I'm trying to install software by booting into a Windows installation to bring up the Command Prompt.
I can't run the msi there!
D:\setup>setup.msi
It says:
Access Is Denied
Is there a way to "automate" the installation with a .bat?
When I need UAC privilege escalation I use the following script:
::::::::::::::::::::::::::::::::::::::::::::
:: Automatically check & get admin rights V2
::::::::::::::::::::::::::::::::::::::::::::
#echo off
CLS
ECHO.
ECHO =============================
ECHO Running Admin shell
ECHO =============================
:init
setlocal DisableDelayedExpansion
set "batchPath=%~0"
for %%k in (%0) do set batchName=%%~nk
set "vbsGetPrivileges=%temp%\OEgetPriv_%batchName%.vbs"
setlocal EnableDelayedExpansion
:checkPrivileges
NET FILE 1>NUL 2>NUL
if '%errorlevel%' == '0' ( goto gotPrivileges ) else ( goto getPrivileges )
:getPrivileges
if '%1'=='ELEV' (echo ELEV & shift /1 & goto gotPrivileges)
ECHO.
ECHO **************************************
ECHO Invoking UAC for Privilege Escalation
ECHO **************************************
ECHO Set UAC = CreateObject^("Shell.Application"^) > "%vbsGetPrivileges%"
ECHO args = "ELEV " >> "%vbsGetPrivileges%"
ECHO For Each strArg in WScript.Arguments >> "%vbsGetPrivileges%"
ECHO args = args ^& strArg ^& " " >> "%vbsGetPrivileges%"
ECHO Next >> "%vbsGetPrivileges%"
ECHO UAC.ShellExecute "!batchPath!", args, "", "runas", 1 >> "%vbsGetPrivileges%"
"%SystemRoot%\System32\WScript.exe" "%vbsGetPrivileges%" %*
exit /B
:gotPrivileges
setlocal & pushd .
cd /d %~dp0
if '%1'=='ELEV' (del "%vbsGetPrivileges%" 1>nul 2>nul & shift /1)
::::::::::::::::::::::::::::
::START
::::::::::::::::::::::::::::
REM In this state it will Run shell as admin (example) - add your code here
ECHO %batchName% Arguments: %1 %2 %3 %4 %5 %6 %7 %8 %9
cmd /k
It will even give you the dialogue if the UAC settings requires it.
CREDIT : winhelponline.com
You cannot call a .msi file directly. You need to call msiexec /i setup.msi.
See: https://technet.microsoft.com/en-us/library/bb490936.aspx
Related
The script that I am using is from here: https://stackoverflow.com/a/12264592/1016343
I have a batch file that is made for installing Office 365 using their click-to-run installer. It will first check if the directory that contains the XML configurations and setup.exe exists. Once that is confirmed, it will begin Elevate.cmd - Version 4. The only modifications I have made were removing the following lines:
ECHO.
ECHO **************************************
ECHO Invoking UAC for Privilege Escalation
ECHO **************************************
CLS
ECHO.
ECHO =============================
ECHO Running Admin shell
ECHO =============================
REM Run shell as admin (example) - put here code as you like
ECHO %batchName% Arguments: P1=%1 P2=%2 P3=%3 P4=%4 P5=%5 P6=%6 P7=%7 P8=%8 P9=%9
cmd /k
My code is supposed to start after these lines:
::::::::::::::::::::::::::::
::START
::::::::::::::::::::::::::::
Whenever I run the batch file, I get a UAC prompt. After I accept the prompt, it closes. To confirm that my code is not executed, I added #echo HELLO! > hello.txt right before call setup.exe %config%, but I could not find the file in the directory. It was not in C:\Windows\System32 either.
