I have uninstalled, reinstalled, created a new user, restored old preferences from Time Machine and I'm now pretty much lost for options.
Basically, nothing works in ESTK anymore. Just opening ESTK and entering alert('Hello') won't work. Neither will $.writeln(). Everything running from within ESTK seems to give the same error;
Cannot execute script in target engine 'main'
With details:
Cannot execute script in target engine 'main'!
(#1116) Can't start debug session.
Below is a screenshot taken from the new user I created to test, same problem.
The "funny" thing is that all the scripts (InDesign CS5, still hanging on to it for reasons) still work perfectly in the applications' script panels. So there is nothing wrong with the scripts (heck, they haven't changed one bit, and still refuses to run in ESTK).
As mentioned, I've tried installing the ESTK CC (version 4) as well, but the very same problem occurs there. Which leads me to think the problem lies somewhere else, but I do not know where, and why.
So, if anyone can shed any light on this issue, at all, I would be very happy. Debugging is basically the only thing ESTK is good for in my book, but now that even that functionality is gone, I don't know how to efficiently debug the scripts which is kind of hampering the workflow.
For reference, I'm running InDesign CS5 (from the old Creative Suite) on a 2008 Mac Pro with 10.11.6 (El Capitan) installed. Well aware that it's pretty out of date, but that is beside the point here.
In the above mentioned forum, Adobe has published a stable workaround!You just have to correct a setting inside the estk application:
Open the file(Mac): “/Applications/Adobe ExtendScript Toolkit CC/ExtendScript Toolkit.app/Contents/SharedSupport/Required/cdic/11BTBackend.jsx”
Search for the value: 604800000 (line reads bt.timeout = 604800000)
Replace that value with 604800 and save
Quit ExtendScript Toolkit and relaunch.
I can confirm that it works.
From the adobe Forum :
"we have found a first workaround: just change your date to any date before 20-nov-2018"
https://forums.adobe.com/message/10761440#10761440
Seems like a date issue :(
I just published a quick update about this on the Adobe Tech Blog.
For the time being, if you dismiss the dialog, you can still run your script via ESTK and step through code as usual.
Alternatively, if you really want to avoid the dialogs, and you don’t mind setting your clock back, you can sidestep the issue by setting your system clock back to November 19, 2018 or before. On most systems, changing the system time can have unintended side effects, so this isn’t recommended unless you’re really certain about it.
I've had an issue that started yesterday with R Studio. When I install a package, even a small one, it fills the screen with an ever increasing progress line. The installation never finishes. The installation does finish in base R but the progress line still keeps growing. I'm running OSX Yosemite, R version 3.2.2, RStudio Version 0.99.893 (this also happens with the previous version of RStudio as well). Any ideas on why this may have started occurring? I teach a lot and use R, so I can pinpoint the change to yesterday morning, without any software changes to that point in previous weeks.
I'm on windows 7 x64. Using C++ in Visual Studio 2008 and 2010.
When I run any own application with VS after, aprox, 15 seconds the application is forced to exit. No messages, no Exceptions, no nothing. It doesn't matter how simple it is the application.
After a couple of weeks reviewing and commenting my code, I tried by reinstalling my S.O. and programs, thinking in some driver update or something similar. Whatever it was should solve my problem. That didn't solve the problem either.
You can see an example in
https://twitter.com/#!/nachovall/status/176996407780188160/photo/1/large
Note that it hasn't empty the buffer!! Just crazy.
I'm thinking in some whatchdog problem. I mean some, windows 7 issue which causes a given application to exit after some seconds.
The worst thing is that I have no idea about how to search this in Google. 'Silent crash'? It's not crashing, just exiting.
Well, if anyone knows what the problem is... you know.
By the way, I did a whole hardware analysis looking for some CPU or Memory problem. Nothing found.
Even more. I run the debug. I set a breakpoint in the first line of code. The application is doing nothing. Just waiting me to step over in the debugger. After 15 seconds, the application ends. Cool ha?
Ok, all night awake but finally found.
It was the antivirus program. Avast version 7.0.1407. When I disable it, everything get sense again.
It's been 2 weeks. 2 large and exhausting weeks. Anyone who's using this antivirus, please be aware.
How can I find what's hanging all new installations on a Windows box?
While testing an installation script on Windows (XP Pro, if it matters) I've run into a situation wherein any and all attempts to install anything on the system hang waiting on who knows what. When the system is restarted, all queued up attempts at installation then go through their exit paths with pop-ups that report the installation is being aborted due to system shutdown having been requested. Of course, reboots do not cure the problem. The system otherwise runs fine.
So... How can I determine what part of the OS I've wedged? (Something in the registry, I suppose, but I'm a real greenhorn when it comes to Windows.) Most likely, something from a preceding install attempt went awry and is now blocking even though I saw no errors reported. Once I figure this out, I want to put in a check for this sort of thing, possibly at both ends of my install scripts, if that seems reasonable.
Thanks for your input.
UPDATE:
Unfortunately for me, rebuilding from scratch to get to the point the system's in now is about 9 hours. I'd like to unwedge it from where it is now rather than reload (again). Procmon seems great but I haven't got SP2 installed, only SP1! -frown- So, other ideas are welcome.
I assume you've tried logging the install to see where things go wrong?
Try rolling back to before things went wrong using "System Restore", if that doesn't solve it and the MSI log files show nothing useful then I'd take the plunge and reload before wasting any more time on it.
That said, if you're developing installers then taking an image of this PC in it's crappy state could be a worthwhile exercise. Some point in the future when you have more time to debug you can try and figure out what the problem is.
P.S. I'm assuming you're asking this question from the point of view of someone developing an installer and not as a tech-support question... otherwise this question should probably be closed as not-programming-related ;)
Try using Procmon to figure out where the installer is having problems, if you set a filter it will report all file and registry activity for that process.