I get the following error when setting up a new Vue project:
npm install -g #vue/cli
Error: EACCES: permission denied, access '/usr/local/lib/node_modules'
I got around this error by changing permissions for two directories:
Set permissions to Everyone - Read / Write for
/usr/local/lib/node_modules
/usr/local/bin
Open Finder.
Press Command +Shift+G. A dialog box opens.
Enter the path and click Go
Right-click the directory and select Get Info
Click the lock icon to allow changes and enter your credentials
In the Sharing & Permissions section change everyone to Read & Write
Click the cog icon and select Apply to enclosed items from the drop down
Confirm the prompt
Reference Article:
https://forum.vuejs.org/t/vue-cli-installation-fails-on-macos-mojave-10-14/45712/5
As far as I know, its not just a Vue Cli issue but can happen for any node module.
Often this happens if you installed NPM as an administrator or using Sudo. You can usually get around it by doing something like sudo npm install xxx-package-xxx But that really just compounds the problem down the road when lots of things need elevated privileges.
In my case uninstalling and re-installing Node + NPM with a new package (not the ones included with MacOS) kind of helped but I eventually ended up nuking my OS and installing everything fresh.
hope you having a good day.
I am a Web Frontend designer and i'm tired about MAC OSX El Capitan and his sick permissions systems on files and folders, the next is happening:
Every time that i tried to get any Bower package, NPM, or whatever console package i get this problem:
Example: 'Bower install angular-translate'
Console response:
'Error: EACCES: permission denied, open '/Users/carl/.config/configstore/bower-github.json'
You don't have access to this file.'
This is not just for this package in specific, it happend with everything that i tried to download/install in every place in my laptop.
I am the administrator on this machine, i been google that like 5 or 10 times always getting same results and always going to the same way (solutions like 'chmod-R 777* on the folder/file').
My question is the next:
There is some 'permanent' way to get all my files and folders 'global' administrator permissions no matter what? i mean, i know that is not secure, pero it is ok, i am the only one who use this laptop.
Thank you so much for your help.
Best Regards.
In order to solve the issue. I ran the command 'sudo chown -R $USER ~/' from the terminal. While inside the same terminal window, I then ran 'bower install' which solved my issue! Afterwards, I was able to install other packages(Ex. bower install bootstrap --save.
I installed last version of Node.js (12.2 x64 windows)
After I run cmd as administrator and try to call any npm command (except npm -v), cmd window is hanging. After Ctrl+C it returns
Terminate batch job (Y/N)?
I was trying to left cmd for several hours but it didn't give some results.
It is strange because node.exe process is consuming CPU and memory quite hard.
I was trying to reinstall node.js several times without success.
I can't even get some debug information.
I faced such issue on my VM which I was using by connecting via rdp. Same version installed on my laptop works ok. On my VM I had Kaspersky antivirus, but after switching it off I got same result.
Did somebody face such issue? Is there some way to get more information problem?
Could you please recommend me some way to resolve?
I've finally resolved my issue.
According to suggestion from our local read me file
Node.js (with NPM) Note: On windows server machines, instead of node modules been installed at user %APPDATA% path, its better to install at a global path e.g c:\npm. This could be acheived by the npm command: $ npm config set prefix 'c:\npm' This is not required on individual developer's machine.
I've executed npm config set prefix 'c:\npm'.
As result it added prefix="'c:\\npm'" to my .npmrc file
This make node.js really crazy. It takes me about an hour to debug all these js scripts npm.js code.js etc... to find that it calls mkdirp with 'c:\\npm'\etc and it loop process forever.
If anyone will encounter this problem in the future you need to find the npmrc file delete it and delete all configurations for node, delete node as well and install it, this should fix that.
when deleting node some of the configurations aren't deleted so you have to delete it manually.
It happenned for me too : I installed node only for my user on Windows 10, and managed to use npm by calling it using the full path "c:\Program Files\nodejs\npm"
I solved by using "c:\Program Files\nodejs\npm" config set prefix "c:\Program Files\nodejs" (setting the prefix to the full path to npm)
And the result was :
λ cat c:\Users\<my_user_name>\.npmrc
prefix=c:\Program Files\nodejs
Now eveything works fine.
