xCode 9: Is it possible to switch off animation of xCode itself - xcode

just started with xCode 9.0 and I got the feeling, that all this "nice and beautiful" animations where hints and messages moved ANIMATED in and out during editing are ... painful...
I know it's a matter of taste, however, does someone know if it is possible to switch off these animations? .. and how and where?
EDIT: As someone casted this down (without explanation), maybe an explanation from me for the reasons of that question would be useful.
Maybe I'm doing it the wrong way, but when I code I have a rough idea in my mind, write some comments to sketch the idea and start coding. Coding is an interactive process where I type very fast, think, erase and retype etc. I also copy code fragments and "repair" it on its final destination etc.. highly interactive.
Xcode needs (on big code files) roughly a second to make decisions about giving the user a hint or not. Most annoying hint in the case I'm talking here is "missing blabla ..."
When start typing an statement it is of course not finished. The sad thing: by the time Xcode has done its decision process and end the animation to roll in the hint message (1 sec decision, 1 sec animation) the statement is already completed by me.
In fact, it is often done BEFORE the animation starts - but that is another story.
Luckily during the animation of rolling in (1 sec), Xcode find out that the hint is not needed anymore (decision time of 1 sec matches the animation happening in parallel) and rolls the hint back (animation duration 1 sec).
So all time I code there is a nice "firework" of outdated hint messages rolling in and out.
Don't get me wrong I love the hint messages and all the other messages which Xcode really helps to avoid hard to find code errors.
I simply do not like this animations, as they use one wasted second every time they appear. This is a nice feature for presentations (e.g. WWDC talks), but in day by day fast coding mode, they are not useful.
So I look for a way to switch just the animation off.
Thanks a lot in advance
Hardy

Related

Does Netlogo have a way for Code Debugging?

Anybody knows guys is there a possibility to trace a code in Netlogo statement by statement, like using F7 or F8 in C/C++,...
Generic longer comment:
/*
So as the comments above say, there is not a debugger but there are work-arounds.
Replayable random-seeds and many print statements help. I define v-print routine to print if a "verbose" switch is TRUE, so I can put in lots of v-print statements, sometimes one per line of code, but shut them all off until needed with one interface switch.
For many Netlogo users, judging by the questions, this is the first programming language they have ever used. So there is some generic advice like "take small steps and do sanity checks often, expecting that something will go wrong."
But maybe the best and hardest advice is to learn enough Git and GitHub to set up a repository and "SAVE COMMENTED VERSIONS OFTEN", because otherwise it is a losing proposition to try to debug tangled code with multiple errors that you have been trying random changes on to see if they help. Some times you need to fall back to the prior last-good version and work forward from there again step by step looking for where it breaks. Working forward is easy. Debugging backwards is hard.
Debugging code with one error is much easier than debugging code with multiple errors.
Decades ago I used to repair analog televisions. I loved rich people because they called as soon as one thing was wrong. Poor people waited until the set was full of errors then called. I've seen similar behavior in programmers continuing to code hoping that prior errors will somehow magically go away. Slow is fast.
GitHub has been a life-saver a few times when I accidentally deleted a section of code in the editor and didn't notice I'd done it. It's easy to have lines of code highlighted and then type a word while not looking at the screen. Then you go crazy with code that worked yesterday and doesn't work today and you "didn't change anything".
Using GitHub to restore a prior version, or simply doing a differences ( "diff" ) between the current version and prior version shows what changed.
*/

SourceKitService eating all CPU on Xcode 8.3.2

I'm ok Xcode 8.3.2 and SourceKitService is using all my CPU. I read a lot of questions here on stackoverflow, but I could't find a real solution.
What I tried:
Clean project data: cmd+shift+alt+K
Delete derivedData folder
reboot Xcode
redownload the project code from git
Nothing worked. I understood the issue is probably related to some code, but how can I spot where is the issue? My project is quite big...
Currently Xcode is unusable...
Thanks for your help
This is not really a "fix" because it will also be detrimental to people who rely on having live issues shown to them. But if you go to Preferences->General and switch off "Show live issues" then xcode runs like a bunny on a cool spring day. I prefer that over having to force quit SourceKit service every now and then.
SourceKit has always been CPU and RAM hungry, slow and prone to crashes.
It gets (in my experience) a little better with Xcode 9.
One big problem is that many expressions in Swift have a large number of overloads. For type inference to work, all of them have to be tested. This is also the reason why compile times for Swift code are often a little bit longer.
Once SourceKit begins to work on such expressions, everything else has to wait.
You can help SourceKit by avoiding long expressions especially when using binary operators and chains of map, flatMap and filter operations on collections and sequences, as the time complexity for resolving the return type on such expressions is exponential.
You can try to reduce long type inference times by declaring the types of variables (let a: X = expr instead of let a = expr). In my experience, this also helps in closures for chains map, filter and flatMap chains ({ param -> Result in ...} instead of { param in }).
You can use the -Xfrontend -debug-time-function-bodies flags in the Other Swift Flags build settings to get compile times for every function in your build report in Xcode, which can help you identify expressions which take long to process by the compiler and SourceKit. Detailed instructions can be found in this blog post.
Other than that I don't know of any other solutions.
One of the really nice solutions I had been using for quite some time now is using Build Time Analyzer for Swift tool to analyze my codebase and show a detailed list of all the methods and functions that take huge time to process and compile.
I would then refactor the necessary files and declarations and measure my results again. Repeat this until you have really nice and fast compilation time results.
There's also a nice list with advices on Swift compilation times.
I have seen a similar issue on an application with multiple storyboards, where, interestingly, Xcode had trouble just with one of the storyboards. Working on that storyboard would be really hard, with the CPU going full blast.
Our solution was to get to that storyboard an split it further into smaller storyboards. This can be easily done by selecting a few scenes and then Editor -> Refactor to Storyboard... on the menu.
This change made it much easier to work with the new smaller storyboards.

Time attendance algorithm

I've recently started to work on Time attendance software. People are using cards to check in and check out, but sometimes they check out before they check in and then some of them realize they made mistake and check in again. sometimes they check in instead of check out. I wrote an application that creates report and everything works fine when mistakes are simple, but sometimes people are just people and they check in for example 15 times.
