When I start live unit testing in Visual Studio 2015 (15.4.2) I have a message in the output window saying
Build completed(failed)
But if I try to build the the unit test project separately it will build without any warnings and errors.
All in all it says "Live unit tests started". But i don't get "blue" lines which indicate missing unit testing.
The issues was with post build actions. I have removed them and it working fine.
Just ran into a very similar issue myself in Visual Studio 2019, wanted to leave down my solution for those who may be searching for it later down the road.
To get to the actual issue, navigate to the following
Test -> Live Unit Testing -> Options...
Then change the Logging level to Verbose. The next time you build, open the output window (View -> Output or Ctrl + Alt + O), and use the dropdown at the top of the window to select "Live Unit Testing" (Note: you may want to clear this log and run it again to in order to make it easier to interpret). Near the start of the log will be your build events, hopefully including the error you've received.
In my particular case, my error was due to the length of my .csproj path exceeding the 260 character limit. In order to fix this with TFVC, I had to re-map my workspace to a shorter name then build again and my tests appeared and worked fine.
Hopefully this can help save someone else a bit of searching in the future
Ran into a similar issue and indeed the problem seems to be long path limitations.
See #MichaelM's answer, and turn on verbose logging -> this should point you to the project failing to build/ reference.
Suggestions:
try to reduce your path by remapping your project to a shorter path (e.g. D:\x)
try to rename your project name to a shorter version (e.g. CompanyX.FeatureY.ComponentZ.csproj -> Y.CompZ.csproj)
Related
I am trying to run msbuild command line, but, I am getting in the last step of it, the error below (it is in portuguese, but is the same error in the title.
C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\MSBuild\Xamarin\iOS\Xamarin.Shared.targets(227,3): erro
r MSB4044: A tarefa "GetMinimumOSVersion" não recebeu um valor para o parâmetro obrigatório "SdkVersion". [E:\2-PROJETO
S\_ALGORIX\Projetos\ACCORD\SOLUTION\AppAlgorix\AppAlgorix.iOS\AppAlgorix.iOS.csproj]
My msbuild command is:
msbuild AppAlgorix.sln /p:Configuration=AppStore;Platform=iPhone /p:CFBundleVersion=1 /p:CFBundleShortVersionString=2.3.1 /p:ServerAddress={mac ip address} /p:ServerUser={mac user} /p:ServerPassword={mac pwd} /p:BuildIpa=true /p:IpaPackageDir="E:\8-IPAS\ACCORD" /t:Clean;Build /p:ArchiveOnBuild=false /p:IsAppDistribution=false /p:CodesignKey="{App ID identifier}" /p:CodesignProvision="{App Provisioning Profile}"
All the {} data are confidential, so I cropped them.
This command was working one day, but I don´t know when, but after some VS 2019 update, the command, stops working.
I have found some articles about it, but I can´t find a way to resolve this problem.
Onw of those articles is this:
https://www.gitmemory.com/issue/xamarin/xamarin-macios/10109/729614745
My VS 2019 is updated in version 16.8.4.
I have here, about 40 apps to build and get the ipa. I was running a dosbat to resolve it, and get those ipas, more quickly. Not having this msbuild command line working, will take me to a big problem, cause I almost every week have some updates in my apps, and build one by one, will not be a great idea.
And one more thing is.. I can build inside VS 2019, without any problem. The problem happens only via msbuild command line.
I used the post Visual Studio update (16.8.1) lead to CI build failures to resolve the error.
"This has reared it's head again in Visual Studio 2019 version 16.8.3.
Looks like they've moved the problem to: \MSBuild\Xamarin\iOS\Xamarin.Messaging.targets I was able to get
my builds running again by removing the _SayGoodbye dependency on line
52 for the _DisconnectAfterClean target."
Although I have resolved the error, now I cant generate the ios.ipa package. Now, I get only the file projectName.iOS.exe, instead of projectName.iOS.ipa.
I dont know if this workaround is the final solution for this bug, yet.
