I launch an centos AMI I created, and try to add user data as a file which looks like this:
#!/bin/bash
mkdir /home/centos/testing
cd testing
wget https://validlink
So simply, on launch, the user data creates a folder called testing and downloads this validURL which I will not put as it links to my data - however it is valid and accessible.
When I launch the instance, the folder testing is created successfully, however there is no file inside the directory.
When I ssh into the instance, and run the wget command as a sudo, the file is downloaded successfully inside the testing folder.
Why does the file not get downloaded on the ec2 launch through user data?
You have no way of knowing the current working directory when you execute the cd command. So specify full path:
cd /home/centos/testing
Try this:
#!/bin/bash
mkdir /home/centos/testing
cd /home/centos/testing
wget https://validlink
Run it using the root user.
Try this instead:
#!/bin/bash
sudo su
yum -y install wget
mkdir /home/centos/testing
cd /home/centos/testing
wget https://validlink
#!/bin/bash
printf "Content-type: text/html\n\n"
sudo convert /usr/lib/cgi-bin/images/* /usr/lib/cgi-bin/images.pdf
sudo ocrmypdf /usr/lib/cgi-bin/images.pdf /usr/lib/cgi-bin/pdf/images_ocr.pdf
printf "done"
above script is in cgi-bin folder with 755 permission
in browser http://localhost/cgi-bin/script.sh
script runs and only prints but no sudo cmd is executed plz help
These lines should be
sudo convert ~/usr/lib/cgi-bin/images/* ~/usr/lib/cgi-bin/images.pdf
sudo ocrmypdf ~/usr/lib/cgi-bin/images.pdf ~/usr/lib/cgi-bin/pdf/images_ocr.pdf
Without the ~ it's a relative path to the folder in which the script is executed.
If you already are in cgi-bin and won't change location :
sudo convert images/* images.pdf
sudo ocrmypdf images.pdf pdf/images_ocr.pdf
so you're not dependent on your root's folder structure and only on your project's
I was trying the below program,
This is a simple script, to cd into a folder
#! /bin/bash
cd /root/
But this below command , doesnt get into the folder
EDITED
#!/bin/bash
alias ex="cd /fs/fm"
alias ex1="source setenv"
alias ex2="cd /fs/fm/tests"
alias ex3="runtest"
To get into /root/ you should make sure that you have permissions. It's accessible if you're running as root itself but if you're running as a normal user you should consider becoming root first. One way is to use sudo:
sudo bash script.sh
And again, make sure your script is in UNIX format. Certainly you can't change to /root/\r.
sed -i 's|\r||' script.sh
dos2unix script.sh
This will never work The script you're running is a separate process, when it finishes you get back to the original environment (cwd, enviroment variables, etc...).
Create an alias:
alias r="cd /root"
or execute the script within your shell:
. myscript
Note: . is a synonym for source.
I have searched on how to run a script file on Mac but nothing works for me.
Every time I tried sudo script-name the terminal responds with
-bash: /Users/macuser/Desktop/tesseract-3.01: is a directory
The file I want to run is called start and it's located in tesseract-3.01 directory on the desktop.
simply do
/Users/macuser/Desktop/tesseract-3.01/start
or if it's actually called start.sh
/Users/macuser/Desktop/tesseract-3.01/start.sh
you might also want to do
chmod +x /Users/macuser/Desktop/tesseract-3.01/start.sh
to change the script to be executable before you run the script
sudo /Users/macuser/Desktop/tesseract-3.01/start
You have to indicate the script name, but it looks like you were only specifying the directory.
You could also cd to the directory and then run it like so:
cd /Users/macuser/Desktop/tesseract-3.01
sudo ./start
Try
sudo ./Users/macuser/Desktop/tesseract-3.01/start.sh
or
cd /Users/macuser/Desktop/tesseract-3.01
then
sudo ./start.sh
I have a shell script which I want to run without using the "sh" or "bash" commands. For example:
Instead of: sh script.sh
I want to use: script.sh
How can I do this?
P.S. (i) I don't use shell script much and I tried reading about aliases, but I did not understand how to use them.
