For BITS Transfer on Windows, There are some JOBIDS whose TransferType is "upload" and JobState is "Suspended". I am executing below command from PowerShell :-
Get-BitsTransfer | Resume-BitsTransfer
I am getting below error :-
Resume-BitsTransfer : Exception from HRESULT: 0x80200003 At line:1
char:20
+ Get-BitsTransfer | Resume-BitsTransfer
+ ~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (Microsoft.Backg...agement.BitsJob:BitsJob) [Resume-BitsTransfer], COM
Exception
+ FullyQualifiedErrorId : ResumeBitsTransferCOMException,Microsoft.BackgroundIntelligentTransfer.Management.Resume
BitsTransferCommand
How can I can resume these jobs.
Any Suggestions...
Thanks..... !!
Related
My PC environment is Windows 10 Enterprise Evaluation, Build 17763.rs5_release.180914-1434
When I entered this command $consumer = ([wmiclass]"\.\root\subscription:CommandLineEventConsumer").CreateInstance() in Powershell (Run as Administrator), I got an exception like below.
Cannot convert value "\\.\root\subscription:CommandLineEventConsumer" to type "System.Management.ManagementClass". Error: "Not found
"
At line:1 char:1
+ $consumer = ([wmiclass]"\\.\root\subscription:CommandLineEventConsume ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvalidCastToWMIClass
I tried to digger more deeper information, then I got some messages like below
System.Management.Automation.RuntimeException: Cannot convert value "\\.\root\subscription:CommandLineEventConsumer" to type "System.Management.ManagementClass". Error: "Not found " ---> System.Management.Automation.PSInvalidCastException: Cannot convert value "\\.\root\subscription:CommandLineEventConsumer" to type "System.Management.ManagementClass". Error: "Not found " ---> System.Management.ManagementException: Not found
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.Automation.LanguagePrimitives.ConvertToWMIClass(Object valueToConvert, Type resultType, Boolean recursion, PSObject originalValueToConvert, IFormatProvider formatProvider, TypeTable backupTable)
--- End of inner exception stack trace ---
at System.Management.Automation.LanguagePrimitives.ConvertToWMIClass(Object valueToConvert, Type resultType, Boolean recursion, PSObject originalValueToConvert, IFormatProvider formatProvider, TypeTable backupTable)
at System.Management.Automation.Interpreter.DynamicInstruction`2.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
--- End of inner exception stack trace ---
at System.Management.Automation.ExceptionHandlingOps.CheckActionPreference(FunctionContext funcContext, Exception exception)
at System.Management.Automation.Interpreter.ActionCallInstruction`2.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
Actually, I could register __EventFilter, __EventConsumer and __FilterToConsumerBinding at first.
However, after trying some commands related to register and unregister WMI (Sorry I didn't remember what commands I tried...), I couldn't register __EventConsumer anymore, even though I tried to reboot PC and unregister all of them, I still get the exception like above.
you can try something like this instead to create a new instance in the CommandLineEventConsumer Class. The same will go for Filters and Consumer Binding.
$Properties = #{
"Name"="Test"
"CommandLineTemplate"="C:\Windows\Notepad.exe"
}
New-CimInstance -Namespace 'ROOT\subscription' -ClassName 'CommandLineEventConsumer' -Arguments $Properties
Below is the msg while creating a New-Object (Powershell)
I tried opening Powershell
as Admin
32bit ISE
64bit ISE
Nothing helped
> New-Object : Retrieving the COM class factory for component with CLSID
> {00000000-0000-0000-0000-000000000000} failed due to the following
> error: 80040154 Class not registered (Exception from HRESULT:
> 0x80040154 (REGDB_E_CLASSNOTREG)). At line:1 char:8
> + $obj = New-Object -ComObject Microsoft.SMS.Client -Strict
> + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + CategoryInfo : ResourceUnavailable: (:) [New-Object], COMException
> + FullyQualifiedErrorId : NoCOMClassIdentified,Microsoft.PowerShell.Commands.NewObjectCommand
I was able find alternative way to set the site code which I was trying to earlier with the com-object and fix the issue. but still not sure what is wrong with the above method
I have been using powershell on a win 10 environment for a few months now, so still new to powershell and am trying use the powershell console as a technical point of display, whereby it cycles/loops through various components of data and displays the information at various coordinates of the console window. The problem I have is it can only display the data from any one particular loop at any one time. I suspect a type of multithreading is going to be needed like runspaces or psjobs, but I believe they are both background functions and cant display data in real-time, so not sure if the console even supports this kind of request.
