I am trying to run configurecommand for gnuradio-802.15.4-demodulation file downloaded from github.
It is showing these error.
checking for gnuradio-core >= 2... Package gnuradio-core was not found in the pkg-config search path. Perhaps you should add the directory containing `gnuradio-core.pc' to the PKG_CONFIG_PATH environment variable No package 'gnuradio-core' found
configure: error: Library requirements (gnuradio-core >= 2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.
i have already installed gnuradio-companion and its working well.
I do not much programming and kindly tell what is the problem in simple terms and what correction i should make?
To cite the answer I gave you on https://lists.gnu.org/archive/html/discuss-gnuradio/2017-10/msg00108.html
Hi Rensi,
ah, your Stackoverflow Question[1] could really use that link!
That module was last touched 9 years ago; pretty certainly dead[0]. It
simply won't work with any GNU Radio you'll find these days. GNU
Radio, and its whole ecosystem, moved away from autoconf/automake a
couple of years ago. So, if something has to do with GNU Radio and
needs to be ./configure'd, then it's safe to say it won't work
anymore.
Instead, look into Basti's gr-ieee802-15-4[2]. It's maintained, it
actually does the whole PHY stack, it's easy to build. Also, there's
based-upon / similar modules that do other 802.15.4 PHYs, as there's
more than the O-QPSK that your link uses; namely:
O-QPSK PHY: [2]
CSS PHY: [2]
LECIM DSSS PHY: [3]
PSSS PHY: In the making, watch [3]/[4] for new additions
Best regards,
Marcus
[0] https://youtu.be/MH7KYmGnj40
[1]
Package gnuradio-core was not found
[2] https://github.com/bastibl/gr-ieee802-15-4
[3] https://github.com/kit-cel/gr-lpwan
[4] https://github.com/kit-cel/
Related
Closed. This question needs debugging details. It is not currently accepting answers.
Edit the question to include desired behavior, a specific problem or error, and the shortest code necessary to reproduce the problem. This will help others answer the question.
Closed 6 years ago.
Improve this question
I am working on a custom CFD Solver written in Fortran 90 and MPI.
The code contain 15+ Modules and was initially designed to work with the Intel Fortran compiler. Now since i do not have access to the Intel compiler I need to make it work using the GNU Fortran Compiler.
I made changes in the Makefile that initially had flags suitable for the ifort.
I am using it on Ubuntu with GNU Fortran and Openmpi
I am sorry I am unable to put in anything from the code structure or terminal output due to IP restrictions of my university. Nevertheless,I will try to best describe the issues
So now when I compile the code I am having some strange issues.
The GNU Fortran is not able to read lines that are too long and I get errors during compilation. As a result I have to break it into multiple lines using the '&' symbol
A module D.f90 contains all the Global variables declared. However, now I during compilation i get error is in module B.F90.
The error I get is 'Unclassified Statement Error', I was able to fix it in some subroutines and functions by locally declaring the variables again.
I am not the most experienced person in Fortran, but I thought that the change in compiler should not be a reason for new found syntax errors.
The errors described above so far could be remedied but considering the expanse of the code it is impractical.
I was hoping if anyone could share views on this matter and provide guidance on how to tackle it.
You should start reading three pieces of documentation:
The Fortran 90 standard (alternatively, other versions), which tells you what is legal, standard Fortran and what is not. Whenever you find some error, look at your code and check if what you are doing is legal, standard Fortran. Likely, the code in question will either be completely nonstandard (e.g. REAL*8, although that extension is fairly well understood) or rely on unspecified behaviour that Intel Fortran and GFortran are interpreting in different ways.
The GFortran manual for your version, which tells you how GFortran decides such unspecified cases, what intrinsic functions are available, how to change some options/flags, etc. This would tell you that your problem with the line lengths would be solved by adding -ffree-line-length-none.
