In SQL there are aggregation operators, like AVG, SUM, COUNT. Why doesn't it have an operator for multiplication? "MUL" or something.
I was wondering, does it exist for Oracle, MSSQL, MySQL ? If not is there a workaround that would give this behaviour?
By MUL do you mean progressive multiplication of values?
Even with 100 rows of some small size (say 10s), your MUL(column) is going to overflow any data type! With such a high probability of mis/ab-use, and very limited scope for use, it does not need to be a SQL Standard. As others have shown there are mathematical ways of working it out, just as there are many many ways to do tricky calculations in SQL just using standard (and common-use) methods.
Sample data:
Column
1
2
4
8
COUNT : 4 items (1 for each non-null)
SUM : 1 + 2 + 4 + 8 = 15
AVG : 3.75 (SUM/COUNT)
MUL : 1 x 2 x 4 x 8 ? ( =64 )
For completeness, the Oracle, MSSQL, MySQL core implementations *
Oracle : EXP(SUM(LN(column))) or POWER(N,SUM(LOG(column, N)))
MSSQL : EXP(SUM(LOG(column))) or POWER(N,SUM(LOG(column)/LOG(N)))
MySQL : EXP(SUM(LOG(column))) or POW(N,SUM(LOG(N,column)))
Care when using EXP/LOG in SQL Server, watch the return type http://msdn.microsoft.com/en-us/library/ms187592.aspx
The POWER form allows for larger numbers (using bases larger than Euler's number), and in cases where the result grows too large to turn it back using POWER, you can return just the logarithmic value and calculate the actual number outside of the SQL query
* LOG(0) and LOG(-ve) are undefined. The below shows only how to handle this in SQL Server. Equivalents can be found for the other SQL flavours, using the same concept
create table MUL(data int)
insert MUL select 1 yourColumn union all
select 2 union all
select 4 union all
select 8 union all
select -2 union all
select 0
select CASE WHEN MIN(abs(data)) = 0 then 0 ELSE
EXP(SUM(Log(abs(nullif(data,0))))) -- the base mathematics
* round(0.5-count(nullif(sign(sign(data)+0.5),1))%2,0) -- pairs up negatives
END
from MUL
Ingredients:
taking the abs() of data, if the min is 0, multiplying by whatever else is futile, the result is 0
When data is 0, NULLIF converts it to null. The abs(), log() both return null, causing it to be precluded from sum()
If data is not 0, abs allows us to multiple a negative number using the LOG method - we will keep track of the negativity elsewhere
Working out the final sign
sign(data) returns 1 for >0, 0 for 0 and -1 for <0.
We add another 0.5 and take the sign() again, so we have now classified 0 and 1 both as 1, and only -1 as -1.
again use NULLIF to remove from COUNT() the 1's, since we only need to count up the negatives.
% 2 against the count() of negative numbers returns either
--> 1 if there is an odd number of negative numbers
--> 0 if there is an even number of negative numbers
more mathematical tricks: we take 1 or 0 off 0.5, so that the above becomes
--> (0.5-1=-0.5=>round to -1) if there is an odd number of negative numbers
--> (0.5-0= 0.5=>round to 1) if there is an even number of negative numbers
we multiple this final 1/-1 against the SUM-PRODUCT value for the real result
No, but you can use Mathematics :)
if yourColumn is always bigger than zero:
select EXP(SUM(LOG(yourColumn))) As ColumnProduct from yourTable
I see an Oracle answer is still missing, so here it is:
SQL> with yourTable as
2 ( select 1 yourColumn from dual union all
3 select 2 from dual union all
4 select 4 from dual union all
5 select 8 from dual
6 )
7 select EXP(SUM(LN(yourColumn))) As ColumnProduct from yourTable
8 /
COLUMNPRODUCT
-------------
64
1 row selected.
Regards,
Rob.
With PostgreSQL, you can create your own aggregate functions, see http://www.postgresql.org/docs/8.2/interactive/sql-createaggregate.html
To create an aggregate function on MySQL, you'll need to build an .so (linux) or .dll (windows) file. An example is shown here: http://www.codeproject.com/KB/database/mygroupconcat.aspx
I'm not sure about mssql and oracle, but i bet they have options to create custom aggregates as well.
You'll break any datatype fairly quickly as numbers mount up.