We resolved this by running the build twice in-a-row. (continue on error - ignore the failed first build)
The first time always fails with the error in the question title, but it must somehow sets things up so that the second build has what it needs to succeed. The IPA is generated, etc.
IMPORTANT: DO NOT CLEAN BETWEEN THE TWO BUILDS
I know this solution is a hack workaround, but I prefer it to manually making changes to the .targets files as I have seen suggested elsewhere (those suggestions did not work in our case anyway). Making changes like that without knowing the internals of the build process intimately could result in unintended side-effects.
NOTE: As this solution involves an expected failed partial first build, it does add to the build time, but it was only about a minute or two longer per build, and at least it works reliably.
Hope this is helpful to someone! 🤗
Goland shows code analysis has been suspended at the top right.
I have tried Following things:
Restart GOLAND,
Re- installing goland
Memory utilisation is also not heavy.
Nothing seems to work yet, any other things that I can check?
Try this:
Press shift twice and in the context window type Inspect Code Actions
Select it and press Enter
Then from another context menu choose Configure Current File Analysis
Choose All Problems
The explanation is in the parenthesis under the Code analysis has been suspended message.
The (Doing file refresh) part refers to the fact that the IDE is currently scanning the known folders such as the project directory, the Go SDK and GOPATH or GOPATH/pkg/mod (aka GOMODCACHE since Go 1.15) to check for any differences from the last IDE usage to the new session.
This should happen in two scenarios: you are starting a completely new IDE session or you have installed a new dependency.
If this takes too long to finish, please check your settings for what the GOPATH or the project directory is or open an issue on our tracker. Please attach the IDE logs zip file from Help | Collect Logs and Diagnostics Data... from the IDE.
How can I make my code build to fail when ReSharper detects an "Error" after code inspection?
I am using C# in Visual Studio 2017 along with ReSharper. I have set the inspection severity of Possible 'System.NullReferenceException' to show as "Error". This setting only shows a red underline for erroneous code, however the VS build still succeeds if I just ignore it. I want to make the build to fail if developer ignores such errors detected by ReSharper inspection.
I'm afraid Resharper seems to not support this option for now.
1.In my opinion, the error level in C#\Potential Code Quality Issues is something like showing a red underline to indicate where there maybe has a risk to help improve your code. And red to indicate this issue deserves attention. Actually,it's something controlled by us, we determine to make them error(red line) or warning(blue line?).
But such a potential code issue can't be recognized by msbuild (build system in vs). So the build will ignore these potential issues and succeeds.
2.For build settings in Resharper, I tried msbuild settings and compiler settings like below:
I set every element in the Potential Code Quality Issues to error. Also, i set null reference related settings like below:
After that I create a simple null reference but the build ignores that and succeeds. Same result when I use Resharper build.(Resharper options=>Tools=>Build=>Build engine) So maybe it's a negative answer :(
This isn't an ideal solution, but JetBrains provide a command line tool called InspectCode which runs their code inspections on your solution and outputs the results in XML or other formats. You could add a custom MSBuild step which runs InspectCode.exe MySolution.sln -o=output.xml, examines output.xml for errors, and fails the build if any are found.
Unfortunately InspectCode is slow and even though the analyses seem to be cached across runs it still takes a significant amount of time. For example, on my solution of 700k lines of code the tool takes 60 seconds on the second run, i.e. with a warm cache. So I don't think this is a viable solution to run on developer machines on every build. It might be acceptable in an automated build system.
I'm very new to Visual Studio and Universal Windows Apps Development. As a part of the course, I have this codeSHOW project provided.
I've cloned it successfully in VS 2015, but I can't run the project using the .sln file. Error:
Here's the error log: http://pastebin.com/c012Bba4
I have no clue how to fix it, and the issues on github go unanswered so I can't expect much from there.
This is an known issue in Visual Studio 2015.
The problem is with files with the exact same name under different folders in a Shared project, which in your case is "resources.resjson".
The only workarounds are either to make the file names unique and if that is not an option, to duplicate the files in the projects instead of sharing them out of the Shared project.
