when I'm typing the command
brew install pygobject3 --with-python#2 gtk+3
I'm always getting the error message
invalid option --with-python#2
I'm getting the same error message when I want to run the gtk+3 under mac os 10.15
Namespace Gtk not available
Maybe the Version of 10.15 of MacOS the problem....
gtk+3 version 3.24.12 and pygobject3 Version 3.34.0 are installed.
Installation of homebrew for MacOS
gtk+3 version 3.24.12 and pygobject3 Version 3.34.0 are installed.
Python3.7 is installed
File "...anaconda3/envs/python37/lib/python3.7/site-packages/gi/__init__.py", line 129, in require_version
raise ValueError('Namespace %s not available' % namespace)
ValueError: Namespace Gtk not available
I would like to run the program DemonEditor on MacOS 10.15 (Catalina)
to make some settings of my engima2 satellite receiver, for this I need the requirements "GTK+ >= 3.16 with PyGObject bindings".
Maybe some of the experts can help me.
Thanks very much
Since I am the author of this program, I am forced to report that since the program is designed for Linux, it will not work on MacOS without minor changes to the program itself. But still it’s possible.
DemonEditor
Тo resolve dependencies, it is enough to install as follows:
brew install gtk+3 pygobject3 adwaita-icon-theme
pip3 install requests
Upd.
I created an experimental brunch and added small changes to the program for the possibility of testing the launch in the MacOS. Perhaps not all the functionality will work (I have not tested it), but the program should start.
Gud luck!
STRIKE. It works, I can start the DemonEditor-GUI under 10.15. I have remove all packages via the
brew remove --force $(brew list)
installed the three packages again, via
brew install python3 gtk+3 pygobject3 adwaita-icon-theme
BUT. The most important step was to add the "Installation folder" of the brew packages to my python path but execute the comand
export PYTHONPATH=/usr/local/lib/python3.7/site-packages.
My assumption is, that due to fact, that I have installed an own conda-environment for python37, the site-packages have to be added to the path.
Big thanks for the help.
On my test system, I did not set any paths or environment variables! Just installed python 3 with the command:
brew install python3
Then I installed the dependencies as described above.Then I downloaded the archive from here, and in the unpacked folder of the program I simply gave the command:
./start.py
Below is the output of the commands python3 --version and brew list
Compare with your list, perhaps this will somehow help identify the missing components.
python3 --version
Python 3.7.4
brew list
adwaita-icon-theme libepoxy
atk libffi
cairo libpng
fontconfig librsvg
freetype libtiff
fribidi lzo
gdbm openssl#1.1
gdk-pixbuf pango
gettext pcre
glib pixman
gobject-introspection pkg-config
graphite2 py2cairo
gsettings-desktop-schemas py3cairo
gtk+3 pygobject3
harfbuzz python
hicolor-icon-theme python#2
icu4c readline
jpeg sqlite
libcroco xz
Upd. For the experiment, I removed all my packages with the command:
brew remove --force $(brew list)
Then again installed by commands as described above
brew install python3 gtk+3 pygobject3 adwaita-icon-theme
Working!
I've been trying to upgrade my OpenCV2 to OpenCV3 on my macOS Sierra 10.12.5, using homebrew and also have its bindings for both Python2 and Python3.
Following the excellent guide at pyimagesearch, I got to run
brew install opencv3 --with-contrib --with-python3 --HEAD
(I first uninstalled OpenCV, just for clarity and to avoid any potential conflicts). Now, the guide explains that --with-contrib is downloading additional stuff, which is good to have; --with-python3 is downloading the bindings for Python3 (those for Python2 are automatically there); --HEAD is pulling the Github branch version rather than the tagged release, which is a workaround to a problem related to the QKIT Apple library.
My problem is I get a
Error: Directory not empty - (/usr/local/Cellar/numpy/1.13.1, /usr/local/Cellar/numpy/1.13.1.tmp)
A brew doctor tells me Numpy is not linked but I'm not exactly sure what'd be the best way to proceed here. Wouldn't want to break something.
At this point, I just tested installing just the bindings for Python2, as in
brew install opencv3 --with-contrib --HEAD
and this leads me to this other problem:
Error: No such file or directory - /private/tmp/opencv3-20170714-55298-snr5jb/3rdparty/ippicv/downloader.cmake,
which is solved with if I instead run
brew install opencv3 --with-contrib
This last one works, I got OpenCV3 for Python2. Apparently I don't have the HEAD issue.
