I've installed VSCode with Bash debug extension.
Before that, I've installed bashdb and I've verified its version using (bashdb --version) and it's 4.4.
Now, the extension creates an empty file called launch.json.
I wrote the following to start debugging, but still, nothing happened
{
"version": "0.2.0",
"scriptPath": "${command:SelectScriptName}",
"configurations": [
],
"compounds": [
{
"type": "bashdb",
"name": "Compound",
"configurations": []
}
]
}
What should I do to enable debugging?
Regards,
With the bashdb extension installed, add the following block to the launch.json file. This configuration allows you to debug the script you have currently open on VS Code. So, in order to start debugging a script you must have it open on VS Code, and type F5 to start debugging it. Alternatively, and also with the same script open on VS Code, you can open the Run and Debug menu, on the VS Code left bar, and click Play.
{
"type": "bashdb",
"request": "launch",
"name": "Bash-Debug (simplest configuration)",
"cwd": "${workspaceFolder}",
"program": "${file}",
"showDebugOutput": true,
"terminalKind": "integrated"
}
Adding the args parameter to the above block, allows you to pass an array with arguments to the script while debugging.
I tested this code with the Bash Debug extension:
{
"version": "0.2.0",
"configurations":
[
{
"type": "bashdb",
"request": "launch",
"name": "Bash-Debug (select script from list of sh files)",
"cwd": "${workspaceFolder}",
"program": "${command:SelectScriptName}",
"args": []
}
]
}
Visual Studio Code displays a list of script from your project, and you can pick the one you want to run. You can alternatively choose a "Bash-Debug (hardcoded script name)" configuration, which allow to hardcode the script path.
If you want to debug a Bash script I recommend you execute your script with -x flag. For example:
bash -x script.sh
or into the script add:
set -x
<DEBUG_CODE_LINES>
set +x
Related
I am trying to debug a Rust program in VS Code, but I get an error:
After clicking OK, VS Code opens "settings.json":
I have these extensions installed:
My program is a simple "hello world" app.
Unfortunately VS Code can't debug Rust out of the box :( But no need to worry, just few steps of configuration will do the work :)
Steps
Install C/C++ extension if you are on windows and CodeLLDB if on OS X/Linux
Click Debug -> Add Configuration, a launch.json file should open, you need to change the program name here manually
{
"version": "0.2.0",
"configurations": [
{
"name": "(Windows) Launch",
"type": "cppvsdbg",
"request": "launch",
"program": "${workspaceRoot}/target/debug/foo.exe",
"args": [],
"stopAtEntry": false,
"cwd": "${workspaceRoot}",
"environment": [],
"externalConsole": true
},
{
"name": "(OSX) Launch",
"type": "lldb",
"request": "launch",
"program": "${workspaceRoot}/target/debug/foo",
"args": [],
"cwd": "${workspaceRoot}",
}
]
}
Make sure Allow setting breakpoints in any file is checkend under File -> Preferences -> Settings
For detailed steps and more you can refer the article I used to answer this
Credits- Forrest Smith
From your screenshots, you're on Windows, so here's how to proceed. This assumes you already took care of the basics:
VsCode has the recommended rust-analyzer extension installed.
Your project folder was initialized with cargo init. (Your project's folder name must be the same as the name of your package in Cargo.toml.)
You can cargo run from within your project directory and it works.
As indicated by various locations on the 'Net, you need to install another VsCode extension to make it so you can debug. Since you're on Windows, you want to use the MS C++ DevTools extension for VsCode, instead of the CodeLLDB one.
Next, you need a "launch" configuration setup. Select VsCode's Run >>> Add Configuration... menu item. Choose the C/C++: (Windows) launch option in the drop-down. You'll now have a launch.json file with a single configuration object.
You'll need to change the program property to "${workspaceFolder}/target/debug/${workspaceFolderBasename}.exe"; this depends on your package name being the same as the project folder's name. (I also changed the cwd property to "${workspaceFolder}", though I'm not sure it matters.) To be clearer, here's the configuration I have presently in my launch.json file (the preLaunchTask property is for later):
{
"name": "(Windows) Launch",
"type": "cppvsdbg",
"request": "launch",
"program": "${workspaceFolder}/target/debug/${workspaceFolderBasename}.exe",
"preLaunchTask": "rust: cargo build",
"args": [],
"stopAtEntry": false,
"cwd": "${workspaceFolder}",
"environment": [],
"console": "externalTerminal"
}
At this point, as long as you've already built your project at least once, you can hit F5 and debug.
If you want F5 to also save your changes and rebuild your project before debugging, then you also have to add a build task and configure it to run before debugging starts.
