so im new to laravel, just downloaded composer, created new project through terminal in vscode, tried to run it and this error shows up
Error in localhost>public
The Code:
require_once __DIR__ . '/vendor/autoload.php';
and also getting errors while compiling on these:
$response = $kernel->handle(
$request = Request::capture() //Undefined type 'Illuminate\Http\Request'//
)->send();
the illuminate code:
use Illuminate\Http\Request;
Help would be appreciated
You should have following code for autoload.php. Basically, you're trying to look for vendor directory in the public folder, whereas it is normally placed in the base directory
require __DIR__.'/../vendor/autoload.php';
Did you try running a composer update command?
Re-installed everything in the same (C) directory and its working great now
Appreciate the help, thank you, everyone!
I am facing prob to integrate Quickbook with codeigniter.
I installed the Quick book with following commands
$ composer require quickbooks/v3-php-sdk
$ composer update
but when I call that from controller it returns an error
$configpath = '../vendor/quickbooks/v3-php-sdk/src/sdk.config';
$dataService = DataService::Configure($configpath);
On the start of your php script, add
use QuickBooksOnline\API\DataService\DataService;
How to USE Setasign/FPDI In laravel 5 Project
How to Set App.php?
I user composer download it and don't know how to use it
Install with composer as described:
https://github.com/Setasign/FPDI
Then...
$pdf = new \FPDF('portrait','mm', 'A4');
If you need Fpdi:
$pdf = new \setasign\Fpdi\Fpdi();
I have successfully installed the latest version of CodeIgniter and have basic MVC pattern working. The problem that I've noticed is that CI doesn't naturally allow for prepared statements when it comes to queries. So, I decided to download Doctrine 1 from GitHub. I'm very new to Doctrine and needed some help integrating it with CI so I followed this tutorial.
In one of my controllers, I have
$this->load->library('doctrine');
$this->em = $this->doctrine->em;
But, when I go to load the view in my browser, I'm greeted with an error reading
Message: require_once(/Applications/MAMP/htdocs/CodeIgniter/application/libraries/Doctrine/Common/ClassLoader.php): failed to open stream: No such file or directory
Upon further inspection of the Doctrine download from GitHub, there doesn't even seem to be a folder titled "common" anywhere in there. I'm very new to CI and especially Doctrine. Does anyone have some advice that can help me get this working? Also, is it possible to use the MySQLi driver instead of the PDO one with Doctrine?
Downloading the Doctrine ORM straight from GitHub doesn't include the other dependencies. These are managed by Composer. If you look inside the composer.json file you can see these dependencies. If you want to install them manually, they are:
doctrine/common
doctrine/inflector
doctrine/cache
doctrine/collections
doctrine/lexer
doctrine/annotations
doctrine/dbal
symfony/console
I believe that's all of them. You will have to merge these files in their appropriate directories as they follow PSR-0 standards for the autoloading of classes.
Alternatively, install Doctrine 2 with Composer with the following composer.json file and any other dependencies will be installed automatically. Then integrate with CodeIgniter.
{
"minimum-stability": "stable",
"require": {
"doctrine/orm": "2.3.*"
}
}
Edit the index.php file of your CodeIgniter app by adding a single line to include the autoloader file before requiring the CodeIgniter core.
require_once BASEPATH.'../vendor/autoload.php';
require_once BASEPATH.'core/CodeIgniter.php';
Also if installing with Composer, use this edited version of the bootstrap as the contents of application/libraries/Doctrine.php, which is what worked for me
<?php
use Doctrine\Common\ClassLoader,
Doctrine\ORM\Tools\Setup,
Doctrine\ORM\EntityManager;
class Doctrine
{
public $em;
public function __construct()
{
// Load the database configuration from CodeIgniter
require APPPATH . 'config/database.php';
$connection_options = array(
'driver' => 'pdo_mysql',
'user' => $db['default']['username'],
'password' => $db['default']['password'],
'host' => $db['default']['hostname'],
'dbname' => $db['default']['database'],
'charset' => $db['default']['char_set'],
'driverOptions' => array(
'charset' => $db['default']['char_set'],
),
);
// With this configuration, your model files need to be in application/models/Entity
// e.g. Creating a new Entity\User loads the class from application/models/Entity/User.php
$models_namespace = 'Entity';
$models_path = APPPATH . 'models';
$proxies_dir = APPPATH . 'models/Proxies';
$metadata_paths = array(APPPATH . 'models');
// Set $dev_mode to TRUE to disable caching while you develop
$config = Setup::createAnnotationMetadataConfiguration($metadata_paths, $dev_mode = true, $proxies_dir);
$this->em = EntityManager::create($connection_options, $config);
$loader = new ClassLoader($models_namespace, $models_path);
$loader->register();
}
}
Note: Version 3 of CodeIgniter when released, will be installable with Composer, but version 2 is not.
