Laravel 5.4.
I want to set a session when an user try to login. I found I can use a login function in my LoginController.php.
My code :
public function login(Request $request)
{
//Set session as 'login'
Session::put('last_auth', 'login');
}
It's correctly set my session but it doesn't continue the login and i get a blank page.
How can I say to my function to continue the login after set my session ?
Thanks
if you want override original laravel default login function, you can put this into Auth\LoginController, and remember to import use Illuminate\Http\Request;
public function login(Request $request)
{
// Here is your customized code
Session::put('last_auth', 'login');
$this->validateLogin($request);
// If the class is using the ThrottlesLogins trait, we can automatically throttle
// the login attempts for this application. We'll key this by the username and
// the IP address of the client making these requests into this application.
if ($this->hasTooManyLoginAttempts($request)) {
$this->fireLockoutEvent($request);
return $this->sendLockoutResponse($request);
}
if ($this->attemptLogin($request)) {
return $this->sendLoginResponse($request);
}
// If the login attempt was unsuccessful we will increment the number of attempts
// to login and redirect the user back to the login form. Of course, when this
// user surpasses their maximum number of attempts they will get locked out.
$this->incrementLoginAttempts($request);
return $this->sendFailedLoginResponse($request);
}
and here is register function
Import use Illuminate\Auth\Events\Registered; and add:
public function register(Request $request)
{
$this->validator($request->all())->validate();
event(new Registered($user = $this->create($request->all())));
$this->guard()->login($user);
return $this->registered($request, $user)
?: redirect($this->redirectPath());
}
Related
I'm trying to implement my own login/logout with passport in a new Controller.
class AuthController extends AccessTokenController
{
use AuthenticatesUsers;
.
.
My login methods works fine:
public function login(ServerRequestInterface $request)
{
if (!auth()->attempt([
'email' => $request->getParsedBody()['email'],
'password' => $request->getParsedBody()['password']
])) {
return response()->json('failed attempt...');
}
auth()->login(User::where('id', Auth::user()->id)->first());
.
.
// I can access auth()->user() here just fine ..
}
But I can't access the authenticated user in the logout method so I can get his tokens and delete them.
public function logout()
{
//I can't access the authenticated user here
return auth()->user();
//return response()->json('Logged out successfully', 200);
}
What am I doing wrong?
Note: I left out anything in the login method that is related to issuing a token because it's not related to the question ..
Update: my routes/api.php
Route::post('register', 'Auth\RegisterController#register');
Route::post('login', 'Auth\AuthController#login');
Route::post('logout', 'Auth\AuthController#logout');
if you are using api then you should send authorization header else it should work for session based authentication
Then you can access the authenticated user using the request
public function logout(Request $request)
{
return $request->user(); //the user that made the request (the authenticated user)
}
Or:
public function logout(Request $request)
{
return Auth::user(); //the user that made the request (the authenticated user)
}
In Laravel 5.8 the Auth\LoginController is just:
class LoginController extends Controller
{
/*
|--------------------------------------------------------------------------
| Login Controller
|--------------------------------------------------------------------------
|
| This controller handles authenticating users for the application and
| redirecting them to your home screen. The controller uses a trait
| to conveniently provide its functionality to your applications.
|
*/
use AuthenticatesUsers;
/**
* Where to redirect users after login.
*
* #var string
*/
protected $redirectTo = '/my-team';
/**
* Create a new controller instance.
*
* #return void
*/
public function __construct()
{
$this->middleware('guest')->except('logout');
}
}
On login I want to perform some custom actions for the user, but I can't figure out where I can place this code. The documentation doesn't seem to help.
Is there a method I can overwrite/extend with my own?
Laravel 5.2 used to have a login() method in the Auth controller where I could just write additional code.
You can override the login() method in LoginController. As you said, in Laravel 5.8 the login() method doesn't exist, but you can define it yourself. The newly defined login() method will override the default one and then you can do whatever extra you want to after or before the user signs in. Here is a snippet from Laracasts:
public function login(Request $request)
{
$this->validateLogin($request);
if ($this->hasTooManyLoginAttempts($request)) {
$this->fireLockoutEvent($request);
return $this->sendLockoutResponse($request);
}
if(Auth::attempt(['email' => $request->email, 'password' => $request->password, 'is_activated' => 1])) {
// return redirect()->intended('dashboard');
} else {
$this->incrementLoginAttempts($request);
return response()->json([
'error' => 'This account is not activated.'
], 401);
}
$this->incrementLoginAttempts($request);
return $this->sendFailedLoginResponse($request);
}
Just go through it and see what has been done there. In short, you can modify the login() method to do whatever you want before or after a user signs in.