Here is my batch file, Install.bat:
#echo off
set directory="<PATH EXCLUDED FOR PRIVACY. ALSO ON A NETWORK DRIVE.>"
if not exist %directory% goto :install_not_found
::::::::::::::::::::::::::::::::::::::::::::
:: Elevate.cmd - Version 4
:: Automatically check & get admin rights
:: see "https://stackoverflow.com/a/12264592/1016343" for description
::::::::::::::::::::::::::::::::::::::::::::
#echo off
:init
setlocal DisableDelayedExpansion
set cmdInvoke=1
set winSysFolder=System32
set "batchPath=%~0"
for %%k in (%0) do set batchName=%%~nk
set "vbsGetPrivileges=%temp%\OEgetPriv_%batchName%.vbs"
setlocal EnableDelayedExpansion
:checkPrivileges
NET FILE 1>NUL 2>NUL
if '%errorlevel%' == '0' ( goto gotPrivileges ) else ( goto getPrivileges )
:getPrivileges
if '%1'=='ELEV' (echo ELEV & shift /1 & goto gotPrivileges)
ECHO Set UAC = CreateObject^("Shell.Application"^) > "%vbsGetPrivileges%"
ECHO args = "ELEV " >> "%vbsGetPrivileges%"
ECHO For Each strArg in WScript.Arguments >> "%vbsGetPrivileges%"
ECHO args = args ^& strArg ^& " " >> "%vbsGetPrivileges%"
ECHO Next >> "%vbsGetPrivileges%"
if '%cmdInvoke%'=='1' goto InvokeCmd
ECHO UAC.ShellExecute "!batchPath!", args, "", "runas", 1 >> "%vbsGetPrivileges%"
goto ExecElevation
:InvokeCmd
ECHO args = "/c """ + "!batchPath!" + """ " + args >> "%vbsGetPrivileges%"
ECHO UAC.ShellExecute "%SystemRoot%\%winSysFolder%\cmd.exe", args, "", "runas", 1 >> "%vbsGetPrivileges%"
:ExecElevation
"%SystemRoot%\%winSysFolder%\WScript.exe" "%vbsGetPrivileges%" %*
exit /B
:gotPrivileges
setlocal & cd /d %~dp0
if '%1'=='ELEV' (del "%vbsGetPrivileges%" 1>nul 2>nul & shift /1)
::::::::::::::::::::::::::::
::START
::::::::::::::::::::::::::::
:: https://www.computerhope.com/forum/index.php?topic=75310.0
:choice
#echo Enter the number for which install you would like:
#echo [1] Office 32-Bit
#echo [c] Cancel
goto :listen
:listen
set /P c=^>
if /I "%c%" EQU "1" (
set config="/configure office_32.xml"
goto: install
)
if /I "%c%" EQU "C" goto :cancel
if /I "%c%" EQU "c" goto :cancel
#echo Invalid entry
goto :listen
:install_not_found
#echo Error: The installation folder could not be found.
goto :cancel
:cancel
#echo Cancelling Installation...
goto :eof
:install
pushd %directory%
elevate
#echo on
call setup.exe %config%
#echo off
popd
#pause
I am using this app called Defender Control. It works with command line switches "DefenderControl.exe /D" to disable Windows Defender and "DefenderControl.exe /E" to enable Windows Defender. I tried creating and modifying other toggle scripts but I cannot make one work. I have very little knowledge on scripting. I plan to add it to the right-click context menu to quickly disable Windows Defender without having to launch the app then disable it. Thanks in advance.
DefenderControl.exe /D
DefenderControl.exe /E
This writes the status to an alternate data stream (technically it's a file, but bound to the batch file), so the status survives reboots:
#echo off
REM get current status:
<"%~f0:status" set /p status=
echo Currently: %status%
if "%status%"=="D" (
defendercontrol.exe /E
echo E>"%~f0:status"
) else (
defendercontrol.exe /D
echo D>"%~f0:status"
)
For the very first run, the status is empty and handled the same, as it were E (goes to the else branch)
The solution for making the script work from the context menu was to elevate it.
#echo off
CLS
ECHO.
:init
setlocal DisableDelayedExpansion
set "batchPath=%~0"
for %%k in (%0) do set batchName=%%~nk
set "vbsGetPrivileges=%temp%\OEgetPriv_%batchName%.vbs"
setlocal EnableDelayedExpansion
:checkPrivileges
NET FILE 1>NUL 2>NUL
if '%errorlevel%' == '0' ( goto gotPrivileges ) else ( goto getPrivileges )
:getPrivileges
if '%1'=='ELEV' (echo ELEV & shift /1 & goto gotPrivileges)
ECHO.
