Delete the 3 last line of my txt with bash? [duplicate] - bash

I want to remove some n lines from the end of a file. Can this be done using sed?
For example, to remove lines from 2 to 4, I can use
$ sed '2,4d' file
But I don't know the line numbers. I can delete the last line using
$sed $d file
but I want to know the way to remove n lines from the end. Please let me know how to do that using sed or some other method.

I don't know about sed, but it can be done with head:
head -n -2 myfile.txt

If hardcoding n is an option, you can use sequential calls to sed. For instance, to delete the last three lines, delete the last one line thrice:
sed '$d' file | sed '$d' | sed '$d'

From the sed one-liners:
# delete the last 10 lines of a file
sed -e :a -e '$d;N;2,10ba' -e 'P;D' # method 1
sed -n -e :a -e '1,10!{P;N;D;};N;ba' # method 2
Seems to be what you are looking for.

A funny & simple sed and tac solution :
n=4
tac file.txt | sed "1,$n{d}" | tac
NOTE
double quotes " are needed for the shell to evaluate the $n variable in sed command. In single quotes, no interpolate will be performed.
tac is a cat reversed, see man 1 tac
the {} in sed are there to separate $n & d (if not, the shell try to interpolate non existent $nd variable)

Use sed, but let the shell do the math, with the goal being to use the d command by giving a range (to remove the last 23 lines):
sed -i "$(($(wc -l < file)-22)),\$d" file
To remove the last 3 lines, from inside out:
$(wc -l < file)
Gives the number of lines of the file: say 2196
We want to remove the last 23 lines, so for left side or range:
$((2196-22))
Gives: 2174
Thus the original sed after shell interpretation is:
sed -i '2174,$d' file
With -i doing inplace edit, file is now 2173 lines!
If you want to save it into a new file, the code is:
sed -i '2174,$d' file > outputfile

You could use head for this.
Use
$ head --lines=-N file > new_file
where N is the number of lines you want to remove from the file.
The contents of the original file minus the last N lines are now in new_file

Just for completeness I would like to add my solution.
I ended up doing this with the standard ed:
ed -s sometextfile <<< $'-2,$d\nwq'
This deletes the last 2 lines using in-place editing (although it does use a temporary file in /tmp !!)

To truncate very large files truly in-place we have truncate command.
It doesn't know about lines, but tail + wc can convert lines to bytes:
file=bigone.log
lines=3
truncate -s -$(tail -$lines $file | wc -c) $file
There is an obvious race condition if the file is written at the same time.
In this case it may be better to use head - it counts bytes from the beginning of file (mind disk IO), so we will always truncate on line boundary (possibly more lines than expected if file is actively written):
truncate -s $(head -n -$lines $file | wc -c) $file
Handy one-liner if you fail login attempt putting password in place of username:
truncate -s $(head -n -5 /var/log/secure | wc -c) /var/log/secure

This might work for you (GNU sed):
sed ':a;$!N;1,4ba;P;$d;D' file

Most of the above answers seem to require GNU commands/extensions:
$ head -n -2 myfile.txt
-2: Badly formed number
For a slightly more portible solution:
perl -ne 'push(#fifo,$_);print shift(#fifo) if #fifo > 10;'
OR
perl -ne 'push(#buf,$_);END{print #buf[0 ... $#buf-10]}'
OR
awk '{buf[NR-1]=$0;}END{ for ( i=0; i < (NR-10); i++){ print buf[i];} }'
Where "10" is "n".

With the answers here you'd have already learnt that sed is not the best tool for this application.
However I do think there is a way to do this in using sed; the idea is to append N lines to hold space untill you are able read without hitting EOF. When EOF is hit, print the contents of hold space and quit.
sed -e '$!{N;N;N;N;N;N;H;}' -e x
The sed command above will omit last 5 lines.