There are two functions provided by the AuthenticatesUsers trait. You can customize those in the login controller.
Login Form
public function showLoginForm()
{
return view('auth.login');
}
Handle Login
public function login(Request $request)
{
$this->validateLogin($request);
// If the class is using the ThrottlesLogins trait, we can automatically throttle
// the login attempts for this application. We'll key this by the username and
// the IP address of the client making these requests into this application.
if ($this->hasTooManyLoginAttempts($request)) {
$this->fireLockoutEvent($request);
return $this->sendLockoutResponse($request);
}
if ($this->attemptLogin($request)) {
return $this->sendLoginResponse($request);
}
// If the login attempt was unsuccessful we will increment the number of attempts
// to login and redirect the user back to the login form. Of course, when this
// user surpasses their maximum number of attempts they will get locked out.
$this->incrementLoginAttempts($request);
return $this->sendFailedLoginResponse($request);
}
You can place these two functions in the login controller and make changes as you want.
The best place to add your custom actions is to override authenticated method in your LoginController
protected function authenticated(Request $request, $user)
{
// Your code
}
Just go to where the Illuminate\Foundation\Auth\AuthenticatesUsers trait is located and you will find all the methods you want
it's located in :
vendor/laravel/framework/src/Illuminate/Foundation/Auth/AuthenticatesUsers
Or you can overwrite it in the LoginController to do what ever you want
I am developing a Laravel application. My application is using Laravel built-in auth feature. In the Laravel auth when a user registers, a verification email is sent. When a user verifies the email click on the link inside the email, the user has to login again to confirm the email if the user is not already logged in.
VerificationController
class VerificationController extends Controller
{
use VerifiesEmails, RedirectsUsersBasedOnRoles;
/**
* Create a new controller instance.
* #return void
*/
public function __construct()
{
$this->middleware('auth');
$this->middleware('signed')->only('verify');
$this->middleware('throttle:6,1')->only('verify', 'resend');
}
public function redirectPath()
{
return $this->getRedirectTo(Auth::guard()->user());
}
}
I tried commenting on this line.
$this->middleware('auth');
But it's s not working and instead, throwing an error. How can I enable Laravel to be able to verify email even if the user is not logged in?
First, remove the line $this->middleware('auth');, like you did.
Next, copy the verify method from the VerifiesEmails trait to your VerificationController and change it up a bit. The method should look like this:
public function verify(Request $request)
{
$user = User::find($request->route('id'));
if (!hash_equals((string) $request->route('hash'), sha1($user->getEmailForVerification()))) {
throw new AuthorizationException;
}
if ($user->markEmailAsVerified())
event(new Verified($user));
return redirect($this->redirectPath())->with('verified', true);
}
This overrides the method in the VerifiesUsers trait and removes the authorization check.
Security (correct me if I'm wrong!)
It's still secure, as the request is signed and verified. Someone could verify another user's email address if they somehow gain access to the verification email, but in 99% of cases this is hardly a risk at all.
Here's a more future proof solution to the problem:
class VerificationController extends Controller
{
// …
use VerifiesEmails {
verify as originalVerify;
}
/**
* Create a new controller instance.
*
* #return void
*/
public function __construct()
{
$this->middleware('auth'); // DON'T REMOVE THIS
$this->middleware('signed')->only('verify');
$this->middleware('throttle:6,1')->only('verify', 'resend');
}
/**
* Mark the authenticated user's email address as verified.
*
* #param Request $request
* #return Response
*
* #throws AuthorizationException
*/
public function verify(Request $request)
{
$request->setUserResolver(function () use ($request) {
return User::findOrFail($request->route('id'));
});
return $this->originalVerify($request);
}
}
So when an email confirmation link is clicked by an unauthenticated user the following will happen:
User will be redirected to the login view 1
User enters credentials; logs in successfully 2
User will be redirect back to the email confirmation URL
Email will be marked as confirmed
1 The email will not be marked as confirmed at this point.
2 The user may enter bad credentials multiple times. As soon as he enters the correct credentials he will be redirected to the intended email confirmation URL.
// For Laravel 6 and Above
use Illuminate\Auth\Events\Verified;
use Illuminate\Http\Request;
use App\User;
// comment auth middleware
//$this->middleware('auth');
public function verify(Request $request)
{
$user = User::find($request->route('id'));
if (!hash_equals((string) $request->route('hash'), sha1($user->getEmailForVerification()))) {
throw new AuthorizationException;
}
if ($user->markEmailAsVerified())
event(new Verified($user));
return redirect($this->redirectPath())->with('verified', true);
}
Solution to allow email verification for users who are not logged in (i.e. without auth):
Changes to: app/Http/Controllers/Auth/VerificationController.php:
$this->middleware('auth'); to $this->middleware('auth')->except('verify');
Copy verify() method from the VerifiesEmails trait.
