Command+Shift+/ is a standard macos shortcut:
When activated that shortcut should put the cursor in the Help|Search like this:
However this does nothing in RStudio. So is there a customizable shortcut? I could not find one ..
So is there a way to get that shortcut functionality?
Related
I am trying to display all possible words after putting the cursor in certain place in the code.
The autocomplete list appears when I start writing/typing:
However, I would like to see all suggested words even before typing.
I tried command + space, however it was a system shortcut for Search in macOS:
Any thoughts?
In case you are a CJK user using Mac, Ctrl+Space will not work, since it is used to switch IMEs.
There is another keyboard shortcut for triggering suggestions:
Option+Esc (Mac)
Alt+Esc (Windows)
Also see this post.
VS code version: 1.41.1
I solved this problem using fn+control+space.
Hope it helps you.
"change input source" keyboard shortcut should be disabled
To disable it->
Go to system preferences -> keyboard -> input sources
add a new input source (choose ABC)
Go to shortcuts tab (inside of keyboard settings)
Click on input sources on the left
disable the "select previous input source" shortcut
restart your vs code and now ctrl+space will show quick suggestions.
You can use the following alternative keyboard shortcuts:
⌘+I (mentioned in the official VS Code documentation for "Trigger suggestion")
⌥+esc
fn+control+space
The shortcut for the "Trigger Suggest" command is ⌃Space (ctrl+space) — as mentioned in the comments.
Most default shortcuts can be found in the documentation, which will automatically show the correct keybindings for the system you're on. In other words, if you visit the page on a Mac, you'll see Mac keybindings.
Additionally, you can:
go to Code > Preferences > Keyboard Shortcuts (on a Mac) and search for keybindings based on the command you want to execute
open up "show all commands" (⇧⌘P on a Mac) and search for the command there, allowing you to either view the keybinding for that command, or simply navigate to it directly from the search
Of course you'd have to have some idea of what the command's name might be. And in this case, a search for "suggest" would suffice.
If you use too many keyboard layouts, maybe the MacOS shortcut might be active. You can disabled ^(Ctrl)+Space shortcuts for MacOS.
System Preferences>Keyboard>Shorcuts>Input Sources> Disable Select the previous input source.
You can use next shortcut for change input sources.Ctrl+Alt+Space
when I was set up 2 keyboards with different layouts, and it turn out it overrides the ^+Space behavior, so this is how fix it:
Go to system preferences -> Keyboard -> Keyboard shortcuts
Click on input sources
and disable the "select previous input source" shortcut
Is there any way (or plugin) that would allow me to modify how the windows are embedded into eachother? For instance, let's say I have a window like this:
I want to be able to press a hotkey (e.g. Ctrl + Right Arrow) to make the current window split and go to the right, like this:
I'm basically envisioning a situation just like the later Windows OS' where you can press Win+Arrow to move windows around the screen...
Yes, there is an easy way.
Just go to Tools --> Options --> Environment --> Keyboard.
Now there are essentially four commands that you can bind to your keyboard shortcuts:
Window.NewHorizontalTabGroup
Window.NewVerticalTabGroup
Window.MovetoNextTabGroup
Window.MovetoPreviousTabGroup
You can even assign your own shortcuts to
Window.Float
Window.FloatAll
Window.MoveToMainDocumentGroup
as well if you want.
The Window.Move... commands are in a way the "undo commands" of the Window.New... and Window.Float... ones.
You can do it with the Window - New Vertical Tab Group menu command or assign a shortcut to the Window.NewVerticalTabGroup keyboard command.
On opening PhpStorm's Terminal Tool Window, I would expect to be able to run commands like Ctrl + Tab to switch terminal tabs, or Cmd + 1 to open the Project Tool Window, but my keyboard is stuck inside the Terminal.
Is there a way to release the keyboard from the Terminal so that I can return to regular commands? (Without using Option + F12 to hide the Terminal Tool Window.)