The Intel Fortran manual for your version, which in cases of non-standard or unspecified behaviour, will allow you to know what the code you are reading was written to do, e.g. the behaviour that you would expect. In particular, it will allow you to decipher what the compiler flags that are currently being used mean. They may or may not need translation to GFortran, e.g. /Qsave will need to become -f-no-automatic.
A concrete example of interpretative differences within the range allowed be the standard: until Fortran 2003, the units for the "record length" in random access record files were left unspecified. Intel Fortran used "one machine word" (4 bytes in x86) while GFortran used 1 byte. Both were compliant with the standard letter, but incompatible.
Furthermore, even when coding "to standard", you may hit a wall if the compiler does not implement part of the Fnn standard, or it is buggy. Case in point: Intel Fortran 12.0 (old, but it's what I work with) does not the implement the ALLOCATE(y, SOURCE=x) construct for polymorphic x (the "clone allocation"). On the other hand, GFortran has not completely implemented FINAL type-bound procedures (destructors).
In both cases, you will need to find workarounds. For example, for the first issue you can use a special form of the INQUIRE statement (kudos to #haraldkl). In other cases, the workaround might even involve using some kind of feature detection (see autoconf, CMake, etc.) and storing the results as PARAMETER variables in a config.f90 file that is included by your code. Your code would then take decisions based on it, as in:
! config.f90.in (things in #x# would get subtituted by automake, for example)
INTEGER, PARAMETER :: RECORD_LEN_BYTES = #RECORD_LEN_BYTES#
! Some other file which opens a file
INCLUDE "config.f90"
!...
OPEN(u, FILE='DE430.BIN', ACCESS='direct', FORM='unformatted', RECL=56 / RECORD_LEN_BYTES)
People have been having complaints about following the standard since at least the 60s. But those cDEC$ features were put in a for good reasons...
It is valuable to cross compile though and you usually have things caught in one compiler or the other.
For you question #1 "The GNU Fortran is not able to read lines that are too long and I get errors during compilation. As a result I have to break it into multiple lines using the '&' symbol"
In the days of old there was:
options/extended_source
SUBROUTINE...
In fort it is -132, but I have not found a gfortran equivalent to -132 . It may be -ffixed-line-length-n -ffixed-line-length-none -ffree-line-length-n -ffree-line-length-none per the link: http://www.math.uni-leipzig.de/~hellmund/Vorlesung/gfortran.html#SEC8
Also the ifort standard for .f90 and .f95 is the the compiler switch '-free' '-fixed' is the standard <.f90... However one can use -fixed with .f90 and use column 6 and 'D' in column #1... Which is handy with '-D_lines' or '-DD'.
Per the link: https://software.intel.com/sites/default/files/m/f/8/5/8/0/6366-ifort.txt
For you question #2: "A module D.f90 contains all the Global variables declared. However, now I during compilation i get error is in module B.F90. The error I get is 'Unclassified Statement Error', I was able to fix it in some subroutines and functions by locally declaring the variables again."
You probably need to put in the offending line, if you can get an IP waiver.
Making variables local if they are expected to be shared in a /common/ or shared in a module will not work.
If there were in /common/ or PUBLIC then they are shared.
If they are local then they are PRIVATE.
it would be easy to get that error if a PRIVATE statement was in the wrong place, or a USE statement was omitted.
I'm creating a VHDL project (Xilinx ISE for Spartan-6) that will be required to use decimal "real-style" numbers in either fixed/floating point (I'm hoping fixed point will be sufficient).
Being quite new to VHDL, I found out the hard way that the non-constant real types are not supported for synthesis, so I set about searching for a IP core or library to redress this.
So far I've found 3 options;
1) A floating point IP core provided by Xilinx
2) A downloadable "ieee_proposed" library written by a David Bishop found here
3) After spending a fair while attempting to work out how to "create" a new library with David Bishops files in, I took a quick look through the default IEEE library and saw it contains ieee.fixed_generic_pkg and ieee.fixed_pkg packages.
My question is - of the two libraries - which one would be sensible to use? Is one adapted for synthesis and one not, or one older than the other? And then if floating point is provided, is there any real point to the floating point IP core provided by Xilinx?
