I'm tryng to do a scatter plot in a for loop where I plot only the last points.
But when looking at my plotted points, they are the points obtained from my equation.
What can I do to only obtain and plot the last points?
Here is the code:
m=1000
z=4000
T=200
pr=101325
sigma=0.24
cc=sigma*10^(-18)
lambda=((1.38*10^(-23)*T)/(sqrt(2)*pr*cc))
p=%pi*2
for I=1:z
theta=(grand(m,1,"unf",0,p));
cx= cumsum(lambda*cos(theta));
cy= cumsum(lambda*sin(theta));
scatter((cx,cy))
xlabel(["x"]);
ylabel("y");
title("Partilcle Distribution");
end
If what you want is to take the last values of cx and cy in each loop, one option is to create new arrays to store those values and plot them outside of the loop, like this:
...
x = zeros(1,z); //row matrix filled with zeros
y = zeros(1,z); //row matrix filled with zeros
for I=1:z
theta = grand(m,1,"unf",0,p);
cx = cumsum(lambda*cos(theta));
cy = cumsum(lambda*sin(theta));
//overwriting values
x(I) = cx($); //the dollar sign ($) returns the last element
y(I) = cy($); //of a row or a column in a matrix
end
scatter(x,y);
xlabel("x");
ylabel("y");
title("Partilcle Distribution");
Related
I have a matrix named figmat from which I obtain the following pcolor plot (Matlab-Version R 2016b).
Basically I only want to extract the bottom red high intensity line from this plot.
I thought of doing it in some way of extracting the maximum values from the matrix and creating some sort of mask on the main matrix. But I'm not understanding a possible way to achieve this. Can it be accomplished with the help of any edge/image detection algorithms?
I was trying something like this with the following code to create a mask
A=max(figmat);
figmat(figmat~=A)=0;
imagesc(figmat);
But this gives only the boundary of maximum values. I also need the entire red color band.
Okay, I assume that the red line is linear and its values can uniquely be separated from the rest of the picture. Let's generate some test data...
[x,y] = meshgrid(-5:.2:5, -5:.2:5);
n = size(x,1)*size(x,2);
z = -0.2*(y-(0.2*x+1)).^2 + 5 + randn(size(x))*0.1;
figure
surf(x,y,z);
This script generates a surface function. Its set of maximum values (x,y) can be described by a linear function y = 0.2*x+1. I added a bit of noise to it to make it a bit more realistic.
We now select all points where z is smaller than, let's say, 95 % of the maximum value. Therefore find can be used. Later, we want to use one-dimensional data, so we reshape everything.
thresh = min(min(z)) + (max(max(z))-min(min(z)))*0.95;
mask = reshape(z > thresh,1,n);
idx = find(mask>0);
xvec = reshape(x,1,n);
yvec = reshape(y,1,n);
xvec and yvec now contain the coordinates of all values > thresh.
The last step is to do some linear polynomial over all points.
pp = polyfit(xvec(idx),yvec(idx),1)
pp =
0.1946 1.0134
Obviously these are roughly the coefficients of y = 0.2*x+1 as it should be.
I do not know, if this also works with your data, since I made some assumptions. The threshold level must be chosen carefully. Maybe some preprocessing must be done to dynamically detect this level if you really want to process your images automatically. There might also be a simpler way to do it... but for me this one was straight forward without the need of any toolboxes.
By assuming:
There is only one band to extract.
It always has the maximum values.
It is linear.