I know my question is kinda complex and I doubt there is and answer but I was wondering if there is any algorithm which can determine such mistakes and can create decent report.
thanks in advance.
I think really if you are trying to have your software guess what the users intent was then you would need to base it on what the users schedule should be and what their expected check in/out cycle looks like
If its a workplace and the users are punching in their time and they work 8 hour shifts, you could try to be smart and flag checkins 7.5-8.5 hours apart as probably a check in that should have been a check out. Then you could flag back to back checkins 23+ hours apart as probably a missed check out on the previous shift. 16 hour differences would still probably be impossible to guess because they could be clocking out for a double, or changing their schedule and working an earlier shift the next day.
If this was for a college building you could probably at least say that back to back checkins that occur on separate calendar days were a missed checkout.

How do you reproduce bugs that occur sporadically?

We have a bug in our application that does not occur every time and therefore we don't know its "logic". I don't even get it reproduced in 100 times today.
Disclaimer: This bug exists and I've seen it. It's not a pebkac or something similar.
What are common hints to reproduce this kind of bug?
Analyze the problem in a pair and pair-read the code. Make notes of the problems you KNOW to be true and try to assert which logical preconditions must hold true for this happen. Follow the evidence like a CSI.
Most people instinctively say "add more logging", and this may be a solution. But for a lot of problems this just makes things worse, since logging can change timing-dependencies sufficiently to make the problem more or less frequent. Changing the frequency from 1 in 1000 to 1 in 1,000,000 will not bring you closer to the true source of the problem.
So if your logical reasoning does not solve the problem, it'll probably give you a few specifics you could investigate with logging or assertions in your code.
There is no general good answer to the question, but here is what I have found:
It takes a talent for this kind of thing. Not all developers are best suited for it, even if they are superstars in other areas. So know your team, who has a talent for it, and hope you can give them enough candy to get them excited about helping you out, even if it isn't their area.
Work backwards, and treat it like a scientific investigation. Start with the bug, what you see is wrong. Develop hypotheses about what could cause it (this is the creative/imaginative part, the art that not everyone has the talent for) - and it helps a lot to know how the code works. For each of those hypotheses (preferably sorted by what you think is most likely - again pure gut feel here), develop a test that tries to eliminate it as the cause, and test the hypothesis. Any given failure to meet a prediction doesn't mean the hypothesis is wrong. Test the hypothesis until it is confirmed to be wrong (although as it gets less likely you may want to move on to another hypothesis first, just don't discount this one until you have a definitive failure).
Gather as much data as you can during this process. Extensive logging and whatever else is applicable. Do not discount a hypothesis because you lack the data, rather remedy the lack of data. Quite often the inspiration for the right hypothesis comes from examining the data. Noticing something off in a stack trace, weird issue in a log, something missing that should be there in a database, etc.
Double check every assumption. So many times I have seen an issue not get fixed quickly because some general method call was not further investigated, so the problem was just assumed to be not applicable. "Oh that, that should be simple." (See point 1).
If you run out of hypotheses, that is generally caused by insufficient knowledge of the system (this is true even if you wrote every line of code yourself), and you need to run through and review code and gain additional insight into the system to come up with a new idea.
Of course, none of the above guarantees anything, but that is the approach that I have found gets results consistently.
Add some sort of logging or tracing. For example log the last X actions the user committed before causing the bug (only if you can set a condition to match bug).
It's quite common for programmers not to be able to reiterate a user-experienced crash simply because you have developed a certain workflow and habits in using the application that obviously goes around the bug.
At this frequency of 1/100, I'd say that the first thing to do is to handle exceptions and log anything anywhere or you could be spending another week hunting this bug.
Also make a priority list of potentially sensitive articulations and features in your project. For example :
1 - Multithreading
2 - Wild pointers/ loose arrays
3 - Reliance on input devices
etc.
This will help you segment areas that you can brute-force-until-break-again as suggested by other posters.
Since this is language-agnostic, I'll mention a few axioms of debugging.
Nothing a computer ever does is random. A 'random occurrence' indicates a as-yet-undiscovered pattern. Debugging begins with isolating the pattern. Vary individual elements and assess what makes a change in the behaviour of the bug.
Different user, same computer?
Same user, different computer?
Is the occurrence strongly periodic? Does rebooting change the periodicity?
FYI- I once saw a bug that was experienced by a single person. I literally mean person, not a user account. User A would never see the problem on their system, User B would sit down at that workstation, signed on as User A and could immediately reproduce the bug. There should be no conceivable way for the app to know the difference between the physical body in the chair. However-
The users used the app in different ways. User A habitually used a hotkey to to invoke a action and User B used an on-screen control. The difference in the user behaviour would cascade into a visible error a few actions later.
ANY difference that effects the behaviour of the bug should be investigated, even if it makes no sense.
There's a good chance your application is MTWIDNTBMT (Multi Threaded When It Doesn't Need To Be Multi Threaded), or maybe just multi-threaded (to be polite). A good way to reproduce sporadic errors in multi-threaded applications is to sprinkle code like this around (C#):
Random rnd = new Random();
System.Threading.Thread.Sleep(rnd.Next(2000));
and/or this:
for (int i = 0; i < 4000000000; i++)
{
// tight loop
}
to simulate threads completing their tasks at different times than usual or tying up the processor for long stretches.
I've inherited many buggy, multi-threaded apps over the years, and code like the above examples usually makes the sporadic errors occur much more frequently.
Add verbose logging. It will take multiple -- sometimes dozen(s) -- iterations to add enough logging to understand the scenario.
Now the problem is that if the problem is a race condition, which is likely if it doesn't reproduce reliably, so logging can change timing and the problem will stop happening. In this case do not log to a file, but keep a rotating buffer of the log in memory and only dump it on disk when you detect that the problem has occurred.
Edit: a little more thoughts: if this is a gui application run tests with a qa automation tool which allows you to replay macros. If this is a service-type app, try to come up with at least a guess as to what is happening and then programmatically create 'freak' usage patterns which would exercise the code that you suspect. Create higher than usual loads etc.
What development environment?
For C++, your best bet may be VMWare Workstation record/replay, see:
http://stackframe.blogspot.com/2007/04/workstation-60-and-death-of.html
Other suggestions include inspecting the stack trace, and careful code overview... there is really no silver bullet :)
Try to add code in your app to trace the bug automatically once it happens (or even alert you via mail / SMS)
log whatever you can so when it happens you can catch the right system state.