I've trawled through many questions of people attempting to add the ieee_proposed libraries, but none seem to have referenced the fact they they already seem to exist in the existing IEEE.
Thanks very much for any help!
============UPDATE (Essentially my own efforts to resolve)==================
I can't actually use the ieee.fixed_pkg - and attempting to do so gives me the error Cannot find <fixed_pkg> in library <ieee>.
After finding the ieee library at C:\Xilinx\14.7\ISE_DS\ISE\vhdl\xst\nt I've found that the fixed_pkg actually resides in ieee_proposed. However, this still throws up the same errors!
Dumb question, but when you downloaded the ieee_proposed did you also remember to compile it?
edit: And also remember to map the library to you simulation as well. Maybe you did all this already but these are the mistakes I make often.
I've been battling with the same problems for days.
The way I solved it is:
1. Add fixed_float_types_c, fixed_pkg_c and float_pkg_c vhdl files to project.
2. Declare them as belonging to work library (Properties in Quartus files window)
3. Compile project and call library using:
Library work;
use work.fixed_pkg.all;
To my annoyance, they don't come up in the nice red writing I want them to but it works!
so this week consisted of me installing Logtalk, one of the extensions for Prolog. In this case I'm using Prolog SWI, and I've run into a little snag. I'm not sure how to actually consult my own projects using Logtalk. I have taken a look at the examples that Logtalk comes with in order to understand the code itself, and in doing so I've been able to load them and execute them perfectly. What I don't understand though is what is actually going on when logtalk is loading a file, and how I can load my own projects.
I'll take the "hello_world" example as the point of discussion. The file called hello_world, is located in the examples folder of the Logtalk files. and yet it is consulted like so:
| ?- logtalk_load(hello_world(loader)).
First thing I thought was "that is a functor", looking at what it was doing using trace, I found that it was being called from the library and was being told how to get to the examples folder, where it then opened the "hello_world" folder and then the "loader" file. After which normal compiling happened.
I took a look at the library and couldn't figure out what was going on. I also thought that this can't possibly be the practical route to load user created projects in Logtalk. There was another post that was asking how to do this with SWI as well, but it didn't have any replies and didn't look like any effort had been made to figure the problem out.
Now let me be clear on something, I can use the "consult('...')." command just fine, I can even use "consult" to open my projects, however if I do this the logtalk console doesn't seem to be using any of the logtalk extensions and so is just vanilla prolog. I've used an installer for windows to install logtalk and I know that it is working as I've been looking at the examples that it comes with.
I've tried to find a tutorial but it is very difficult to find much of anything for Logtalk, the most I have found is this documentation on loading from within your project:
logtalk_load/1.
logtalk_load/2.
which I understand like so:
logtalk_load(file). % Top level loading
logtalk_load(folder(file). % Bottom level loading
So to save a huge manual load each time I would have a loader file that will load the other components of my project (which is what the examples for Logtalk do). This bit makes sense to me, I think, how I get to my loader file, doesn't.
Whether or not I have been understanding it correctly or not remains to be seen, but even if I have been understanding it correctly, I'm still lost as to how I load my own projects. Thanks for any help you can give, if you could give an example that'll be best as I do learn from examples quite quickly.
LITTLE UPDATE
You asked if I was using a logtalk console for my program running, and I am, I'm using the one that is provided and referred to during the "QUICK_START" file [Start > Programs > Logtalk > "Logtalk - Prolog-SWI (console)"] I thought to double check if the logtalk add ons were working and tested the "birds" example since it uses objects and is a nice familiar example. Yet again, everything works fine when using the logtalk_load/2 functor.
I took a look at what the library path was referring to a bit more given the feedback given so far. Looking into how logtalk loads files. Set up as it is so far, without changing things logtalk consults a folder which contains a prolog file called libpaths. It is basically how the examples are found, all it is is a part way description for where to get a file from. So when I say "logtalk_load/2" from what I can tell at least I'm going to this file and finding where the folder is that I'm asking for.
