I understand that #SpringBootApplication is used to mark the main class of a spring application.
Here I see that it "is equivalent to using #Configuration, #EnableAutoConfiguration and #ComponentScan". But why is there needed a #Configuration if it is already made automatically with #EnableAutoConfiguration.
#EnableAutoConfiguration means Spring boot will look what libraries you use and try to set up beans accordingly. It has nothing to do with #Configuration.
Related
My #SpringBootApplication annotation is present in com.abc.def package.
According to this article , using #SpringBootApplication annotation is equivalent to using #Configuration, #EnableAutoConfiguration, and #ComponentScan with their default attributes :-
https://docs.spring.io/spring-boot/docs/2.0.x/reference/html/using-boot-using-springbootapplication-annotation.html
If i supply my own #ComponentScan, does it add new packages to the default value or completely override the default ?
#SpringBootApplication annotation can component scan classes from packages under Application class belong to . Also you can add #ComponentScan to scan classes not under package Application class belongs to.
#ComponentScan("external.pkg")
#SpringBootApplication
class MyApp{
}
the annotation #SpringBootApplication contains #EnableAutoConfiguration annotation, which will scan through your jar, class, and maven dependencies in the classpath to register beans. If you declare beans cross packages and only want to use specific beans from specific packages, then use #ComponentScan
#ComponentScan gives you a fine-grained package or class level control on what beans you declared would be registered.
The #SpringBootApplication annotation doesn't allow all the filter customizations supported by #ComponentScan. We observed in our application that spring boot was automatically loading a #Configuration class from a library outside the package hierarchy of the class annotated with #SpringBootApplication.
If you want more control, one idea is to omit the #SpringBootApplication annotation and just specify the individual annotations #Configuration, #EnableAutoConfiguration, and #ComponentScan with your desired customizations.
More information is available in Spring Boot's Documentation:
18. Using the #SpringBootApplication Annotation
Good luck
I am learning Spring Boot and have a question with one example in the reference documentation.
Following section of the documentation mentions
6. Using the #SpringBootApplication Annotation
A single #SpringBootApplication annotation can be used to enable those
three features, that is:
#EnableAutoConfiguration: enable Spring Boot’s auto-configuration
mechanism
#ComponentScan: enable #Component scan on the package where the
application is located (see the best practices)
#Configuration: allow to register extra beans in the context or import
additional configuration classes
and the following example to replace this single annotation by any of the features that it enables is bit confusing for me . The example
package com.example.myapplication;
import org.springframework.boot.SpringApplication;
import org.springframework.context.annotation.ComponentScan
import org.springframework.context.annotation.Configuration;
import org.springframework.context.annotation.Import;
#Configuration(proxyBeanMethods = false)
#EnableAutoConfiguration
#Import({ MyConfig.class, MyAnotherConfig.class })
public class Application {
public static void main(String[] args) {
SpringApplication.run(Application.class, args);
}
}
Explanation for the example
In this example, Application is just like any other Spring Boot
application except that #Component-annotated classes and
#ConfigurationProperties-annotated classes are not detected
automatically and the user-defined beans are imported explicitly (see
#Import).
The only major difference I see in the example code above is that it does not have #ComponentScan annotation. I also read in the comments section of an SO answer (Stephane Nicoll May 5 '17 at 11:07) that #Component annotation is not recommended officially to auto detect #ConfigurationProperties. So my assumption is that Spring framework classes with #ConfigurationProperties are not annotated with #Component.
Also I checked the #SpringBootApplication annotation source and couldn't identify anything that should enable the automatic detection of #ConfigurationProperties annotated classes.
The reference document 2.8.3. Enabling #ConfigurationProperties-annotated types section shows the following way to scan and autodetect #ConfigurationProperties
#SpringBootApplication
#ConfigurationPropertiesScan({ "com.example.app", "org.acme.another" })
public class MyApplication {
}
With all these details , I would like to understand
Why is it explicitly mentioned for this example that #ConfigurationProperties-annotated classes are not detected automatically ? and How is #ConfigurationProperties annotated classes automatically detected when #SpringBootApplication is used.
Additional note : I saw a small difference between the prior version of the documentation and the current one. The following reference is missing the current one
Keep in mind that the #EnableConfigurationProperties annotation is
also automatically applied to your project so that any existing bean
annotated with #ConfigurationProperties is configured from the
Environment
Following is what I understand from my analysis.