Another thing- try applying automated testing that can cover more territory than human based testing in a formed manner.. it's a long shot, but a good practice in general.
all the above, plus throw some brute force soft-robot at it that is semi random, and scater a lot of assert/verify (c/c++, probably similar in other langs) through the code
Tons of logging and careful code review are your only options.
These can be especially painful if the app is deployed and you can't adjust the logging. At that point, your only choice is going through the code with a fine-tooth comb and trying to reason about how the program could enter into the bad state (scientific method to the rescue!)
Often these kind of bugs are related to corrupted memory and for that reason they might not appear very often. You should try to run your software with some kind of memory profiler e.g., valgrind, to see if something goes wrong.
Let’s say I’m starting with a production application.
I typically add debug logging around the areas where I think the bug is occurring. I setup the logging statements to give me insight into the state of the application. Then I have the debug log level turned on and ask the user/operator(s) notify me of the time of the next bug occurrence. I then analyze the log to see what hints it gives about the state of the application and if that leads to a better understanding of what could be going wrong.
I repeat step 1 until I have a good idea of where I can start debugging the code in the debugger
Sometimes the number of iterations of the code running is key but other times it maybe the interaction of a component with an outside system (database, specific user machine, operating system, etc.). Take some time to setup a debug environment that matches the production environment as closely as possible. VM technology is a good tool for solving this problem.
Next I proceed via the debugger. This could include creating a test harness of some sort that puts the code/components in the state I’ve observed from the logs. Knowing how to setup conditional break points can save a lot of time, so get familiar with that and other features within your debugger.
Debug, debug , debug. If you’re going nowhere after a few hours, take a break and work on something unrelated for awhile. Come back with a fresh mind and perspective.
If you have gotten nowhere by now, go back to step 1 and make another iteration.
For really difficult problems you may have to resort to installing a debugger on the system where the bug is occurring. That combined with your test harness from step 4 can usually crack the really baffling issues.
Unit Tests. Testing a bug in the app is often horrendous because there is so much noise, so many variable factors. In general the bigger the (hay)stack, the harder it is to pinpoint the issue. Creatively extending your unit test framework to embrace edge cases can save hours or even days of sifting
Having said that there is no silver bullet. I feel your pain.
Add pre and post condition check in methods related to this bug.
You may have a look at Design by contract
Along with a lot of patience, a quiet prayer & cursing you would need:
a good mechanism for logging the user actions
a good mechanism for gathering the data state when the user performs some actions (state in application, database etc.)
Check the server environment (e.g. an anti-virus software running at a particular time etc.) & record the times of the error & see if you can find any trends
some more prayers & cursing...
HTH.
Assuming you're on Windows, and your "bug" is a crash or some sort of corruption in unmanaged code (C/C++), then take a look at Application Verifier from Microsoft. The tool has a number of stops that can be enabled to verify things during runtime. If you have an idea of the scenario where your bug occurs, then try to run through the scenario (or a stress version of the scenario) with AppVerifer running. Make sure to either turn on pageheap in AppVerifier, or consider compiling your code with the /RTCcsu switch (see http://msdn.microsoft.com/en-us/library/8wtf2dfz.aspx for more information).
"Heisenbugs" require great skills to diagnose, and if you want help from people here you have to describe this in much more detail, and patiently listen to various tests and checks, report result here, and iterate this till you solve it (or decide it is too expensive in terms of resources).
You will probably have to tell us your actual situation, language, DB, operative system, workload estimate, time of the day it happened in the past, and a myriad of other things, list tests you did already, how they went, and be ready to do more and share the results.
And this will not guarantee that we collectively can find it, either...
I'd suggest to write down all things that user has been doing. If you have lets say 10 such bug reports You can try to find something that connects them.
Read the stack trace carefully and try to guess what could be happened;
then try to trace\log every line of code that potentially can cause trouble.
Keep your focus on disposing resources; many sneaky sporadical bugs i found were related to close\dispose things :).
For .NET projects You can use Elmah (Error Logging Modules and Handlers) to monitor you application for un-caught exceptions, it's very simple to install and provides a very nice interface to browse unknown errors
http://code.google.com/p/elmah/
This saved me just today in catching a very random error that was occuring during a registration process
Other than that I can only recommend trying to get as much information from your users as possible and having a thorough understanding of the project workflow
They mostly come out at night....
mostly
The team that I work with has enlisted the users in recording their time they spend in our app with CamStudio when we've got a pesky bug to track down. It's easy to install and for them to use, and makes reproducing those nagging bugs much easier, since you can watch what the users are doing. It also has no relationship to the language you're working in, since it's just recording the windows desktop.
However, this route seems to be viable only if you're developing corporate apps and have good relationships with your users.
This varies (as you say), but some of the things that are handy with this can be
immediately going into the debugger when the problem occurs and dumping all the threads (or the equivalent, such as dumping the core immediately or whatever.)
running with logging turned on but otherwise entirely in release/production mode. (This is possible in some random environments like c and rails but not many others.)
do stuff to make the edge conditions on the machine worse... force low memory / high load / more threads / serving more requests
Making sure that you're actually listening to what the users encountering the problem are actually saying. Making sure that they're actually explaining the relevant details. This seems to be the one that breaks people in the field a lot. Trying to reproduce the wrong problem is boring.
Get used to reading assembly that was produced by optimizing compilers. This seems to stop people sometimes, and it isn't applicable to all languages/platforms, but it can help
Be prepared to accept that it is your (the developer's) fault. Don't get into the trap of insisting the code is perfect.
sometimes you need to actually track the problem down on the machine it is happening on.
#p.marino - not enough rep to comment =/
tl;dr - build failures due to time of day
You mentioned time of day and that caught my eye. Had a bug once were someone stayed later at work on night, tried to build and commit before they left and kept getting a failure. They eventually gave up and went home. When they caught in the next morning it built fine, they committed (probably should have been more suspiscious =] ) and the build worked for everyone. A week or two later someone stayed late and had an unexpected build failure. Turns out there was a bug in the code that made any build after 7PM break >.>
We also found a bug in one seldom used corner of the project this january that caused problems marshalling between different schemas because we were not accounting for the different calendars being 0 AND 1 month based. So if no one had messed with that part of the project we wouldn't have possibly found the bug until jan. 2011
These were easier to fix than threading issues, but still interesting I think.
hire some testers!