It can be done in 3 steps:
a) Count the number of lines in the file you want to edit:
n=`cat myfile |wc -l`
b) Subtract from that number the number of lines to delete:
x=$((n-3))
c) Tell sed to delete from that line number ($x) to the end:
sed "$x,\$d" myfile

You can get the total count of lines with wc -l <file> and use
head -n <total lines - lines to remove> <file>

Try the following command:
n = line number
tail -r file_name | sed '1,nd' | tail -r

This will remove the last 3 lines from file:
for i in $(seq 1 3); do sed -i '$d' file; done;

I prefer this solution;
head -$(gcalctool -s $(cat file | wc -l)-N) file
where N is the number of lines to remove.

sed -n ':pre
1,4 {N;b pre
}
:cycle
$!{P;N;D;b cycle
}' YourFile
posix version

To delete last 4 lines:
$ nl -b a file | sort -k1,1nr | sed '1, 4 d' | sort -k1,1n | sed 's/^ *[0-9]*\t//'

I came up with this, where n is the number of lines you want to delete:
count=`wc -l file`
lines=`expr "$count" - n`
head -n "$lines" file > temp.txt
mv temp.txt file
rm -f temp.txt
It's a little roundabout, but I think it's easy to follow.
Count up the number of lines in the main file
Subtract the number of lines you want to remove from the count
Print out the number of lines you want to keep and store in a temp file
Replace the main file with the temp file
Remove the temp file

For deleting the last N lines of a file, you can use the same concept of
$ sed '2,4d' file
You can use a combo with tail command to reverse the file: if N is 5
$ tail -r file | sed '1,5d' file | tail -r > file
And this way runs also where head -n -5 file command doesn't run (like on a mac!).

#!/bin/sh
echo 'Enter the file name : '
read filename
echo 'Enter the number of lines from the end that needs to be deleted :'
read n
#Subtracting from the line number to get the nth line
m=`expr $n - 1`
# Calculate length of the file
len=`cat $filename|wc -l`
#Calculate the lines that must remain
lennew=`expr $len - $m`
sed "$lennew,$ d" $filename

A solution similar to https://stackoverflow.com/a/24298204/1221137 but with editing in place and not hardcoded number of lines:
n=4
seq $n | xargs -i sed -i -e '$d' my_file

In docker, this worked for me:
head --lines=-N file_path > file_path

Say you have several lines:
$ cat <<EOF > 20lines.txt
> 1
> 2
> 3
[snip]
> 18
> 19
> 20
> EOF
Then you can grab:
# leave last 15 out
$ head -n5 20lines.txt
1
2
3
4
5
# skip first 14
$ tail -n +15 20lines.txt
15
16
17
18
19
20

POSIX compliant solution using ex / vi, in the vein of #Michel's solution above.
#Michel's ed example uses "not-POSIX" Here-Strings.
Increment the $-1 to remove n lines to the EOF ($), or just feed the lines you want to (d)elete. You could use ex to count line numbers or do any other Unix stuff.
Given the file:
cat > sometextfile <<EOF
one
two
three
four
five
EOF
Executing:
ex -s sometextfile <<'EOF'
$-1,$d
%p
wq!
EOF
Returns:
one
two
three
This uses POSIX Here-Docs so it is really easy to modify - especially using set -o vi with a POSIX /bin/sh.
While on the subject, the "ex personality" of "vim" should be fine, but YMMV.

This will remove the last 12 lines
sed -n -e :a -e '1,10!{P;N;D;};N;ba'

