If I run these commands from a script:
#my.sh
PWD=bla
sed 's/xxx/'$PWD'/'
...
$ ./my.sh
xxx
bla
it is fine.
But, if I run:
#my.sh
sed 's/xxx/'$PWD'/'
...
$ ./my.sh
$ sed: -e expression #1, char 8: Unknown option to `s'
I read in tutorials that to substitute environment variables from shell you need to stop, and 'out quote' the $varname part so that it is not substituted directly, which is what I did, and which works only if the variable is defined immediately before.
How can I get sed to recognize a $var as an environment variable as it is defined in the shell?
Your two examples look identical, which makes problems hard to diagnose. Potential problems:
You may need double quotes, as in sed 's/xxx/'"$PWD"'/'
$PWD may contain a slash, in which case you need to find a character not contained in $PWD to use as a delimiter.
To nail both issues at once, perhaps
sed 's#xxx#'"$PWD"'#'
In addition to Norman Ramsey's answer, I'd like to add that you can double-quote the entire string (which may make the statement more readable and less error prone).
So if you want to search for 'foo' and replace it with the content of $BAR, you can enclose the sed command in double-quotes.
sed 's/foo/$BAR/g'
sed "s/foo/$BAR/g"
In the first, $BAR will not expand correctly while in the second $BAR will expand correctly.
Another easy alternative:
Since $PWD will usually contain a slash /, use | instead of / for the sed statement:
sed -e "s|xxx|$PWD|"
You can use other characters besides "/" in substitution:
sed "s#$1#$2#g" -i FILE
一. bad way: change delimiter
sed 's/xxx/'"$PWD"'/'
sed 's:xxx:'"$PWD"':'
sed 's#xxx#'"$PWD"'#'
maybe those not the final answer,
you can not known what character will occur in $PWD, / : OR #.
if delimiter char in $PWD, they will break the expression
the good way is replace(escape) the special character in $PWD.
二. good way: escape delimiter
for example:
try to replace URL as $url (has : / in content)
x.com:80/aa/bb/aa.js
in string $tmp
URL
A. use / as delimiter
escape / as \/ in var (before use in sed expression)
## step 1: try escape
echo ${url//\//\\/}
x.com:80\/aa\/bb\/aa.js #escape fine
echo ${url//\//\/}
x.com:80/aa/bb/aa.js #escape not success
echo "${url//\//\/}"
x.com:80\/aa\/bb\/aa.js #escape fine, notice `"`
## step 2: do sed
echo $tmp | sed "s/URL/${url//\//\\/}/"
URL
echo $tmp | sed "s/URL/${url//\//\/}/"
URL
OR
B. use : as delimiter (more readable than /)
escape : as \: in var (before use in sed expression)
## step 1: try escape
echo ${url//:/\:}
x.com:80/aa/bb/aa.js #escape not success
echo "${url//:/\:}"
x.com\:80/aa/bb/aa.js #escape fine, notice `"`
## step 2: do sed
echo $tmp | sed "s:URL:${url//:/\:}:g"
x.com:80/aa/bb/aa.js
With your question edit, I see your problem. Let's say the current directory is /home/yourname ... in this case, your command below:
sed 's/xxx/'$PWD'/'
will be expanded to
sed `s/xxx//home/yourname//
which is not valid. You need to put a \ character in front of each / in your $PWD if you want to do this.
Actually, the simplest thing (in GNU sed, at least) is to use a different separator for the sed substitution (s) command. So, instead of s/pattern/'$mypath'/ being expanded to s/pattern//my/path/, which will of course confuse the s command, use s!pattern!'$mypath'!, which will be expanded to s!pattern!/my/path!. I’ve used the bang (!) character (or use anything you like) which avoids the usual, but-by-no-means-your-only-choice forward slash as the separator.
Dealing with VARIABLES within sed
[root#gislab00207 ldom]# echo domainname: None > /tmp/1.txt
[root#gislab00207 ldom]# cat /tmp/1.txt
domainname: None
[root#gislab00207 ldom]# echo ${DOMAIN_NAME}
dcsw-79-98vm.us.oracle.com
[root#gislab00207 ldom]# cat /tmp/1.txt | sed -e 's/domainname: None/domainname: ${DOMAIN_NAME}/g'
--- Below is the result -- very funny.
domainname: ${DOMAIN_NAME}
--- You need to single quote your variable like this ...
[root#gislab00207 ldom]# cat /tmp/1.txt | sed -e 's/domainname: None/domainname: '${DOMAIN_NAME}'/g'
--- The right result is below
domainname: dcsw-79-98vm.us.oracle.com
VAR=8675309
echo "abcde:jhdfj$jhbsfiy/.hghi$jh:12345:dgve::" |\
sed 's/:[0-9]*:/:'$VAR':/1'
where VAR contains what you want to replace the field with
I had similar problem, I had a list and I have to build a SQL script based on template (that contained #INPUT# as element to replace):
for i in LIST
do
awk "sub(/\#INPUT\#/,\"${i}\");" template.sql >> output
done
If your replacement string may contain other sed control characters, then a two-step substitution (first escaping the replacement string) may be what you want:
PWD='/a\1&b$_' # these are problematic for sed
PWD_ESC=$(printf '%s\n' "$PWD" | sed -e 's/[\/&]/\\&/g')
echo 'xxx' | sed "s/xxx/$PWD_ESC/" # now this works as expected
for me to replace some text against the value of an environment variable in a file with sed works only with quota as the following:
sed -i 's/original_value/'"$MY_ENVIRNONMENT_VARIABLE"'/g' myfile.txt
BUT when the value of MY_ENVIRONMENT_VARIABLE contains a URL (ie https://andreas.gr) then the above was not working.