It's if the prefix is not set correctly.
Just want to point out to those commenting -if you can't get access to the command line npm, then you can't run npm config, obviously.
Open up powershell and type notepad $HOME/.npmrc, and edit the line where it says prefix=... and change it to a valid one.
For clarity, when you call:
npm config set prefix 'c:\npm'
you are required to have the ' wrapping the path, but you need to remove them from the .npmrc file so that npm commands will work. So your resulting line in .npmrc file should look like:
prefix="c:\\npm"
Just delete the .nprmc file at User/%UserProfile% and now try the command if it dosents work even reinstall once.
I am completely new to nodejs. I am trying to get nodejs to work on my Windows 2008 box in order to install Karma which I would use for TDDing my AngularJs code. I have done the following steps so far
Install using Chocolatey ==> npm is not recognised
Install using 64-bit nodejs installer from nodejs.org ==> npm is not recognised
At this stage, running where npm gives me c:\User\<Username>\AppData\Roaming\npm which has nothing in it
I figure out that nodejs is installed in C:\Program Files\nodejs. Opening a command prompt in this directory makes npm work fine.
So I added C:\Program Files\nodejs to PATH only to get the same error again that npm is not recognized
One of the github issues on nodejs repository says that I need to restart the machine and it would fix. But that has not helped so far
I do see a Node.js icon in my Start -> Programms mennu which takes me to nodejs console but not sure what to do with that.
Have I missed any important step in the process?
Edit
I figured out that if I open "Nodejs command prompt" from program files, then npm is recognized. How do I make it work on a normal command prompt?
Edit
After node I started facing a similar problem with another application. I posted this question on superuser and as rightly pointed out by the accepted answer, I had an additional quote in my PATH which was causing issues with all the paths added after the quote. I have a feeling that some Chocolatey install adds this troubling quote but I am just not sure which one.
Just add:
;C:\Program Files\nodejs\
To the end of your Path variable on the "User variable" section of the Environment Variables on the System Properties.
After that, reopen your command prompt and type
npm
This should work.
Don't forget to reboot your computer after installing node! That one got me.
If you are using VS Code, close VS code and open again.
I tried closing Terminal and then opening new Terminal but it didn't work.
Re-Starting VS Code works!
To elaborate on Breno's answer... For Windows 7 these steps worked for me:
Open the Control Panel (Click the Start button, then click Control Panel)
Click User Accounts
Click Change my environment variables
Select PATH and click the Edit... button
At the end of the Variable value, add ;C:\Program Files\nodejs
Click Ok on the "Edit User Variable" window, then click Ok on the "Environment Variables" window
Start a command prompt window (Start button, then type cmd into the search and hit enter)
At the prompt (C:\>) type npm and hit enter; you should now see some help text (Usage: npm <command> etc.) rather than "npm is not recognized..."
Now you can start using npm!
For Windows users: A picture tells a thousand words
Reference: npm not recognized as internal or external command (Note: this is my own blog)
Just Download and Install Node.js from here https://nodejs.org/en/
If you run the downloaded file and install it, they will automatically configure for your system
You don't need any other configurations anymore, now you can use the npm command anywhere
If the Nodejs is successfully installed and still displays the message like this:
'npm' is not recognized as an internal or external command, operable program or batch file.
Follow the steps below for Windows users:
Go to My Computer Properties
Click Advanced System Setting from the Left bar of a window.
Now you have a System Properties window. Click Advanced
Then, Click Environment Variable button
Now you have Environment variable window: From System Variable, Select Path
Click Edit
At the end of the Variable value, add ;C:\Program Files\nodejs\
Note: If you have installed nodejs on other drives then please act accordingly.
Click Ok all the open dialogue box
Very important Note: "Close your Command Prompt And Restart Again"
(It's very important because if you didn't restart your command prompt then changes will not be reflected.)
Now you can use the npm command anywhere
Don't forget to run cmd as admin.
I understand this question is really old and we have many answers, unfortunately, my scenario was different, thus a different solution.
If you started using nvm to manage the node versions after you install the node in your machine, most likely you will be facing the same issue.