Perhaps there is another way of going about this
I have tried putting all my scripts and get- command under one loop but it doesnt provide the "look" and feel we are trying to achieve. I want to be able to use the entire window as realestate for outputing objects. I have looked at psjobs and runspaces but they seem to work in the background.
So the code presented should output the get-service ojbects and the get-process objects to the coordinates specified at the same time.
function OBJ1{
[console]::setcursorposition(60,120)
Get-Process
]}
function OBJ2{
[console]::setcursorposition(10,70)
Get-Service
]}
Workflow obj3
{
Parallel
{
obj1
obj2
}
}
obj3
Instead the errors I get are:
<!-- language: lang-none -->
Microsoft.PowerShell.Utility\Write-Error : Exception calling "SetCursorPosition" with "2" argument(s): "The handle is invalid.
"
At obj3:20 char:20
+
+ CategoryInfo : NotSpecified: (:) [Write-Error], RemoteException
+ FullyQualifiedErrorId : System.Management.Automation.RemoteException,Microsoft.PowerShell.Commands.WriteErrorCommand
+ PSComputerName : [localhost]
Microsoft.PowerShell.Utility\Write-Error : Exception calling "SetCursorPosition" with "2" argument(s): "The handle is invalid.
"
At obj3:20 char:20
+
+ CategoryInfo : NotSpecified: (:) [Write-Error], RemoteException
+ FullyQualifiedErrorId : System.Management.Automation.RemoteException,Microsoft.PowerShell.Commands.WriteErrorCommand
+ PSComputerName : [localhost]
I am running the following code in PowerShell ISE:
$scriptDirectory = "C:\Test"
$dteObj = [System.Activator]::CreateInstance([System.Type]::GetTypeFromProgId("VisualStudio.DTE.10.0"))
$slnName = "All"
$dteObj.Solution.Create($scriptDirectory, $slnName)
I get the error:
You cannot call a method on a null-valued expression.
At C:\DevHome\TFS\CreateMasterSolution.ps1:8 char:1
+ $dteObj.Solution.Create($scriptDirectory, $slnName)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull
Why is the Solution Property on this COM Object always "null"? Is there something I am forgetting to do?
In Addition to that do also:
$solution = $dteObj.Solution
$solution.Open("<path to your solution>")
Seems that if you replace the above with the following it works:
$dteObj = New-Object -ComObject "VisualStudio.DTE.10.0"
I tried
[System.Reflection.Assembly]::LoadWithPartialName("Oracle.DataAccess")
$bulkCopy = new-object Oracle.DataAccess.Client.OracleBulkCopy $oraClientConnString
and got
GAC Version Location
--- ------- --------
True v2.0.50727 C:\Windows\assembly\GAC_32\Oracle.DataAccess\2.111.6.0__89b483f429c47342\Oracle.DataAccess.dll
New-Object : Cannot find type [Oracle.DataAccess.Client.OracleBulkCopy]: make sure the assembly containing this type is loaded.
At line:3 char:23
+ $bulkCopy = new-object <<<< Oracle.DataAccess.Client.OracleBulkCopy $oraClientConnString
+ CategoryInfo : InvalidType: (:) [New-Object], PSArgumentException
+ FullyQualifiedErrorId : TypeNotFound,Microsoft.PowerShell.Commands.NewObjectCommand
Cf. OracleBulkCopy Class
What is missing?
Maybe you're using an older version of Oracle? I see documentation for this class on Oracle for 11g or later.
http://download.oracle.com/docs/html/E10927_01/OracleBulkCopyClass.htm
Oracle.DataClient.dll is the containing assembly in the above documentation.
Try this:
ps> $a = [reflection.assembly]::loadwithpartialname("oracle.dataaccess")
ps> $a.getexportedtypes() | where { $_.fullname -like "*bulk*" }
-Oisin