(ii) I also read about linking the script with another file in the PATH variables. I am using my university server and I don't have permissions to create a file in those locations.
Add a "shebang" at the top of your file:
#!/bin/bash
And make your file executable (chmod +x script.sh).
Finally, modify your path to add the directory where your script is located:
export PATH=$PATH:/appropriate/directory
(typically, you want $HOME/bin for storing your own scripts)
These are the prerequisites of directly using the script name:
Add the shebang line (#!/bin/bash) at the very top.
Use chmod u+x scriptname to make the script executable (where scriptname is the name of your script).
Place the script under /usr/local/bin folder.
Note: I suggest placing it under /usr/local/bin because most likely that path will be already added to your PATH variable.
Run the script using just its name, scriptname.
If you don't have access to /usr/local/bin then do the following:
Create a folder in your home directory and call it bin.
Do ls -lA on your home directory, to identify the start-up script your shell is using. It should be either .profile or .bashrc.
Once you have identified the start up script, add the following line:
PATH="$PATH:$HOME/bin"
Once added, source your start-up script or log out and log back in.
To source, put . followed by a space and then your start-up script name, e.g. . .profile or . .bashrc
Run the script using just its name, scriptname.
Just make sure it is executable, using chmod +x. By default, the current directory is not on your PATH, so you will need to execute it as ./script.sh - or otherwise reference it by a qualified path. Alternatively, if you truly need just script.sh, you would need to add it to your PATH. (You may not have access to modify the system path, but you can almost certainly modify the PATH of your own current environment.) This also assumes that your script starts with something like #!/bin/sh.
You could also still use an alias, which is not really related to shell scripting but just the shell, and is simple as:
alias script.sh='sh script.sh'
Which would allow you to use just simply script.sh (literally - this won't work for any other *.sh file) instead of sh script.sh.
In this example the file will be called myShell
First of all we will need to make this file we can just start off by typing the following:
sudo nano myShell
Notice we didn't put the .sh extension?
That's because when we run it from the terminal we will only need to type myShell in order to run our command!
Now, in nano the top line MUST be #!/bin/bash then you may leave a new line before continuing.
For demonstration I will add a basic Hello World! response
So, I type the following:
echo Hello World!
After that my example should look like this:
#!/bin/bash
echo Hello World!
Now save the file and then run this command:
chmod +x myShell
Now we have made the file executable we can move it to /usr/bin/ by using the following command:
sudo cp myShell /usr/bin/
Congrats! Our command is now done! In the terminal we can type myShell and it should say Hello World!
You have to enable the executable bit for the program.
chmod +x script.sh
Then you can use ./script.sh
You can add the folder to the PATH in your .bashrc file (located in your home directory).
Add this line to the end of the file:
export PATH=$PATH:/your/folder/here
You can type sudo install (name of script) /usr/local/bin/(what you want to type to execute said script)
ex: sudo install quickcommit.sh /usr/local/bin/quickcommit
enter password
now can run without .sh and in any directory
Add . (current directory) to your PATH variable.
You can do this by editing your .profile file.
put following line in your .profile file
PATH=$PATH:.
Just make sure to add Shebang (#!/bin/bash) line at the starting of your script and make the script executable(using chmod +x <File Name>).
Here is my backup script that will give you the idea and the automation:
Server: Ubuntu 16.04
PHP: 7.0
Apache2, Mysql etc...
# Make Shell Backup Script - Bash Backup Script
nano /home/user/bash/backupscript.sh
#!/bin/bash
# Backup All Start
mkdir /home/user/backup/$(date +"%Y-%m-%d")
sudo zip -ry /home/user/backup/$(date +"%Y-%m-%d")/etc_rest.zip /etc -x "*apache2*" -x "*php*" -x "*mysql*"
sudo zip -ry /home/user/backup/$(date +"%Y-%m-%d")/etc_apache2.zip /etc/apache2
sudo zip -ry /home/user/backup/$(date +"%Y-%m-%d")/etc_php.zip /etc/php
sudo zip -ry /home/user/backup/$(date +"%Y-%m-%d")/etc_mysql.zip /etc/mysql
sudo zip -ry /home/user/backup/$(date +"%Y-%m-%d")/var_www_rest.zip /var/www -x "*html*"
sudo zip -ry /home/user/backup/$(date +"%Y-%m-%d")/var_www_html.zip /var/www/html
sudo zip -ry /home/user/backup/$(date +"%Y-%m-%d")/home_user.zip /home/user -x "*backup*"
# Backup All End
echo "Backup Completed Successfully!"
