I have four files named source, correct, wrong and not_found. I am trying to write a script in bash wherein I read each line from file named source, store the line as variable x, and match it against a condition.
If it passes, then I need to write that line to file named correct, but the catch is before writing into correct I need to check if the variable x is currently present in file named wrong and if yes delete it and then add the line to file named correct.
I have tried below, but it doesn't modify the file and neither gives me any output:
sed -i '/$x/d' ./wrong
As you have already understood, variables inside '...' are not expanded.
If you replace the single-quotes with double-quotes,
this will delete the matching line from ./wrong:
sed -i "/$x/d" ./wrong
But you also want to add the line to ./correct, if there was a match.
To do that, you can run grep before the sed:
grep "$x" ./wrong >> ./correct
This will have the desired effect,
but sed will overwrite ./wrong, even when it doesn't need to.
You can prevent that like this:
if grep "$x" ./wrong >> ./correct; then
sed -i "/$x/d" ./wrong
fi
Related
I have a file with lot of a strings and one line starts with LIBXML2_INCLUDE
and the file is generated by another program to be specific by ./configure, this line wrongly gives two path and the first path is not correct and i need to remove it. This is how the line appears in file
LIBXML2_INCLUDE=-I/home/gan/Music/wvm/build/level/ast/deliveryx/libxml2//home/gan/Music/wvm/build/level/ast/deliveryx/libxml2/include/libxml2
i need to remove first /home/gan/Music/wvm/build/level/ast/deliveryx/libxml2/
and expected output is
LIBXML2_INCLUDE=-I/home/gan/Music/wvm/build/level/ast/deliveryx/libxml2/include/libxml2
How can i create a bash one liner to accomplish this?
Try like this:
# cat file
SOMEVAR=-I/some/path//some/path
# sed -i -e '/^SOMEVAR=/s,=-I.*//,=-I/,' file
# cat file
SOMEVAR=-I/some/path
#
To be a bit more fancy --
$ cat file
SOMEVAR=-I/some/path//some/path
$ sed -i -e '/^SOMEVAR=/s,=-I\(.*\)/\1$,=-I\1/,' file
$ cat file
SOMEVAR=-I/some/path/
$
I'm trying to temporarily disable dhcp on all connections in a computer using bash, so I need the process to be reversible. My approach is to comment out lines that contain BOOTPROTO=dhcp, and then insert a line below it with BOOTPROTO=none. I'm not sure of the correct syntax to make sed understand the line number stored in the $insertLine variable.
fileList=$(ls /etc/sysconfig/network-scripts | grep ^ifcfg)
path="/etc/sysconfig/network-scripts/"
for file in $fileList
do
echo "looking for dhcp entry in $file"
if [ $(cat $path$file | grep ^BOOTPROTO=dhcp) ]; then
echo "disabling dhcp in $file"
editLine=$(grep -n ^BOOTPROTO=dhcp /$path$file | cut -d : -f 1 )
#comment out the original dhcp value
sed -i "s/BOOTPROTO=dhcp/#BOOTPROTO=dhcp/g" $path$file
#insert a line below it with value of none.
((insertLine=$editLine+1))
sed "$($insertLine)iBOOTPROTO=none" $path$file
fi
done
Any help using sed or other stream editor greatly appreciated. I'm using RHEL 6.
The sed editor should be able to do the job, without having to to be combine bash, grep, cat, etc. Easier to test, and more reliable.
The whole scripts can be simplified to the below. It performs all operations (substitution and the insert) with a single pass using multiple sed scriptlets.
#! /bin/sh
for file in $(grep -l "^BOOTPROTO=dhcp" /etc/sysconfig/network-scripts/ifcfg*) ; do
sed -i -e "s/BOOTPROTO=dhcp/#BOOTPROTO=dhcp/g" -e "/BOOTPROTO=dhcp/i BOOTPROTO=none" $file
done
As side note consider NOT using path as variable to avoid possible confusion with the 'PATH` environment variable.
Writing it up, your attempt with the following fails:
sed "$($insertLine)iBOOTPROTO=none" $path$file
because:
$($insertLine) encloses $insertLIne in a command substitution which when $insertLIne is evaluated it returns a number which is not a command generating an error.
your call to sed does not include the -i option to edit the file $path$file in place.
You can correct the issues with:
sed -i "${insertLine}i BOOTPROTO=none" $path$file
Which is just sed - i (edit in place) and Ni where N is the number of the line to insert followed by the content to insert and finally what file to insert it in. You add ${..} to insertLine to protect the variable name from the i that follows and then the expression is double-quoted to allow variable expansion.
Let me know if you have any further questions.
(and see dash-o's answer for refactoring the whole thing to simply use sed to make the change without spawning 10 other subshells)
I want the string index.xml to be appended when I see something ending in /feed/ and starting with http://a.b.c
Using the command line I wrote, and works, this
echo "http://a.b.c/blabla/feed/" | sed -e 's#\(http://a.b.c/.*/feed/\)#\1index.xml#g'
I don't know how to transform this code so that it works in a script using -i and a file as parameter.
I tried the following but it works only if the searched string is on a line alone, while I need to transform also strings between other text. What's the correct code?
#!/bin/bash
sed -i 's#\("http://a.b.c/.*/feed/"\)#"\1index.xml"#g' $1
I think
#!/bin/bash
sed -i 's#\(http://a.b.c/.*/feed/\)#\1index.xml#g' "$1"
should work. I only removed the wrong double quotes in the command and added the missing ones around the $1.
If an input like http://aXbXc/ is not supposed to trigger the replacement, then you should also escape the dots.
I'm new to OSX command line tools.
