Related
This question already has answers here:
Assign output of a program to a variable using a MS batch file
(12 answers)
How to set commands output as a variable in a batch file [duplicate]
(9 answers)
Closed 9 months ago.
I'm looking to get the result of a command as a variable in a Windows batch script (see how to get the result of a command in bash for the bash scripting equivalent). A solution that will work in a .bat file is preferred, but other common windows scripting solutions are also welcome.
The humble for command has accumulated some interesting capabilities over the years:
D:\> FOR /F "delims=" %i IN ('date /t') DO set today=%i
D:\> echo %today%
Sat 20/09/2008
Note that "delims=" overwrites the default space and tab delimiters so that the output of the date command gets gobbled all at once.
To capture multi-line output, it can still essentially be a one-liner (using the variable lf as the delimiter in the resulting variable):
REM NB:in a batch file, need to use %%i not %i
setlocal EnableDelayedExpansion
SET lf=-
FOR /F "delims=" %%i IN ('dir \ /b') DO if ("!out!"=="") (set out=%%i) else (set out=!out!%lf%%%i)
ECHO %out%
To capture a piped expression, use ^|:
FOR /F "delims=" %%i IN ('svn info . ^| findstr "Root:"') DO set "URL=%%i"
If you have to capture all the command output you can use a batch like this:
#ECHO OFF
IF NOT "%1"=="" GOTO ADDV
SET VAR=
FOR /F %%I IN ('DIR *.TXT /B /O:D') DO CALL %0 %%I
SET VAR
GOTO END
:ADDV
SET VAR=%VAR%!%1
:END
All output lines are stored in VAR separated with "!".
But if only a single-line console-output is expected, try:
#ECHO off
#SET MY_VAR=
FOR /F %%I IN ('npm prefix') DO #SET "MY_VAR=%%I"
#REM Do something with MY_VAR variable...
#John: is there any practical use for this? I think you should watch PowerShell or any other programming language capable to perform scripting tasks easily (Python, Perl, PHP, Ruby)
To get the current directory, you can use this:
CD > tmpFile
SET /p myvar= < tmpFile
DEL tmpFile
echo test: %myvar%
It's using a temp-file though, so it's not the most pretty, but it certainly works! 'CD' puts the current directory in 'tmpFile', 'SET' loads the content of tmpFile.
Here is a solution for multiple lines with "array's":
#echo off
rem ---------
rem Obtain line numbers from the file
rem ---------
rem This is the file that is being read: You can replace this with %1 for dynamic behaviour or replace it with some command like the first example i gave with the 'CD' command.
set _readfile=test.txt
for /f "usebackq tokens=2 delims=:" %%a in (`find /c /v "" %_readfile%`) do set _max=%%a
set /a _max+=1
set _i=0
set _filename=temp.dat
rem ---------
rem Make the list
rem ---------
:makeList
find /n /v "" %_readfile% >%_filename%
rem ---------
rem Read the list
rem ---------
:readList
if %_i%==%_max% goto printList
rem ---------
rem Read the lines into the array
rem ---------
for /f "usebackq delims=] tokens=2" %%a in (`findstr /r "\[%_i%]" %_filename%`) do set _data%_i%=%%a
set /a _i+=1
goto readList
:printList
del %_filename%
set _i=1
:printMore
if %_i%==%_max% goto finished
set _data%_i%
set /a _i+=1
goto printMore
:finished
But you might want to consider moving to another more powerful shell or create an application for this stuff. It's stretching the possibilities of the batch files quite a bit.
you need to use the SET command with parameter /P and direct your output to it.
For example see http://www.ss64.com/nt/set.html. Will work for CMD, not sure about .BAT files
From a comment to this post:
That link has the command "Set /P
_MyVar=<MyFilename.txt" which says it will set _MyVar to the first line
from MyFilename.txt. This could be
used as "myCmd > tmp.txt" with "set
/P myVar=<tmp.txt". But it will only
get the first line of the output, not
all the output
Example to set in the "V" environment variable the most recent file
FOR /F %I IN ('DIR *.* /O:D /B') DO SET V=%I
in a batch file you have to use double prefix in the loop variable:
FOR /F %%I IN ('DIR *.* /O:D /B') DO SET V=%%I
I would like to add a remark to the above solutions:
All these syntaxes work perfectly well IF YOUR COMMAND IS FOUND WITHIN THE PATH or IF THE COMMAND IS A cmdpath WITHOUT SPACES OR SPECIAL CHARACTERS.