Now though, I still want the bindings for Python3 as well and due to the Numpy error above I'm not sure how to proceed? It seems like it's trying to install Numpy as a dependency, which I have already.
brew install opencv3 --with-contrib --with-python3 --HEAD
Instead of :
brew install opencv3 --with-contrib --with-python3 --without-numpy
and See this :
http://www.pyimagesearch.com/2017/05/15/resolving-macos-opencv-homebrew-install-errors/
I upgraded to imagemagick-7.0.4-3.sierra and now my previously installed RMagck 2.16 fails. I checked for MagicWand:
$ find /usr/local -name MagickWand.h
/usr/local/Cellar/imagemagick/7.0.4-3/include/ImageMagick-7/MagickWand/MagickWand.h
So it seems to be there. Also I reinstalled and relinked pgk-config. Didn't help as well. Any ideas?
I have just encountered and solved this issue on a new Mac running Sierra. There seems to be no solution for ImageMagick 7 at this time.
Uninstall existing imagemagick if needed
Install version 6:
brew install imagemagick#6
Since this is keg-only, you should then force-link it:
brew link --force imagemagick#6
This installed imagemagick version 6.9.7-4 for me.
Afterwards, the gem then installed successfully. I am including the version numbers for future readers:
Installing rmagick 2.13.4 with native extensions
dyson's solution didn't quite work for me. I found that in addition to installing imagemagick#6, I also need to install pkg-config and then set PKG_CONFIG_PATH.
brew install imagemagick#6 pkg-config
PATH="/usr/local/opt/imagemagick#6/bin:$PATH" PKG_CONFIG_PATH=/usr/local/opt/imagemagick#6/lib/pkgconfig gem install rmagick -v '2.13.4'
Environment OSX 10.9.5
I am trying to install swftools so that I can use pdf2swf. I am installing through HomeBrew. I've seen various notes about pdf2swf failing to install if its dependencies have not been previously installed. So using the command at the link I use:
$ brew install freetype libjpeg giflib swftools
And it completes without error – except pdf2swf is not installed. When I look in usr/local/bin, I see the other swftools are installed successfully.
Does anyone know what might be wrong?
Update: For completeness if anyone comes across this question looking to use pdf2swf in an AIR desktop app: you can't. Apparently pdf2swf compiles the swf with certain "AllowDomain" security settings and there is no option to not do that. Short of editing the source code and compiling pdf2swf oneself, it seems a deadend.
If you look at the brew formula: brew edit swftools, PDF support comes via xpdf and this is not included by default as XQuartz needs to be installed:
brew instal swftools --with-xpdf
swftools: XQuartz is required to install this formula.
You can install with Homebrew Cask:
brew install Caskroom/cask/xquartz
You can download from:
https://xquartz.macosforge.org
Error: An unsatisfied requirement failed this build.
So:
Install XQuartz
brew install swftools --with-xpdf
[edit] I was troubleshooting problems with my development environment when I noticed one of my problems was the dependency on ImageMagick, since it's a vital part of my app.
After upgrading to OS X Lion (10.7) i no longer had ImageMagick available, i then tried installing again using MacPorts without success, i then installed from source, and the install wasn't very successfully i had convert and identify but it output error messages that i unfortunately dont have anymore, i by some strange reason decided to remove all of my MacPort libraries and started using Homebrew, i tried installing ImageMagick, it installs OK but when i try to use it throws this error
dyld: Library not loaded: /opt/local/lib/libltdl.7.dylib
Referenced from: /usr/local/bin/convert
Reason: Incompatible library version: convert requires version 11.0.0 or later, but libltdl.7.dylib provides version 10.0.0
Trace/BPT trap: 5
I read online but i have no clue on whats going on here, i found that libltdl is called libtool, and that i obviously need to upgrade it to a newer version, but i havent found any indication of how or where to find the source, or if this should be already be handled by homebrew and why it hasn't.
I tried installing ImageMagick again from source using this installer script https://github.com/masterkain/ImageMagick-sl but when i try to use convert it throws a similar error.
$ convert gnome.jpg -resize 50% gnome_.jpg
dyld: Library not loaded: /opt/local/lib/libltdl.7.dylib
Referenced from: /usr/local/bin/convert
Reason: Incompatible library version: convert requires version 11.0.0 or later, but libltdl.7.dylib provides version 10.0.0
Trace/BPT trap: 5
$ which convert
/usr/local/bin/convert
What can i do to solve my problem?