This has worked for really weird heisenbugs.
(I'd also recommend getting a copy of "Debugging" by Dave Argans, these ideas are partly derived form using his ideas!)
(0) Check the ram of the system using something like Memtest86!
The whole system exhibits the problem, so make a test jig that exercises the whole thing.
Say it's a server side thing with a GUI, you run the whole thing with a GUI test framework doing the necessary input to provoke the problem.
It doesn't fail 100% of the time, so you have to make it fail more often.
Start by cutting the system in half ( binary chop)
worse case, you have to remove sub-systems one at a time.
stub them out if they can't be commented out.
See if it still fails. Does it fail more often ?
Keep proper test records, and only change one variable at a time!
Worst case you use the jig and you test for weeks to get meaningful statistics. This is HARD; but remember, the jig is doing the work.
I've got No threads and only one process, and I don't talk to hardware
If the system has no threads, no communicating processes and contacts no hardware; it's tricky; heisenbugs are generally synchronization, but in the no-thread no processes case it's more likely to be uninitialized data, or data used after being released, either on the heap or the stack. Try to use a checker like valgrind.
For threaded/multi-process problems:
Try running it on a different number of CPU's. If it's running on 1, try on 4! Try forcing a 4-computer system onto 1.
It'll mostly ensure things happen one at a time.
If there are threads or communicating processes this can shake out bugs.
If this is not helping but you suspect it's synchronization or threading, try changing the OS time-slice size.
Make it as fine as your OS vendor allows!
Sometimes this has made race conditions happen almost every time!
Obversely, try going slower on the timeslices.
Then you set the test jig running with debugger(s) attached all over the place and wait for the test jig to stop on a fault.
If all else fails, put the hardware in the freezer and run it there. The timing of everything will be shifted.
Debugging is hard and time consuming especially if you are unable to deterministically reproduce the problem. My advice to you is to find out the steps to reproduce it deterministically (not just sometimes).
There has been a lot of research in the field of failure reproduction in the past years and is still very active. Record&Replay techniques have been (so far) the research direction of most researchers. This is what you need to do:
1) Analyze the source code and determine what are the sources of non-determinism in the application, that is, what are the aspects that may take your application through different execution paths (e.g. user input, OS signals)
2) Log them in the next time you execute the application
3) When your application fails again, you have the steps-to-reproduce the failure in your log.
If your log still does not reproduce the failure, then you are dealing with a concurrency bug. In that case, you should take a look at how your application accesses shared variables. Do not attempt to record the accesses to shared variables, because you would be logging too much data, thereby causing severe slowdowns and large logs. Unfortunately, there is not much I can say that would help you to reproduce concurrency bugs, because research still has a long way to go in this subject. The best I can do is to provide a reference to the most recent advance (so far) in the topic of deterministic replay of concurrency bugs:
http://www.gsd.inesc-id.pt/~nmachado/software/Symbiosis_Tutorial.html
Best regards
Use an enhanced crash reporter. In the Delphi environment, we have EurekaLog and MadExcept. Other tools exist in other environments. Or you can diagnose the core dump. You're looking for the stack trace, which will show you where it's blowing up, how it got there, what's in memory, etc.. It's also useful to have a screenshot of the app, if it's a user-interaction thing. And info about the machine that it crashed on (OS version and patch, what else is running at the time, etc..) Both of the tools that I mentioned can do this.
If it's something that happens with a few users but you can't reproduce it, and they can, go sit with them and watch. If it's not apparent, switch seats - you "drive", and they tell you what to do. You'll uncover the subtle usability issues that way. double-clicks on a single-click button, for example, initiating re-entrancy in the OnClick event. That sort of thing. If the users are remote, use WebEx, Wink, etc., to record them crashing it, so you can analyze the playback.

What's the toughest bug you ever found and fixed? [closed]

As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 11 years ago.
Locked. This question and its answers are locked because the question is off-topic but has historical significance. It is not currently accepting new answers or interactions.
What made it hard to find? How did you track it down?
Not close enough to close but see also
https://stackoverflow.com/questions/175854/what-is-the-funniest-bug-youve-ever-experienced
A jpeg parser, running on a surveillance camera, which crashed every time the company's CEO came into the room.
100% reproducible error.
I kid you not!
This is why:
For you who doesn't know much about JPEG compression - the image is kind of broken down into a matrix of small blocks which then are encoded using magic etc.
The parser choked when the CEO came into the room, because he always had a shirt with a square pattern on it, which triggered some special case of contrast and block boundary algorithms.
Truly classic.
This didn't happen to me, but a friend told me about it.
He had to debug a app which would crash very rarely. It would only fail on Wednesdays -- in September -- after the 9th. Yes, 362 days of the year, it was fine, and three days out of the year it would crash immediately.
It would format a date as "Wednesday, September 22 2008", but the buffer was one character too short -- so it would only cause a problem when you had a 2 digit DOM on a day with the longest name in the month with the longest name.
This requires knowing a bit of Z-8000 assembler, which I'll explain as we go.
I was working on an embedded system (in Z-8000 assembler). A different division of the company was building a different system on the same platform, and had written a library of functions, which I was also using on my project. The bug was that every time I called one function, the program crashed. I checked all my inputs; they were fine. It had to be a bug in the library -- except that the library had been used (and was working fine) in thousands of POS sites across the country.
Now, Z-8000 CPUs have 16 16-bit registers, R0, R1, R2 ...R15, which can also be addressed as 8 32-bit registers, named RR0, RR2, RR4..RR14 etc. The library was written from scratch, refactoring a bunch of older libraries. It was very clean and followed strict programming standards. At the start of each function, every register that would be used in the function was pushed onto the stack to preserve its value. Everything was neat & tidy -- they were perfect.
Nevertheless, I studied the assembler listing for the library, and I noticed something odd about that function --- At the start of the function, it had PUSH RR0 / PUSH RR2 and at the end to had POP RR2 / POP R0. Now, if you didn't follow that, it pushed 4 values on the stack at the start, but only removed 3 of them at the end. That's a recipe for disaster. There an unknown value on the top of the stack where return address needed to be. The function couldn't possibly work.