I can adopt my previous answer to this case as well, with few minor changes:
First, we get the distribution of the values in the matrix and look for a population in the top values, that can be distinguished from the smaller values. This is done by finding the maximum value x(i) on the histogram that:
Is a local maximum (its bin is higher than that of x(i+1) and x(i-1))
Has more values above it than within it (the sum of the height of bins x(i+1) to x(end) < the height of bin x):
This is how it is done:
[h,x] = histcounts(figmat); % get the distribution of intesities
d = diff(fliplr(h)); % The diffrence in bin height from large x to small x
band_min_ind = find(cumsum(d)>size(figmat,2) & d<0, 1); % 1st bin that fit the conditions
flp_val = fliplr(x); % the value of x from large to small
band_min = flp_val(band_min_ind); % the value of x that fit the conditions
Now we continue as before. Mask all the unwanted values, interpolate the linear line:
mA = figmat>band_min; % mask all values below the top value mode
[y1,x1] = find(mA,1); % find the first nonzero row
[y2,x2] = find(mA,1,'last'); % find the last nonzero row
m = (y1-y2)/(x1-x2); % the line slope
n = y1-m*x1; % the intercept
f_line = #(x) m.*x+n; % the line function
And if we plot it we can see the red line where the band for detection was:
Next, we can make this line thicker for a better representation of this line:
thick = max(sum(mA)); % mode thickness of the line
tmp = (1:thick)-ceil(thick/2); % helper vector for expanding
rows = bsxfun(#plus,tmp.',floor(f_line(1:size(A,2)))); % all the rows for each column
rows(rows<1) = 1; % make sure to not get out of range
rows(rows>size(A,1)) = size(A,1); % make sure to not get out of range
inds = sub2ind(size(A),rows,repmat(1:size(A,2),thick,1)); % convert to linear indecies
mA(inds) = true; % add the interpolation to the mask
result = figmat.*mA; % apply the mask on figmat
Finally, we can plot that result after masking, excluding the unwanted areas:
imagesc(result(any(result,2),:))
I wish to set values on a line whose endpoints are returned by the hough transforms to zero. I have written the following code snippet
imshow(img);
hold on
img_black = img;
for k = 1:length(lines)
xy = [lines(k).point1; lines(k).point2]; %line end points
[x, y] = bresenham(xy(1,1),xy(1,2),xy(2,1),xy(2,2)); %returns all points on the line
for i = 1:length(x)
plot(x(i),y(i),'*'); %to plot individual pixels on line itself
img_black(x(i),y(i),:) = [0,0,0]; %set rgb values to zero
end
end
Although the points plotted on the image below are as expected
The image where the corresponding pixel values are being set to zero is not as expected.
What is happening here?
It looks like you have mixed up x and y with rows and columns.
img_black(x(i), y(i),:)
Should be
img_black(y(i), x(i),:);
This is because the first dimension of img_black is rows (y) and the second dimension is columns (x).
The resulting image looks like it does because your lines go the wrong way and (sometimes) go outside the bounds of the original image, but MATLAB gladly expands your image (with zeros) and sets the values that you request, hence all the black pixels on the right.
NOTE: This switching back and forth between row, column and x,y is common throughout MATLAB's built-in functions and you should always be careful to note what the output is. A class example is meshgrid vs ndgrid outputs.
this is my situation: I have a 30x30 image and I want to calculate the radial and tangent component of the gradient of each point (pixel) along the straight line passing through the centre of the image (15,15) and the same (i,j) point.
[dx, dy] = gradient(img);
for i=1:30
for j=1:30
pt = [dx(i, j), dy(i,j)];
line = [i-15, j-15];
costh = dot(line, pt)/(norm(line)*norm(pt));
par(i,j) = norm(costh*line);
tang(i,j) = norm(sin(acos(costh))*line);
end
end
is this code correct?
I think there is a conceptual error in your code, I tried to get your results with a different approach, see how it compares to yours.
[dy, dx] = gradient(img);
I inverted x and y because the usual convention in matlab is to have the first dimension along the rows of a matrix while gradient does the opposite.
I created an array of the same size as img but with each pixel containing the angle of the vector from the center of the image to this point:
[I,J] = ind2sub(size(img), 1:numel(img));
theta=reshape(atan2d(I-ceil(size(img,1)/2), J-ceil(size(img,2)/2)), size(img))+180;
The function atan2d ensures that the 4 quadrants give distinct angle values.