Using LOG/EXP is tricky because of numbers <= 0 that will fail when using LOG. I wrote a solution in this question that deals with this
Using CTE in MS SQL:
CREATE TABLE Foo(Id int, Val int)
INSERT INTO Foo VALUES(1, 2), (2, 3), (3, 4), (4, 5), (5, 6)
;WITH cte AS
(
SELECT Id, Val AS Multiply, row_number() over (order by Id) as rn
FROM Foo
WHERE Id=1
UNION ALL
SELECT ff.Id, cte.multiply*ff.Val as multiply, ff.rn FROM
(SELECT f.Id, f.Val, (row_number() over (order by f.Id)) as rn
FROM Foo f) ff
INNER JOIN cte
ON ff.rn -1= cte.rn
)
SELECT * FROM cte
Not sure about Oracle or sql-server, but in MySQL you can just use * like you normally would.
mysql> select count(id), count(id)*10 from tablename;
+-----------+--------------+
| count(id) | count(id)*10 |
+-----------+--------------+
| 961 | 9610 |
+-----------+--------------+
1 row in set (0.00 sec)
Related
I have a query that gets contract_types 1 to 10. This query is being used in an SSRS report to filter out a larger dataset. I am using -1 for nulls and -2 for all.
I would like to know how we would allow multiple values - does oracle concatenate the inputs together so '1,2,3' would be passed in? Say we get select -1,0,1 in SSRS, how could we alter the bottom query to return values?
My query to get ContractTypes:
SELECT
ContractType,
CASE WHEN ContractType = -2 THEN 'All'
WHEN ContractType = -1 THEN'Null'
ELSE to_Char(ContractType)
END AS DisplayFigure
FROM ContractTypes
which returns
ContractType DisplayFig
-1 Null
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
This currently is only returning single values or all, not muliple values:
SELECT *
FROM Employee
WHERE NVL(CONTRACT_TYPE, -1) = :contract_type or :contract_type = -2
I'm assuming we want to do something like:
WHERE NVL(CONTRACT_TYPE, -1) IN (:contract_type)
But this doesn't seem to work.
Data in Employee
Name ContractType
Bob 1
Sue 0
Bill Null
Joe 2
In my report, I want to be able to select contract_type as -1(null),0,1 using the 'allow muliple values' checkbox. At the moment, I can only select either 'all' using my -2 value, or single contract types.
My input would be: contract type = -1,1,2
My output would be Bill, Bob, Joe.
This is how I'm executing my code
I use SSRS with Oracle a lot so I see where you're coming from. Thankfully, they work pretty well together.
First make sure the parameter is set to allow multiple values. This adds a Select All option to your dropdown so you don't have to worry about adding a special case for "All". You'll want to make sure the dataset for the parameter has a row with -1 as the Value and a friendly description for the Label.
Next, the WHERE clause would be just as you mentioned:
WHERE NVL(CONTRACT_TYPE, -1) IN (:contract_type)
SSRS automatically populates the values. There is no XML or string manipulation needed. Keep in mind that this will not work with single-value parameters.
If for some reason this still doesn't work as expected in your environment, there is another workaround you can use which is more universal and works even with ODBC connections.
In the dataset parameter properties, use an expression like this to concatenate the values into a single, comma-separated string:
="," + Join(Parameters!Parameter.Value, ",") + ","
Then use an expression like this in your WHERE clause:
where :parameter like '%,' + Column + ',%'
Obviously, this is less efficient because it most likely won't be using an index, but it works.
I don't know SSRS, but - if I understood you correctly, you'll have to split that comma-separated values list into rows. Something like in this example:
SQL> select *
2 from dept
3 where deptno in (select regexp_substr('&&contract_type', '[^,]+', 1, level)
4 from dual
5 connect by level <= regexp_count('&&contract_type', ',') + 1
6 );
Enter value for contract_type: 10,20,40
DEPTNO DNAME LOC
---------- -------------------- --------------------
20 RESEARCH DALLAS
10 ACCOUNTING NEW YORK
40 OPERATIONS BOSTON
SQL>
Applied to your code:
select *
from employee
where nvl(contract_type, -1) in (select regexp_substr(:contract_type, '[^,]+', 1, level)
from dual
connect by level <= regexp_substr(:contract_type, ',') + 1
)
If you have the comma separated list of numbers and then if you like to split it then, the below seems simple and easy to maintain.
select to_number(column_value) from xmltable(:val);
Inputs: 1,2,3,4
Output:
I guess I understood your problem. If I am correct the below should solve your problem:
with inputs(Name, ContractType) as
(
select 'Bob', 1 from dual union all
select 'Sue', 0 from dual union all
select 'Bill', Null from dual union all
select 'Joe', 2 from dual
)
select *
from inputs
where decode(:ContractType,'-2',-2,nvl(ContractType,-1)) in (select to_number(column_value) from xmltable(:ContractType))
Inputs: -1,1,2
Output:
Inputs: -2
Output:
I have a column named voucher_number. The data in this column looks like
1, 2
I want a query (in oracle and linq as well) to return 0,3,4,5,6,7,8,9,10
Note: i am taking range (0 to 10 )as a parameter parameter from screen(aspx page)
You can use MINUS operator as following:
Select voucher_num from
(
(Select level - 1 as voucher_num from dual
Connect by level <= 11)
Minus
(Select voucher_number from your_table)
)
Order by voucher_num;
Cheers!!