Related

Optimize shell script for multiple sed replacements

I have a file containing a list of replacement pairs (about 100 of them) which are used by sed to replace strings in files.
The pairs go like:
old|new
tobereplaced|replacement
(stuffiwant).*(too)|\1\2
and my current code is:
cat replacement_list | while read i
do
old=$(echo "$i" | awk -F'|' '{print $1}') #due to the need for extended regex
new=$(echo "$i" | awk -F'|' '{print $2}')
sed -r "s/`echo "$old"`/`echo "$new"`/g" -i file
done
I cannot help but think that there is a more optimal way of performing the replacements. I tried turning the loop around to run through lines of the file first but that turned out to be much more expensive.
Are there any other ways of speeding up this script?
EDIT
Thanks for all the quick responses. Let me try out the various suggestions before choosing an answer.
One thing to clear up: I also need subexpressions/groups functionality. For example, one replacement I might need is:
([0-9])U|\10 #the extra brackets and escapes were required for my original code
Some details on the improvements (to be updated):
Method: processing time
Original script: 0.85s
cut instead of awk: 0.71s
anubhava's method: 0.18s
chthonicdaemon's method: 0.01s
You can use sed to produce correctly -formatted sed input:
sed -e 's/^/s|/; s/$/|g/' replacement_list | sed -r -f - file
I recently benchmarked various string replacement methods, among them a custom program, sed -e, perl -lnpe and an probably not that widely known MySQL command line utility, replace. replace being optimized for string replacements was almost an order of magnitude faster than sed. The results looked something like this (slowest first):
custom program > sed > LANG=C sed > perl > LANG=C perl > replace
If you want performance, use replace. To have it available on your system, you'll need to install some MySQL distribution, though.
From replace.c:
Replace strings in textfile
This program replaces strings in files or from stdin to stdout. It accepts a list of from-string/to-string pairs and replaces each occurrence of a from-string with the corresponding to-string. The first occurrence of a found string is matched. If there is more than one possibility for the string to replace, longer matches are preferred before shorter matches.
...
The programs make a DFA-state-machine of the strings and the speed isn't dependent on the count of replace-strings (only of the number of replaces). A line is assumed ending with \n or \0. There are no limit exept memory on length of strings.
More on sed. You can utilize multiple cores with sed, by splitting your replacements into #cpus groups and then pipe them through sed commands, something like this:
$ sed -e 's/A/B/g; ...' file.txt | \
sed -e 's/B/C/g; ...' | \
sed -e 's/C/D/g; ...' | \
sed -e 's/D/E/g; ...' > out
Also, if you use sed or perl and your system has an UTF-8 setup, then it also boosts performance to place a LANG=C in front of the commands:
$ LANG=C sed ...
You can cut down unnecessary awk invocations and use BASH to break name-value pairs:
while IFS='|' read -r old new; do
# echo "$old :: $new"
sed -i "s~$old~$new~g" file
done < replacement_list
IFS='|' will give enable read to populate name-value in 2 different shell variables old and new.
This is assuming ~ is not present in your name-value pairs. If that is not the case then feel free to use an alternate sed delimiter.
Here is what I would try:
store your sed search-replace pair in a Bash array like ;
build your sed command based on this array using parameter expansion
run command.
patterns=(
old new
tobereplaced replacement
)
pattern_count=${#patterns[*]} # number of pattern
sedArgs=() # will hold the list of sed arguments
for (( i=0 ; i<$pattern_count ; i=i+2 )); do # don't need to loop on the replacement…
search=${patterns[i]};
replace=${patterns[i+1]}; # … here we got the replacement part
sedArgs+=" -e s/$search/$replace/g"
done
sed ${sedArgs[#]} file
This result in this command:
sed -e s/old/new/g -e s/tobereplaced/replacement/g file
You can try this.
pattern=''
cat replacement_list | while read i
do
old=$(echo "$i" | awk -F'|' '{print $1}') #due to the need for extended regex
new=$(echo "$i" | awk -F'|' '{print $2}')
pattern=${pattern}"s/${old}/${new}/g;"
done
sed -r ${pattern} -i file
This will run the sed command only once on the file with all the replacements. You may also want to replace awk with cut. cut may be more optimized then awk, though I am not sure about that.
old=`echo $i | cut -d"|" -f1`