Switching between Terminal tabs can be done using the same shortcut as Editor tabs: Alt+Left/Right on Windows using Default keymap (on Mac it would be Cmd + Shift + [ and Cmd + Shift + ] (or whatever you have got there for Main Menu | Window | Editor Tabs | Select Next/Previous Tab -- you can verify/change it in your Preferences | Keymap)).
Project View tool window shortcut (Alt+1 on Windows or Cmd+1 on Mac) does not work indeed if used in Terminal.. but shortcuts for Favorites or Structure tool windows still work just fine.
Therefore I may suggest to jump to Structure via Alt+7 (Cmd+7 on Mac) first and then just use Esc to get into Editor). P.S. See if recording macro with such sequence will work for you (you can assign custom shortcut to it).
I'd suggest simply adding another keyboard shortcut for accessing the terminal. E.g. ⌘0
F12 is the default shortcut for Mac and Linux OS.
This shortcut will toggle terminal focus. The default F12 shortcut for Mac (dunno about Windows) will not.
You may need to restart PhpStorm to hijack ⌘0 or whatever you choose.
You can access terminal by Alt + F12 on Windows
PHPStorm and other products of Jet-brains are configurable to your liking. you don't need to learn new keyboard shortcut jus configure the as you prefer.
For example for me i use PHPStorm VS code and Sublime text editor for my coding daily.
So it is good to have same key-map on all of your IDES/Text editors
i am on mac and i use these key-map for all of the mentioned above
Command + ! => toggle Explore tab
Command + ~. => toggle Termina tab
Command + 2. => toggle console tab
So to configure any keyboard of your choice this on PHPStorm (macOs)
Hit Command + , and you will be on PHPStorm Preferences
Go to Key-map if you happen to know the current working shortcut on your PHPStorm
then on you right side after the search box there is a keyboard hit it and press the current working key let say by default toggling terminal is option + F12 (please note for some keyboard you need to add function key(fn) that will make it be option/alt + fn + F12)
Hope you will see terminal with keyboard shortcut at the right side, then two finger click/ right click hope you will have a popup menu to add new keyboard shortcut or remove the existing one.
Add your preferred keyboard shortcut first before removing the existing on (why ? since as soon as you remove the keyboard and you firstly got there via that keyboard shortcut the result will refresh and the thing will disappear from the view)
Note some of the new shortcut you prefer will be already in use that should not scare you away. just remove that and remap with a new binding later which you find useful for you.
Apply and ok then you are good to go !
I have tried both ctrl-tab and command-option-tilda, but they won't work.
This will be a very useful keyboard shortcut for me, as I switch between drawer and editor quite often.
option-command-tab will switch focus between editor and file browser
via http://textmate.1073791.n5.nabble.com/keyboard-shortcut-to-open-files-in-file-browser-td28117.html
If you are using TextMate 2.
From the View menu select Show File Browser
the keyboard shorcuts are:
control, option, command D
Ie, specify [ctrl][alt]+v or something...and that would instance vim inside that text editor window... because that would be really cool.
And/Or: is there a way to do it yourself, if you wanted to? Ie, can you attach custom functions to the keyboard keys and whatnot? I noticed that a lot of the Add-Ins seem to be able to kindof accomplish that level of customizability...
There are a few projects that incorporate vim keybindings directly into the Visual Studio editor.
Here's one: VsVim
I'm using VsVim
You download the plugin from the link above, double click on it and it will be installed in all VisualStudios you have installed in your computer.
About toggling VIM in VisualStudio:
I don't think you can enable/disable it per tab or file openned: either is enabled or disabled in all files.
What you could do is this: add a new shortcut to enable or disable it when you need it.
Tools -> Options... -> Environment -> Keyboard
On the "Show commands containing" input type "VsVim.ToggleEnabled". For me this command wasn't bind it with anything. I added the shortcut
Ctrl Q, Ctrl V