Is there a possibility to add blank rows in a group of data rows dynamically ? I have the below query which fetches data in multiple rows. I want to separate, say add blank row after each 5 rows.
The query :
select php.ref_dcp_key, sum(php.group_booking), count(php.group_booking), 0
from gx_pnr_history ph, gx_pnr_his_prof php
where ph.gmpnr_loc_key = php.gmpnr_loc_key
group by php.ref_dcp_key order by php.ref_dcp_key;
#SandeepGowada, you'd have to create an outer structure for the rows and put in the 6th padding row after every 5 data rows.
I second the view of #juergend that this should really be done in the presentation layer (although often it probably requires no less code overall to do it there than in SQL - but it does frustrate the workings of anything other than a static report, like datagrids that allow re-sorting or filtering)
I've knocked together some untested code (using Oracle syntax) which shows an example of how it's done - how we prepare the base data, then build a table of placeholders for all necessary rows, then join the base data onto the placeholders in the appropriate places. I've made some of the calculations a bit more elaborate to show where the number 5 constant is being used.
Also, I haven't included any code to knock off any surplus padding rows in the final group (i.e. as it stands the number of rows returned will always be a multiple of 6, regardless of the underlying data).
Nor have I included any code regarding the required numbers_table or sequence generator.
WITH base_data AS
(
SELECT
php.ref_dcp_key
,sum(php.group_booking) AS group_booking_sum
,count(php.group_booking) AS group_booking_count
,0 AS zero_value_column
,MOD(ROW_NUMBER() OVER (ORDER BY php.ref_dcp_key) - 1, 5) AS group_line_num
,( (ROW_NUMBER() OVER (ORDER BY php.ref_dcp_key) + (5 - 1)) / 5 ) AS row_group_num
--all appearances of the number 5 constants determine the number of lines per group
FROM
gx_pnr_history /*AS*/ ph
INNER JOIN
gx_pnr_his_prof /*AS*/ php
ON (ph.gmpnr_loc_key = php.gmpnr_loc_key)
GROUP BY
php.ref_dcp_key
)
,row_structure AS
(
SELECT
MOD(number - 1, (5 + 1)) AS group_line_num
,number + ((5 + 1) - 1) / (5 + 1) AS row_group_num
FROM
number_table /*this needs to be a reference either to a numbers table, or a number sequence generator*/
WHERE
number BETWEEN 1 AND ((SELECT MAX(row_group_num) * (5 + 1) FROM base_data))
)
SELECT
ref_dcp_key
,group_booking_sum
,group_booking_count
,zero_value_column
,ROW_NUMBER() OVER (ORDER BY row_structure.row_group_num ASC, row_structure.group_line_num ASC) AS final_order
FROM
row_structure
LEFT JOIN
base_data
ON (base_data.row_group_nun = row_structure.row_group_num)
AND (base_data.group_line_num = row_structure.group_line_num)
ORDER BY
final_order
Just started working with oracle using toad ide. trying to format the numbers from a table in specific format. the numbers come in from a variable in the table and I want to display the whole numbers as whole numbers and display floats as floats. So far, I can use trim(TO_CHAR (width,'999.999')) to display all numbers with decimal points.
For example: 123.5 will be displayed as 123.500 and 100 will be displayed as 100.000.
What I want to do is display for eg: 100 as 100.
Hope this is clear and I get a solution soon.
I'm using MOD for determining decimals.
select test_value, (case when mod(test_value,1) != 0 then 'DECIMAL' else 'NODECIMAL' END) IS_DECIMAL
from (select 1.5 test_value from dual
union all
select 100 test_value from dual) test_table
If your problem is about the way Toad shows numbers, you can follow the hints in the comments.
If the problem is about the way Oracle shows numbers, converting them to strings, maybe this can help:
SQL> select to_char(1.5, 'TM9') as num from dual union all
2 select to_char(100, 'TM9') from dual;
NUM
----------------------------------------------------------------
1,5
100
You find much more in the documentation
If you need a way to check whether a number has a decimal part or not, you can simply try:
SQL> with numbers(num) as (
2 select 1.5 from dual union all
3 select 100 from dual
4 )
5 select case
6 when floor(num) = num
7 then to_char(num, 'FM999999') || ' has not a decimal part'
8 else
9 to_char(num, 'FM9999D000') || ' has a decimal part'
10 end as checkString
11 from numbers;
CHECKSTRING
------------------------------
1,500 has a decimal part
100 has not a decimal part
Firstly, I greatly appreciate any feedback that anyone can offer. I am using Oracle SQL Developer, Version 4.0.2.15, Build 15.21.