new=`echo $i | cut -d"|" -f2`
You might want to do the whole thing in awk:
awk -F\| 'NR==FNR{old[++n]=$1;new[n]=$2;next}{for(i=1;i<=n;++i)gsub(old[i],new[i])}1' replacement_list file
Build up a list of old and new words from the first file. The next ensures that the rest of the script isn't run on the first file. For the second file, loop through the list of replacements and perform them each one by one. The 1 at the end means that the line is printed.
{ cat replacement_list;echo "-End-"; cat YourFile; } | sed -n '1,/-End-/ s/$/³/;1h;1!H;$ {g
t again
:again
/^-End-³\n/ {s///;b done
}
s/^\([^|]*\)|\([^³]*\)³\(\n\)\(.*\)\1/\1|\2³\3\4\2/
t again
s/^[^³]*³\n//
t again
:done
p
}'
More for fun to code via sed. Try maybe for a time perfomance because this start only 1 sed that is recursif.
for posix sed (so --posix with GNU sed)
explaination
copy replacement list in front of file content with a delimiter (for line with ³ and for list with -End-) for an easier sed handling (hard to use \n in class character in posix sed.
place all line in buffer (add the delimiter of line for replacement list and -End- before)
if this is -End-³, remove the line and go to final print
replace each first pattern (group 1) found in text by second patttern (group 2)
if found, restart (t again)
remove first line
restart process (t again). T is needed because b does not reset the test and next t is always true.
Thanks to #miku above;
I have a 100MB file with a list of 80k replacement-strings.
I tried various combinations of sed's sequentially or parallel, but didn't see throughputs getting shorter than about a 20-hour runtime.
Instead I put my list into a sequence of scripts like "cat in | replace aold anew bold bnew cold cnew ... > out ; rm in ; mv out in".
I randomly picked 1000 replacements per file, so it all went like this:
# first, split my replace-list into manageable chunks (89 files in this case)
split -a 4 -l 1000 80kReplacePairs rep_
# next, make a 'replace' script out of each chunk
for F in rep_* ; do \
echo "create and make executable a scriptfile" ; \
echo '#!/bin/sh' > run_$F.sh ; chmod +x run_$F.sh ; \
echo "for each chunk-file line, strip line-ends," ; \
echo "then with sed, turn '{long list}' into 'cat in | {long list}' > out" ; \
cat $F | tr '\n' ' ' | sed 's/^/cat in | replace /;s/$/ > out/' >> run_$F.sh ;
echo "and append commands to switch in and out files, for next script" ; \
echo -e " && \\\\ \nrm in && mv out in\n" >> run_$F.sh ; \
done
# put all the replace-scripts in sequence into a main script
ls ./run_rep_aa* > allrun.sh
# make it executable
chmod +x allrun.sh
# run it
nohup ./allrun.sh &
.. which ran in under 5 mins, a lot less than 20 hours !
Looking back, I could have used more pairs per script, by finding how many lines would make up the limit.
xargs --show-limits </dev/null 2>&1 | grep --color=always "actually use:"
Maximum length of command we could actually use: 2090490
So just under 2MB; how many pairs would that be for my script ?
head -c 2090490 80kReplacePairs | wc -l
76923
So it seems I could have used 2 * 40000-line chunks
to expand on chthonicdaemon's solution
live demo
#! /bin/sh
# build regex from text file
REGEX_FILE=some-patch.regex.diff
# test
# set these with "export key=val"
SOME_VAR_NAME=hello
ANOTHER_VAR_NAME=world
escape_b() {
echo "$1" | sed 's,/,\\/,g'
}
regex="$(
(echo; cat "$REGEX_FILE"; echo) \
| perl -p -0 -e '
s/\n#[^\n]*/\n/g;
s/\(\(SOME_VAR_NAME\)\)/'"$(escape_b "$SOME_VAR_NAME")"'/g;
s/\(\(ANOTHER_VAR_NAME\)\)/'"$(escape_b "$ANOTHER_VAR_NAME")"'/g;
s/([^\n])\//\1\\\//g;
s/\n-([^\n]+)\n\+([^\n]*)(?:\n\/([^\n]+))?\n/s\/\1\/\2\/\3;\n/g;
'
)"
echo "regex:"; echo "$regex" # debug
exec perl -00 -p -i -e "$regex" "$#"
prefixing lines with -+/ allows empty "plus" values, and protects leading whitespace from buggy text editors
sample input: some-patch.regex.diff
# file format is similar to diff/patch
# this is a comment
# replace all "a/a" with "b/b"
-a/a
+b/b
/g
-a1|a2
+b1|b2
/sg
# this is another comment
-(a1).*(a2)
+b\1b\2b
-a\na\na
+b
-a1-((SOME_VAR_NAME))-a2
+b1-((ANOTHER_VAR_NAME))-b2
sample output
s/a\/a/b\/b/g;
s/a1|a2/b1|b2/;;
s/(a1).*(a2)/b\1b\2b/;
s/a\na\na/b/;
s/a1-hello-a2/b1-world-b2/;
this regex format is compatible with sed and perl
since miku mentioned mysql replace:
replacing fixed strings with regex is non-trivial,
since you must escape all regex chars,
but you also must handle backslash escapes ...
naive escaper:
echo '\(\n' | perl -p -e 's/([.+*?()\[\]])/\\\1/g'
\\(\n