Now since I have already placed my own project folder in the examples folder, I promptly added my own folder to the list to test if this would at least be a part way solution to help me understand things a bit more. I added the following to the libpaths.pl file.
logtalk_library_path(my_project, examples('my_project/')).
% The path must end in a / so I have done so
So, I've got my folder path declared, got my folder, and the loader file is what I'll be calling when I use the loader. Without thinking about setting my own lib path folder, I should have enough to get things working and do some practical learning. But alas no, seems my investigation failed and I was returned the following:
ERROR: Unhandled exception: existence_error(library,project_aim)
Not what I wanted to see, I'm back to this library error business. I'm missing a reference to my project folder somewhere but I don't know where else it could need referencing. Running trace on the matter didn't help I simply had the following occur:
Call: (17) logtalk_library_path(my_project, _G943) ? creep
Fail: (17) logtalk_library_path(my_project, _G943) ? creep
ERROR: Unhandled exception: existence_error(library,my_project)
The call is failing, I'm simply not finding a reference where ever it is logtalk is looking. And I'm a novice at best when it comes to these sorts of issues, I've been using computers now for only 3 years and programming for the past 2 in visual studios using c# and c++. At least I've shone some more light on the matter, any more helpful advice given this information?
Please use the official Logtalk support channels for help in the future. You will get timely replies there. Daniel, thanks for providing help to this user.
I assume that you're using Logtalk 2.x. Note that Logtalk 3.x supports relative and full source file paths. In Logtalk 2.x, the logtalk_compile/1-2 (compile to disk) and logtalk_load/1-2 (compile and load into memory) predicates take either the name of a source file (without the .lgt extension) OR the location of the source file to be loaded using "library notation". To use the former you need first to change the current working directory to the directory containing the file. This makes the second option more flexible. As you mention, the hello_world example you cite, can be loaded by typing:
?- logtalk_load(hello_world(loader)).
or:
?- {hello_world(loader)}.
Logtalk 2.x and 3.x also provide integration with some SWI-Prolog features such as consult/1, make/0, edit/0-1, the graphical tracer and the graphical profiler. For example:
?- [hello_world(loader)].
********** Hello World! **********
% [ /Users/pmoura/logtalk/examples/hello_world/hello_world.lgt loaded ]
% [ /Users/pmoura/logtalk/examples/hello_world/loader.lgt loaded ]
% (0 warnings)
true.
To load your own examples and projects, the easiest way is to add a library path to the directory holding your files to the $LOGTALKUSER/settings.lgt file (%LOGTALKUSER%\settings.lgt on Windows) as Daniel explained. The location of the Logtalk user directory is defined by you when using the provided installer. The default is My Documents\Logtalk in Windows. Editing the libpaths.pl file is not a good idea. Use the settings.lgt file preferentially to define your own library paths. Assuming, as it seems to be your case, that you have created a %LOGTALKUSER%\examples\project_aim directory, add the following lines to your %LOGTALKUSER%\settings.lgt file:
:- multifile(logtalk_library_path/2).
:- dynamic(logtalk_library_path/2).
logtalk_library_path(project_aim, examples('project_aim/').
If you have a %LOGTALKUSER%\examples\project_aim\loader.lgt file, you can then load it by typing:
?- {project_aim(loader)}.
Hope this helps.
What makes me uncertain of my answer is just that you claim the usual consult works but not logtalk_load. You do have to run a different program to get to Logtalk than Prolog. In Unix it would be something like swilgt for SWI-Prolog or gplgt for GNU Prolog. I don't have Windows so I can't really tell you what you need to do there, other than maybe make sure you're running a binary named Logtalk and not simply Prolog.
Otherwise I think your basic problem is that in Windows it's hard to control your working directory. In a Unix environment, you'd navigate your terminal over to the directory with your files in it and launch Logtalk or Prolog from there. Then when you name your files they would be in the current directory, so Prolog would have no trouble finding them. If you're running a command-line Prolog, you can probably configure the menu item so that it will do this for you, but you have to know where you want to send it.
