My apology if I am asking a beginners question.
May I ask what is the difference between RFC2047 4.2 The "Q" encoding and RFC 2045 6.7 Quoted-Printable Content-Transfer-Encoding?
From RFC2047:
The "Q" encoding is similar to the "Quoted-Printable" content-transfer-encoding defined in RFC 2045.
I am trying to implement decode logic using Ruby. I have read the answer below and am trying to understand why first.gsub('_',' ') is required for Q encoding.
Is there a way to decode q-encoded strings in Ruby?
By reading RFC2047 again, I have realized that the approach below does not decode underscore properly in cases where underscore is encoded as =5F.
decoded = m[3].unpack('M').first.gsub('_',' ')
Instead, as described in the last sentence of RFC2047 4.2 (2):
Note that the "_" always represents hexadecimal 20, even if the SPACE character occupies a different code position in the character set in use.
I have substituted literal underscore back to =20 first, then unpack it.
I have coded as below:
decoded = m[3].gsub('_', '=20').unpack('M').first()
Related
I have a character appearing over the wire that has a hex value and octal value \xb1 and \261.
This is what my header looks like:
From: "\261Central Station <sip#...>"
Looking at the ASCII table the character in the picture is "±":
What I don't understand:
If I try to test the same by passing "±Central Station" in the header I see it converted to "\xC2\xB1". Why?
How can I have "\xB1" or "\261" appearing over the wire instead of "\xC2\xB1".
e. If I try to print "\xB1" or "\261" I never see "±" being printed. But if I print "\u00b1" it prints the desired character, I'm assuming because "\u00b1" is the Unicode format.
From the page you linked to:
The extended ASCII codes (character code 128-255)
There are several different variations of the 8-bit ASCII table. The table below is according to ISO 8859-1, also called ISO Latin-1.
That's worth reading twice. The character codes 128–255 aren't ASCII (ASCII is a 7-bit encoding and ends at 127).
Assuming that you're correct that the character in question is ± (it's likely, but not guaranteed), your text could be encoded ISO 8850-1 or, as #muistooshort kindly pointed out in the comments, any of a number of other ISO 8859-X or CP-12XX (Windows-12XX) encodings. We do know, however, that the text isn't (valid) UTF-8, because 0xb1 on its own isn't a valid UTF-8 character.
If you're lucky, whatever client is sending this text specified the encoding in the Content-Type header.
As to your questions:
If I try to test the same by passing ±Central Station in header I see it get converted to \xC2\xB1. Why?
The text you're passing is in UTF-8, and the bytes that represent ± in UTF-8 are 0xC2 0xB1.
How can I have \xB1 or \261 appearing over the wire instead of \xC2\xB1?
We have no idea how you're testing this, so we can't answer this question. In general, though: Either send the text encoded as ISO 8859-1 (Encoding::ISO_8859_1 in Ruby), or whatever encoding the original text was in, or as raw bytes (Encoding::ASCII_8BIT or Encoding::BINARY, which are aliases for each other).
If I try to print \xB1 or \261 I never see ± being printed. But if I print \u00b1 it prints the desired character. (I'm assuming because \u00b1 is the unicode format but I will love If some can explain this in detail.)
That's not a question, but the reason is that \xB1 (\261) is not a valid UTF-8 character. Some interfaces will print � for invalid characters; others will simply elide them. \u00b1, on the other hand, is a valid Unicode code point, which Ruby knows how to represent in UTF-8.
Brief aside: UTF-8 (like UTF-16 and UTF-32) is a character encoding specified by the Unicode standard. U+00B1 is the Unicode code point for ±, and 0xC2 0xB1 are the bytes that represent that code point in UTF-8. In Ruby we can represent UTF-8 characters using either the Unicode code point (\u00b1) or the UTF-8 bytes (in hex: \xC2\xB1; or octal: \302\261, although I don't recommend the latter since fewer Rubyists are familiar with it).
Character encoding is a big topic, well beyond the scope of a Stack Overflow answer. For a good primer, read Joel Spolsky's "The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!)", and for more details on how character encoding works in Ruby read Yehuda Katz's "Encodings, Unabridged". Reading both will take you less than 30 minutes and will save you hundreds of hours of pain in the future.
This is a common question, but just can't seem to find the answer without resorting to unreliable regular expressions.
Basically if there is a \302\240 or similar combination in a string I want to replace it with the real character.
I am using PLruby for this, hence the warn.
obj = {"a"=>"some string with special chars"}
warn obj.inspect
NOTICE: {"Outputs"=>["a\302\240b"]} <- chars are escaped
warn "\302\240"
NOTICE: <-- there is a non breaking space here, like I want
warn "#{json.inspect}"
NOTICE: {"Outputs"=>["a\302\240"b]} <- chars are escaped
So these can be decoded when I use a string literal, but with the "#{x}" format the \xxx placeholders are never decoded into characters.
How would I assign the same string as the middle command yields?
Ruby Version: 1.8.5
You mentioned that you're using PL/ruby. That suggests that your strings are actually bytea values (the PostgreSQL version of a BLOB) using the old "escape" format. The escape format encodes non-ASCII values in octal with a leading \ so a bit of gsub and Array#pack should sort you out:
bytes = s.gsub(/\\([0-8]{3})/) { [ $1.to_i(8) ].pack('C') }
That will expand the escape values in s to raw bytes and leave them in bytes. You're still dealing with binary data though so just trying to display it on a console won't necessarily do anything useful. If you know that you're dealing with comprehensible strings then you'll have to figure out what encoding they're in and use String methods to sort out the encoding.
