I understand that there is definitely something wrong with my report (e.g. columns missmatcch) and I need to correct it but what I see is the WCF error message that hides actual problem and exactly this hiding irritates me much more than original problem: columns missmatch.
I guess we need to adjust the WCF 'buffer size' and we will get original problem message. But where is the config file?
Text search of "system.serviceModel" in the C:\Program Files (x86)\Microsoft Visual Studio 10.0 doesn't bring good idea...
P.S. Since this is just preview of report I do not think that it is SSRS configuration problem. Problem localised somewhere in DevStudio process or int the DevStudio's internal web server process ...
P.P.S Please help me too improve the question. I see that responders doesn't understand what kind of help I need.
I have encountered multiple "flavors" of this bug in SSRS Preview. It seems the renderer for Preview mode is quite fragile.
There is a simple way to solve this. Ignore the error and attempt to upload the RDL file to your reporting server. The uploader will happily tell you exactly what is wrong with your file - it will tell you exactly what field has a problem and what that problem is. If there are multiple errors, you will get told each and every field and the error associated with each one.
I can create this bogus XML buffer error with any of the following:
Add a new Tablix, start to connect it to a dataset, then cancel out.
Copy/paste some text into a textbox from a MS Word document where one or more lines have a negative right indent (right column end is outside page margin).
Connect a dataset with a varchar(8000) returned value.
Please Check if any of your report items are referencing fields that are not in existing dataset scope.
This indeed worked for me.
See Below link for more information:
http://connect.microsoft.com/SQLServer/feedback/details/742913/ssdt-reporting-services-designer-error
I have seen this error when adding a new field to an existing dataset by clicking "Refresh Fields".
The dataset source was a stored procedure. The result was only a few of original fields showed up in the dataset field list and not the new field. If I tried to preview the report I get XML buffer error.
Workaround was to not refresh fields but hit add new field and type the new field name into the dataset properties field last.
Worked fine after that.
I got this error again today.
I had created a table to hold data to replace two slow queries. I changed some names to clean up the process.
I think the error actually means that there are so many problems with my report that the buffer holding the various error messages isn't large enough which leads to the error message.
The size necessary to buffer the XML content exceeded the buffer quota
Of course this should be an easy fix but Microsoft has said that they will not fix it.
https://connect.microsoft.com/SQLServer/feedback/details/742913/ssdt-reporting-services-designer-error
EDIT: I've updated my answer based on having fixed the issue.
I'm currently experiencing this problem after having changed multiple stored procedures and updating the dataset names in the SSRS report.
And when I try to run the preview I get the exact same error.
As it turns out, after investigating the issue, the problem was that I had changed the name property of my datasets.
There several places in my report where formulas or expressions use the old name properties of the datasets I renamed. After reverting the dataset names back, I managed to get the real errors like missing fields etc. atcual errors came back after I set my dataset name properties back to what they were.
I only changed the name property back to what it was, the stored procedure names were correctly referring to my renamed stored procedures.
I had this problem when after copying and pasting a tablix, it changed CDbl in a formula to Microsoft.ReportingServices.RdlObjectModel.ExpressionParser.VBFunctions.CDbl. I opened up the XML and removed all instances of "Microsoft.ReportingServices.RdlObjectModel.ExpressionParser.VBFunctions." and the report then worked.
For a working report, when I tried to add a column it gave me this error. I edited the .rdl file using notepad++. After SSRS prompt to reload the change from disk, it worked without issues.
I got this error after copying my Custom Code to Visual Studio for hightlighting the code for better readability. Well, Visual Studio added class definitions to the beginning and end of the file. After editing code, I pasted it back to report Custom Code, then got this error. Fix was just to remove class definitions (Public Class Class1 and End Class) from Custom Code. So, check your Custom Code also (if any).
I got this error after adding some new parameters to an existing report.
For some reason when I created the parameters first then modified the Dataset to use the new parameters I got the error, but when I modified the Dataset first then added the parameters second and I did not get the error.
This seemed like very strange behavior to me so I tested it by restoring the report from repository and repeating the process three times with each method, and had identical behavior every time.
I am also facing this problem. I solve this Find and replace
Microsoft.VisualBasic.Interaction.iif ==> iif
Microsoft.ReportingServices.RdlObjectModel.ExpressionParser.VBFunctions.cdbl
==> cdbl
I hope this may helps someone. Thanks
Possible root causes
Parameter name is incorrect(case/order)
Accessing non-existing property.
and many more...
Solution: To get the exact error message are
Deploy SSRS report and find the error : Suggested by "Kim Crosser" already
Remove the section(SSRS/Report content) temporarily you feel is error free to free space in buffer so that you can get actual error message. Later add sections back to the page(removed earlier).
I had the same error message and it was totally caused by my doing. It's a bit embarrassing, but if it helps someone out then great! I had accidentally copied my dataset query that included a small sub select statement within it, which I was using to check parameter/variable values.