But if you try to use an executable command located in a folder which path contains special characters then you would need to enclose your command path into double quotes (") and then the FOR /F syntax does not work.
Examples:
$ for /f "tokens=* USEBACKQ" %f in (
`""F:\GLW7\Distrib\System\Shells and scripting\f2ko.de\folderbrowse.exe"" Hello '"F:\GLW7\Distrib\System\Shells and scripting"'`
) do echo %f
The filename, directory name, or volume label syntax is incorrect.
or
$ for /f "tokens=* USEBACKQ" %f in (
`"F:\GLW7\Distrib\System\Shells and scripting\f2ko.de\folderbrowse.exe" "Hello World" "F:\GLW7\Distrib\System\Shells and scripting"`
) do echo %f
'F:\GLW7\Distrib\System\Shells' is not recognized as an internal or external command, operable program or batch file.
or
`$ for /f "tokens=* USEBACKQ" %f in (
`""F:\GLW7\Distrib\System\Shells and scripting\f2ko.de\folderbrowse.exe"" "Hello World" "F:\GLW7\Distrib\System\Shells and scripting"`
) do echo %f
'"F:\GLW7\Distrib\System\Shells and scripting\f2ko.de\folderbrowse.exe"" "Hello' is not recognized as an internal or external command, operable program or batch file.
In that case, the only solution I found to use a command and store its result in a variable is to set (temporarily) the default directory to the one of command itself :
pushd "%~d0%~p0"
FOR /F "tokens=* USEBACKQ" %%F IN (
`FOLDERBROWSE "Hello world!" "F:\GLW7\Distrib\System\Layouts (print,display...)"`
) DO (SET MyFolder=%%F)
popd
echo My selected folder: %MyFolder%
The result is then correct:
My selected folder: F:\GLW7\Distrib\System\OS install, recovery, VM\
Press any key to continue . . .
Of course in the above example, I assume that my batch script is located in the same folder as the one of my executable command so that I can use the "%~d0%~p0" syntax. If this is not your case, then you have to find a way to locate your command path and change the default directory to its path.
NB: For those who wonder, the sample command used here (to select a folder) is FOLDERBROWSE.EXE. I found it on the web site f2ko.de (http://f2ko.de/en/cmd.php).
If anyone has a better solution for that kind of commands accessible through a complex path, I will be very glad to hear of it.
Gilles
Just use the result from the FOR command. For example (inside a batch file):
for /F "delims=" %%I in ('dir /b /a-d /od FILESA*') do (echo %%I)
You can use the %%I as the value you want. Just like this: %%I.
And in advance the %%I does not have any spaces or CR characters and can be used for comparisons!!
If you're looking for the solution provided in Using the result of a command as an argument in bash?
then here is the code:
#echo off
if not "%1"=="" goto get_basename_pwd
for /f "delims=X" %%i in ('cd') do call %0 %%i
for /f "delims=X" %%i in ('dir /o:d /b') do echo %%i>>%filename%.txt
goto end
:get_basename_pwd
set filename=%~n1
:end
This will call itself with the result of the CD command, same as pwd.
String extraction on parameters will return the filename/folder.
Get the contents of this folder and append to the filename.txt
[Credits]: Thanks to all the other answers and some digging on the Windows XP commands page.
#echo off
ver | find "6.1." > nul
if %ERRORLEVEL% == 0 (
echo Win7
for /f "delims=" %%a in ('DIR "C:\Program Files\Microsoft Office\*Outlook.EXE" /B /P /S') do call set findoutlook=%%a
%findoutlook%
)
ver | find "5.1." > nul
if %ERRORLEVEL% == 0 (
echo WinXP
for /f "delims=" %%a in ('DIR "C:\Program Files\Microsoft Office\*Outlook.EXE" /B /P /S') do call set findoutlook=%%a
%findoutlook%
)
echo Outlook dir: %findoutlook%
"%findoutlook%"
You can capture all output in one variable, but the lines will be separated by a character of your choice (# in the example below) instead of an actual CR-LF.