Edit verify method to work without expected $request->user() data.
My verify() method in the VerificationController looks like this:
public function verify(\Illuminate\Http\Request $request)
{
$user = User::find($request->route('id'));
if ($request->route('id') != $user->getKey()) {
throw new AuthorizationException;
}
if ($user->markEmailAsVerified())
event(new Verified($user));
return redirect()->route('login')->with('verified', true);
}
Signed middleware
Laravel uses a middleware named signed to check the integrity of URLs that were generated by the application. Signed checks whether the URL has been changed since it was created. Try changing the id, expiry time or the signature in the url and it will lead to an error - very effective and useful middleware to protect the verify() method
For more information: https://laravel.com/docs/8.x/urls#signed-urls
(Optional)
I redirected my users to the login route, rather than the intended route for two reasons. 1) After login, it would try to redirect the user to the email verification link, leading to an error; 2) I wanted to use the verified true flash data that was attached to the redirect, to show an alert on the login page, if the user had successfully verified their email address.
Example of my login page alert:
#if(session()->has('verified'))
<div class="alert alert-success">Your email address has been successfully verified.</div>
#endif
Suggestions
If you have any suggestions on how I could improve this code, please let me know. I'd be happy to edit this answer.
You should not remove $this->middleware('auth') altogether as that will effect the redirects. If you remove it, the unauthenticated users will be redirected to "/email/verify" instead of "/login"
so $this->middleware('auth'); will be changed to $this->middleware('auth')->except('verify'); in "VerificationController"
Also copy the "verify" function from "VerifiesEmails" into "VerificationController"
add these two lines of code at the top of the function
$user = User::find($request->route('id'));
auth()->login($user);
so you are logging in the user programmatically and then performing further actions
Here's my take on the situation. Verification requires user to login before it can complete the verification, so we can override the verify function and login user using ID we received in the link. It is safe cause verify function is not called if Laravel can't verify the signature from URL so even if someone temper the URL they won't be able to bypass it.
Go to your VerificationController and add the following function at the end of the file.
public function verify(Request $request)
{
if (!auth()->check()) {
auth()->loginUsingId($request->route('id'));
}
if ($request->route('id') != $request->user()->getKey()) {
throw new AuthorizationException;
}
if ($request->user()->hasVerifiedEmail()) {
return redirect($this->redirectPath());
}
if ($request->user()->markEmailAsVerified()) {
event(new Verified($request->user()));
}
return redirect($this->redirectPath())->with('verified', true);
}
Note
Make sure you have same_site value in 'config/session.php' set to 'lax'. If it is set to 'strict' then it won't persist session if you were redirected from another site. For example, if you click a verification link from Gmail then your session cookie won't persist, so it won't redirect you to dashboard, but it sets 'email_verified_at' field in the database marking the verification successful. The user won't get any idea what was happened because it will redirect the user to the login page. When you have set it to 'strict', it will work if you copy the verification link directly in the browser address bar but not if the user clicks the link from the Gmail web client because it uses redirect to track the link.
if you want to active user account without login you can do that in 2 steps
1- Remove or comment Auth middleware in VerificationController
Example below:
public function __construct()
{
//$this->middleware('auth');
$this->middleware('signed')->only('verify');
$this->middleware('throttle:6,1')->only('verify', 'resend');
}
2- since verify route passing the {id} you can just edit verify function to find the user by the route id request like code below :
file path : *:\yourproject\vendor\laravel\framework\src\Illuminate\Foundation\Auth\VerifiesEmails.php
$user = User::findOrfail($request->route('id'));
Complete example
public function verify(Request $request)
{
$user = User::findOrfail($request->route('id'));
if (! hash_equals((string) $request->route('id'), (string) $user->getKey())) {
throw new AuthorizationException;
}
if (! hash_equals((string) $request->route('hash'), sha1($user->getEmailForVerification()))) {
throw new AuthorizationException;
}
if ($user->hasVerifiedEmail()) {
return redirect($this->redirectPath())->with('verified', true);
}
if ($user->markEmailAsVerified()) {
event(new Verified($request->user()));
}
return redirect($this->redirectPath())->with('registered', true);
}
I change EmailVerificationRequest but i now this is wrong, any way it's work.