Another solution is to open the .rdl file in Report Builder 3.0 (as opposed to Visual Studio) and try to preview it. I found this gave me the details of the error, although if more than one error is present it only shows the first.
I previously binded a TextBox to
Fields!FieldName
and fixed it with
Fields!FieldName.Value
With that said, and with the other answers posted as well, this error happens in different flavors. My issue was fixed after I had the field property "Value" included.
Seems like once you set the Testers field on a Test Case in MTM, it will not allow you to clear it. You are only allowed to change it to a different value. Has anyone found a way to clear this field?
It is important to not get the "Assigned" Tester field confused with the Assigned To field. They are distinct fields on a Test Case work item. One reason why someone might want the Tester field to be blank is if a team all pitches in to help with testing during an iteration and leaving the assigned tester blank allows the team to know that no one has "picked up" this test to execute. The team member could then assign the test to his or herself and execute it.
The template pulls the Assigned Tester Values from a list using the 'AllowedValues' tag. Instead, simply change this to 'SuggestedValues'. That will allow for empty values - easy as that.
If you'd rather not allow free entry, you can also add a default value such as 'None' and use that rather than blank.
Unless you've customized your work item type, this field should never be blank after being saved. It defaults to the person who created the bug in all Microsoft supported process templates, and a value is required by default.
That being said, why would you want to change it to blank?
If you really, really want to be able to blank it out (which I don't think is a good idea at all), you'll need to customize your template. See the below guidance:
http://msdn.microsoft.com/en-us/library/ms243849(v=vs.110).aspx
Please consider the situation where a product has extra SKU parts in it's custom options. The product may have a SKU product and the custom option has option, the end result will automatically be product-option.
Now go into the admin and attempt to order this product with a custom price, the custom option becomes an 'additional option' and the extra -option is missing. My store (enterprise 1.8) needs these SKUs to be intact but I need help making a fix for this. I expect I will have to override Mage_Adminhtml_Model_Sales_Order_Create at some point and that's OK.
I've googled this problem until my fingers are numb but cannot even find mention of it let alone a confirmed fix. Please point me at the cause of the problem.
This was hard to track down because it seemed intermittent. I'm answering myself in detail because I don't want anyone else to go through the same ordeal.
The problem stemmed from custom options which both added a custom SKU and contained a colon in their title. If you look closely in the following picture you can just see two colons in "Colors::Black" - the first is the option's name, the second is added by Magento. When updating the order it attempts to parse the custom options back from that text box and the extra colon throws a spanner.
The other bad thing is because Magento cannot read the custom option back that particular option gets dropped. In this case it's a required option, which leads to a warning message.
Since the option is missing so is it's SKU part. Other custom options are not affected which clouds the issue. The simple answer to all this is to just avoid colons.
Sorry if this is a duplicate post, not sure what happened with my original one.
I have a linked SSRS report (Report A) that links to Report B. One of Report B's parameters is controlled by a Dropdown/ComboBox. In the parameters dialog box that gets launched from the navigation tab, I have tried both 'VALUE' and simply putting VALUE without the single quotes.
Both ways result in an error stating that the parameter was not provided. How do I correctly pass this value, so that Report B will recognize it?
Thanks
I'm new to SSRS, so I apologize if this question is too simple:
I have a report which accepts a parameter called "Amount". I want to constrain valid inputs to currency values >= 0, and pop open an error message if the user enters improper values.
I don't want to validate inputs in my stored procedure and throw exceptions, because SSRS displays a very generic "Query execution failed for 'someTable'" message to users who access the report from another machine, and my business does not want to turn on the "Enable Remote Errors" flag.
How do I add input validation to report parameters and notify users of bad input?
Yes, I've googled around, but haven't had much luck. Thanks in advance :)
Okay, how about this?
All you have in SSRS, really, is the SQL query and expressions in report fields.
Perhaps you could add a big, red text box at the top of the report for your error message, and give it an expression like '=IIf(Parameters!Amount.Value < 0, "Error: Invalid Amount", "")'.
Then go to your table's "Hidden" property and give it the expression "=Parameters!Amount.Value < 0"
You could also add into your query's where clause and add "AND #Amount >= 0" so you aren't fetching from the database when there's an error.
It's possible to make report parameters in SSRS that are based on a particular list or a lookup query but I don't think you can apply a regex or something like that.
Instead you might consider separating your report into two panels, one which displays your report and one which displays an error and then you create an assembly with a function in it that validates the parameters for the report before it is run. If the validate parameters function is successful you hide the error panel and show the report panel, if not you do the opposite.
I don't think there's a whole lot you can do in the reporting tool itself. It's pretty rudimentary.
However, you can provide an ASP.net web interface or a form that you can use to ask the users for the parameter values in any format .NET allows, and use the ReportViewer control to display the report. It sounds daunting, but it's actually pretty straight-forward, particularly if you already have a project you can build on.
Microsoft gives tutorials for using the ReportViewer controls.