echo "Location: /home/user/backup/$(date +"%Y-%m-%d")"
chmod +x /home/user/bash/backupscript.sh
sudo ln -s /home/user/bash/backupscript.sh /usr/bin/backupscript
change /home/user to your user directory and type: backupscript anywhere on terminal to run the script! (assuming that /usr/bin is in your path)
Enter "#!/bin/sh" before script.
Then save it as script.sh for example.
copy it to $HOME/bin or $HOME/usr/bin
The directory can be different on different linux distros but they end with 'bin' and are in home directory
cd $HOME/bin or $HOME/usr/bin
Type chmod 700 script.sh
And you can run it just by typing run.sh on terminal.
If it not work, try chmod +x run.sh instead of chmod 700 run.sh
Make any file as executable
Let's say you have an executable file called migrate_linux_amd64 and you want to run this file as a command like "migrate"
First test the executable file from the file location:
[oracle#localhost]$ ./migrate.linux-amd64
Usage: migrate OPTIONS COMMAND [arg...]
migrate [ -version | -help ]
Options:
-source Location of the migrations (driver://url)
-path Shorthand for -source=file://path
-database Run migrations against this database (driver://url)
-prefetch N Number of migrations to load in advance before executing (default 10)
-lock-timeout N Allow N seconds to acquire database lock (default 15)
-verbose Print verbose logging
-version Print version
-help Print usage
Commands:
goto V Migrate to version V
up [N] Apply all or N up migrations
down [N] Apply all or N down migrations
drop Drop everyting inside database
force V Set version V but don't run migration (ignores dirty state)
version Print current migration version
Make sure you have execute privileges on the file
-rwxr-xr-x 1 oracle oinstall 7473971 May 18 2017 migrate.linux-amd64
if not, run chmod +x migrate.linux-amd64
Then copy your file to /usr/local/bin. This directory is owned by root, use sudo or switch to root and perform the following operation
sudo cp migrate.linux-amd64 /usr/local/bin
sudo chown oracle:oracle /user/local/bin/migrate.linux.amd64
Then create a symbolic link like below
sudo ln /usr/local/bin/migrate.linux.amd64 /usr/local/bin/migrate
sudo chown oracle:oracle /usr/local/bin/migrate
Finally add /usr/local/bin to your path or user profile
export PATH = $PATH:/usr/local/bin
Then run the command as "migrate"
[oracle#localhost]$ migrate
Usage: migrate OPTIONS COMMAND [arg...]
migrate [ -version | -help ]
Options:
-source Location of the migrations (driver://url)
-path Shorthand for -source=file://path
-database Run migrations against this database (driver://url)
-prefetch N Number of migrations to load in advance before executing (default 10)
-lock-timeout N Allow N seconds to acquire database lock (default 15)
-verbose Print verbose logging
-version Print version
-help Print usage
Commands:
goto V Migrate to version V
up [N] Apply all or N up migrations
down [N] Apply all or N down migrations
drop Drop everyting inside database
force V Set version V but don't run migration (ignores dirty state)
version Print current migration version
Make the script file as executable by using file's properties
Create alias for the executable in ~/.bashrc. alias <alias namme> = <full script file path>'
refresh the user session to apply it. source ~/.bashrc
Just to add to what everyone suggested. Even with those solutions, the problem will persist if the user wants to execute the script as sudo
example:
chmod a+x /tmp/myscript.sh
sudo ln -s /tmp/myscript.sh /usr/local/bin/myscript
typing myscript would work but typing sudo myscript would return command not found.
As sudo you would have to still type sudo sh myscript or sudo bash myscript.
I can't think of a solution around this.
Just:
/path/to/file/my_script.sh