How do I add a line break while editing a field via CLI?
im editissue --field=comment="first line\nsecond line" ISSUE_NUMBER just saves the whole string in one line with a "\n"
The comment field is a multiline field and it is possible to insert a line break in GUI.
OS is Windows 7, integrity version is 10.6
I think it has more to do with the shell rather than the im utility itself. ANSI-C Quoting appears to work on Git Bash/Windows:
im editissue --field=FieldName=$'test\ntest' 123456
The $ causes the \n character in ''-delimited text to be interpolated - see this question for more details.
Related
I have a centos server. I cloned a GitHub repository. And I have .txt file in that repository which contains 1 line. For some reason it does that:
[root#0-0-0-0 Some]# cat some.txt
some text[root#0-0-0-0 Some]#
And also while read i; do echo "$i"; done < some.txt don't see that line. What could cause that? And how to avoid it. If I edit it with vim adding a new line and then deleting that new line (so it still contains only one line) it starts to work properly.
The text file has no newline character at the end of it. Some programs will treat it as a valid text file whose last line doesn't happen to end in a newline. Others (apparently including bash's built-in read command, at least by default) will treat it as invalid, and perhaps ignore the last line (which isn't considered a "line" because it's not marked as one).
vim's default behavior is to quietly add a newline to the end of a file if you modify and save it.
You can add a newline to a file that lacks one by editing it with vim (or another editor that behaves similarly), or by adding it from the shell:
echo '' >> some.txt
In general, it's a good idea to ensure that text files end in a newline character in the first place, at least if they're intended to be used on UNIX-like systems.
Situation: Using a shell script (bash/ksh), there is a message that should be shown in the console log, and subsequently sent via email.
Problem: There are newline characters in the message.
Example below:
ErrMsg="File names must be unique. Please correct and rerun.
Duplicate names are listed below:
File 1.txt
File 1.txt
File 2.txt
File 2.txt
File 2.txt"
echo "${ErrMsg}"
# OK. After showing the message in the console log, send an email
Question: How can these newline characters be translated into HTML line breaks for the email?
Constraint: We must use HTML email. Downstream processes (such as Microsoft Outlook) are too inconsistent for anything else to be of use. Simple text email is usually a good choice, but off the table for this situation.
To be clear, the newlines do not need to be completely removed, but HTML line breaks must be inserted wherever there is a newline character.
This question is being asked because I have already attempted to use several commands, such as sed, tr, and awk with varying degrees of success.
TL;DR: The following snippet will do the job:
ErrMsg=`echo "$ErrMsg"|awk 1 ORS='<br/>'`
Just make sure there are double quotes around the variable when using echo.
This turned out to be a tricky situation. Some notes of explanation are below.
Using sed
Turns out, sed reads through input line by line, which makes finding and replacing those newlines somewhat outside the norm. There were several clever tricks that appeared to work, but I felt they were far too complicated to apply appropriately to this rather simple situation.
Using tr
According to this answer the tr command should work. Unfortunately, this only translates character by character. The two character strings are not the same length, and I am limited to translating the newline into a space or other single character.
For the following:
ErrMsg="Line 1
Line 2
"
ErrMsg=`echo $ErrMsg| tr '\n' 'BREAK'`
# You might expect:
# "Line 1BREAKLine 2BREAK"
# But instead you get:
# "Line 1BLine 2B"
echo "${ErrMsg}"
Using awk
Using awk according to this answer initially appeared to work, but due to some other circumstances with echo there was a subtle problem. The solution is noted in this forum.
You must have double-quotes around your variable, or echo will strip out all newlines.(Of course, awk will receive the characters with a newline at the end, because that's what echo does after it echos stuff.)
This snippet is good: (line breaks in the middle are preserved and replaced correctly)
ErrMsg=`echo "$ErrMsg"|awk 1 ORS='<br/>'`
This snipped is bad: (newlines converted to spaces by echo, one line break at end)
ErrMsg=`echo $ErrMsg|awk 1 ORS='<br/>'`
You can wrap your message in HTML using <pre>, something like
<pre>
${ErrMsg}
and more.
</pre>
This is killing me. I have a config file, "myconfig.cfg", with the following content:
SOME_VAR=2
echo "I LOVE THIS"
Then I have a script that I'm trying to run, that sources the config file in order to use the settings in there as variables. I can print them out fine, but when I try to put one into a numeric variable for use in something like a "seq " command, I get this weird "invalid arithmetic operator" error.
Here's the script:
#!/bin/bash
source ./myconfig.cfg
echo "SOME_VAR=${SOME_VAR}"
let someVarNum=${SOME_VAR}
echo "someVarNum=${someVarNum}"
And here's the output:
I LOVE THIS
SOME_VAR=2
")syntax error: invalid arithmetic operator (error token is "
someVarNum=
I've tried countless things that theoretically shouldn't make a difference, and, surprise, they don't. I simply can't figure it out. If I simply take the line "SOME_VAR=2" and put it directly into the script, everything's fine. I'm guessing I'll have to read in the config file line by line, split the strings by "=", and find+create the variables I want to use manually.