#ConfigurationProperties annotated types can be registered to the ApplicationContext by
Annotating the class with #ConfigurationProperties with an
annotation that falls in the scope of #ComponentScan (
#Component, #Service and the like ) . Not recommended as per the comment from Stephane Nicoll , which makes sense to me now.
Using annotation
#EnableConfigurationProperties . For this to
work the class annotated with #EnableConfigurationProperties
should be annotated with an annotation that falls in the scope of
#ComponentScan ( #Component, #Service and the like )
Using annotation #ConfigurationPropertiesScan and by making sure
the classes annotated with #ConfigurationProperties is placed
under its radar. The usage is similar to #ComponentScan .
Now , when we replace #SpringBootApplication with individual annotations that it enables and omit #ComponentScan (as in example) , the #EnableConfigurationProperties way (Point 2) of registering the types with #ConfigurationProperties will not work. This probably answers both my questions on why and how .
This was explicitly mentioned probably because the connection between #EnableConfigurationProperties and #ComponentScan is not that obvious for people like me.
Additional details.
The registration of #ConfigurationProperties annotated types when we use #EnableConfigurationProperties happens through of the EnableConfigurationPropertiesRegistrar class that is imported by the annotation
#Target(ElementType.TYPE)
#Retention(RetentionPolicy.RUNTIME)
#Documented
#Import(EnableConfigurationPropertiesRegistrar.class)
public #interface EnableConfigurationProperties {..}
I know that when we annotate a java class as #SpringBootApplication we will have internally annotations #EnableAutoConfiguration and #SpringBootConfiguration but i'm confused what is the difference between them.
I am very much new to spring boot, Can someone please elaborate on this.
public #interface SpringBootConfiguration
Indicates that a class provides Spring Boot application
#Configuration. Can be used as an alternative to the Spring's standard
#Configuration annotation so that configuration can be found
automatically (for example in tests).
from: SpringBootConfiguration docs
public #interface EnableAutoConfiguration
Enable auto-configuration of the Spring Application Context,
attempting to guess and configure beans that you are likely to need.
from: EnableAutoConfiguration docs
So what is the difference?
#SpringBootConfiguration annotation tells us that a class is a configuration class, and #EnableAutoConfiguration automatically configures the Spring application based on its included jar files.
it is meta annotation #SpringBootApplication will have other annotations
https://github.com/spring-projects/spring-boot/blob/master/spring-boot-project/spring-boot-autoconfigure/src/main/java/org/springframework/boot/autoconfigure/SpringBootApplication.java
if #SpringBootApplication is not there applications need to use other annotations on Main class
This question might be trivial but still i'm unable to find a good reason or best practice towards #ComponentScan in Spring
DI works just by self annotating the class then why do we need #ComponentScan
What is the best practice towards this?
#ComponentScan tells Spring in which packages you have annotated classes which should be managed by Spring.
Spring needs to know which packages contain spring beans, otherwise you would have to register each bean individually in(xml file). This is the use of #ComponentScan.
Take a simple example, you have a class and annotated with #Controller in a package package com.abc.xyz; , you have to tell the spring to scan this package for Controller class, if spring didn't scan this package, then spring will not identifies it as a controller class.
Suppose if your dealing with configuration file,
<context:component-scan base-package="com.abc.xyz">
like this,
When spring loads the xml file, this tag will search the all the classes present in the package com.abc.xyz, so any of the class containing #controller, #Repository #Service etc.., if it found then spring will register these annotated class in the bean factory.
Suppose if your using spring boot application,
Then your spring-boot application is annotated with The#SpringBootApplication.
#SpringBootApplication annotation is equivalent to using #Configuration, #EnableAutoConfiguration and #ComponentScan with their default attributes.
One more point if you didn;t specify the base package name in #ComponentScan,
it will scan from the package, where the #Springbootapplication present
In Spring Boot, is there a way to prevent Auto Configuration of all modules? Basically am looking for something like #DisableAutoConfiguration instead of excluding specific configurations with class names.
Auto-configuration is enabled by the #EnableAutoConfiguration annotation. If you don't want to use auto-configuration, then omit this annotation. Note that #SpringBootApplication is itself annotated with #EnableAutoConfiguration so you'll have to avoid using it too. Typically, this would leave your main application class annotated with #ComponentScan and #Configuration.