Today I updated my XCode to 9.1 and now I can no longer clone bitbucket repos into XCode.
When I try I get "Authorization failed".
I don't know if it related but also today, when I logged into bitbucket I got a message saying I could not longer log in using my username but had ot use my email address.
Previously I would use this link when cloning a repo into XCode:
https://totsubo#bitbucket.org/totsubo/wordscardsnew.git
XCode then automatically sets my username to 'totsubo', and I cannot change it. I enter my password in the password field but after clicking 'done' XCode gives me an 'Authentication failed' error.
Strangely enough if I put the password into the https link, then XCode is able to clone the repo. (https://totsubo:password#bitbucket.org/totsubo/wordscardsnew.git)
I emailed Atlassian and they suggested re-setting my password. This fixed the issue.
Related
I created a new branch manually from Xcode, which for some reason did not show up on the repository, so I made another branch from the GitHub browser manually. Then when trying to commit I'm met with the error:
"The remote repository rejected commit. Make sure you have permission to push to the remote repository and try again."
I've talked to my boss who ensured that I'm given written permission, so we're both confused as to why I can't commit properly.
If you have this option selected in the Email Settings page of GitHub it will prevent you from pushing.
You need to go in to terminal, and then go to your project directory and type these commands.
xcrun git config user.name "your username here"
xcrun git config user.email youremail#somedomain.com
Make sure the user name and emails are the exact ones that you use on github, gitlab etc.
I was using "Personal Access Token" for authentication and was facing the same issue. For some reason, generating a new token and entering it again in Xcode -> Preferences -> Accounts fixed it.
After my upgrade to Xcode 7 the access to my Gitlab repo was denied. I am using HTTPS authentication. When I try to erase and than add a new the repo Xcode gives me an error : Authentication failed because the user name or password was incorrect.
The authentication field is set to Username and Password.
In that question a solution was given but for the SSH authentication:
Cannot push to gitlab from xcode 7
I prefer to use the HTTP method.
I think this is definitely an issue caused by the upgrade. Has someone else encountered that problem and can You share Your solution.
Recently I thought of that issue and tried to add a repository. Since the last time I checked the behaviour I have updated the Xcode to version 7.2. With a great relief I found that the problem has been fixed. However when I tried to commit / push to my repo I encountered an error "Couldn't communicate with a helper application" in Xcode 7". After some digging I found the answer here http://pinkstone.co.uk/how-to-fix-couldnt-communicate-with-a-helper-application-in-xcode-7/
I just followed the instructions and typed :
xcrun git config --global user.email you#yourdomain.com
xcrun git config --global user.name "Your Name Here"
in the terminal and the problem was fixed.
I'm using the latest Github for Mac as a new Git user. When I try to sync a repo (that I first cloned, then created a new branch, commited changes, and then merged with master), I got the error:
Authentication Failed.
You may not have permission to access repo111. Check Preferences to make sure you’re still logged in.
I searched for similar questions, but the answer seemed to be add SSH keys to github, so I followed: https://help.github.com/articles/generating-ssh-keys.
When I do ssh -T git#github.com, I get:
Hi User111! You've successfully authenticated, but GitHub does not provide shell access.
I'm logged in as the correct user, and have rights to the repo, so I'm not sure why I'm not authenticated?
It could be that you entered a password incorrectly and it's stored in your keychain.
For my situation, I was using GitHub for Mac to work with a BitBucket repository. Long story short, I mistyped my BitBucket password and GitHub for Mac could not authenticate (because the password stored in my keychain was wrong).
Thanks to the helpful folks at GitHub, they quickly responded when I asked for help:
Open Keychain Access.app (in /Applications/Utilities) and search for "GitHub for Mac." There should be an entry like "GitHub for Mac — bitbucket.com". Delete that entry
Steps to fix if using GitHub for Mac to manage a BitBucket repo
If you see this:
… then you might have a BitBucket keychain/password problem.