For those looking for a tutorial to integrate Doctrine 2 with CodeIgniter, this question and others answers are outdated (for CI 2).
This is a new tutorial for CI 3 I made and I checked is working:
How to install Doctrine 2 in CodeIgniter 3
I repeat it here.
Install Doctrine
Doctrine 2 ORM’s documentation - Installation and Configuration
Doctrine can be installed with Composer.
Define the following requirement in your composer.json file:
{
"require": {
"doctrine/orm": "*"
}
}
Then call composer install from your command line.
Integrating with CodeIgniter
Doctrine 2 ORM’s documentation - Integrating with CodeIgniter
Here are the steps:
Add a php file to your system/application/libraries folder called Doctrine.php. This is going to be your wrapper/bootstrap for the D2 entity manager.
Put the Doctrine folder (the one that contains Common, DBAL, and ORM) inside the third_party folder.
If you want, open your config/autoload.php file and autoload your Doctrine library: $autoload[‘libraries’] = array(‘doctrine’);
Creating your Doctrine CodeIgniter library
Now, here is what your Doctrine.php file should look like. Customize it to your needs.
<?php
/**
* Doctrine 2.4 bootstrap
*
*/
use Doctrine\Common\ClassLoader,
Doctrine\ORM\Configuration,
Doctrine\ORM\EntityManager,
Doctrine\Common\Cache\ArrayCache,
Doctrine\DBAL\Logging\EchoSQLLogger;
class Doctrine {
public $em = null;
public function __construct()
{
// load database configuration from CodeIgniter
require_once APPPATH.'config/database.php';
// include Doctrine's ClassLoader class
require_once APPPATH.'third_party/Doctrine/Common/ClassLoader.php';
// load the Doctrine classes
$doctrineClassLoader = new ClassLoader('Doctrine', APPPATH.'third_party');
$doctrineClassLoader->register();
// load the entities
$entityClassLoader = new ClassLoader('Entities', APPPATH.'models');
$entityClassLoader->register();
// load the proxy entities
$proxiesClassLoader = new ClassLoader('Proxies', APPPATH.'models/proxies');
$proxiesClassLoader->register();
// load Symfony2 classes
// this is necessary for YAML mapping files and for Command Line Interface (cli-doctrine.php)
$symfonyClassLoader = new ClassLoader('Symfony', APPPATH.'third_party/Doctrine');
$symfonyClassLoader->register();
// Set up the configuration
$config = new Configuration;
// Set up caches
if(ENVIRONMENT == 'development') // set environment in index.php
// set up simple array caching for development mode
$cache = new \Doctrine\Common\Cache\ArrayCache;
else
// set up caching with APC for production mode
$cache = new \Doctrine\Common\Cache\ApcCache;
$config->setMetadataCacheImpl($cache);
$config->setQueryCacheImpl($cache);
// set up annotation driver
$driver = new \Doctrine\ORM\Mapping\Driver\PHPDriver(APPPATH.'models/Mappings');
$config->setMetadataDriverImpl($driver);
// Proxy configuration
$config->setProxyDir(APPPATH.'/models/Proxies');
$config->setProxyNamespace('Proxies');
// Set up logger
$logger = new EchoSQLLogger;
$config->setSQLLogger($logger);
$config->setAutoGenerateProxyClasses( TRUE ); // only for development
// Database connection information
$connectionOptions = array(
'driver' => 'pdo_mysql',
'user' => $db['default']['username'],
'password' => $db['default']['password'],
'host' => $db['default']['hostname'],
'dbname' => $db['default']['database']
);
// Create EntityManager, and store it for use in our CodeIgniter controllers
$this->em = EntityManager::create($connectionOptions, $config);
}
}
Setting up the Command Line Tool
Doctrine ships with a number of command line tools that are very helpful during development.