Except, may I remind you, that it WAS working. It was being called thousands of times a day on thousands of machines. It couldn't possibly NOT work.
After some time debugging (which wasn't easy in assembler on an embedded system with the tools of the mid-1980s), it would always crash on the return, because the bad value was sending it to a random address. Evidently I had to debug the working app, to figure out why it didn't fail.
Well, remember that the library was very good about preserving the values in the registers, so once you put a value into the register, it stayed there. R1 had 0000 in it. It would always have 0000 in it when that function was called. The bug therefore left 0000 on the stack. So when the function returned it would jump to address 0000, which just so happened to be a RET, which would pop the next value (the correct return address) off the stack, and jump to that. The data perfectly masked the bug.
Of course, in my app, I had a different value in R1, so it just crashed....
This was on Linux but could have happened on virtually any OS. Now most of you are probably familiar with the BSD socket API. We happily use it year after year, and it works.
We were working on a massively parallel application that would have many sockets open. To test its operation we had a testing team that would open hundreds and sometimes over a thousand connections for data transfer. With the highest channel numbers our application would begin to show weird behavior. Sometimes it just crashed. The other time we got errors that simply could not be true (e.g. accept() returning the same file descriptor on subsequent calls which of course resulted in chaos.)
We could see in the log files that something went wrong, but it was insanely hard to pinpoint. Tests with Rational Purify said nothing was wrong. But something WAS wrong. We worked on this for days and got increasingly frustrated. It was a showblocker because the already negotiated test would cause havoc in the app.
As the error only occured in high load situations, I double-checked everything we did with sockets. We had never tested high load cases in Purify because it was not feasible in such a memory-intensive situation.
Finally (and luckily) I remembered that the massive number of sockets might be a problem with select() which waits for state changes on sockets (may read / may write / error). Sure enough our application began to wreak havoc exactly the moment it reached the socket with descriptor 1025. The problem is that select() works with bit field parameters. The bit fields are filled by macros FD_SET() and friends which DON'T CHECK THEIR PARAMETERS FOR VALIDITY.
So everytime we got over 1024 descriptors (each OS has its own limit, Linux vanilla kernels have 1024, the actual value is defined as FD_SETSIZE), the FD_SET macro would happily overwrite its bit field and write garbage into the next structure in memory.
I replaced all select() calls with poll() which is a well-designed alternative to the arcane select() call, and high load situations have never been a problem everafter. We were lucky because all socket handling was in one framework class where 15 minutes of work could solve the problem. It would have been a lot worse if select() calls had been sprinkled all over of the code.
Lessons learned:
even if an API function is 25 years old and everybody uses it, it can have dark corners you don't know yet
unchecked memory writes in API macros are EVIL
a debugging tool like Purify can't help with all situations, especially when a lot of memory is used
Always have a framework for your application if possible. Using it not only increases portability but also helps in case of API bugs
many applications use select() without thinking about the socket limit. So I'm pretty sure you can cause bugs in a LOT of popular software by simply using many many sockets. Thankfully, most applications will never have more than 1024 sockets.
Instead of having a secure API, OS developers like to put the blame on the developer. The Linux select() man page says
"The behavior of these macros is
undefined if a descriptor value is
less than zero or greater than or
equal to FD_SETSIZE, which is normally
at least equal to the maximum number
of descriptors supported by the
system."
That's misleading. Linux can open more than 1024 sockets. And the behavior is absolutely well defined: Using unexpected values will ruin the application running. Instead of making the macros resilient to illegal values, the developers simply overwrite other structures. FD_SET is implemented as inline assembly(!) in the linux headers and will evaluate to a single assembler write instruction. Not the slightest bounds checking happening anywhere.
To test your own application, you can artificially inflate the number of descriptors used by programmatically opening FD_SETSIZE files or sockets directly after main() and then running your application.
Thorsten79
Mine was a hardware problem...
Back in the day, I used a DEC VaxStation with a big 21" CRT monitor. We moved to a lab in our new building, and installed two VaxStations in opposite corners of the room. Upon power-up,my monitor flickered like a disco (yeah, it was the 80's), but the other monitor didn't.
Okay, swap the monitors. The other monitor (now connected to my VaxStation) flickered, and my former monitor (moved across the room) didn't.
I remembered that CRT-based monitors were susceptable to magnetic fields. In fact, they were -very- susceptable to 60 Hz alternating magnetic fields. I immediately suspected that something in my work area was generating a 60 Hz alterating magnetic field.
At first, I suspected something in my work area. Unfortunately, the monitor still flickered, even when all other equipment was turned off and unplugged. At that point, I began to suspect something in the building.
To test this theory, we converted the VaxStation and its 85 lb monitor into a portable system. We placed the entire system on a rollaround cart, and connected it to a 100 foot orange construction extension cord. The plan was to use this setup as a portable field strength meter,in order to locate the offending piece of equipment.
Rolling the monitor around confused us totally. The monitor flickered in exactly one half of the room, but not the other side. The room was in the shape of a square, with doors in opposite corners, and the monitor flickered on one side of a diagnal line connecting the doors, but not on the other side. The room was surrounded on all four sides by hallways. We pushed the monitor out into the hallways, and the flickering stopped. In fact, we discovered that the flicker only occurred in one triangular-shaped half of the room, and nowhere else.
After a period of total confusion, I remembered that the room had a two-way ceiling lighting system, with light switches at each door. At that moment, I realized what was wrong.
I moved the monitor into the half of the room with the problem, and turned the ceiling lights off. The flicker stopped. When I turned the lights on, the flicker resumed. Turning the lights on or off from either light switch, turned the flicker on or off within half of the room.
The problem was caused by somebody cutting corners when they wired the ceiling lights. When wiring up a two-way switch on a lighting circuit, you run a pair of wires between the SPDT switch contacts, and a single wire from the common on one switch, through the lights, and over to the common on the other switch.
Normally, these wires are bundeled together. They leave as a group from one switchbox, run to the overhead ceiling fixture, and on to the other box. The key idea, is that all of the current-carrying wires are bundeled together.
When the building was wired, the single wire between the switches and the light was routed through the ceiling, but the wires travelling between the switches were routed through the walls.