#echo off
setlocal EnableDelayedExpansion
for /f "delims=" %%i in ('dir /b') do (
if "!DIR!"=="" (set DIR=%%i) else (set DIR=!DIR!#%%i)
)
echo directory contains:
echo %DIR%
Second version, if you need to print the contents out line-by-line. This takes advanted of the fact that there won't be duplicate lines of output from "dir /b", so it may not work in the general case.
#echo off
setlocal EnableDelayedExpansion
set count=0
for /f "delims=" %%i in ('dir /b') do (
if "!DIR!"=="" (set DIR=%%i) else (set DIR=!DIR!#%%i)
set /a count = !count! + 1
)
echo directory contains:
echo %DIR%
for /l %%c in (1,1,%count%) do (
for /f "delims=#" %%i in ("!DIR!") do (
echo %%i
set DIR=!DIR:%%i=!
)
)
#echo off
setlocal EnableDelayedExpansion
FOR /F "tokens=1 delims= " %%i IN ('echo hola') DO (
set TXT=%%i
)
echo 'TXT: %TXT%'
the result is 'TXT: hola'
You should use the for command, here is an example:
#echo off
rem Commands go here
exit /b
:output
for /f "tokens=* useback" %%a in (`%~1`) do set "output=%%a"
and you can use call :output "Command goes here" then the output will be in the %output% variable.
Note: If you have a command output that is multiline, this tool will set the output to the last line of your multiline command.
Please refer to this http://technet.microsoft.com/en-us/library/bb490982.aspx which explains what you can do with command output.
In a Windows cmd batch script named my.bat, I want to execute a command for all the files in the current directory except for the batch file my.bat.
I use below command in my.bat currently to run the command only for *.txt *.ppt, but really as new files of different extensions might be added to the folder and hence execution of this command by excluding one type of file extension (in my case *.bat) would be more readable/helpful.
FOR /F "delims=|" %%i IN ('dir /b *.txt *.ppt') DO echo %%i
Question is: How do I exclude that file alone with that particular file extension and make the for command execute on all files of all extensions except the excluded one?
FOR /F "tokens=* delims=|" %%i IN ('dir /b *.*') do if not %%~xi==.bat echo %%i
I have added tokens=* in as well otherwise you won't get full filenames if they have spaces.
To echo without the dot
setlocal enabledelayedexpansion
FOR /F "tokens=* delims=|" %%i IN ('dir /b *.*') do (
set e=%%~xi
set e=!e:.=!
echo !e!
)
This is providing that the file doesn't have any other dots, otherwise it will remove them too. This is a bit more sturdy than just removing the 4th character from the end though, as not all files have a 3 character extension.
You could pass the output of the dir /b command through findstr, like so:
FOR /F "delims=|" %%i IN ('dir /b ^| findstr /v /r "^my.bat$"') DO echo %%i
The /v option to findstr prints anything that doesn't match the parameter. The match is based on a regular expression that matches only lines that contain my.bat and nothing else.
I would like all the csv files in a directory which filename does not contain word "summary". Inside the command prompt I can type the following command
dir /b my_dir\*.csv | find /V "summary"
When I try to transfer the above command into a batch file I run into a problem in that the pipe command is not supported in the for loop. That is I cannot do the following
FOR /f %%A in ('dir /b my_dir\*.csv | find /V "summary"') do (
rem want to do something here
)
Can somebody shed some light to me on how to solve the problem above?
Thanks in advance!
You need to escape the | character to prevent its being interpreted at the time of parsing the loop command. Use ^ to escape it:
FOR /f "delims=" %%A in ('dir /b "my_dir\*.csv" ^| find /V "summary"') do (
rem do what you want with %%A here
)
Once escaped, the | becomes part of the '-delimited string. It is only interpreted as a special symbol when that string is parsed separately from the loop, as a "sub-command", according to the syntax. And that is done after parsing the loop.
If you get the problem that Gilbeg got "find: /V': No such file or directory" then it's most likely you have cygwin, or similar, in your path and the batch file's not using the Windows find command. If you modify your script to use the absolute path of the Windows find then the error will go away:
FOR /f "delims=" %%A in ('dir /b "my_dir\*.csv" ^| %SYSTEMROOT%\system32\find.exe /V "summary"') do (
rem want to do something here with %%A
)
You can also just embed a double-quoted string inside the single-quotes string, as in:
FOR /f "delims=" %%A in ('"dir /b my_dir\*.csv | find /I /V "summary""') do #(
ECHO Do something with "%%A"
)
have a look at the Windows PowerShell. Not that I have ever used it myself, mind.