Check if these lines exists in the Doctrine.php file, to load Symfony classes for using the Command line tools (and for YAML mapping files):
$symfonyClassLoader = new ClassLoader('Symfony', APPPATH.'third_party/Doctrine');
$symfonyClassLoader->register();
You need to register your applications EntityManager to the console tool to make use of the tasks by creating a cli-doctrine.php file in the application directory with the following content:
<?php
/**
* Doctrine CLI bootstrap for CodeIgniter
*
*/
define('APPPATH', dirname(__FILE__) . '/');
define('BASEPATH', APPPATH . '/../system/');
define('ENVIRONMENT', 'development');
require APPPATH.'libraries/Doctrine.php';
$doctrine = new Doctrine;
$em = $doctrine->em;
$helperSet = new \Symfony\Component\Console\Helper\HelperSet(array(
'db' => new \Doctrine\DBAL\Tools\Console\Helper\ConnectionHelper($em->getConnection()),
'em' => new \Doctrine\ORM\Tools\Console\Helper\EntityManagerHelper($em)
));
\Doctrine\ORM\Tools\Console\ConsoleRunner::run($helperSet);
?>
Now run this script through the PHP command-line and should see a list of commands available to you.
php cli-doctrine.php
Generate mapping classes from database:
php cli-doctrine.php orm:convert-mapping --from-database annotation models/Entities
if you get this error:
Fatal error: Call to undefined function Doctrine\Common\Cache\apc_fetch()
install the APC extension for PHP:
sudo apt-get install php-apc
sudo /etc/init.d/apache2 restart
For production mode you'll want to use a real caching system like APC, get rid of EchoSqlLogger, and turn off autoGenerateProxyClasses in Doctrine.php
Find the link for the doctrine integration in CI
https://github.com/mitul69/codeigniter-doctrine-integration
Please note that code igniter 2 has a little difference in its code organization. In code igniter 2 it is better to put the Doctrine folder in application/third_party folder, instead of application/libraries folder (or else it will not work!).
You can read more about it here
I had the same problem when I tried to follow this tutorial from doctrine user guide
http://doctrine-orm.readthedocs.org/en/latest/cookbook/integrating-with-codeigniter.html
This problem happens when I tried to install via composer so then I went to this web site
http://www.doctrine-project.org/downloads/ and do manually download the DoctrineORM-2.3.3-full.tar.gz version and the error was gone.
The original poster's problem seems to be an issue with autoloading. I was presented with a similar issue when trying to set up CodeIgniter and Doctrine with Composer. In CodeIgniter 3, you can enable the use of composer autoloading, which should allow you to load all Doctrine files correctly. You must point your Composer vendor dir to application/vendor for this to work. You can also do it in older versions, but then you have to include the Composer autoload file manually in your Doctrine library file for CodeIgniter.
If you want more information: I wrote a blog post describing exactly how to do it. http://blog.beheist.com/integrating-codeigniter-and-doctrine-2-orm-with-composer/
you can use this
via composer :
composer create-project rbz/codeigniter your-project
via git :
git clone https://github.com/dandisy/cihmvctwig.git
I have used ci-merchant before but from everything see that the "V2" of it is now omnipay. I use codeigniter and i'm struggling to get even the example to work.
I have installed omnipay no problems and in my controller have the following:
use Omnipay\Common\GatewayFactory;
class Homepage extends BC_basecontroller {
public function index()
{
$gateway = GatewayFactory::create('PayPal_Express');
$gateway->setUsername('adrian');
$gateway->setPassword('12345');
}
}
Which is the example here: https://github.com/adrianmacneil/omnipay
However I get the error:
PHP Fatal error: Class 'Omnipay\Common\GatewayFactory' not found in......
Does anyone know how to get it to work in CI?
I'm not sure how you installed Omnipay, but you need to use Composer to load the classes before you can use them.
So following the Omnipay installation instructions, add this to a composer.json file in your root directory:
{
"require": {
"omnipay/omnipay": "*"
}
}
Then install the files:
$ curl -s http://getcomposer.org/installer | php
$ php composer.phar update
Now, if you are using CodeIgniter you will need to set it up to include the composer autoloader. Basically, just add this line to the top of your index.php file:
require_once __DIR__.'/vendor/autoload.php';
There is also a tutorial on using Composer with CodeIgniter here which you may find helpful: http://philsturgeon.co.uk/blog/2012/05/composer-with-codeigniter
I had the same error and fixed it by loading vendor/autoload.php before application/core/CodeIgniter.php