If all of the wires ran close and parallel to each other, then the magnetic field generated by the current in one wire was cancelled out by the magnetic field generated by the equal and opposite current in a nearby wire. Unfortunately, the way that the lights were actually wired meant that one half of the room was basically inside a large, single-turn transformer primary. When the lights were on, the current flowed in a loop, and the poor monitor was basically sitting inside of a large electromagnet.
Moral of the story: The hot and neutral lines in your AC power wiring are next to each other for a good reason.
Now, all I had to do was to explain to management why they had to rewire part of their new building...
A bug where you come across some code, and after studying it you conclude, "There's no way this could have ever worked!" and suddenly it stops working though it always did work before.
One of the products I helped build at my work was running on a customer site for several months, collecting and happily recording each event it received to a SQL Server database. It ran very well for about 6 months, collecting about 35 million records or so.
Then one day our customer asked us why the database hadn't updated for almost two weeks. Upon further investigation we found that the database connection that was doing the inserts had failed to return from the ODBC call. Thankfully the thread that does the recording was separated from the rest of the threads, allowing everything but the recording thread to continue functioning correctly for almost two weeks!
We tried for several weeks on end to reproduce the problem on any machine other than this one. We never could reproduce the problem. Unfortunately, several of our other products then began to fail in about the same manner, none of which have their database threads separated from the rest of their functionality, causing the entire application to hang, which then had to be restarted by hand each time they crashed.
Weeks of investigation turned into several months and we still had the same symptoms: full ODBC deadlocks in any application that we used a database. By this time our products are riddled with debugging information and ways to determine what went wrong and where, even to the point that some of the products will detect the deadlock, collect information, email us the results, and then restart itself.
While working on the server one day, still collecting debugging information from the applications as they crashed, trying to figure out what was going on, the server BSoD on me. When the server came back online, I opened the minidump in WinDbg to figure out what the offending driver was. I got the file name and traced it back to the actual file. After examining the version information in the file, I figured out it was part of the McAfee anti-virus suite installed on the computer.
We disabled the anti-virus and haven't had a single problem since!!
I just want to point out a quite common and nasty bug that can happens in this google-area time:
code pasting and the infamous minus
That is when you copy paste some code with an minus in it, instead of a regular ASCII character hyphen-minus ('-').
Plus, minus(U+2212), Hyphen-Minus(U+002D)
Now, even though the minus is supposedly rendered as longer than the hyphen-minus, on certain editors (or on a DOS shell windows), depending on the charset used, it is actually rendered as a regular '-' hyphen-minus sign.
And... you can spend hours trying to figure why this code does not compile, removing each line one by one, until you find the actual cause!
May be not the toughest bug out there, but frustrating enough ;)
(Thank you ShreevatsaR for spotting the inversion in my original post - see comments)
The first was that our released product exhibited a bug, but when I tried to debug the problem, it didn't occur. I thought this was a "release vs. debug" thing at first -- but even when I compiled the code in release mode, I couldn't reproduce the problem. I went to see if any other developer could reproduce the problem. Nope. After much investigation (producing a mixed assembly code / C code listing) of the program output and stepping through the assembly code of the released product (yuck!), I found the offending line. But the line looked just fine to me! I then had to lookup what the assembly instructions did -- and sure enough the wrong assembly instruction was in the released executable. Then I checked the executable that my build environment produced -- it had the correct assembly instruction. It turned out that the build machine somehow got corrupt and produced bad assembly code for only one instruction for this application. Everything else (including previous versions of our product) produced identical code to other developers machines. After I showed my research to the software manager, we quickly re-built our build machine.
Somewhere deep in the bowels of a networked application was the line (simplified):
if (socket = accept() == 0)
return false;
//code using the socket()
What happened when the call succeeded? socket was set to 1. What does send() do when given a 1? (such as in:
send(socket, "mystring", 7);
It prints to stdout... this I found after 4 hours of wondering why, with all my printf()s taken out, my app was printing to the terminal window instead of sending the data over the network.
With FORTRAN on a Data General minicomputer in the 80's we had a case where the compiler caused a constant 1 (one) to be treated as 0 (zero). It happened because some old code was passing a constant of value 1 to a function which declared the variable as a FORTRAN parameter, which meant it was (supposed to be) immutable. Due to a defect in the code we did an assignment to the parameter variable and the compiler gleefully changed the data in the memory location it used for a constant 1 to 0.
Many unrelated functions later we had code that did a compare against the literal value 1 and the test would fail. I remember staring at that code for the longest time in the debugger. I would print out the value of the variable, it would be 1 yet the test 'if (foo .EQ. 1)' would fail. It took me a long time before I thought to ask the debugger to print out what it thought the value of 1 was. It then took a lot of hair pulling to trace back through the code to find when the constant 1 became 0.
I had a bug in a console game that occurred only after you fought and won a lengthy boss-battle, and then only around 1 time in 5. When it triggered, it would leave the hardware 100% wedged and unable to talk to outside world at all.
It was the shyest bug I've ever encountered; modifying, automating, instrumenting or debugging the boss-battle would hide the bug (and of course I'd have to do 10-20 runs to determine that the bug had hidden).
In the end I found the problem (a cache/DMA/interrupt race thing) by reading the code over and over for 2-3 days.
Not very tough, but I laughed a lot when it was uncovered.
When I was maintaining a 24/7 order processing system for an online shop, a customer complained that his order was "truncated". He claimed that while the order he placed actually contained N positions, the system accepted much less positions without any warning whatsoever.
After we traced order flow through the system, the following facts were revealed. There was a stored procedure responsible for storing order items in database. It accepted a list of order items as string, which encoded list of (product-id, quantity, price) triples like this:
"<12345, 3, 19.99><56452, 1,
8.99><26586, 2, 12.99>"
Now, the author of stored procedure was too smart to resort to anything like ordinary parsing and looping. So he directly transformed the string into SQL multi-insert statement by replacing "<" with "insert into ... values (" and ">" with ");". Which was all fine and dandy, if only he didn't store resulting string in a varchar(8000) variable!
What happened is that his "insert ...; insert ...;" was truncated at 8000th character and for that particular order the cut was "lucky" enough to happen right between inserts, so that truncated SQL remained syntactically correct.