On 10.8 I solved this issue with:
brew install libtool --universal
brew link libtool
If you don't know what brew is, visit https://github.com/mxcl/homebrew and its wiki.
brew uninstall imagemagick
brew install imagemagick --build-from-source
worked for me
I too use homebrew for installing packages but imagemagick stopped working after upgrading OSX 10.8 to 10.9 (Mavericks). I had to do the following steps:
brew uninstall imagemagick
brew uninstall libtool
brew install libtool --universal
brew install imagemagick --build-from-source
Why the --build-from-source? Well for me running brew install imagemagick on its own to install the pre-built binary wasn't sufficient; it fixed the original 'dyln' error but was replaced with:
unable to load module `/usr/local/Cellar/imagemagick/6.8.7-7/lib/ImageMagick//modules-Q16/coders/png.la': file not found # error/module.c/OpenModule/1277
I also upgraded to Lion and lost ImageMagick, although i'm getting different errors.
i found a Lion distribution on imagemagick.org. not a big fan of the DYLD_LIBRARY_PATH environment variable but it works.
ok scratch that. i just downloaded the ImageMagick source and re-compiled:
cd /tmp
curl -OL ftp://ftp.imagemagick.org/pub/ImageMagick/ImageMagick.tar.gz
tar -xzf ImageMagick.tar.gz
cd ImageMagick-6.7.2-7/
./configure --prefix=/usr/local --disable-static --with-modules --without-perl --without-magick-plus-plus --with-quantum-depth=8 --disable-openmp --with-gs-font-dir=/usr/local/share/ghostscript/fonts
make
sudo make install
On Mountain Lion OSX,
Even with the updated brew for imagemagick(which includes libtool), this error seemed to happen to me.
so i fixed it using the following commands
brew uninstall libtool
brew install libtool --universal
brew link libtool --force
For others looking and still having trouble, I used this:
https://github.com/maddox/magick-installer
On 10.8, with brew, I solved this issue with:
brew install graphicsmagick
For the googlers: If you happened to have it installed with brew beforehand, you'll need to reinstall by running brew uninstall graphicsmagick before installing again. Easy.
This helped me after restoring OS X 10.9.3 from time machine.
brew uninstall imagemagick
brew uninstall libtool
brew install libtool --universal
brew unlink libtool && brew link libtool
brew install imagemagick
brew install Homebrew/python/pillow
brew link --overwrite pillow
The same problem might occur with OSX Mountain Lion (preview 4). I had to configure some parts separately because there are some library incompatibilities:
dyld: Library not loaded: /usr/local/lib/libjpeg.8.dylib
Referenced from: /usr/local/bin/convert
Reason: Incompatible library version: convert requires version 13.0.0 or later, but libjpeg.8.dylib provides version 9.0.0
I had to add --with-fontconfig=no, --with-lzma=no and use /opt/local/share/... instead of /usr/local/share/... for the ghostscript fonts:
cd /tmp
curl -OL ftp://ftp.imagemagick.org/pub/ImageMagick/ImageMagick.tar.gz
tar -xzf ImageMagick.tar.gz
cd ImageMagick-6.7.8-0/
./configure --prefix=/usr/local --disable-static --with-modules --without-perl --without-magick-plus-plus --with-quantum-depth=8 --disable-openmp --with-fontconfig=no --with-gs-font-dir=/opt/local/share/ghostscript/fonts --with-lzma=no
make
sudo make install
I could fix the ImageMagick problem by installing corresponding package from cactuslab site.
Then by setting the PATH variables in terminal:
export MAGICK_HOME="/usr/local/ImageMagick/"
export PATH="$MAGICK_HOME/bin:$PATH"
export DYLD_LIBRARY_PATH="$MAGICK_HOME/lib/"
If you're using Homebrew, try the following command:
brew doctor
to diagnose the common problems.
One of it could be to remove DYLD_FALLBACK_LIBRARY_PATH variable from your ~/.profile if you have it.
Or you have to re-install libtool by:
brew reinstall libtool --universal && brew unlink libtool && brew link libtool
I tried most of the solutions above and they didn't work. Here's how I fixed my problem:
brew install imagemagick;
brew install freetype;
cd /usr/X11/lib/;
sudo mv libfreetype.6.dylib libfreetype.6.dylib.orig;
sudo ln -s /usr/local/opt/freetype/lib/libfreetype.6.dylib libfreetype.6.dylib
Tested on OS X 10.7.2
For 10.7.8 and up, you have to install the php version and not the pecl version. Depending on your version of php you've install with Macports you can either do:
sudo port install php-imagick
sudo port install php5-imagick
sudo port install php53-imagick
sudo port install php54-imagick
Remember only to do the one of your current version of php.