I have created a new attribute on magento 1.9 and called category_grouped. Now I am trying to get it's value on catalog page by using getAttributeRawValue but all I am getting is an ID. How could I get the value name rather than the ID? Below is my code. Thanks
<?php $attributeId = Mage::getResourceModel('catalog/product')-
>getAttributeRawValue($_product->getID(), 'category_grouped', $storeId);?>
The getAttributeText gets the value / name of the given attribute while getAttributeText return in this case the ID.
$attributeValue = Mage::getModel('catalog/product')
->load($_product->getID())
->getAttributeText('category_grouped');
You can set attribute value by using below code
$product->CategoryGrouped();
Thanks
Related
How can I get all configurable attributes in attribute set?
I was looping all the attribute set then I want to display only its configurable attribute.
You should be able to get an attribute collection and filter it (based on the attribute set) - this would return you all attributes in the specified set that are configurable.
$attributes = Mage::getResourceModel('catalog/product_attribute_collection')
->setAttributeSetFilter($attributeSetId)
->addFieldToFilter("is_configurable", array("eq", "1"))
->getItems();
I assume that by configurable attributes, you actually mean attributes that can be used to create a configurable product. Douglas Radburn's answer is the right way to do this, it's only missing two more filters. As you can see in the picture above, there are three conditions for using an attribute to create a configurable product. Using the image's message as reference, we can construct the following collection.
$attributes = Mage::getResourceModel("catalog/product_attribute_collection")
->setAttributeSetFilter($attributeSetId)
->addFieldToFilter("frontend_input", "select")
->addFieldToFilter("is_configurable", "1")
->addFieldToFilter("is_global", "1");
This will work:
$objAttributes = Mage::getResourceModel('catalog/product_attribute_collection')
->addFieldToFilter("is_configurable", array("1"))
->getItems();
Sorry I got my initial question wrong.
I want to get the attribute set name in the compare products page (the page that compares products side by side)
I want to get the Group names, that fall under the attribute set. U know how the attribute sets are maintained ( Attribute Set > Groups > Attributes ) So that I can display the compare page product attributes by group name. How can I get the group names?
I'm not sure how to do this, can someone point me to the right code or right direction?
The template being used for this page is the default one at:
template\catalog\product\compare\list.phtml
To fetch the attribute set name in the compare products page, you can try the following code in your template\catalog\product\compare\list.phtml
After this line of code
<?php foreach($this->getItems() as $_item): ?>
Paste this code to print your attribute set name
// Get attribute set model.
$model = Mage::getModel('eav/entity_attribute_set');
// Get attribute set id.
$attributeSetId = $_item->getAttributeSetId();
$attributeSet = $model->load($attributeSetId);
// This is attribute set name.
$attributeSetName = $attributeSet->getAttributeSetName();
echo $attributeSetName;
The above code will print your attribute set name and based on your HTML requirement, you can alter the code.
I want to set a default value of an attribute for all product.
I had same problem before,when i added 11096 product(downloadable products) in my store then client told me to add new attributes in product so i create 1 attribute (Type is Yes/No) and set to attribute set.
Now my problem is how can i edit all product and set that attribute yes or not.if i not set then value is null so i wrote few line code.
Please check this code may be it'll helpful to you.
$ProductId = Mage::getResourceModel('catalog/product_collection')
->addAttributeToFilter('type_id', Mage_Downloadable_Model_Product_Type::TYPE_DOWNLOADABLE)
->getAllIds();
//Now create an array of attribute_code => values
$attributeData = array("my_attribute_code" =>"my_attribute_value");
//Set the store to affect. I used admin to change all default values
$storeId = 0;
//Now Update the attribute for the given products.
Mage::getSingleton('catalog/product_action')
->updateAttributes($ProductId, $attributeData, $storeId);
As stated here:- http://www.magentocommerce.com/knowledge-base/entry/tutorial-creating-attributes-custom-fields
Default Value: You can enter a value that will automatically populate
for new products.
So, I think it only applies for New products that you create after you create that attribute. Hence, the attribute's default value setting might not be applied to those products which were created before creating the attribute.
I had the similar issue and to solve it, I wrote the following code in the file where I want to display the attribute's default value:-
$attributeCode = 'YOUR_ATTRIBUTE_CODE';
$attribute = Mage::getResourceModel('eav/entity_attribute_collection')
->setCodeFilter($attributeCode)
->getFirstItem();
echo $attribute->getDefaultValue();
You can also solve the problem by doing a massupdate for all products. Go to the Manage Products paga and Select All followed by Update attributes.