I would like to know how to loop through each line in a text file using a Windows batch file and process each line of text in succession.
I needed to process the entire line as a whole. Here is what I found to work.
for /F "tokens=*" %%A in (myfile.txt) do [process] %%A
The tokens keyword with an asterisk (*) will pull all text for the entire line. If you don't put in the asterisk it will only pull the first word on the line. I assume it has to do with spaces.
For Command on TechNet
If there are spaces in your file path, you need to use usebackq. For example.
for /F "usebackq tokens=*" %%A in ("my file.txt") do [process] %%A
From the Windows command line reference:
To parse a file, ignoring commented lines, type:
for /F "eol=; tokens=2,3* delims=," %i in (myfile.txt) do #echo %i %j %k
This command parses each line in Myfile.txt, ignoring lines that begin with a semicolon and passing the second and third token from each line to the FOR body (tokens are delimited by commas or spaces). The body of the FOR statement references %i to get the second token, %j to get the third token, and %k to get all of the remaining tokens.
If the file names that you supply contain spaces, use quotation marks around the text (for example, "File Name"). To use quotation marks, you must use usebackq. Otherwise, the quotation marks are interpreted as defining a literal string to parse.
By the way, you can find the command-line help file on most Windows systems at:
"C:\WINDOWS\Help\ntcmds.chm"
In a Batch File you MUST use %% instead of % : (Type help for)
for /F "tokens=1,2,3" %%i in (myfile.txt) do call :process %%i %%j %%k
goto thenextstep
:process
set VAR1=%1
set VAR2=%2
set VAR3=%3
COMMANDS TO PROCESS INFORMATION
goto :EOF
What this does:
The "do call :process %%i %%j %%k" at the end of the for command passes the information acquired in the for command from myfile.txt to the "process" 'subroutine'.
When you're using the for command in a batch program, you need to use double % signs for the variables.
The following lines pass those variables from the for command to the process 'sub routine' and allow you to process this information.
set VAR1=%1
set VAR2=%2
set VAR3=%3
I have some pretty advanced uses of this exact setup that I would be willing to share if further examples are needed. Add in your EOL or Delims as needed of course.
Improving the first "FOR /F.." answer:
What I had to do was to call execute every script listed in MyList.txt, so it worked for me:
for /F "tokens=*" %A in (MyList.txt) do CALL %A ARG1
--OR, if you wish to do it over the multiple line:
for /F "tokens=*" %A in (MuList.txt) do (
ECHO Processing %A....
CALL %A ARG1
)
Edit: The example given above is for executing FOR loop from command-prompt; from a batch-script, an extra % needs to be added, as shown below:
---START of MyScript.bat---
#echo off
for /F "tokens=*" %%A in ( MyList.TXT) do (
ECHO Processing %%A....
CALL %%A ARG1
)
#echo on
;---END of MyScript.bat---
#MrKraus's answer is instructive. Further, let me add that if you want to load a file located in the same directory as the batch file, prefix the file name with %~dp0. Here is an example:
cd /d %~dp0
for /F "tokens=*" %%A in (myfile.txt) do [process] %%A
NB:: If your file name or directory (e.g. myfile.txt in the above example) has a space (e.g. 'my file.txt' or 'c:\Program Files'), use:
for /F "tokens=*" %%A in ('type "my file.txt"') do [process] %%A
, with the type keyword calling the type program, which displays the contents of a text file. If you don't want to suffer the overhead of calling the type command you should change the directory to the text file's directory. Note that type is still required for file names with spaces.
I hope this helps someone!
The accepted answer is good, but has two limitations.
It drops empty lines and lines beginning with ;
To read lines of any content, you need the delayed expansion toggling technic.
#echo off
SETLOCAL DisableDelayedExpansion
FOR /F "usebackq delims=" %%a in (`"findstr /n ^^ text.txt"`) do (
set "var=%%a"
SETLOCAL EnableDelayedExpansion
set "var=!var:*:=!"
echo(!var!