"grep"ing first 12 of last 24 character from a line

I am trying to extract "first 12 of last 24 character" from a line, i.e.,
for a line:
species,subl,cmp= 1 4 1 s1,torque= 0.41207E-09-0.45586E-13
I need to extract "0.41207E-0".
(I have not written the code, so don't curse me for its formatting. )
I have managed to do this via:
var_s=`grep "species,subl,cmp= $3 $4 $5" $tfile |sed -n '$s/.*\(........................\)$/\1/p'|sed -n '$s/\(............\).*$/\1/p'`
but, is there any more readable way of doing this, rather then counting dots?
EDIT
Thanks to both of you;
so, I have sed,awk grep and bash.
I will run that in loop, for 100's of file.
so, can you also suggest me which one is most efficient, wrt time?
One way with GNU sed (without counting dots):
$ sed -r 's/.*(.{11}).{12}/\1/' file
0.41207E-09
Similarly with GNU grep:
$ grep -Po '.{11}(?=.{12}$)' file
0.41207E-09
Perhaps a python solution may also be helpful:
python -c 'import sys;print "\n".join([a[-24:-13] for a in sys.stdin])' < file
0.41207E-09
I'm not sure your example data and question match up so just change the values in the {n} quantifier accordingly.
Simplest is using pure bash:
echo "${str:(-24):12}"
OR awk can also do that:
awk '{print substr($0, length($0)-23, 12)}' <<< $str
OUTPUT:
0.41207E-09
EDIT: For using bash solution on a file:
while read l; do echo "${l:(-24):12}"; done < file
Another one, less efficient but has the advantage of making you discover new tools
`echo "$str" | rev | cut -b 1-24 | rev | cut -b 1-12
You can use awk to get first 12 characters of last 24 characters from a line:
awk '{substr($0,(length($0)-23))};{print substr($0,(length($0)-10))}' myfile.txt

Getting head to display all but the last line of a file: command substitution and standard I/O redirection