Warning
This change on the vendor
protected $user;
public function authorize()
{
$this->user = \App\Models\User::find($this->route('id'));
if ($this->user != null){
if (! hash_equals((string) $this->route('id'),
(string) $this->user->getKey())) {
return false;
}
if (! hash_equals((string) $this->route('hash'),
sha1($this->user->getEmailForVerification()))) {
return false;
}
return true;
}
return false;
}
To use inner laravel logic (without overriding the logic), we simply create $request->user() and call trait's verify method. And manually sign in the user when the verification is successful.
use VerifiesEmails {
verify as parentVerify;
}
public function verify(Request $request)
{
$user = User::find($request->route('id'));
if (!$user) return abort(404);
$request->setUserResolver(function () use($user) {
return $user;
});
return $this->parentVerify($request);
}
public function verified(Request $request)
{
Auth::login($request->user());
}
I'm currently using 2 projects. 1 front end (with laravel backend to communicate with API) and another laravel project (the API).
Now I use Laravel Passport to authenticate users and to make sure every API call is an authorized call.
Now when I want to log out my user, I send a post request to my API (with Bearer token) and try to log him out of the API (and clear session, cookies,...)
Then on the client I also refresh my session so the token is no longer known. Now when I go back to the login page, it automatically logs in my user. (Or my user is just still logged in).
Can someone explain me how to properly log out a user with Laravel passport?
Make sure that in User model, you have this imported
use Laravel\Passport\HasApiTokens;
and you're using the trait HasApiTokens in the User model class using
use HasApiTokens
inside the user class.
Now you create the log out route and in the controller,
do this
$user = Auth::user()->token();
$user->revoke();
return 'logged out'; // modify as per your need
This will log the user out from the current device where he requested to log out. If you want to log out from all the devices where he's logged in. Then do this instead
$tokens = $user->tokens->pluck('id');
Token::whereIn('id', $tokens)
->update(['revoked'=> true]);
RefreshToken::whereIn('access_token_id', $tokens)->update(['revoked' => true]);
Make sure to import these two at the top
use Laravel\Passport\RefreshToken;
use Laravel\Passport\Token;
This will revoke all the access and refresh tokens issued to that user. This will log the user out from everywhere. This really comes into help when the user changes his password using reset password or forget password option and you have to log the user out from everywhere.
You need to delete the token from the database table oauth_access_tokens
you can do that by creating a new model like OauthAccessToken
Run the command php artisan make:model OauthAccessToken to create the model.
Then create a relation between the User model and the new created OauthAccessToken Model , in User.php add :
public function AauthAcessToken(){
return $this->hasMany('\App\OauthAccessToken');
}
in UserController.php , create a new function for logout:
public function logoutApi()
{
if (Auth::check()) {
Auth::user()->AauthAcessToken()->delete();
}
}
In api.php router , create new route :
Route::post('logout','UserController#logoutApi');
Now you can logout by calling posting to URL /api/logout
This is sample code i'm used for log out
public function logout(Request $request)
{
$request->user()->token()->revoke();
return response()->json([
'message' => 'Successfully logged out'
]);
}
Create a route for logout:
$router->group(['middleware' => 'auth:api'], function () use ($router) {
Route::get('me/logout', 'UserController#logout');
});
Create a logout function in userController ( or as mentioned in your route)
public function logout() {
$accessToken = Auth::user()->token();
DB::table('oauth_refresh_tokens')
->where('access_token_id', $accessToken->id)
->update([
'revoked' => true
]);
$accessToken->revoke();
return response()->json(null, 204);
}
I am using Laravel 6.12.0, below function is working for me.
public function logout(Request $request){
$accessToken = Auth::user()->token();
$token= $request->user()->tokens->find($accessToken);
$token->revoke();
$response=array();
$response['status']=1;
$response['statuscode']=200;
$response['msg']="Successfully logout";
return response()->json($response)->header('Content-Type', 'application/json');
}
This is my first post.. and i find a clean solution (Laravel last Version)
/**
* Logout api
*
* #return \Illuminate\Http\Response
*/
public function logout(Request $request)
{
if (Auth::check()) {
$token = Auth::user()->token();
$token->revoke();
return $this->sendResponse(null, 'User is logout');
}
else{
return $this->sendError('Unauthorised.', ['error'=>'Unauthorised'] , Response::HTTP_UNAUTHORIZED);
}
}
Below is the simplest way I found to do it.
1. USE database SESSION INSTEAD OF file SESSION
Official documention
php artisan session:table
php artisan migrate
Replace SESSION_DRIVER=file by SESSION_DRIVER=database in your .env file.