ENDLOCAL
)
Findstr is used to prefix each line with the line number and a colon, so empty lines aren't empty anymore.
DelayedExpansion needs to be disabled, when accessing the %%a parameter, else exclamation marks ! and carets ^ will be lost, as they have special meanings in that mode.
But to remove the line number from the line, the delayed expansion needs to be enabled.
set "var=!var:*:=!" removes all up to the first colon (using delims=: would remove also all colons at the beginning of a line, not only the one from findstr).
The endlocal disables the delayed expansion again for the next line.
The only limitation is now the line length limit of ~8191, but there seems no way to overcome this.
Or, you may exclude the options in quotes:
FOR /F %%i IN (myfile.txt) DO ECHO %%i
Here's a bat file I wrote to execute all SQL scripts in a folder:
REM ******************************************************************
REM Runs all *.sql scripts sorted by filename in the current folder.
REM To use integrated auth change -U <user> -P <password> to -E
REM ******************************************************************
dir /B /O:n *.sql > RunSqlScripts.tmp
for /F %%A in (RunSqlScripts.tmp) do osql -S (local) -d DEFAULT_DATABASE_NAME -U USERNAME_GOES_HERE -P PASSWORD_GOES_HERE -i %%A
del RunSqlScripts.tmp
If you have an NT-family Windows (one with cmd.exe as the shell), try the FOR /F command.
The accepted anwser using cmd.exe and
for /F "tokens=*" %F in (file.txt) do whatever "%F" ...
works only for "normal" files. It fails miserably with huge files.
For big files, you may need to use Powershell and something like this:
[IO.File]::ReadLines("file.txt") | ForEach-Object { whatever "$_" }
or if you have enough memory:
foreach($line in [System.IO.File]::ReadLines("file.txt")) { whatever "$line" }
This worked for me with a 250 MB file containing over 2 million lines, where the for /F ... command got stuck after a few thousand lines.
For the differences between foreach and ForEach-Object, see Getting to Know ForEach and ForEach-Object.
(credits: Read file line by line in PowerShell )
Modded examples here to list our Rails apps on Heroku - thanks!
cmd /C "heroku list > heroku_apps.txt"
find /v "=" heroku_apps.txt | find /v ".TXT" | findstr /r /v /c:"^$" > heroku_apps_list.txt
for /F "tokens=1" %%i in (heroku_apps_list.txt) do heroku run bundle show rails --app %%i
Full code here.
To print all lines in text file from command line (with delayedExpansion):
set input="path/to/file.txt"
for /f "tokens=* delims=[" %i in ('type "%input%" ^| find /v /n ""') do (
set a=%i
set a=!a:*]=]!
echo:!a:~1!)
Works with leading whitespace, blank lines, whitespace lines.
Tested on Win 10 CMD
This question already has answers here:
Assign output of a program to a variable using a MS batch file
(12 answers)
How to set commands output as a variable in a batch file [duplicate]
(9 answers)
Closed 9 months ago.
I'm looking to get the result of a command as a variable in a Windows batch script (see how to get the result of a command in bash for the bash scripting equivalent). A solution that will work in a .bat file is preferred, but other common windows scripting solutions are also welcome.
The humble for command has accumulated some interesting capabilities over the years:
D:\> FOR /F "delims=" %i IN ('date /t') DO set today=%i
D:\> echo %today%
Sat 20/09/2008
Note that "delims=" overwrites the default space and tab delimiters so that the output of the date command gets gobbled all at once.
To capture multi-line output, it can still essentially be a one-liner (using the variable lf as the delimiter in the resulting variable):
REM NB:in a batch file, need to use %%i not %i
setlocal EnableDelayedExpansion
SET lf=-
FOR /F "delims=" %%i IN ('dir \ /b') DO if ("!out!"=="") (set out=%%i) else (set out=!out!%lf%%%i)
ECHO %out%
To capture a piped expression, use ^|:
FOR /F "delims=" %%i IN ('svn info . ^| findstr "Root:"') DO set "URL=%%i"
If you have to capture all the command output you can use a batch like this:
#ECHO OFF
IF NOT "%1"=="" GOTO ADDV
SET VAR=
FOR /F %%I IN ('DIR *.TXT /B /O:D') DO CALL %0 %%I
SET VAR
GOTO END
:ADDV
SET VAR=%VAR%!%1
:END
All output lines are stored in VAR separated with "!".