Later I found out the author of sp was my boss.
This is back when I thought that C++ and digital watches were pretty neat...
I got a reputation for being able to solve difficult memory leaks. Another team had a leak they couldn't track down. They asked me to investigate.
In this case, they were COM objects. In the core of the system was a component that gave out many twisty little COM objects that all looked more or less the same. Each one was handed out to many different clients, each of which was responsible for doing AddRef() and Release() the same number of times.
There wasn't a way to automatically calculate who had called each AddRef, and whether they had Released.
I spent a few days in the debugger, writing down hex addresses on little pieces of paper. My office was covered with them. Finally I found the culprit. The team that asked me for help was very grateful.
The next day I switched to a GC'd language.*
(*Not actually true, but would be a good ending to the story.)
Bryan Cantrill of Sun Microsystems gave an excellent Google Tech Talk on a bug he tracked down using a tool he helped develop called dtrace.
The The Tech Talk is funny, geeky, informative, and very impressive (and long, about 78 minutes).
I won't give any spoilers here on what the bug was but he starts revealing the culprit at around 53:00.
While testing some new functionality that I had recently added to a trading application, I happened to notice that the code to display the results of a certain type of trade would never work properly. After looking at the source control system, it was obvious that this bug had existed for at least a year, and I was amazed that none of the traders had ever spotted it.
After puzzling for a while and checking with a colleague, I fixed the bug and went on testing my new functionality. About 3 minutes later, my phone rang. On the other end of the line was an irate trader who complained that one of his trades wasn’t showing correctly.
Upon further investigation, I realized that the trader had been hit with the exact same bug I had noticed in the code 3 minutes earlier. This bug had been lying around for a year, just waiting for a developer to come along and spot it so that it could strike for real.
This is a good example of a type of bug known as a Schroedinbug. While most of us have heard about these peculiar entities, it is an eerie feeling when you actually encounter one in the wild.
The two toughest bugs that come to mind were both in the same type of software, only one was in the web-based version, and one in the windows version.
This product is a floorplan viewer/editor. The web-based version has a flash front-end that loads the data as SVG. Now, this was working fine, only sometimes the browser would hang. Only on a few drawings, and only when you wiggled the mouse over the drawing for a bit. I narrowed the problem down to a single drawing layer, containing 1.5 MB of SVG data. If I took only a subsection of the data, any subsection, the hang didn't occur. Eventually it dawned on me that the problem probably was that there were several different sections in the file that in combination caused the bug. Sure enough, after randomly deleting sections of the layer and testing for the bug, I found the offending combination of drawing statements. I wrote a workaround in the SVG generator, and the bug was fixed without changing a line of actionscript.
In the same product on the windows side, written in Delphi, we had a comparable problem. Here the product takes autocad DXF files, imports them to an internal drawing format, and renders them in a custom drawing engine. This import routine isn't particularly efficient (it uses a lot of substring copying), but it gets the job done. Only in this case it wasn't. A 5 megabyte file generally imports in 20 seconds, but on one file it took 20 minutes, because the memory footprint ballooned to a gigabyte or more. At first it seemed like a typical memory leak, but memory leak tools reported it clean, and manual code inspection turned up nothing either. The problem turned out to be a bug in Delphi 5's memory allocator. In some conditions, which this particular file was duly recreating, it would be prone to severe memory fragmentation. The system would keep trying to allocate large strings, and find nowhere to put them except above the highest allocated memory block. Integrating a new memory allocation library fixed the bug, without changing a line of import code.
Thinking back, the toughest bugs seem to be the ones whose fix involves changing a different part of the system than the one where the problem occurs.
When the client's pet bunny rabbit gnawed partway through the ethernet cable. Yes. It was bad.
Had a bug on a platform with a very bad on device debugger.
We would get a crash on the device if we added a printf to the code. It then would crash at a different spot than the location of the printf. If we moved the printf, the crash would ether move or disappear. In fact, if we changed that code by reordering some simple statements, the crash would happen some where unrelated to the code we did change.
It turns out there was a bug in the relocator for our platform. the relocator was not zero initializing the ZI section but rather using the relocation table to initialze the values. So any time the relocation table changed in the binary the bug would move. So simply added a printf would change the relocation table an there for the bug.
This happened to me on the time I worked on a computer store.
One customer came one day into shop and tell us that his brand new computer worked fine on evenings and night, but it does not work at all on midday or late morning.
The trouble was that mouse pointer does not move at that times.
The first thing we did was changing his mouse by a new one, but the trouble were not fixed. Of course, both mouses worked on store with no fault.
After several tries, we found the trouble was with that particular brand and model of mouse.
Customer workstation was close to a very big window, and at midday the mouse was under direct sunlight.
Its plastic was so thin that under that circumstances, it became translucent and sunlight prevented optomechanical wheel for working :|
My team inherited a CGI-based, multi-threaded C++ web app. The main platform was Windows; a distant, secondary platform was Solaris with Posix threads. Stability on Solaris was a disaster, for some reason. We had various people who looked at the problem for over a year, off and on (mostly off), while our sales staff successfully pushed the Windows version.
The symptom was pathetic stability: a wide range of system crashes with little rhyme or reason. The app used both Corba and a home-grown protocol. One developer went so far as to remove the entire Corba subsystem as a desperate measure: no luck.
Finally, a senior, original developer wondered aloud about an idea. We looked into it and eventually found the problem: on Solaris, there was a compile-time (or run-time?) parameter to adjust the stack size for the executable. It was set incorrectly: far too small. So, the app was running out of stack and printing stack traces that were total red herrings.
It was a true nightmare.
Lessons learned:
Brainstorm, brainstorm, brainstorm
If something is going nuts on a different, neglected platform, it is probably an attribute of the environment platform
Beware of problems that are transferred from developers who leave the team. If possible, contact the previous people on personal basis to garner info and background. Beg, plead, make a deal. The loss of experience must be minimized at all costs.
Adam Liss's message above talking about the project we both worked on, reminded me of a fun bug I had to deal with. Actually, it wasn't a bug, but we'll get to that in a minute.
Executive summary of the app in case you haven't seen Adam message yet: sales-force automation software...on laptops...end of the day they dialed up ...to synchronize with the Mother database.