Open Keychain Access.app (in /Applications/Utilities) and search for bitbucket:
Right-click on the entry and get info:
Click on "Access Control" to confirm that it's truly the GitHub for Mac BitBucket password/login keychain item:
Rather than deleting the keychain entry/item, I just edited my password:
You should now be able to use GitHub for Mac without authentication failures. :)
Had the same problem, but it was not a password problem, since other repositories worked just fine.
Finally compared .git/config with a working repository and found this:
This failed:
[remote "origin"]
url = github#github.com/path/to/repository
This worked:
[remote "origin"]
url = https://github.com/path/to/repository
Still have no idea how or why this changed.
I had to try some other stuff after the solutions above didn't work out for me.
Dont know why I got this issue, or why was fixed after:
deleting the existing keys:
.ssh/github-rsa
.ssh/github-rsa.pub
restarting GitHub Desktop, which automatically regens the keys
add new keys to repo host (bitbucket etc)
I had the same problem, then I followed this steps:
Login to BitBucket and go to the repository you want to use
Click the “Clone” button, and change the drop down option to HTTPS.
Copy the command that appears (something like: git clone https://username#bitbucket.org/team-name/repository-name.git)
Open terminal in your mac and navigate to wherever you want the theme files to be stored.
Paste the clone command in the terminal, press enter and then enter your password when requested.
In Github for Mac go to the repositories screen and click the + sign in the status bar.
Select Add Local Repository – and then select the repository of the folder you want to add.
Done
If you have created remote repository on GitHub and merged with local repository or project .
you can add that local repository to GitHub desktop app
than go to Repository > repository settings > Remote >
under remote You'll find primary remote repository (origin)
there's a ssh remote url delete that And
Go to your GitHub account.
Open Your Remote repository
click on Clone or Download
Copy the https URL
paste that in the GitHub desktop app
click on fetch in the Desktop GitHub App
It'll work Great :)
If your password is correct and you still see have this problem, chances are your .git/config file has some miss configuration.
In my case, it had a pushurl value under [remote "origin"] which was not needed (I was working on a cloned project).
Comment that line by adding a # before it and you are good to go :)
Also, if you get an error saying:
This repository is configured for Git LFS but 'git-lfs' was not found on your path. If you no longer wish to use Git LFS, remove this hook by deleting .git/hooks/pre-push
just delete that by doing
rm .git/hooks/pre-push
now you are all set. This happened to me also using github desktop app for mac, with a remote bitbucket repo.
hint: if you commit changes and refresh bitbucket to see the changes, those might not show, but navigate to the root of the project and then back to the file and you'll see the changes. Probably some cache issue but it can drive you mad if you don't know this hint.
Every time I try to push a repository in GitHub with Pycharm the it fails.
Push failed: fatal: Authentication failed for 'https://github.com/(my github repository)/'
In Settings->Version Control->GitHub, I filled the fields Host, Loging and Password (Auth Type: Password). Testing it: "Connection successful"
In Settings->Version Control->Git, Path to Git executable is seted with the full path, SSH executable: Buil-in
Pycharm version 3.1.1
Git version 1.8.4.msysgit.0
On Win 7.
I tried all but it worked me charm :
The problem I had : Every thing was working from terminal and from Github desktop as well.
But when I tried to PUSH/PULL from pycharm it wasn't working.
Reason : It happens because by-default pycharm save password locally in DB.
Work around: Go to File > Settings > Appearance & Behavior > System Settings> Passwords, clicked on 'Do not save..", restarted IntelliJ and VCS asked for password again.
It seems there is some issue (if using https) if username or password contains "some" special characters.
So, I've generated a secondary password ("personal access token") in GitHub's application settings page (using the "Create new token" button), I did copy this token. Then I've selected Auth Type: Token in Settings->Version Control->GitHub, and pasted the token.
Testing it: Connection successful for user . Now the git push works perfectly.
I struggled with this problem for half a day using Git in PyCharm.
Solution: Settings => Version Control => Git => ticked "Use credential helper" and then it worked perfect.