The error is precisely as indicated in a comment by #TomFenech. The first line (and possibly all the lines) in myconfig.cfg is terminated with a Windows CR-LF line ending. Bash considers CR to be an ordinary character (not whitespace), so it will set SOME_VAR to the two character string 2CR. (CR is the character with hex code 0x0D. You could see that if you display the file with a hex-dumper: hd myconfig.cfg.)
The let command performs arithmetic on numbers. It also considers the CR to be an ordinary character, but it is neither a digit nor an operator so it complains. Unfortunately, it does not make any attempt to sanitize the display of the character in the error message, so the carriage return is displayed between the two " symbols. Consequently, the end of the error message overwrites the beginning.
Don't create Unix files with a Windows text editor. Or use a utility like dos2unix to fix them once you copy them to the Unix machine.
I am dealing with some multilingual data(English and Arabic) in a json file with a weird character i am not able to parse. I am not sure what the character is. I tried getting the ASCII value via vim and this is what i got
"38 0x26"
This is the status line in vim i used to get the value (http://vim.wikia.com/wiki/Showing_the_ASCII_value_of_the_current_character).
:set statusline=%<%f%h%m%r%=%b\ 0x%B\ \ %l,%c%V\ %P
This is how the character looks in vim -
I tried 'sed' and '.gsub' to replace this character unsuccessfully.
Is there a way where i can replace this character(preferably with .gsub ruby) with '&' or something else?
Thanks
try with something like
sed 's/[[:alpnum:][:space:]\[\]{}()\.\*\\\/_(AllAsciiVariationYouWant)/&/g;t
s/./?/g' YourFile
where (AllAsciiVariationYouWant) is all character that you want to keep as is (without the surrounding "()" )
JSON is encoded in UTF-8 (Unicode). If you're seeing funky-looking characters in your file, it's probably because your editor is not treating Unicode characters properly. That could be caused by the use of a terminal emulator that doesn't support Unicode; an incorrect $LANG setting; vim not being able to correctly determine the encoding of the file; and likely other reasons.
What terminal program are you using? What's your $LANG environment variable set to (echo $LANG)? If you're certain your terminal supports Unicode, try:
LANG=en_US.utf-8 vim your_file_here.json
(The above example assumes that U.S. English is appropriate for the file, which it may not be.)
As for replacing characters in the file, vim's substitution command can be used:
:%s/old text/new text/g
The above command will run the substitute command on all lines in the file (%), replacing every instance of "old text" with "new text". (The g at the end tells vim to replace every instance on a line, not just the first it finds.)
I have a rather tricky request...
We use a special application which is connected to a oracle database. For control reasons the application uses special characters which are defined by the application and saved in a long field of the database.
My task is to query the long field periodically and check for changes. To do that, I write the content by using a bash script in a file and compare the old and the new file with md5sum.
When there's a difference, I want to send the old file via mail. The problem is, that the old file contains these special characters and I don't know how to replace them with for example a string which describes them.
I tried to replace them on the basis of their ASCII code, but this didn't work. I've also tried to replace them by their appearance in the file. (They look like this: ^P ) This didn't work neither.
When viewing the file by text editor like nano the characters are visible like described above. But when using cat on the file, the content is only displayed until the first appearance of such a control character.
As far as I know there is know possibility to replace them while querying from the database because of the fact that the content is in a LONG field.
I hope you can help me.
Thank you in advance.
Marco
^P is the Control-P character, which is decimal 16 or hexadecimal 0x10, also known as the Data Link Escape (DLE) character in ASCII.
To replace all occurrences of 0x10 in a file with another string we can use our friend gsed:
gsed "s/\x10/Data Link Escape/g" yourfile.txt
This should replace all occurrences of characters containing the hex value 0x10 with the text string "Data Link Escape". You'll probably want to use a different string - this is just an example.
Depending on the system you're using you may be able to use the standard sed command if your version of sed recognizes the \xNN single-character escape codes. If there are multiple hex characters you need to replace you may want to create a file containing your sed commands, one for each hexadecmial character you need to replace, and tell sed or gsed to use the commands in the file - consult the sed or gsed man pages for how to do this.
Share and enjoy.
You can use xxd to change the string to its hex representation, then use xxd -r to convert back.
Or, you can use uuencode and uudecode.
One option is to run the file through cat -v. This replaces nonprinting characters with visible representations (using the ^ notation for control characters):
$ echo $'\x10\x12\x13\x14\x16' | cat -v
^P^R^S^T^V