One user complained that every time he tried to dial in, the application would crash. The customer support folks went through all their usually over-the-phone diagnostic tricks, and they found nothing. So, they had to relent to the ultimate: have the user FedEx the laptop to our offices. (This was a very big deal, as each laptop's local database was customized to the user, so a new laptop had to be prepared, shipped to the user for him to use while we worked on his original, then we had to swap back and have him finally sync the data on first original laptop).
So, when the laptop arrived, it was given to me to figure out the problem. Now, syncing involved hooking up the phone line to the internal modem, going to the "Communication" page of our app, and selecting a phone number from a Drop-down list (with last number used pre-selected). The numbers in the DDL were part of the customization, and were basically, the number of the office, the number of the office prefixed with "+1", the number of the office prefixed with "9,,," in case they were calling from an hotel etc.
So, I click the "COMM" icon, and pressed return. It dialed in, it connected to a modem -- and then immediately crashed. I tired a couple more times. 100% repeatability.
So, a hooked a data scope between the laptop & the phone line, and looked at the data going across the line. It looked rather odd... The oddest part was that I could read it!
The user had apparently wanted to use his laptop to dial into a local BBS system, and so, change the configuration of the app to use the BBS's phone number instead of the company's. Our app was expecting our proprietary binary protocol -- not long streams of ASCII text. Buffers overflowed -- KaBoom!
The fact that a problem dialing in started immediately after he changed the phone number, might give the average user a clue that it was the cause of the problem, but this guy never mentioned it.
I fixed the phone number, and sent it back to the support team, with a note electing the guy the "Bonehead user of the week". (*)
(*) OkOkOk... There's probably a very good chance what actually happened in that the guy's kid, seeing his father dial in every night, figured that's how you dial into BBS's also, and changed the phone number sometime when he was home alone with the laptop. When it crashed, he didn't want to admit he touched the laptop, let alone broke it; so he just put it away, and didn't tell anyone.
It was during my diploma thesis. I was writing a program to simulate the effect of high intensity laser on a helium atom using FORTRAN.
One test run worked like this:
Calculate the intial quantum state using program 1, about 2 hours.
run the main simulation on the data from the first step, for the most simple cases about 20 to 50 hours.
then analyse the output with a third program in order to get meaningful values like energy, tork, momentum
These should be constant in total, but they weren't. They did all kinds of weird things.
After debugging for two weeks I went berserk on the logging and logged every variable in every step of the simulation including the constants.
That way I found out that I wrote over an end of an array, which changed a constant!
A friend said he once changed the literal 2 with such a mistake.
A deadlock in my first multi-threaded program!
It was very tough to find it because it happened in a thread pool. Occasionally a thread in the pool would deadlock but the others would still work. Since the size of the pool was much greater than needed it took a week or two to notice the first symptom: application completely hung.
I have spent hours to days debugging a number of things that ended up being fixable with literally just a couple characters.
Some various examples:
ffmpeg has this nasty habit of producing a warning about "brainfart cropping" (referring to a case where in-stream cropping values are >= 16) when the crop values in the stream were actually perfectly valid. I fixed it by adding three characters: "h->".
x264 had a bug where in extremely rare cases (one in a million frames) with certain options it would produce a random block of completely the wrong color. I fixed the bug by adding the letter "O" in two places in the code. Turned out I had mispelled the name of a #define in an earlier commit.
My first "real" job was for a company that wrote client-server sales-force automation software. Our customers ran the client app on their (15-pound) laptops, and at the end of the day they dialed up to our unix servers to synchronize with the Mother database. After a series of complaints, we found that an astronomical number of calls were dropping at the very beginning, during authentication.
After weeks of debugging, we discovered that the authentication always failed if the incoming call was answered by a getty process on the server whose Process ID contained an even number followed immediately by a 9. Turns out the authentication was a homebrew scheme that depended on an 8-character string representation of the PID; a bug caused an offending PID to crash the getty, which respawned with a new PID. The second or third call usually found an acceptable PID, and automatic redial made it unnecessary for the customers to intervene, so it wasn't considered a significant problem until the phone bills arrived at the end of the month.
The "fix" (ahem) was to convert the PID to a string representing its value in octal rather than decimal, making it impossible to contain a 9 and unnecessary to address the underlying problem.
Basically, anything involving threads.
I held a position at a company once in which I had the dubious distinction of being one of the only people comfortable enough with threading to debug nasty issues. The horror. You should have to get some kind of certification before you're allowed to write threaded code.
I heard about a classic bug back in high school; a terminal that you could only log into if you sat in the chair in front of it. (It would reject your password if you were standing.)
It reproduced pretty reliably for most people; you could sit in the chair, log in, log out... but if you stand up, you're denied, every time.
Eventually it turned out some jerk had swapped a couple of adjacent keys on the keyboard, E/R and C/V IIRC, and when you sat down, you touch-typed and got in, but when you stood, you had to hunt 'n peck, so you looked at the incorrent labels and failed.
While I don't recall a specific instance, the toughest category are those bugs which only manifest after the system has been running for hours or days, and when it goes down, leaves little or no trace of what caused the crash. What makes them particularly bad is that no matter how well you think you've reasoned out the cause, and applied the appropriate fix to remedy it, you'll have to wait for another few hours or days to get any confidence at all that you've really nailed it.
Our network interface, a DMA-capable ATM card, would very occasionally deliver corrupted data in received packets. The AAL5 CRC had checked out as correct when the packet came in off the wire, yet the data DMAd to memory would be incorrect. The TCP checksum would generally catch it, but back in the heady days of ATM people were enthused about running native applications directly on AAL5, dispensing with TCP/IP altogether. We eventually noticed that the corruption only occurred on some models of the vendor's workstation (who shall remain nameless), not others.
By calculating the CRC in the driver software we were able to detect the corrupted packets, at the cost of a huge performance hit. While trying to debug we noticed that if we just stored the packet for a while and went back to look at it later, the data corruption would magically heal itself. The packet contents would be fine, and if the driver calculated the CRC a second time it would check out ok.
We'd found a bug in the data cache of a shipping CPU. The cache in this processor was not coherent with DMA, requiring the software to explicitly flush it at the proper times. The bug was that sometimes the cache didn't actually flush its contents when told to do so.

Resources