Here is my file, I am not getting anything logged, although the loading is apparently successful, as I can see it running with the list command;
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.whtDaily.gexUW</string>
<key>ProgramArguments</key>
<array>
<string>/Users/x/Dropbox/ai/getData.sh</string>
</array>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>22</integer>
<key>Minute</key>
<integer>15</integer>
</dict>
<key>RunAtLoad</key><true/>
<key>StandardErrorPath</key>
<string>/Users/x/Dropbox/ai/logs/daily.err</string>
<key>StandardOutPath</key>
<string>/Users/x/Dropbox/ai/logs/daily.out</string>
</dict>
</plist>
I am also not clear if I need to running 'start' after load, or does that happen automatically since I have the 'RunAtLoad' key set to true? I have tried calling start after load, and not with no luck.
This plist file is in the /Library/LaunchAgents directory and I am calling with load and unload with sudo.
The sh file was not executable.
chmod +x getData.sh
did the trick.
Related
I built a job by Automator to clear the downloads folder and empty the trash. When i start the created app by double click, it starts correctly. But it has to be transferred to other computer in our company and i dont want to give the user the job to launch the app.
So i created this LaunchAgent script to start the app.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.herpag.aufraeumen.plist</string>
<key>ProgramArguments</key>
<array>
<string>/Users/hansthiele/Applications/Aufraeumen.app</string>
</array>
<key>StartCalendarInterval</key>
<dict>
<key>Minute</key>
<integer>45</integer>
<key>Hour</key>
<integer>13</integer>
</dict>
</dict>
</plist>
My problem is now, that the console tells me that the job is started, but nothing happens. The downloads are not cleared and the trash is still full. Also the error.log is empty.
There are 2 issues:
The Label argument must be specified without the .plist extension.
The path must represent the executable rather than the application container. In case of an Automator app the executable is named Application Stub (unlike Applet in an AppleScript app). It's assumed that hansthiele is the real short username of the current user.
Try
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.herpag.aufraeumen</string>
<key>ProgramArguments</key>
<array>
<string>/Users/hansthiele/Applications/Aufraeumen.app/Contents/MacOS/Application Stub</string>
</array>
<key>StartCalendarInterval</key>
<dict>
<key>Minute</key>
<integer>45</integer>
<key>Hour</key>
<integer>13</integer>
</dict>
</dict>
</plist>
I'm current trying to set up my program as a scheduled task in OSX. I tried setting up a plist file for launchd after compiling with the mix using escript.build.
However, OSX simply ignores running my program even though launchd says it's "Loaded".
If I try to execute the program in a terminal it runs fine. Here is what my plist file looks like
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnableGlobbing</key>
<false/>
<key>Label</key>
<string>com.plisterine.test</string>
<key>LowPriorityIO</key>
<false/>
<key>Nice</key>
<integer>0</integer>
<key>ProgramArguments</key>
<array>
<string>/Users/Lee1/Documents/flower_power_data_dump/flower_power_data_dump</string>
</array>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>14</integer>
<key>Minute</key>
<integer>20</integer>
</dict>
</dict>
</plist>
I want to rsync my /var/repo backup to a remote machine when it changes.
I made a ssh key pairs to make my machine can ssh login to remote without password(ignore details).
I added a file com.ph.rsync2.plist in ~/Library/LaunchAgents.
The content is
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.ph.rsync2.plist</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/rsync</string>
<string>-avz</string>
<string>--rsh=ssh</string>
<string>/var/repo</string>
<string>flora#192.168.19.28:/var/ph_backups/</string>
</array>
<key>WatchPaths</key>
<array>
<string>/var/repo</string>
</array>
</dict>
Then I launchctl load com.ph.rysnc2.plist.
When /var/repo has any change, it will trigger rsync to work
but I always get the error log in Console.app
It reads like
11/3/15 2:15:26.399 PM com.apple.xpc.launchd[1]:
(com.ph.rsync2.plist) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
And I tried to move the rsync commands to a script, then let launchd exec my script. but it's still the same
I can't figure out which part of settings make all these fail.
Anyone can give me a clue?
Comments will mess up the formatting, so I'll post how to setup the StandardErrorPath key as an answer.
Modify your job definition like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.ph.rsync2.plist</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/rsync</string>
<string>-avz</string>
<string>--rsh=ssh</string>
<string>/var/repo</string>
<string>flora#192.168.19.28:/var/ph_backups/</string>
</array>
<key>StandardErrorPath</key>
<string>/tmp/com.ph.rsync2.plist.stderr</string>
<key>WatchPaths</key>
<array>
<string>/var/repo</string>
</array>
</dict>
</plist>
Check the file /tmp/com.ph.rsync2.plist.stderr after reloading and starting the job.
I need to run an mac app daily without any user interaction using launchd, i created a .plist file and pasted it in /system/LaunchDaemons and after that how to execute the plist file, can any one please tell me the step by step working process on how to work with launchd it will helpful for me, I pasted my .plist file below.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>myapp.restart</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/myapp.app</string>
</array>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>16</integer>
<key>Minute</key>
<integer>40</integer>
</dict>
</dict>
</plist>
You'll probably need the name of your program like this rather than ProgramArguments:
<key>Program</key>
<string>/Applications/myapp.app/Contents/MacOS/myapp</string>
Launch daemon worked as it should but now the problem is it keeps loading the same shell script and I can see multiple entries for the same rule. sudo ipfw list. How can this be prevented?
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.ipfw</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/ipfw.apple.startup.sh</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>Apple IPFW Filter Rules</string>
<key>StandardErrorPath</key>
<string>/var/log/ipfw.apple.stderr</string>
<key>StandardOutPath</key>
<string>/var/log/ipfw.apple.stdout</string>
<key>UserName</key>
<string>root</string>
</dict>
Use LaunchOnlyOnce key in plist file.
LaunchOnlyOnce :
This optional key specifies whether the job can only be run once and only once. In other words, if the
job cannot be safely respawned without a full machine reboot, then set this key to be true.