If your username or password has special characters, you can replace it with the Percent-encoding for theses characters.
for example, if your password is "test#2010", you will write it as "test%402010" and the config command will be like this
git config remote.origin.url https://{username}:test%402010#github.com/{repo_username}/{repo_name}.git
So I found the solution to my problem, and I hope this helps:
If you are using KDE, or Gnome, your "KDE Wallet", or "Gnome Keyring" manager will save your password when you push for the first time. However, if you enter the password wrong, these managers (ksshaskpass for KDE) will store the wrong password and will send the wrong password every time.
To fix this, open the appropriate manager and change the password. With KDE, it is in: Kick-off-menu > System Settings > Account Details > KDE Wallet, then click "Launch Wallet Manager", and find "ksshaskpass", expand it, and then expand "Passwords", then find your github registered email address there, click it, and on the right, click on "Show Contents". Now change that value (in case wrong password), then hit save. and you're done!
Now that means you don't have to type in your password each time for https push, and you don't have to use SSH keys either ;)
I came across this once. Turned out that the Web Credentials in the Credentials Manager stored an incorrect password for github.com and gitlab.com.
I removed that and it gave me the option to log in when I added a new repository.
Ok guys, I tried all suggested solutions and they did not worked for me.
I use git bash and bitbucket.
Finally I turned it upsidedown, and it worked - at least that way. I know this is difficult and foolish solution, but it worked.
So the steps:
you have your code on your local machine.
you have your repo /on bitbucket/
Delete your repo or make a new one with new name
Make a readme.md with the help of the /bitbucket's/ dashbord
clone the new repo
copy your files into this new folder which you want to push
do the git bash work (add,commit) and push it to the repo.
In PyCharm go to:
Settings > Version Control > Github > +
add credentials
AND:
Check your open browsers, when logging in from pycharm into GitHub a tab is opened to authorize Jetbrains the access to your Github account.
I am using High Sierra on an old iMac and originally tried to push a new local project to a new remote.
Unable to get authentication working on Terminal I then tried to use PyCharm as a vehicle to save the authentication token from Github.
In the past I was accustomed to the IDE prompting for the use of a token and even suggesting me to open Github.com to generate the appropriate one.
PyCharm was not able to push a new branch but it did not give any such hints for a solution in the error message
12:56 Push failed
git#github.com: Permission denied (publickey).
Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Show details in console
My solution was to go into the settings and there I found the connection to Github unset - and I was able to link a token.
But I also had to set the remote with the HTTPS link. When I tried with the SSH URI it did not work.
Open xcode then click "Connect to a repository"
After entering the URL the button on the bottom changes to clone. FYI The repository is private and should require a github password and userid. Clone button is then clicked.
It asks where to save the file. I choose a location then it comes here:
Always trust github.com is chosen as suggested in another post. Click Continue then get the following:
At this point it has not asked me for my username or password at any time. Looking around here and on other sites it should ask for user id and password at this point but this is all I get.
How can I get to the screen asking me to enter my Github user id and password when cloning a private repository on github.com in xcode?
This is a glitch in xCode. You will have to install git and repair/prepare the repository from the git command line or another git tool then reopen the project in xCode and then it will be recognized.
xCode is great for git when it works but will break sometimes and need manual repair/tweaking of a repository outside of xCode. You should think of the git features of xCode as a great aid to using git but not a complete interface replacement.
You can try that way:
Open Terminal application.
cd to your project directory. (cd /your/project/directory)
Write git clone https/link/for/your/git.
Put password for the git user.
It will start download on your project directory.
It seems to work using the git#github.com:user/repo.git URL format if you have your public SSH key set up properly on your Mac (and the private key is not protected by a passphrase).
When xCode logs in via SSH to clone the repo, it will be able to do so without you having to provide any credentials. Note that this will probably only work where you have SSH (read/write) access to the repo in question. Since with Github you are likely to be forking another project and working on your own fork, this shouldn't be too much of an obstacle though.