I installed a version 10.15.3 and then I had to use another version as there is some tight dependency with one of my projects. Then I decided to install the nvm, while installing it asked, whether I need nvm to manage the version already installed on my machine which is 10.15.3. And yeah, I said Yes hoping that it will take care of that, unfortunately, it didn't.
I was always getting this error no matter I tried many other things mentioned in the other answers here, including setting the path. In the end, to fix that, these are the things I tried.
Uninstall the node version installed, for example, nvm uninstall 10.15.3
Make sure no other node versions are there, nvm list
Then, install the version needed, for example, nvm install 10.15.3. This should give you an output as preceding.
Downloading node.js version 10.15.3 (64-bit)...
Complete
Creating C:\Users\SibeeshVenu\AppData\Roaming\nvm\temp
Downloading npm version 6.4.1... Complete
Installing npm v6.4.1...
Installation complete. If you want to use this version, type
nvm use 10.15.3
PS C:\Users\SibeeshVenu> nvm use 10.15.3
Now using node v10.15.3 (64-bit)
Please note that from the above command, the npm is also installed.
Now use the version you need, nvm use 10.15.3 and type npm
I had the same problem described by Ashu, but in addition to that, the PATH entry for nodejs was terminated by a backslash:
C:\Program Files\nodejs\
I also had to remove that final backslash in order to have it work.
I faced the exact same issue and notice that after installing node.js there was a new path entry in the user variable section for PATH with value --> c:\User\\AppData\Roaming\npm. Also the Path entry in the system variable is appended with --> C:\Program Files\nodejs. Now since user variable has preference over system you have two options to fix this. Either delete the path from user variable or correct the right path (C:\Program Files\nodejs). Restart CMD and it should work.
Set aside all the tips, just run the following line in cmd
> SET PATH=C:\Program Files\Nodejs;%PATH%
If you're getting this error through a service account like Visual Studio TFS Build controller service or any other background service, make sure you restart the service after installing npm as the new PATH environment settings will not be picked up by those already running processes. I was getting same error through my build service but I had npm installed and running in the console.
You might have already received a response but this might help others since I experienced the same issue recently and this is what I did:
Added a path for Powershell. For me, the path was C:\Windows\System32\WindowsPowerShell\v1.0
Then, I opened the command prompt with administrative privileges and ran
#powershell -NoProfile -ExecutionPolicy unrestricted -Command "iex ((new-object net.webclient).DownloadString('https://chocolatey.org/install.ps1'))" && SET PATH=%PATH%;%ALLUSERSPROFILE%\chocolatey\bin
Next, choco install nodejs
Restart and everything worked fine. Try opening the command prompt without admin privileges and run npm -v
Cheers.
Had the same problem on Windows 8.1 64 bit.
Turns out i get that problem if I start cmd by typing it in the path bar at the top of a folder window or when i shift right click in a folder window and then open command prompt from the list.
When I run cmd using Run or Just from the cmd.exe executable it works.
I installed nodejs following this AngularJS tutorial. the npm command did work when I open a new cmd window but not in the current one.
So the fix was to close and open a new cmd window.
If the package is successfully installed and still shows the message "'npm' is not recognized as an internal or external command, operable program or batch file."
Click windows start button.
Look for "ALL APPS", you will see Node.js and Node.js Command prompt there.
You can run the Node.js Command prompt as administrator and soon as its run it will show the message "Your environment has been set up for using Node.js 6.3.0 (x64) and npm."
and then it works from there...
I ran into this issue as well. It turns out Windows doesn't enjoy single quotes on the command line. The culprit was one of my npm scripts. I changed the single quotes to escaped double quotes:
'npm -s run sass-build'
to
\"npm -s run sass-build\"
I'm updating this thread with a new answer because I've found the solution to my miserable situation after not less than a week ...
For those still experiencing the error even though they have their path value set properly, check your pathext variable to have the value (default value in windows 7 +) : .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
Mine was to set only to : .BAT and changing it solved the problem. I wonder why nobody brought this up ...
Hope this helps!
If everything looks fine. I would advice to check this for PATHEXT .CMD must be added.
I don't know why most of user suggesting ; / in the command.
