Installing pyethapp in virtual environment on OSX 10.13.2 with following properties:
Python 2.7.14 pip (9.0.1) setuptools (38.2.4) wheel (0.30.0)
and get following error message:
Collecting pyethapp
Using cached pyethapp-1.5.0-py2.py3-none-any.whl
Collecting ethereum>=1.5.1 (from pyethapp)
Using cached ethereum-2.2.0.tar.gz
Complete output from command python setup.py egg_info:
error in ethereum setup command: 'tests_require' must be a string or list of strings containing valid project/version requirement specifiers; Unordered types are not allowed
Any idea how to resolve this?
I have the same issue on Arch Linux.
It looks like setup.py tests_require uses a set which is not support in setuptools > 38.0.
It should be.
pip install setuptools==37
This trick works for me.
Greetings.
Related
Suddenly pip cant install or find any package, it cant even figure out its own version.
I reinstalled python multiple times, i have the latest version of python 3 and pip. I also tried to clear pip cache. Nothing works, this is really annoying...
Errors:
>pip install redblacktree
ERROR: Could not find a version that satisfies the requirement redblacktree (from versions: none)
ERROR: No matching distribution found for redblacktree
WARNING: There was an error checking the latest version of pip
>pip config list
freeze.user='yes'
global.index-url='http://pypi.org/simple'
global.trusted-host='pypi.org'
install.user='yes'
list.user='yes'
uninstall.user='yes'
I fixed it by locating the pip.ini config file and removing the line index-url = http://pypi.org/simple
I want to install PyMesh on a Windows 10 PC, if possible it should be installed in the side-packages of an interpreter delivered with the IDE we use.
I tried the way to run the setup discribed here
https://pymesh.readthedocs.io/en/latest/installation.html
so the part :
git clone https://github.com/PyMesh/PyMesh.git
cd PyMesh
git submodule update --init
worked without any problems.
I am not sure on windows if I now just can write
set PYMESH_PATH = path
and if i can use the path "...\PyMesh\PyMesh" here?
so i left out this part
I installed numpy and scipy (allready installed)
and nose because it is mentioned in the requirements.txt.
So my numpy scipy and nose versions are
numpy 1.19.1
scipy 1.6.0
nose 1.3.7 (same as requirenments)
and just run the setup.py with admin rights
python .\setup.py install
which also seemed to work but i got an error trying
python -c "import pymesh; pymesh.test()"
from the PyMesh folder
saying ModuleNotFoundError: No module named 'PyMesh'
or if i go up one Folder doing the same
saying AttributeError: module 'PyMesh' has no attribute 'triangle'
I found this link ImportError: No module named PyMesh
but i just dont know what i should type in there
I tried to install via pip by using pip install pymesh
but pip Installer gives me a different library.
So i tried in the docker version and in docker i tried the pymesh.load_mesh method with an stl File
but got
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 2-3: truncated \UXXXXXXXX escape
I dont know if this is just the stl format (expecting binary getting ascii or vice versa)
The stl file itself can be opened so shouldnt be corrupted.
So is there a different way to install pymesh? A wheel would be great. Is it possible to install pymesh to the side-packages of a given Interpreter? Did someone else allready had the same error in Docker and knows the issue
thank you for your help
Recently I have been installed Python 3.8.2 ( Feb 24, 2020) (64bit, Windows). Afterward, I've been updated Pip 20.0.2. And then trying to install Unittest" pip install unittest" but unfortunately it's appearing this message.
Does anyone has been faced this same problem?
C:\Users\BiploB>pip install unittest --user
WARNING: pip is being invoked by an old script wrapper. This will fail in a future version of pip.
Please see https://github.com/pypa/pip/issues/5599 for advice on fixing the underlying issue.
To avoid this problem you can invoke Python with '-m pip' instead of running pip directly.
ERROR: Could not find a version that satisfies the requirement unittest (from versions: none)
ERROR: No matching distribution found for unittest
enter link description here
If I am not mistaken unittest is part of Python's standard library. Meaning, it's available per default, meaning there is no need (and also no way) to install separately.
I have been trying to install obspy and have been running into a lot of problems. I want to install obspy which has a dependency on pyproj. But apparently obspy only works with pyproj 1.9.5.1, which I tried installing using pip (pip3 install pyproj==1.9.5.1), but only got the errors like-
_proj.c:7488:13: error: ‘PyThreadState’ {aka ‘struct _ts’} has no member named ‘exc_traceback’; did you mean ‘curexc_traceback’?