You can use the functor notation either to get at subdirectories (so, e.g., foo(bar(baz(bat(afile)))) finds foo\bar\baz\bat\afile.lgt). This you seemed to have figured out, and I can at least corroborate it. This will search in its predefined list of functors, and also in the current directory. But you could launch Logtalk from anywhere and then run, say, assertz(logtalk_library_path(foo, 'C:\foo\bar\baz\bat')). after which logtalk_load(foo(afile)) is going to be expanded to C:\foo\bar\baz\bat\afile.lgt.
Building on that technique, you could put your files in the Logtalk user directory and use $LOGTALKUSER as demonstrated in the documentation. I can't find a definitive reference on where the Logtalk user directory will be on Windows, but I would expect it to be in the Documents and Settings folder for your user. So you could put stuff in there and reference it by defining a new logtalk_library_path like this.
It's nice, but it still leaves you high and dry if you have to keep on re-entering these assertions every time you launch. Fortunately, there is a Logtalk settings file named settings.lgt in your Logtalk user directory which has a chunk of commented-out code near the top:
% To define a "library" path for your projects, edit and uncomment the
% following lines (the library path must end with a slash character):
/*
:- multifile(logtalk_library_path/2).
:- dynamic(logtalk_library_path/2).
logtalk_library_path(my_project, '$HOME/my_project/').
logtalk_library_path(my_project_examples, my_project('examples/')).
*/
You can simply uncomment those lines and insert your own stuff to get a persistent shortcut.
You can also write a plrc file for SWI Prolog to define other things to happen at startup. The other option seems cleaner since it's Logtalk-specific, but a plrc is more general.
Once you have that machinery in place, having a loader file will be a lot more helpful.
NOTE: I don't have Windows to test any of this stuff on, so you may need to make either or both of the following changes to the preceeding:
You may need to use / instead of \ in your paths (or maybe either will work, who knows?). I'd probably try / first because that's how all other systems work.
You may need to use %LOGTALKUSER% instead of $LOGTALKUSER, depending on how Logtalk expands variables.
Hope this helps and I hope you stick with Logtalk, it could use some passionate users like yourself!
I've created a package in Mathematica but I can't seem to get Mathematica to read it in. The Package is of the form:
BeginPackage["name`"]
(function[]::usage)
Begin["`Private'"]
(functions)
End[]
EndPackage[]
I saved this file as a .m. The problem is that after I quit the kernel and then try to read in the package using Needs["name`"], I always get a no::cont error. I've tried saving the file in $BaseUserDirectory and $BaseDirectory, but it still give me a no::cont error:
Needs["name"]
Needs::nocont: "Context \!\(\"name\") was not created when Needs was evaluated."
I've also tried using the built-in File->Install function in Mathematica but it still gives me the same error. Is there something that I need to change with regards to the context?
Any help is much appreciated.
Thank you,
jm
Write the definitions in "Initialization Cells" when you create the package notebook. Otherwise they will be ignored. This worked for me with Version 9 on OS X. In previous versions it was probably not necessary, but I don't remember any more... :-)
It's because the directory of your package is not in $Path. Needs only searches the packages in $Path, while Get can search subdirectories.
I just installed the scheme48 package from macports and have started experiencing. I was watching this youtube video, link here and was attempting to perform some of the examples. In the lecture the professor is running scheme on a Sun terminal. For example, I attempt to do '(first 473)' and get 'Error: undefined variable first'. Now, I'm assuming I haven't loaded the correct package / library or what ever it is called in scheme but am not sure what the syntax and library is. I believe that scheme48 and the scheme version on that sun terminal in the video are not the same and could be part of the problem.
So, what library do I need to use and how do I load it?
Those lecture notes are based on a book called Simply Scheme, and you can find the library code that is used in the book here. Specifically, you need simply.scm.
(But whether it is a good idea to have these kind of overloading functions is debatable. Specifically, note that first is used in a way that is different from many other languages.)