I am trying to find a block of text in a file and append this text at the end of all lines in another text file. At run time I don't know what this text will be, I just know it will be located within "BEGINHMM" and "ENDHMM". Also, I don't know the makeup of the destination file, except for that it will not be an empty text file.
The command which finds the block of text of interest is:
sed -n '/<BEGINHMM>/,/<ENDHMM>/p' proto
where "proto" is a text file containing the text of interest.
I've been trying to pipe the output of the above command to another 'sed' command, in the following manner:
xargs -I '{}' sed -i .bak 's/$/{}/' monophones0.txt
but I am getting some bizarre results, I see the "{}" inserted in the text for example.
I've also tried piping to:
xargs -0 sed -i .bak 's/$/&/' monophones0.txt
but I just get the printout (similar to terminal echo) of the text I am trying to grab.
Ultimately I want to loop over several 'proto' files in multiple directories and copy the text between the "BEGINHMM", "ENDHMM" block in each directory, and append the selected text to that directory's monophones.txt lines.
I am running the commands in the terminal, bash, OSX 10.12.2
Any help would be appreciated.
(1) Your sed command is of the form sed -n '/A/,/B/p'; this will include the lines on which A and B occur, even if these strings do not appear at the beginning of the line. This form may have other surprises in store for you as well (what do expect will happen if B is missing or repeated?), but the remainder of this post assumes that's what you want.
(2) It's not clear how you intend to specify the "proto" files, but you do indicate they might be in several directories, so for the remainder of this post, I'll assume they are listed, one per line, in a file named proto.txt in each directory. This will ensure that you don't run into any limitations on command-line length, but the following can easily be modified if you don't want to create such a file.
(3) Here is a script which will use the sed command you've mentioned to copy segments from each of the "proto" files specified in a directory to monophones0.txt in the directory in which the script is executed.
#!/bin/bash
OUT=monophones0.txt
cat proto.txt | while read file
do
if [ -r "$file" ] ; then
sed -n '/<BEGINHMM>/,/<ENDHMM>/p' "$file" >> $OUT
elif [ -n "$file" ] ; then
echo "NOT FOUND: $file" >&2
fi
done
Just like what you did before. tmpfile=$(mktemp); sed -n '/<BEGINHMM>/,/<ENDHMM>/p' proto >$tmpfile; sed -i .bak "r $tmpfile" monophones0.txt; rm $tmpfile. This is the basic idea; there are other checks you need to perform to make this a robust script.
– 4ae1e1
I have a flat file that contains something like this:
11|30646|654387|020751520
11|23861|876521|018277154
11|30645|765418|016658304
Using shell script, I would like to append a string to certain lines in this file, if those lines contain a specific string.
For example, in the above file, for lines containing 23861, I would like to append a string "Processed" at the end, so that the file becomes:
11|30646|654387|020751520
11|23861|876521|018277154|Processed
11|30645|765418|016658304
I could use sed to append the string to all lines in the file, but how do I do it for specific lines ?
I'd do it this way
sed '/\|23861\|/{s/$/|Something/;}' file
This is similar to Marcelo's answer but doesn't require extended expressions and is, I think, a little cleaner.
First, match lines having 23861 between pipes
/\|23861\|/
Then, on those lines, replace the end-of-line with the string |Something
{s/$/|Something/;}
If you want to do more than one of these you could simply list them
sed '/\|23861\|/{s/$/|Something/;};/\|30645\|/{s/$/|SomethingElse/;}' file
Use the following awk-script:
$ awk '/23861/ { $0=$0 "|Processed" } {print}' input
11|30646|654387|020751520
11|23861|876521|018277154|Processed
11|30645|765418|016658304
or, using sed:
$ sed 's/\(.*23861.*$\)/\1|Processed/' input
11|30646|654387|020751520
11|23861|876521|018277154|Processed
11|30645|765418|016658304
Use the substitution command:
sed -i~ -E 's/(\|23861\|.*)/\1|Processed/' flat.file
(Note: the -i~ performs the substitution in-place. Just leave it out if you don't want to modify the original file.)
You can use the shell
while read -r line
do
case "$line" in
*23681*) line="$line|Processed";;
esac
echo "$line"
done < file > tempo && mv tempo file
sed is just a stream version of ed, which has a similar command set but was designed to edit files in place (allegedly interactively, but you wouldn't want to use it that way unless all you had was one of these). Something like
field_2_value=23861
appended_text='|processed'
line_match_regex="^[^|]*|$field_2_value|"
ed "$file" <<EOF
g/$line_match_regex/s/$/$appended_text/
wq
EOF
should get you there.
Note that the $ in .../s/$/... is not expanded by the shell, as are $line_match_regex and $appended_text, because there's no such thing as $/ - instead it's passed through as-is to ed, which interprets it as text to substitute ($ being regex-speak for "end of line").
The syntax to do the same job in sed, should you ever want to do this to a stream rather than a file in place, is very similar except that you don't need the leading g before the regex address:
sed -e "/$line_match_regex/s/$/$appended_text/" "$input_file" >"$output_file"
You need to be sure that the values you put in field_2_value and appended_text never contain slashes, because ed's g and s commands use those for delimiters.
If they might do, and you're using bash or some other shell that allows ${name//search/replace} parameter expansion syntax, you could fix them up on the fly by substituting \/ for every / during expansion of those variables. Because bash also uses / as a substitution delimiter and also uses \ as a character escape, this ends up looking horrible:
appended_text='|n/a'
ed "$file" <<EOF
g/${line_match_regex//\//\\/}/s/$/${appended_text//\//\\/}/
wq
EOF
but it does work. Nnote that both ed and sed require a trailing / after the replacement text in s/search/replace/ while bash's ${name//search/replace} syntax doesn't.