But if only a single-line console-output is expected, try:
#ECHO off
#SET MY_VAR=
FOR /F %%I IN ('npm prefix') DO #SET "MY_VAR=%%I"
#REM Do something with MY_VAR variable...
#John: is there any practical use for this? I think you should watch PowerShell or any other programming language capable to perform scripting tasks easily (Python, Perl, PHP, Ruby)
To get the current directory, you can use this:
CD > tmpFile
SET /p myvar= < tmpFile
DEL tmpFile
echo test: %myvar%
It's using a temp-file though, so it's not the most pretty, but it certainly works! 'CD' puts the current directory in 'tmpFile', 'SET' loads the content of tmpFile.
Here is a solution for multiple lines with "array's":
#echo off
rem ---------
rem Obtain line numbers from the file
rem ---------
rem This is the file that is being read: You can replace this with %1 for dynamic behaviour or replace it with some command like the first example i gave with the 'CD' command.
set _readfile=test.txt
for /f "usebackq tokens=2 delims=:" %%a in (`find /c /v "" %_readfile%`) do set _max=%%a
set /a _max+=1
set _i=0
set _filename=temp.dat
rem ---------
rem Make the list
rem ---------
:makeList
find /n /v "" %_readfile% >%_filename%
rem ---------
rem Read the list
rem ---------
:readList
if %_i%==%_max% goto printList
rem ---------
rem Read the lines into the array
rem ---------
for /f "usebackq delims=] tokens=2" %%a in (`findstr /r "\[%_i%]" %_filename%`) do set _data%_i%=%%a
set /a _i+=1
goto readList
:printList
del %_filename%
set _i=1
:printMore
if %_i%==%_max% goto finished
set _data%_i%
set /a _i+=1
goto printMore
:finished
But you might want to consider moving to another more powerful shell or create an application for this stuff. It's stretching the possibilities of the batch files quite a bit.
you need to use the SET command with parameter /P and direct your output to it.
For example see http://www.ss64.com/nt/set.html. Will work for CMD, not sure about .BAT files
From a comment to this post:
That link has the command "Set /P
_MyVar=<MyFilename.txt" which says it will set _MyVar to the first line
from MyFilename.txt. This could be
used as "myCmd > tmp.txt" with "set
/P myVar=<tmp.txt". But it will only
get the first line of the output, not
all the output
Example to set in the "V" environment variable the most recent file
FOR /F %I IN ('DIR *.* /O:D /B') DO SET V=%I
in a batch file you have to use double prefix in the loop variable:
FOR /F %%I IN ('DIR *.* /O:D /B') DO SET V=%%I
I would like to add a remark to the above solutions:
All these syntaxes work perfectly well IF YOUR COMMAND IS FOUND WITHIN THE PATH or IF THE COMMAND IS A cmdpath WITHOUT SPACES OR SPECIAL CHARACTERS.
But if you try to use an executable command located in a folder which path contains special characters then you would need to enclose your command path into double quotes (") and then the FOR /F syntax does not work.
Examples:
$ for /f "tokens=* USEBACKQ" %f in (
`""F:\GLW7\Distrib\System\Shells and scripting\f2ko.de\folderbrowse.exe"" Hello '"F:\GLW7\Distrib\System\Shells and scripting"'`
) do echo %f
The filename, directory name, or volume label syntax is incorrect.
or
$ for /f "tokens=* USEBACKQ" %f in (
`"F:\GLW7\Distrib\System\Shells and scripting\f2ko.de\folderbrowse.exe" "Hello World" "F:\GLW7\Distrib\System\Shells and scripting"`
) do echo %f
'F:\GLW7\Distrib\System\Shells' is not recognized as an internal or external command, operable program or batch file.
or
`$ for /f "tokens=* USEBACKQ" %f in (
`""F:\GLW7\Distrib\System\Shells and scripting\f2ko.de\folderbrowse.exe"" "Hello World" "F:\GLW7\Distrib\System\Shells and scripting"`
) do echo %f
'"F:\GLW7\Distrib\System\Shells and scripting\f2ko.de\folderbrowse.exe"" "Hello' is not recognized as an internal or external command, operable program or batch file.