Perhaps you just want to use .to_s instead?
I am stripping the padding from the end of of a base64 encoded string. I have found that I can successfully decode the string without adding the padding back on first (in php at least). Is this a result of the specification of base64 or implementation dependent?
And a related question, can a = sign exist in a base64 encoded string other than as padding, i.e. If it is not implementation dependent, is it safe just to strip the trailing equals signs or is it possible that the last "real" character could have been one?
While padding isn't necessary to decode a base64 string, there are some implementations that will throw an error if the padding has been stripped away.
The RFC states:
Implementations MUST include appropriate pad characters at the end of
encoded data unless the specification referring to this document
explicitly states otherwise.
The = character will only ever be used for padding.
I am trying to come up with a regex to remove all special characters except some. For example, I have a string:
str = "subscripción gustaría♥"
I want the output to be "subscripción gustaría".
The way I tried to do is, match anything which is not an ascii character (00 - 7F) and not special character I want and replace it with blank.
str.gsub(/(=?[^\x00-\x7F])(=?^\xC3\xB3)(=?^\xC3\xA1)/,'')
This doesn't work. The last special character is not removed.
Can someone help? (This is ruby 1.8)
Update: I am trying to make the question a little more clear. The string is utf-8 encoded. And I am trying to whitelist the ascii characters plus ó and í and blacklist everything else.
Oniguruma has support for all the characters you care about without having to deal with codepoints. You can just add the unicode characters inside the character class you're whitelisting, followed by the 'u' option.
ruby-1.8.7-p248 > str = "subscripción gustaría♥"
=> "subscripci\303\263n gustar\303\255a\342\231\245"
ruby-1.8.7-p248 > puts str.gsub(/[^a-zA-Z\sáéíóúÁÉÍÓÚ]/u,'')
subscripción gustaría
=> nil
str.split('').find_all {|c| (0x00..0x7f).include? c.ord }.join('')
The question is a bit vague. There is not a word about encoding of the string. Also, you want to white-list characters or black list? Which ones?
But you get the idea, decide what you want, and then use proper ranges as colleagues here already proposed. Some examples:
if str = "subscripción gustaría♥" is utf-8
then you can blacklist all char above the range (excl. whitespaces):
str.gsub(/[^\x{0021}-\x{017E}\s]/,'')
if string is in ISO-8859-1 codepage you can try to match all quirky characters like the "heart" from the beginning of ASCII range:
str.gsub(/[\x01-\x1F]/,'')
The problem is here with regex, has nothing to do with Ruby. You probably will need to experiment more.
It is not completely clear which characters you want to keep and which you want to delete. The example string's character is some Unicode character that, in my browser, displays as a heart symbol. But it seems you are dealing with 8-bit ASCII characters (since you are using ruby 1.8 and your regular expressions point that way).
Nonetheless, you should be able to do it in one of two ways; either specify the characters you want to keep or, alternatively, specify the characters you want to delete. For example, the following specifies that all characters 0x00-0x7F and 0xC0-0xF6 should be kept (remove everything that is not in that group):
puts str.gsub(/[^\x00-\x7F\xC0-\xF6]/,'')
This next example specifies that characters 0xA1 and 0xC3 should be deleted.
puts str.gsub(/[\xA1\xC3]/,'')
I ended up doing this: str.gsub(/[^\x00-\x7FÁáÉéÍíÑñÓóÚúÜü]/,''). It doesn't work on my mac but works on linux.
I seems to be a very simple and much needed method. I need to remove all non ASCII characters from a string. e.g © etc. See the following example.
#coding: utf-8
s = " Hello this a mixed string © that I made."
puts s.encoding
puts s.encode
output:
UTF-8
Hello this a mixed str
ing © that I made.
When I feed this to Watir, it produces following error:incompatible character encodings: UTF-8 and ASCII-8BIT
So my problem is that I want to get rid of all non ASCII characters before using it. I will not know which encoding the source string "s" uses.
I have been searching and experimenting for quite some time now.
If I try to use
puts s.encode('ASCII-8BIT')
It gives the error:
: "\xC2\xA9" from UTF-8 to ASCII-8BIT (Encoding::UndefinedConversionError)
You can just literally translate what you asked into a Regexp. You wrote:
I want to get rid of all non ASCII characters
We can rephrase that a little bit:
I want to substitue all characters which don't thave the ASCII property with nothing
And that's a statement that can be directly expressed in a Regexp:
s.gsub!(/\P{ASCII}/, '')
As an alternative, you could also use String#delete!:
s.delete!("^\u{0000}-\u{007F}")
Strip out the characters using regex. This example is in C# but the regex should be the same:
How can you strip non-ASCII characters from a string? (in C#)
Translating it into ruby using gsub should not be difficult.
UTF-8 is a variable-length encoding. When a character occupies one byte, its value coincides with 7-bit ASCII. So why don't you just look for bytes with a '1' in the MSB, and then remove both them and their trailers? A byte beginning with '110' will be followed by one additional byte. A byte beginning with '1110' will be followed by two. And a byte beginning with '11110' will be followed by three, the maximum supported by UTF-8.
This is all just off the top of my head. I could be wrong.