Now the projection of the x and y components can be obtained with trigonometry:
par=dx.*sind(theta)+dy.*cosd(theta);
tang=dx.*cosd(theta)+dy.*sind(theta);
Note the use of the .* to achieve point-by-point multiplication, this is a big advantage of Matlab's matrix computations which saves you a loop.
Here's an example with a well-defined input image (no gradient along the rows and a constant gradient along the columns):
img=repmat(1:30, [30 1]);
The results:
subplot(1,2,1)
imagesc(par)
subplot(1,2,2)
imagesc(tang)
colorbar
I want to execute a logical statement in a for loop.
If I have an image of size 480(height) by 640(width), I would like to scan the image in a section, this section being the whole height between width 635 to 640. I would like to find out if there are any (x,y) coordinates which are found in the cell "cellData". This cell contains a whole list of (x,y) coordinates which can be found in the whole image.
h = height
w = width
for h = 1:480
for w = 635:640
if cellData = 1;
cellData(x,y) = SecondCoordinate(x,y);
end
end
end
Basically I am trying to select a point in the section I mentioned above. The point must be from the cell "cellData". Am i doing this correctly? Will the first (x,y) coordinates that the code detects from the cellData be stored as a (x,y) coordinate in "SecondCoordinate(x,y)"?
You should have a look at find. It's not only much shorter, but also more efficient than your current approach with nested for loops.
[row, col] = find(cellData) would return all the coordinates where cellData is not zero.
If cellData contains other values than just ones and zeros, it would be
[row, col] = find(cellData ~= 0)
I have an image in MATLAB:
im = rgb2gray(imread('some_image.jpg');
% normalize the image to be between 0 and 1
im = im/max(max(im));
And I've done some processing that resulted in a number of points that I want to highlight:
points = some_processing(im);
Where points is a matrix the same size as im with ones in the interesting points.
Now I want to draw a circle on the image in all the places where points is 1.
Is there any function in MATLAB that does this? The best I can come up with is:
[x_p, y_p] = find (points);
[x, y] = meshgrid(1:size(im,1), 1:size(im,2))
r = 5;
circles = zeros(size(im));
for k = 1:length(x_p)
circles = circles + (floor((x - x_p(k)).^2 + (y - y_p(k)).^2) == r);
end
% normalize circles
circles = circles/max(max(circles));
output = im + circles;
imshow(output)
This seems more than somewhat inelegant. Is there a way to draw circles similar to the line function?
You could use the normal PLOT command with a circular marker point:
[x_p,y_p] = find(points);
imshow(im); %# Display your image
hold on; %# Add subsequent plots to the image
plot(y_p,x_p,'o'); %# NOTE: x_p and y_p are switched (see note below)!
hold off; %# Any subsequent plotting will overwrite the image!
You can also adjust these other properties of the plot marker: MarkerEdgeColor, MarkerFaceColor, MarkerSize.
If you then want to save the new image with the markers plotted on it, you can look at this answer I gave to a question about maintaining image dimensions when saving images from figures.
NOTE: When plotting image data with IMSHOW (or IMAGE, etc.), the normal interpretation of rows and columns essentially becomes flipped. Normally the first dimension of data (i.e. rows) is thought of as the data that would lie on the x-axis, and is probably why you use x_p as the first set of values returned by the FIND function. However, IMSHOW displays the first dimension of the image data along the y-axis, so the first value returned by FIND ends up being the y-coordinate value in this case.
This file by Zhenhai Wang from Matlab Central's File Exchange does the trick.
%----------------------------------------------------------------
% H=CIRCLE(CENTER,RADIUS,NOP,STYLE)
% This routine draws a circle with center defined as
% a vector CENTER, radius as a scaler RADIS. NOP is
% the number of points on the circle. As to STYLE,
% use it the same way as you use the rountine PLOT.
% Since the handle of the object is returned, you
% use routine SET to get the best result.