Digging deeper I found that it might be a Cython problem, and installing pyproj directly from github might help, because it would apparently make Cython recompile all the necessary files. Something along the lines of -
pip3 install git+https://github.com/jswhit/pyproj.git
However this one gives the error -
ERROR: Minimum supported proj version is 6.2.0, installed version is 5.2.0.
I di try installing a higher version of libproj-dev (sudo apt install libproj-dev=6.2.0) however it shows that there is no candidate for 6.2.0. I tried downloading the deb file and installing from that using -
sudo apt-get install ~/Downloads/libproj-dev_6.2.0-1_amd64.deb
which just leads to the error -
The following packages have unmet dependencies:
libproj-dev : Depends: libproj15 (= 6.2.0-1) but it is not installable
E: Unable to correct problems, you have held broken packages.
But I think this is not the right way to install for me anyway, since I need a specific version. Hence I tried installing directly from the tarball of the release -
pip3 install https://github.com/pyproj4/pyproj/archive/v1.9.5.1rel.tar.gz
Which leads to the first error I had, evidently due to Cython.
With errors on everything I tried to do to fix this, I am not sure what even is relevant to my problem now.
Any help is appreciated, and if this site is not the correct place for this question, please help me migrate it to its proper destination.
I am on Ubuntu 18.10.
The problem is, that Cython-generated c-files don't work for Python-3.7 if generated with Cython versions up to 0.27.3 (at least): The setup.py of pyproj (at least in the version 1.9.5.1) doesn't regenerate the_proj.c, which is generated with Cython 0.23.2 and thus the installation cannot succeed.
You have the following options:
stay on Python3.6 where everything works out of the box.
regenerate _proj.c with a current Cython-version.
For the second option:
download and unzip your prefered version from https://github.com/pyproj4/pyproj/releases/tag/v1.9.5.1rel and switch to the created folder pyproj-1.9.5.1rel.
check, that the cython-version is >=0.27.3. via cython --version.
regenerate the _proj.c file via cython -3 _proj.pyx (_proj.pyx looks like Python3-code, but also language_level=2 (i.e. cython -2 _proj.pyx) will probably work.
install running pip install .
pyproj 1.9.5.1 was release at Jan 7, 2016. At that time, the latest version Python was 3.5. In my tests. pyproj 1.9.5.1 failed to be installed on Python 3.7.4, but succeeded on Python 3.5.7.
You need to create a environment with Python 3.5 by pyenv or conda.
References
pyproj 1.9.5.1 release
Python release history
I'm a total newbie concerning Python and I have trouble installing Scrapy on Mac OS X 10.7. I've tried a lot of different things, but in summary, when I run:
scrapy startproject tutorial
I've got these errors :
ImportError: dlopen(/Library/Python/2.7/site-packages/lxml/etree.so, 2): Symbol not found: ___xmlStructuredErrorContext
Referenced from: /Library/Python/2.7/site-packages/lxml/etree.so
Expected in: flat namespace
in /Library/Python/2.7/site-packages/lxml/etree.so
After a lot of googling, I've followed this post and tried:
python setup.py build --static-deps --libxml2-version=2.7.8 && pip install lxml
but it tells me:
RuntimeError: ERROR: Trying to build without Cython, but pre-generated 'src/lxml/lxml.etree.c' is not available (pass --without-cython to ignore this error).
And if I run the same command with the —without-cython option, I get:
error: command 'llvm-gcc-4.2' failed with exit status 1
(though I've installed XCode command line tools)
Thanks in advance for your help !
(fyi, I am using MacPorts and pip install…)
You mention Macports at the end and also pip. I think you are mixing up packaging and installation methods.
The first import error should not be seen using a macports python as it puts its libraries under /opt/
As you have started on macports I would use the easy way
port install py27-scrapy
This will install all the needed packages (including python and lxml) to get scrapyto work.
To run scrapy you would need to use the macports python in /opt/local/bin/python2.7. This can be set as the default python if /opt/local/bin is on your path and you run port select to choose this as the python found. The scrapy executable script is /opt/local/bin/scrapy-2.7 Version numbers are used because you can have multiple versions of python working at once.