In that case, the only solution I found to use a command and store its result in a variable is to set (temporarily) the default directory to the one of command itself :
pushd "%~d0%~p0"
FOR /F "tokens=* USEBACKQ" %%F IN (
`FOLDERBROWSE "Hello world!" "F:\GLW7\Distrib\System\Layouts (print,display...)"`
) DO (SET MyFolder=%%F)
popd
echo My selected folder: %MyFolder%
The result is then correct:
My selected folder: F:\GLW7\Distrib\System\OS install, recovery, VM\
Press any key to continue . . .
Of course in the above example, I assume that my batch script is located in the same folder as the one of my executable command so that I can use the "%~d0%~p0" syntax. If this is not your case, then you have to find a way to locate your command path and change the default directory to its path.
NB: For those who wonder, the sample command used here (to select a folder) is FOLDERBROWSE.EXE. I found it on the web site f2ko.de (http://f2ko.de/en/cmd.php).
If anyone has a better solution for that kind of commands accessible through a complex path, I will be very glad to hear of it.
Gilles
Just use the result from the FOR command. For example (inside a batch file):
for /F "delims=" %%I in ('dir /b /a-d /od FILESA*') do (echo %%I)
You can use the %%I as the value you want. Just like this: %%I.
And in advance the %%I does not have any spaces or CR characters and can be used for comparisons!!
If you're looking for the solution provided in Using the result of a command as an argument in bash?
then here is the code:
#echo off
if not "%1"=="" goto get_basename_pwd
for /f "delims=X" %%i in ('cd') do call %0 %%i
for /f "delims=X" %%i in ('dir /o:d /b') do echo %%i>>%filename%.txt
goto end
:get_basename_pwd
set filename=%~n1
:end
This will call itself with the result of the CD command, same as pwd.
String extraction on parameters will return the filename/folder.
Get the contents of this folder and append to the filename.txt
[Credits]: Thanks to all the other answers and some digging on the Windows XP commands page.
#echo off
ver | find "6.1." > nul
if %ERRORLEVEL% == 0 (
echo Win7
for /f "delims=" %%a in ('DIR "C:\Program Files\Microsoft Office\*Outlook.EXE" /B /P /S') do call set findoutlook=%%a
%findoutlook%
)
ver | find "5.1." > nul
if %ERRORLEVEL% == 0 (
echo WinXP
for /f "delims=" %%a in ('DIR "C:\Program Files\Microsoft Office\*Outlook.EXE" /B /P /S') do call set findoutlook=%%a
%findoutlook%
)
echo Outlook dir: %findoutlook%
"%findoutlook%"
You can capture all output in one variable, but the lines will be separated by a character of your choice (# in the example below) instead of an actual CR-LF.
#echo off
setlocal EnableDelayedExpansion
for /f "delims=" %%i in ('dir /b') do (
if "!DIR!"=="" (set DIR=%%i) else (set DIR=!DIR!#%%i)
)
echo directory contains:
echo %DIR%
Second version, if you need to print the contents out line-by-line. This takes advanted of the fact that there won't be duplicate lines of output from "dir /b", so it may not work in the general case.
#echo off
setlocal EnableDelayedExpansion
set count=0
for /f "delims=" %%i in ('dir /b') do (
if "!DIR!"=="" (set DIR=%%i) else (set DIR=!DIR!#%%i)
set /a count = !count! + 1
)
echo directory contains:
echo %DIR%
for /l %%c in (1,1,%count%) do (
for /f "delims=#" %%i in ("!DIR!") do (
echo %%i
set DIR=!DIR:%%i=!
)
)
#echo off
setlocal EnableDelayedExpansion
FOR /F "tokens=1 delims= " %%i IN ('echo hola') DO (
set TXT=%%i
)
echo 'TXT: %TXT%'
the result is 'TXT: hola'
You should use the for command, here is an example:
#echo off
rem Commands go here
exit /b
:output
for /f "tokens=* useback" %%a in (`%~1`) do set "output=%%a"
and you can use call :output "Command goes here" then the output will be in the %output% variable.
Note: If you have a command output that is multiline, this tool will set the output to the last line of your multiline command.
Please refer to this http://technet.microsoft.com/en-us/library/bb490982.aspx which explains what you can do with command output.