2. DELETE USER SESSION RIGHT AFTER LOGIN
After a user is redirected to your frontend and logs in to finally get a token, you probably call a route in api/routes.php to get the user information, that's where I'm closing the user backend session before sending back user information to the frontend:
Route::middleware('auth:api')->get('/user', function (Request $request) {
// Close user session here
Illuminate\Support\Facades\DB::table('sessions')
->whereUserId($request->user()->id)
->delete();
return $request->user();
});
3. REVOKE TOKENS AT LOGOUT
Then, to "log out" (actually, revoke tokens) the user from the frontend, you just need to call another route to revoke the token and refresh_token:
Route::middleware('auth:api')->post('/logout', function (Request $request) {
// Revoke access token
// => Set oauth_access_tokens.revoked to TRUE (t)
$request->user()->token()->revoke();
// Revoke all of the token's refresh tokens
// => Set oauth_refresh_tokens.revoked to TRUE (t)
$refreshTokenRepository = app('Laravel\Passport\RefreshTokenRepository');
$refreshTokenRepository->revokeRefreshTokensByAccessTokenId($request->user()->token()->id);
return;
});
You may prefer to put these two closures in the UserController.
Hope help someone:
if (Auth::check()) {
$request->user()->tokens->each(function ($token, $key) {
$token->delete();
});
}
Good Luck.
I use this in my project to logout from multiple device.
public function logout(Request $request, $devices = FALSE)
{
$this->logoutMultiple(\Auth::user(), $devices);
return response()->json([], 204);
}
private function logoutMultiple(\App\Models\User $user, $devices = FALSE)
{
$accessTokens = $user->tokens();
if ($devices == 'all') {
} else if ($devices == 'other') {
$accessTokens->where('id', '!=', $user->token()->id);
} else {
$accessTokens->where('id', '=', $user->token()->id);
}
$accessTokens = $accessTokens->get();
foreach ($accessTokens as $accessToken) {
$refreshToken = \DB::table('oauth_refresh_tokens')
->where('access_token_id', $accessToken->id)
->update(['revoked' => TRUE]);
$accessToken->revoke();
}
}
Try this code to help you to logout from passport authentication.
Route::post('/logout', function(){
if (Auth::check()) {
Auth::user()->AauthAcessToken()->delete();
}
return response()->json([
'status' => 1,
'message' => 'User Logout',
], 200);
});
check whether your model contains OauthAccessToken which needs to connect with the database oauth_access_tokens. The access token is stored in the database table oauth_access_tokens. and makes a relation from users to oauth_access_tokens.
public function AauthAcessToken(){
return $this->hasMany(OauthAccessToken::class);
}
You can use following code to remove to token for logged in user.
$request->user()->token()->revoke();
If you want to learn about this in-depth then watch this tutorial:
https://www.youtube.com/watch?v=UKSQdg1uPbQ
public function logout(Request $request)
{
$request->user()->token()->revoke();
if ($request->everywhere) {
foreach ($request->user()->tokens()->whereRevoked(0)->get() as $token) {
$token->revoke();
}
}
return response()->json(['message' => 'success']);
}
i have just make a sub authentication Middleware in my Laravel 5.2 application which use Laravel session to store data.
I can put my data to Laravel session
But when i want to delete that variable form session it working for only that request when page redirect or someone reload the page that variable still exists.
In My controller File
class SubmissionController extends Controller
{
public function login(Request $request){
if($request->session()->has('submission')) return redirect('/submission-directory');
return view('submission.login');
}
public function dologin(Request $request){
if(!$request->get('password') == "reader") return redirect('/submission-directory/login')->withErrors('errors.wrong-password');
Session::put('submission','yes');
$redirect = $request->session()->pull('submission_redirect','/submission-directory');
return redirect($redirect);
}
public function index(Request $request){
dump($request->session()->all());
$request->session()->forget('submission');
dump($request->session()->all());
die('coming here');
}
}
but when I reload the page You can session is still exists..
Notice :: I have put all the routs in web Middleware group
Route.php
Route::group(['middleware' => 'web'], function () {
Route::group(['prefix'=>'/submission-directory'],function(){
Route::get('/login','submissionController#login');
Route::post('/login',['as'=>'submission.login','uses'=>'SubmissionController#doLogin']);
Route::group(['middleware'=>'submission'],function(){
Route::get('/','SubmissionController#index');
});
});
Try this
IN Controller :
use Session;
public function index(Request $request)
{
dump(Session::all());
Session::forget('submission');
print_r((Session::all());
die;
}