THEN use different delimiter:
sed -i "s|original_value|$MY_ENVIRNONMENT_VARIABLE|g" myfile.txt
How to remove all occurences of string "???" of a file and save it?
My approach so far:
cat file.txt | sed -ie '/s/???//' file.txt
However I get the following error:
sed: -e expression #1, char 4: unknown command: `?'
You can use this sed command:
sed -i 's/???//g' file.txt
There is no reason to use cat here as sed can directly operate on a file and save it in-line.
Also note that unlike other regex flavors BRE (Basic Regular Expressions) which is default regex engine of sed doesn't treat ? as a special regex meta character hence there is no need to escape ? here.
I have to find a specific text in the file and then replace that text with some new text.
The contents of the file are:
host=100
servers=4
clients=70
I have tried this:
var=$(grep "servers=" /path/to/file)
sed -i "s/${var}/servers=5/g" /path/to/file
But it gives me the error:
sed: -e expression #1, char 2: unterminated `s' command
Note: All I want is to update the value of each of the variable i.e. servers=4 should be replaced by servers=5.
Please help me figure out the solution.
Thanks.
The output of grep ends with a newline character. sed expects the whole command on one line or escaping line breaks.
However, you can easily achieve the complete task with sed only:
sed -i 's/^servers=[0-9]*$/servers=5/' /path/to/file
sed -i.bak "s/servers=[0-9]*/servers=5/" /path/to/file
I am using shell script. My requirement is to find and replace the string. The string contains "/" char as well. I am getting error sed: -e expression #1, char 18: unterminated `s' command. Can someone tell how should i replace the string which has "/"?
#!/bin/bash
...
search_string="../conf/TestSystem/Inst1.xml"
rep="Inst1/Instrument.xml"
sed -i 's|${line}|${rep}/g' MasterConfiguration.xml
I tried using another sed command but that one also gave error sed: -e expression #1, char 13: unknown option to `s'
sed -e "s/${line}/${rep}/g" MasterConfiguration.xml > tempfile
Whenever you deal with shell-variables you have to get them out of the "sed-string":
For example:
sed -e "s/"${line}"/"${rep}"/g" MasterConfiguration.xml > tempfile
Otherwise sed will treat the chars as-is and search for ${line} literally:
As you see, nothing happens here.
Furthermore, if your variables contain / you need to use another delimiter for sed. I tend to use ~ in such a case, but you're free to use other chars - just be consequent and don't mix them like in your first example-sed-command:
sed 's~'${line}'~'${rep}'/g' //WRONG
sed 's~'${line}'~'${rep}'~g' //RIGHT
Combine both and it will work:
You can try this sed,
sed -i "s#${line}#${rep}#g" MasterConfiguration.xml
Problem:
Instead you have,
sed -i "s|${line}|${rep}/g" MasterConfiguration.xml
It should be,
sed -i "s|${line}|${rep}|g" MasterConfiguration.xml
Syntax:
sed "s|pattern|replacement|g"
I need to remove escape character from the string in bash. I get a data structure, which contains url paths with / escaped so I receive the regular link:
http://stackoverflow.com/questions/ask
as one with escaped /:
http:\/\/stackoverflow.com\/questions\/ask
Now I need to remove \ from the second link. For this purpose I tried using sed
`echo '"'${paths[$index]}'"' | sed "s#\\##g"`
But I get an error:
sed: -e expression #1, char 6: unterminated `s' command
If I replace \\ with ie. _ it works like a charm and removes all occurrences of _ in a string. How do I get rid of escape characters in a string using sed?
try this:
.......|sed 's#\\##g'
or:
.......|sed "s#\\\\##g"
EDIT add a test output:
kent$ echo "http:\/\/stackoverflow.com\/questions\/ask"|sed "s#\\\\##g"
http://stackoverflow.com/questions/ask
kent$ echo "http:\/\/stackoverflow.com\/questions\/ask"|sed 's#\\##g'
http://stackoverflow.com/questions/ask
Your question isn't clear about which way round you want so here is both ways:
$ sed 's#/#\\/#g' <<< "http://stackoverflow.com/questions/ask"
http:\/\/stackoverflow.com\/questions\/ask
$ sed 's#\\/#/#g' <<< "http:\/\/stackoverflow.com\/questions\/ask"
http://stackoverflow.com/questions/ask
You don't need to use sed.
paths[index]=${paths[index]//\\/}
or simply
echo ${paths[index]//\\/}
to see the result without modifying the value in-place.
You can use this :
sed 's#\\##g'
But the problem is when you encounter a backslash that you actually want in the string, but is escaped. In that case :
sed 's/\\\\/\x1/' |sed 's/[\]//g' | sed 's/\x1/\\/g'
Replaces the double backslash with with a temp character[SOH], replaces all other backslashes and then restores the backslash that is needed.