I solved this by removing ; and /
Before
;C:\Program Files\nodejs\
After Solution
C:\Program Files\nodejs
You need to save them into system PATH variables
I ran into this problem the other day on my Windows 7 machine. Problem wasn't my path, but I had to use escaped forward slashes instead of backslashes like this:
"scripts": {
"script": ".\\bin\\script.sh"
}
Step 1: install NodeJs
step 2: Set environment path
Step 3: Restart PC once
I installed Node.js and while trying to install Ionic and cordova using this piece of code:
npm install -g cordova ionic
I faced the above error. I added 'C:\Program Files\nodejs' to my Environment Variable 'PATH'. But still was unable to get over this issue. Turned out that my PATH variable was longer than 2048 characters and so I was unable to add the Nodejs path to it. I had to remove the path of another program and add the Nodejs path.
Close and reopen the cmd prompt and try to install Ionic again.
This worked for me.
for me adding path to PATH didn't do the trick.
Run c:\Program Files\nodejs\nodevars.bat instead, it will do the job for you
Well in my case doing testing via Mocha i tried everything just to realize i have to remove single quotes around my test case script tag inside package.json.
I am running mocha test case on all *.test.js files as can see below:
package.json
Before:
"scripts": {
"test": "mocha server/**/*.test.js",
"test-watch": "nodemon --exec 'npm run test'"
}
After(removing single quotes - npm run test):
"scripts": {
"test": "mocha server/**/*.test.js",
"test-watch": "nodemon --exec npm run test"
}
Worked for me, just in case someone else also gets stuck on this.
Check npm config by command:
npm config list
It needs properties: "prefix", global "prefix" and "node bin location".
; userconfig C:\Users\username\.npmrc
cache = "C:\\ProgramData\\npm-cache"
msvs_version = "2015"
prefix = "C:\\ProgramData\\npm"
python = "C:\\Python27\\"
registry = "http://registry.com/api/npm/npm-packages/"
; globalconfig C:\ProgramData\npm\etc\npmrc
cache = "C:\\ProgramData\\npm-cache"
prefix = "C:\\ProgramData\\npm"
; node bin location = C:\Program Files\nodejs\node.exe
; cwd = C:\WINDOWS\system32
In this case it needs to add these paths to the end of environment variable PATH:
;C:\Program Files\nodejs;C:\ProgramData\npm;
If you used ms build tools to install node the path is here:
C:\Program Files (x86)\Microsoft Visual Studio\2019\BuildTools\MSBuild\Microsoft\VisualStudio\NodeJs
You don't need to "install" Node.js. Just download the package from https://nodejs.org/en/download/releases/ and extract the contents somewhere. Then, in a command prompt, you can navigate there using cd. Then you can run npm from that location. While you will have to do the cd C:\Users\YourAcct\Documents\node-v16.13.0-win-x64 or similar command before you can run it, it's a way to get it onto your computer and run npm without having to be an admin or editing environmental variables.
The issue is with system policy. I have tried the following comments in powers heel then it is started working
$> Set-ExecutionPolicy Unrestricted -Scope CurrentUser -Force
$> npm install -g npm-windows-upgrade
$> npm-windows-upgrade
I got this idea from the following link
After adding environment varible path restart your machine maybe this will work. it work for me. i was using vm.
I'm having problems getting Docpad to run on Windows.
I did the following.
Installed the latest version of Node
"NPM Install Docpad"
Then typed "docpad run" in an empty directory
I got an error message that said 'docpad' is not recognized as an internal or external command,
operable program or batch file.
Maybe I'm missing a step somewhere? I've also tried submitting the command to the node command prompt, and have also checked the troubleshooting guide and done a general google search.
Unless you installed an NPM module with the -g option (which is not indicated in the docpad web site so I suspect you didn't) the module won't be available on your PATH.
You can still run it by indicating the full path, for example run the following from the folder where you ran the npm install command:
node_modules\.bin\docpad.cmd
I had this same problem and a restart didn't help me.
What worked for me was installing via the 'nodejs command prompt' rather than the standard windows one.
I ran npm install -g docpad then navigated to my empty folder and ran docpad run and it worked straight away (after 1 hour messing around with the windows command prompt).