You can do it in Attribute management
Admin panel - Catalog - Attributes - Manage Attributes
Select attribute - Properties - Attribute Properties - Default value
I want to set a default value of an attribute for all product.
I had same problem before,when i added 11096 product(downloadable products) in my store then client told me to add new attributes in product so i create 1 attribute (Type is Yes/No) and set to attribute set.
Now my problem is how can i edit all product and set that attribute yes or not.if i not set then value is null so i wrote few line code.
Please check this code may be it'll helpful to you.
$ProductId = Mage::getResourceModel('catalog/product_collection')
->addAttributeToFilter('type_id', Mage_Downloadable_Model_Product_Type::TYPE_DOWNLOADABLE)
->getAllIds();
//Now create an array of attribute_code => values
$attributeData = array("my_attribute_code" =>"my_attribute_value");
//Set the store to affect. I used admin to change all default values
$storeId = 0;
//Now Update the attribute for the given products.
Mage::getSingleton('catalog/product_action')
->updateAttributes($ProductId, $attributeData, $storeId);
As stated here:- http://www.magentocommerce.com/knowledge-base/entry/tutorial-creating-attributes-custom-fields
Default Value: You can enter a value that will automatically populate
for new products.
So, I think it only applies for New products that you create after you create that attribute. Hence, the attribute's default value setting might not be applied to those products which were created before creating the attribute.
I had the similar issue and to solve it, I wrote the following code in the file where I want to display the attribute's default value:-
$attributeCode = 'YOUR_ATTRIBUTE_CODE';
$attribute = Mage::getResourceModel('eav/entity_attribute_collection')
->setCodeFilter($attributeCode)
->getFirstItem();
echo $attribute->getDefaultValue();
You can also solve the problem by doing a massupdate for all products. Go to the Manage Products paga and Select All followed by Update attributes.
You can do it in Attribute management
Admin panel - Catalog - Attributes - Manage Attributes
Select attribute - Properties - Attribute Properties - Default value
I am trying to get attribute set name in Magento product view template. I can get attribute value by $_product->getAttributeText('attribute'), but how do I get attribute set name?
I would like to display an attribute only if it is belong to a certain attribute set.
Whenever you have a product object, you can access its attribute set like this:
$attributeSetModel = Mage::getModel("eav/entity_attribute_set");
$attributeSetModel->load($product->getAttributeSetId());
$attributeSetName = $attributeSetModel->getAttributeSetName();
This will give you the name of the attribute set, which you can then compare using strcmp:
if(0 == strcmp($attributeSetName, 'My Attribute Set')) {
print $product->getAttributeText('attribute');
}
For more sexyness you can shorten it to:
$attributeSetName = Mage::getModel('eav/entity_attribute_set')->load($_product->getAttributeSetId())->getAttributeSetName();
Try the following code:
$entityTypeId = Mage::getModel('eav/entity')
->setType('catalog_product')
->getTypeId();
$attributeSetName = 'Default';
$attributeSetId = Mage::getModel('eav/entity_attribute_set')
->getCollection()
->setEntityTypeFilter($entityTypeId)
->addFieldToFilter('attribute_set_name', $attributeSetName)
->getFirstItem()
->getAttributeSetId();
echo $attributeSetId;
Find more info about Attribute Set in the following article.
Thanks
Joe's answer requires a couple of alterations in order for it to work.
Firstly it should be $_product not $product, and secondly there is an erroneous ')' in the last line.
The following code should be correct:
$attributeSetModel = Mage::getModel("eav/entity_attribute_set");
$attributeSetModel->load($_product->getAttributeSetId());
$attributeSetName = $attributeSetModel->getAttributeSetName();
Comparing to a text value can have problems if users decide to later change that text - which is easy to do in Magento for attribute sets. One other option is to use the underlying id instead which is never going to change.
You can get this by looking up the value of the attribute_set_id column in the database using
select * from eav_attribute_set;
This number is also in the edit link in admin which is in bold below
http://.../index.php/admin/catalog_product_set/edit/id/10/key/6fe89fe2221cf2f80b82ac2ae457909ce04c92c51716b3e474ecad672a2ae2f3/
Your code would then simply use that property of the product. Base on the id of 10 in the link above this would just be
if (10 == $_product->getAttributeSetId()) {
//Do work
}