This is a VS2015 specific bug, the solution loads just fine on VS2013. You can get some insight into what is going wrong. First note that your got two message boxes that announced this error. Barely visible in your screenshot.
The failure.txt file gives more hints, you can see the stack traces of the two AggregateException that are raised when the solution is loaded. You'll see that two tasks are trying to load the same resources.resjon project item. Not correct of course, quacks like a standard concurrency bug.
Nothing actually goes wrong, Visual Studio can handle the exception and declares it "Recoverable", the projects are still loaded correctly. And compile just fine. Only other thing you need is the Bing Maps SDK, you can download the correct version here.
If you have VS2013 then prefer that version, it doesn't have this bug and loads the solution without any complaint. And minimizes the odds that you'll run into other quirky problems. Given the current stability of VS2015, not great, it is the best way to avoid losing time. Otherwise just ignore the mishap and close the message boxes, some future Update will no doubt fix the bug. You can report it at connect.microsoft.com if you wish. Not actually necessary I think, it looks like VS is phoning home.
I have a problem which has received plenty of attention which, despite much googling, I have been unable to resolve. I have a Test Project attached to my Visual Studio 2010 MVC 2 Application. When I attempt to run my tests, I get:
"no tests were run because no tests are loaded or the selected tests are disabled."
Following this, I followed the instructions in these posts, to no avail:
MSTest: No tests are run because no tests are loaded or the selected tests are disabled = my GUIDs are right, and the assembly IS being built - I can see the file in explorer.
MSTest Not Finding New Tests = reopening the solution & rebuilding didn't result in any change
http://richallen.blogspot.com/2008/05/ms-test-re-enabling-ignored-tests.html = the tests do not even appear in the test list browser under "loaded tests"
Furthermore, the output console reports:
"Could not load file or assembly 'file://\shared\shared\IT\Development\TPS\TPS.Tests\bin\Debug\TPS.Tests.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515)"
I have confirmed the build settings on the Test Project are the same as those for the main project (Any CPU targeted).
Therefore, is it a problem accessing the resource over network share? Otherwise, does anyone have a suggestion?
If you want to continue using a network share to host assemblies in .NET 4, you can change a Visual Studio configuration option to grant those assemblies full trust. You need to edit C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\devenv.exe.config and add the following line:
<loadFromRemoteSources enabled="true"/>
To the configuration/runtime element. This is described in (slightly) more detail at http://msdn.microsoft.com/en-us/library/dd409252%28VS.100%29.aspx. I would not recommend making this change without understanding the security implications of doing so, some of which are outlined in that MSDN article.
In general, though, I agree with the previous answer. Hosting Visual Studio projects on a network share is going to create a large number of problems for very little benefit.
Having your source code on a share is plain wrong (period) and will lead to all sorts of 'gremlins'.
Do yourself a favour, use Source Code Control and have a local copy of the source code. You will waste a lot less time, and as a bonus you will be able to track who changed what.
If you go with TFS, the Visual Studio TFS Branching Guide 2010 is a valuable resource.
If you use SubVersion, then the Red Bean Book is excellent.
I was running all local but still had the problem. I found that what caused it was removing an xml tag during manual editing.
add:
CodedUITest() inside of tag brackets
on the line immediately above your class where all your test methods are.
add:
TestMethod() inside of tag brackets
on the line immediately above your test methods you want to run.
build project and run.
I tried the following steps while encountering this problem and luckily the issue got resolved...
Close the solution and open the empty VS editor and Check out the testrunconfig file
Open the solution and under CodeCOverage column, uncheck and check the dll's available( these dll's would be having a warning symbol)
Rebuild the solution and now run the test cases.
Hope this resolves the issue... :)
I struggled with this for days, and didn't find the answer (for my situation) anywhere, so though I'd jot down my experience...
So I had the same problem, doing what I thought was local testing on a test project created locally.. (I'm a novice...) but returning the same error mentioned above : /
Anyway it seems that VS2010 had by default placed my project dir within the library folder, which was classified as network, subsequently all files within were 'unavailable offline'.
By moving my project dir to c:// my project files became index-able. (much to my relief!)