ECHO Set UAC = CreateObject^("Shell.Application"^) > "%vbsGetPrivileges%"
ECHO args = "ELEV " >> "%vbsGetPrivileges%"
ECHO For Each strArg in WScript.Arguments >> "%vbsGetPrivileges%"
ECHO args = args ^& strArg ^& " " >> "%vbsGetPrivileges%"
ECHO Next >> "%vbsGetPrivileges%"
ECHO UAC.ShellExecute "!batchPath!", args, "", "runas", 1 >> "%vbsGetPrivileges%"
"%SystemRoot%\System32\WScript.exe" "%vbsGetPrivileges%" %*
exit /B
:gotPrivileges
setlocal & pushd .
cd /d %~dp0
if '%1'=='ELEV' (del "%vbsGetPrivileges%" 1>nul 2>nul & shift /1)
REM get current status:
<"%userprofile%\defendercontrol.status" set /p status=
echo Currently: %status%
if "%status%"=="D" (
defendercontrol.exe /E
echo E>"%userprofile%\defendercontrol.status"
) else (
defendercontrol.exe /D
echo D>"%userprofile%\defendercontrol.status"
)
I want to make autorun .bat program that automatically performs netsh cmd and save the result in .txt file by the just simple click of a button.
below is what I wrote in notepad and saved as getkey.bat
echo netsh wlan show profile name=wifi_name key=clear >Desktop/savedpasskey.txt
exit
but it is not working
To show the password of your WIFI SSID , you must execute this batch file with admin rights :
#echo off & setlocal enabledelayedexpansion
Set "Copyright=by Hackoo 2017"
Title %~n0 %Copyright%
Mode con cols=75 lines=8
cls & color 0A & echo.
echo ***********************************************
echo %~n0 %Copyright%
echo ***********************************************
echo(
if _%1_==_Main_ goto :Main
Set Count=0
Set L=0
:getadmin
echo %~nx0 : self elevating
set vbs=%temp%\getadmin.vbs
(
echo Set UAC = CreateObject^("Shell.Application"^)
echo UAC.ShellExecute "%~s0", "Main %~sdp0 %*", "", "runas", 1
)> "%vbs%"
"%temp%\getadmin.vbs"
del "%temp%\getadmin.vbs"
goto :eof
::*************************************************************************************
:Main
Call :init
Call :CountLines
Set "PasswordLog=%~dp0Wifi_Passwords_on_%ComputerName%.txt"
%Mod%
echo(
echo ***********************************************
echo %~n0 %Copyright%
echo ***********************************************
echo(
Call :Color 0E " [N][SSID] ================ Password" 1
echo(
(
echo ***********************************************
echo %~n0 %Copyright%
echo ***********************************************
echo(
echo [N][SSID] ==============^> "Password"
echo(
)>"%PasswordLog%"
for /f "skip=2 delims=: tokens=2" %%a in ('netsh wlan show profiles') do (
if not "%%a"=="" (
set "ssid=%%a"
set "ssid=!ssid:~1!"
call :Getpassword "!ssid!"
)
)
echo(
echo Done
If exist "%PasswordLog%" start "" "%PasswordLog%"
pause>nul
exit
::*************************************************************************************
:Getpassword
set "name=%1"
set "name=!name:"=!"
Set "passwd="
for /f "delims=: tokens=2" %%a in ('netsh wlan show profiles %1 key^=clear ^|find /I "Cont"') do (
set "passwd=%%a"
Set /a Count+=1
)
If defined passwd (
set passwd=!passwd:~1!
echo [!Count!][!name!] ====^> "!passwd!"