I have been trying to get the head utility to display all but the last line of standard input. The actual code that I needed is something along the lines of cat myfile.txt | head -n $(($(wc -l)-1)). But that didn't work. I'm doing this on Darwin/OS X which doesn't have the nice semantics of head -n -1 that would have gotten me similar output.
None of these variations work either.
cat myfile.txt | head -n $(wc -l | sed -E -e 's/\s//g')
echo "hello" | head -n $(wc -l | sed -E -e 's/\s//g')
I tested out more variations and in particular found this to work:
cat <<EOF | echo $(($(wc -l)-1))
>Hola
>Raul
>Como Esta
>Bueno?
>EOF
3
Here's something simpler that also works.
echo "hello world" | echo $(($(wc -w)+10))
This one understandably gives me an illegal line count error. But it at least tells me that the head program is not consuming the standard input before passing stuff on to the subshell/command substitution, a remote possibility, but one that I wanted to rule out anyway.
echo "hello" | head -n $(cat && echo 1)
What explains the behavior of head and wc and their interaction through subshells here? Thanks for your help.
head -n -1 will give you all except the last line of its input.
head is the wrong tool. If you want to see all but the last line, use:
sed \$d
The reason that
# Sample of incorrect code:
echo "hello" | head -n $(wc -l | sed -E -e 's/\s//g')
fails is that wc consumes all of the input and there is nothing left for head to see. wc inherits its stdin from the subshell in which it is running, which is reading from the output of the echo. Once it consumes the input, it returns and then head tries to read the data...but it is all gone. If you want to read the input twice, the data will have to be saved somewhere.
Using sed:
sed '$d' filename
will delete the last line of the file.
$ seq 1 10 | sed '$d'
1
2
3
4
5
6
7
8
9
For Mac OS X specifically, I found an answer from a comment to this Q&A.
Assuming you are using Homebrew, run brew install coreutils then use the ghead command:
cat myfile.txt | ghead -n -1
Or, equivalently:
ghead -n -1 myfile.txt
Lastly, see brew info coreutils if you'd like to use the commands without the g prefix (e.g., head instead of ghead).
cat myfile.txt | echo $(($(wc -l)-1))
This works. It's overly complicated: you could just write echo $(($(wc -l)-1)) <myfile.txt or echo $(($(wc -l <myfile.txt)-1)). The problem is the way you're using it.
cat myfile.txt | head -n $(wc -l | sed -E -e 's/\s//g')
wc consumes all the input as it's counting the lines. So there is no data left to read in the pipe by the time head is started.
If your input comes from a file, you can redirect both wc and head from that file.
head -n $(($(wc -l <myfile.txt) - 1)) <myfile.txt
If your data may come from a pipe, you need to duplicate it. The usual tool to duplicate a stream is tee, but that isn't enough here, because the two outputs from tee are produced at the same rate, whereas here wc needs to fully consume its output before head can start. So instead, you'll need to use a single tool that can detect the last line, which is a more efficient approach anyway.
Conveniently, sed offers a way of matching the last line. Either printing all lines but the last, or suppressing the last output line, will work:
sed -n '$! p'
sed '$ d'
Here is a one-liner that can get you the desired output, and it can be used more generally for getting all lines from a file except the last n lines.
grep -n "" myfile.txt \ # output the line number for each line
| sort -nr \ # reverse the file by using those line numbers
| sed '1,4d' \ # delete first 4 lines (last 4 of the original file)
| sort -n \ # reverse the reversed file (correct the line order)
| sed 's/^[0-9]*://' # remove the added line numbers
Here is the above command in an actual single line and runnable (can't execute the above due to the added comments):
grep -n "" myfile.txt | sort -nr | sed '1,4d' | sort -n | sed 's/^[0-9]*://'
It's a little cumbersome, and this problem can be solved with more comprehensive commands like ghead, but when you can't or don't want to download such tools, it's nice to be able to do this with the more basic options. I've been in situations where it's simply not an option to get better tools.
awk 'NR>1{print p}{p=$0}'
For this job, an awk one-liner is a bit longer than a sed one.

remove n lines from STDOUT on bash

Do you have any bash solution to remove N lines from stdout?
like a 'head' command, print all lines, only except last N
Simple solition on bash:
find ./test_dir/ | sed '$d' | sed '$d' | sed '$d' | ...
but i need to copy sed command N times
Any better solution?
except awk, python etc...
Use head with a negative number. In my example it will print all lines but last 3:
head -n -3 infile
if head -n -3 filename doesn't work on your system (like mine), you could also try the following approach (and maybe alias it or create a function in your .bashrc)
head -`echo "$(wc -l filename)" | awk '{ print $1 - 3; }'` filename
Where filename and 3 above are your file and number of lines respectively.
The tail command can skip from the end of a file on Mac OS / BSD. tail accepts +/- prefix, which facilitates expression below, which will show 3 lines from the start
tail -n +3 filename.ext
Or, to skip lines from the end of file, use - prefixed, instead.
tail -n -3 filenme.ext
Typically, the default for tail is the - prefix, thus counting from the end of the file. See a similar answer to a different question here: Print a file skipping first X lines in Bash

get the second last line from shell pipeline

I want to get the second last line from the ls -l output.
I know that
ls -l|tail -n 2| head -n 1
can do this, just wondering if sed can do this in just one command?
ls -l|sed -n 'x;$p'
It can't do third to last though, because sed only has 1 hold space, so can only remember one older line. And since it processes the lines one at a time, it does not know the line will be next to last when processing it. awk could return thrid to last, because you can have arbitrary number of variables there, but the script would be much longer than the tail -n X|head -n 1.
In a awk one-liner :
echo -e "aaa\nbbb\nccc\nddd" | awk '{v[c++]=$0}END{print v[c-2]}'
ccc
Try this to delete second-last line in file
sed -e '$!{h;d;}' -e x filename
tac filename | sed -n 2p
-- but involves a pipe, too

Resources