I know and understand that many, many similar questions have been asked, as I've searched around on stackoverflow as well as the rest of the internet. However, the corresponding answers are either too vague or too extravagant, and attempt to do things that are way over my head and not what I am trying to accomplish. I am extremely new to SQL and haven't seriously done any coding since I did Java about 12 years ago. So please understand that something simple to you, is not so simple and obvious to me.
My bare-bones endstate that I am shooting for is taking a pre-existing Oracle Table Column, which is called 'service_level', that has parameters of 1-3, and making them A-C (where A=1, B=2, C=3). The reason for this is that I have an ArcGIS gdB featureclass that has a corresponding column, called 'MaintServi', with the parameters of A-C. I am going to join them using ArcToolbox once I have converted/replaced the 1-3 to A-C, and have exported them from Oracle into an Arc gdB as another table. The reason being is that the featureclass (obviously) has geometry, but this particular Oracle table does not.
From what I have gathered I know (or think) I will need to use something like:
chr(ord('a') + 3)
^ Where I will need to use/call upon the chr/ord functions. However, due to my inexperience, I cannot think of how to properly call this without getting an error. Below is what I have for my query thus far (but without chr/ord). I just need to figure out how to correctly insert it into my query to achieve the desired results.
SELECT v_wv_wp_crew.*,
Substr(v_wv_wp_crew.winter_supp_id, 1, 6) AS CostCenter,
Substr(v_wv_wp_crew.winter_supp_id, 8, 11) AS Crew_Supp_ID
FROM v_wv_wp_crew
WHERE crew_on_road >= '13-FEB-12'
AND ( operation = 2
OR operation = 3 );
Thanks again and hopefully I have complied with the posting rules of stackoverflow.
# Mark J. Bobak -
When implementing his ideas I get either this (Like I said, i'm not sure how to insert it properly without receiving an error)
SELECT v_wv_wp_crew.*,
Substr(v_wv_wp_crew.winter_supp_id, 1, 6) AS CostCenter,
Substr(v_wv_wp_crew.winter_supp_id, 8, 11) AS Crew_Supp_ID
FROM v_wv_wp_crew
WHERE crew_on_road >= '13-FEB-12'
AND ( operation = 2
OR operation = 3 )
UNION ALL
WITH service_level as (select 1 service_level from dual
union all
select 2 service_level from dual union all
select 3 service_level from dual)
select decode(service_level,1,'A',2,'B',3,'C') from service_level;
I receive the following error:
*ORA-32034: unsupported use of WITH clause
32034. 00000 - "unsupported use of WITH clause"
*Cause: Inproper use of WITH clause because one of the following two reasons
1. nesting of WITH clause within WITH clause not supported yet
2. For a set query, WITH clause can't be specified for a branch.
3. WITH clause can't sepecified within parentheses.
Action: correct query and retry
Error at Line: 14 Column: 25
Or I receive an output of only 3 rows (A, B, C) if I run the query separately - sorry I don't have enough reputation to post the image yet.
You can use the DECODE() function. Something like this should work:
with list_of_digits as (select 1 col_a from dual
union all
select 2 col_a from dual
union all
select 3 col_a from dual
union all
select 4 col_a from dual)
select decode(col_a,1,'A',2,'B',3,'C','Other') from list_of_digits;
Using your query, try this:
WITH service_level as (select 1 service_level from dual
union all
select 2 service_level from dual union all
select 3 service_level from dual)
select decode(service_level,1,'A',2,'B',3,'C') from service_level
union all
SELECT v_wv_wp_crew.*,
Substr(v_wv_wp_crew.winter_supp_id, 1, 6) AS CostCenter,
Substr(v_wv_wp_crew.winter_supp_id, 8, 11) AS Crew_Supp_ID
FROM v_wv_wp_crew
WHERE crew_on_road >= '13-FEB-12'
AND ( operation = 2
OR operation = 3 );
ord isn't an Oracle function. The equivalent Oracle function is ASCII. However, even substituting in the correct function, I don't see how that gets you what you want.
It seems most likely that you just want to add a column (I'd use case to translate the values):
SELECT v_wv_wp_crew.*,
Substr(v_wv_wp_crew.winter_supp_id, 1, 6) AS CostCenter,
Substr(v_wv_wp_crew.winter_supp_id, 8, 11) AS Crew_Supp_ID,
case service_level
when '1' then 'a'
when '2' then 'b'
when '3' then 'c'
end as service_level_alpha
FROM v_wv_wp_crew
WHERE crew_on_road >= '13-FEB-12'
AND ( operation = 2
OR operation = 3 );
If you want to return this column as service_level, then you'll need to return the full list of columns instead of using the asterisk.
Since this is a straight-forward character swap, you could use translate to really streamline the operation: translate(service_level,'123','abc'). However, I vastly prefer case over either decode or translate for readability