echo [!Count!][!name!] ====^> "!passwd!" >> "%PasswordLog%"
) else (
Set /a Count+=1
call :color 0C " [!Count!][!name!] The Password is empty" 1
echo [!Count!][!name!] The Password is empty >> "%PasswordLog%"
)
exit /b
::*************************************************************************************
:init
prompt $g
for /F "delims=." %%a in ('"prompt $H. & for %%b in (1) do rem"') do set "BS=%%a"
exit /b
::*************************************************************************************
:color
set nL=%3
if not defined nL echo requires third argument & pause > nul & goto :eof
if %3 == 0 (
<nul set /p ".=%bs%">%2 & findstr /v /a:%1 /r "^$" %2 nul & del %2 2>&1 & goto :eof
) else if %3 == 1 (
echo %bs%>%2 & findstr /v /a:%1 /r "^$" %2 nul & del %2 2>&1 & goto :eof
)
exit /b
::*************************************************************************************
:CountLines
for /f "skip=2 delims=: tokens=2" %%a in ('netsh wlan show profiles') do (
if not "%%a"=="" (
set /a L+=1
)
)
set /a L=!L! + 10
Set Mod=Mode con cols=75 Lines=!L!
exit /b
::*************************************************************************************
This works. You can change the TEMPFILE to wherever you want the file to be created.
SET "TEMPFILE=%USERPROFILE%\Desktop\savedpasskey.txt"
netsh wlan show profile name=wifi_name key=clear >"%TEMPFILE%"
TYPE "%TEMPFILE%"
It was not working because the path you specified to save your output text file was not getting recognized. The below code should work properly.
#echo off
netsh wlan show profile name=wifi_name key=clear >%USERPROFILE%\Desktop\savedpasskey.txt
#pause
It's always better to specify fully qualified path for the files. In this case it will be C:\Users\<User_Name>\Desktop\savedpasskey.txt where %USERPROFILE% will been replaced with C:\Users\<User_Name>.
Remove #pause if you don't want the command prompt to stay on screen after command is executed.
This is our batch file which we have this code but its not running the run.bat file.
Giving Error :
is not recognized as internal or external command
#echo off
SET Identity=%userdomain%\%username%
CALL :ICACLS "%Identity%"
SET mypath=%~dp0
echo %mypath:~0,-1%
runas /noprofile /user:%Identity% "cmd /K %mypath%\run.bat"
Echo Soft
REM --> Check for permissions
>nul 2>&1 "%SYSTEMROOT%\system32\cacls.exe" "%SYSTEMROOT%\system32\config\system"
REM --> If error flag set, we do not have admin.
if '%errorlevel%' NEQ '0'
(
echo Requesting administrative privileges...
goto UACPrompt
) else ( goto gotAdmin )
:UACPrompt
echo Set UAC = CreateObject^("Shell.Application"^) > "%temp%\getadmin.vbs"
echo UAC.ShellExecute "%~s0", "", "", "runas", 1 >> "%temp%\getadmin.vbs"
"%temp%\getadmin.vbs"
exit /B
:gotAdmin
if exist "%temp%\getadmin.vbs" ( del "%temp%\getadmin.vbs" )
pushd "%CD%"
CD /D "%~dp0"
::your code goes here which needs to be run with admin rights::
I have created a batch file for starting a service using sc.exe. But it asks for admin privilege while running. Is there is any code that can be used in batch file to elevate cmd to admin level?
You can do this:
#echo off
>nul 2>&1 "%SYSTEMROOT%\system32\cacls.exe" "%SYSTEMROOT%\system32\config\system"
if %errorlevel% NEQ 0 (GOTO askAdmin)
GOTO gotAdmin
:askAdmin
::batch is being ran as normal user
echo I'm not an admin yet
>nul 2>&1 "%SYSTEMROOT%\system32\cacls.exe" "%SYSTEMROOT%\system32\config\system"
if '%errorlevel%' NEQ '0' (
echo Requesting administrative privileges...
goto UACPrompt
) else ( goto gotAdmin )
:UACPrompt
echo Set UAC = CreateObject^("Shell.Application"^) > "%temp%\getadmin.vbs"
echo UAC.ShellExecute "%~s0", "", "", "runas", 1 >> "%temp%\getadmin.vbs"
"%temp%\getadmin.vbs"
exit /B
:gotAdmin
if exist "%temp%\getadmin.vbs" ( del "%temp%\getadmin.vbs" )
pushd "%CD%"
CD /D "%~dp0"
::batch is being ran as admin
echo Now I'm an admin!
pause
Press Windows Key + X and click Command Prompt (Admin). Click yes if the user control center ask for permission