%
% Usage Examples,
%
% circle([1,3],3,1000,':');
% circle([2,4],2,1000,'--');
%
% Zhenhai Wang <zhenhai#ieee.org>
% Version 1.00
% December, 2002
%----------------------------------------------------------------
Funny! There are 6 answers here, none give the obvious solution: the rectangle function.
From the documentation:
Draw a circle by setting the Curvature property to [1 1]. Draw the circle so that it fills the rectangular area between the points (2,4) and (4,6). The Position property defines the smallest rectangle that contains the circle.
pos = [2 4 2 2];
rectangle('Position',pos,'Curvature',[1 1])
axis equal
So in your case:
imshow(im)
hold on
[y, x] = find(points);
for ii=1:length(x)
pos = [x(ii),y(ii)];
pos = [pos-0.5,1,1];
rectangle('position',pos,'curvature',[1 1])
end
As opposed to the accepted answer, these circles will scale with the image, you can zoom in an they will always mark the whole pixel.
Hmm I had to re-switch them in this call:
k = convhull(x,y);
figure;
imshow(image); %# Display your image
hold on; %# Add subsequent plots to the image
plot(x,y,'o'); %# NOTE: x_p and y_p are switched (see note below)!
hold off; %# Any subsequent plotting will overwrite the image!
In reply to the comments:
x and y are created using the following code:
temp_hull = stats_single_object(k).ConvexHull;
for k2 = 1:length(temp_hull)
i = i+1;
[x(i,1)] = temp_hull(k2,1);
[y(i,1)] = temp_hull(k2,2);
end;
it might be that the ConvexHull is the other way around and therefore the plot is different. Or that I made a mistake and it should be
[x(i,1)] = temp_hull(k2,2);
[y(i,1)] = temp_hull(k2,1);
However the documentation is not clear about which colum = x OR y:
Quote: "Each row of the matrix contains the x- and y-coordinates of one vertex of the polygon. "
I read this as x is the first column and y is the second colum.
In newer versions of MATLAB (I have 2013b) the Computer Vision System Toolbox contains the vision.ShapeInserter System object which can be used to draw shapes on images. Here is an example of drawing yellow circles from the documentation:
yellow = uint8([255 255 0]); %// [R G B]; class of yellow must match class of I
shapeInserter = vision.ShapeInserter('Shape','Circles','BorderColor','Custom','CustomBorderColor',yellow);
I = imread('cameraman.tif');
circles = int32([30 30 20; 80 80 25]); %// [x1 y1 radius1;x2 y2 radius2]
RGB = repmat(I,[1,1,3]); %// convert I to an RGB image
J = step(shapeInserter, RGB, circles);
imshow(J);
With MATLAB and Image Processing Toolbox R2012a or newer, you can use the viscircles function to easily overlay circles over an image. Here is an example:
% Plot 5 circles at random locations
X = rand(5,1);
Y = rand(5,1);
% Keep the radius 0.1 for all of them
R = 0.1*ones(5,1);
% Make them blue
viscircles([X,Y],R,'EdgeColor','b');
Also, check out the imfindcircles function which implements the Hough circular transform. The online documentation for both functions (links above) have examples that show how to find circles in an image and how to display the detected circles over the image.
For example:
% Read the image into the workspace and display it.
A = imread('coins.png');
imshow(A)
% Find all the circles with radius r such that 15 ≤ r ≤ 30.
[centers, radii, metric] = imfindcircles(A,[15 30]);
% Retain the five strongest circles according to the metric values.
centersStrong5 = centers(1:5,:);
radiiStrong5 = radii(1:5);
metricStrong5 = metric(1:5);
% Draw the five strongest circle perimeters.
viscircles(centersStrong5, radiiStrong5,'EdgeColor','b');
Here's the method I think you need:
[x_p, y_p] = find (points);
% convert the subscripts to indicies, but transposed into a row vector
a = sub2ind(size(im), x_p, y_p)';
% assign all the values in the image that correspond to the points to a value of zero
im([a]) = 0;
% show the new image
imshow(im)