To do that, add the build task by opening the Show All Commands box (either F1 or Ctrl+Shift+p) and choosing Tasks: Configure Task. Select rust: cargo build. It'll create a tasks.json file next to your launch.json; the defaults are all you need. My file looks like this:
{
"version": "2.0.0",
"tasks": [
{
"type": "cargo",
"command": "build",
"problemMatcher": [
"$rustc"
],
"group": "build",
"label": "rust: cargo build"
}
]
}
Then, to hook everything up, you just need to manually add the preLaunchTask property to your launch configuration with a value equal to the label in your task. E.g. "preLaunchTask": "rust: cargo build",, like what I have in my example launch.json up above.
At this point, whenever you press F5, VsCode will save your work, rebuild your project, then start debugging it.
Visual Studio Code is a general editor, but it can be configured to debug rust code.
Step 1.
Assuming that Visual Code, rust and cargo are installed, the first step is to enable the required extensions:
rust-analyzer
CodeLLDB
These only need to be installed one.
Step 2
The second step is to create the rust code. I have a folder called Rust, in which I keep the rust code. Changing to that folder, I use cargo new hello_world to create a new rust project.
Step 3
The third step is to change the folder for the project. There are two plausible options, but only one of them will work.
I changed to my Rust folder, and then I can edit the source code by following ``hello_world - src`.
To debug the code, it is necessary to create a launch.json file, using Run - Add configuration... However, the file isn't correct, with <your program> where the correct name should be. This is the wrong approach.
{
// Use IntelliSense to learn about possible attributes.
// Hover to view descriptions of existing attributes.
// For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
"version": "0.2.0",
"configurations": [
{
"type": "lldb",
"request": "launch",
"name": "Debug",
"program": "${workspaceFolder}/<your program>",
"args": [],
"cwd": "${workspaceFolder}"
}
]
}
The documentation is a bid thin at this point. The correct approach is to pick a different folder, the top level of the project hello_world. The Cargo.toml file is available.
Now, when Run - Add configuration... is used, and the option of LLDB is selected -
the Cargo.toml file can be picked up -
and then the Cargo.toml file is used to correctly build the launch.json file -
{
// Use IntelliSense to learn about possible attributes.
// Hover to view descriptions of existing attributes.
// For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
"version": "0.2.0",
"configurations": [
{
"type": "lldb",
"request": "launch",
"name": "Debug executable 'hello_world'",
"cargo": {
"args": [
"build",
"--bin=hello_world",
"--package=hello_world"
],
"filter": {
"name": "hello_world",
"kind": "bin"
}
},
"args": [],
"cwd": "${workspaceFolder}"
},
{
"type": "lldb",
"request": "launch",
"name": "Debug unit tests in executable 'hello_world'",
"cargo": {
"args": [
"test",
"--no-run",
"--bin=hello_world",
"--package=hello_world"
],
"filter": {
"name": "hello_world",
"kind": "bin"
}
},
"args": [],
"cwd": "${workspaceFolder}"
}
]
}
Now, both Run - Start debugging and Run - Run without Debugging both work properly.
I recently have been using GDB to debug a C++ program. For standard usage, I usually do:
$ cd compiledir
$ compilescript
$ gdb compiled.out
$ run inputfile
compilescript is a program that compiles the code for the particular software I am working on, and only works in compiledir. It reads an external file for compiler flags. For gdb, I include the neccisary -g flag. This works for me to debug via the text interface. However, this text interface is becoming increasingly frustrating to use compared to a IDE, and I know that Visual Studio uses gdb as a backend to debug C++ files by default.
To get started, I let visual studio generate default C++ debugging configurations and tried to change the commands, but I have no idea what it's doing, and there doesn't appear to be much documentation on making custom build/debug configurations, particularly for for the linux version of VScode.
Currently I have:
launch.json (default)
{
// Use IntelliSense to learn about possible attributes.
// Hover to view descriptions of existing attributes.
// For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
"version": "0.2.0",
"configurations": [
{
"name": "g++ - Build and debug active file",
"type": "cppdbg",
"request": "launch",
"program": "${fileDirname}/${fileBasenameNoExtension}",
"args": [],
"stopAtEntry": false,
"cwd": "${fileDirname}",
"environment": [],
"externalConsole": false,
"MIMode": "gdb",
"setupCommands": [
{
"description": "Enable pretty-printing for gdb",
"text": "-enable-pretty-printing",
"ignoreFailures": true
}
],
"preLaunchTask": "C/C++: g++ build active file",
"miDebuggerPath": "/usr/bin/gdb"
}
]
}
tasks.json
{
"tasks": [
{
"type": "cppbuild",
"label": "Custom Build",
"command": "compilescript" ,
"options": {
"cwd": "compiledir"
},
"problemMatcher": [
"$gcc"
],
"group": {
"kind": "build",
"isDefault": true
},
"detail": "compile using the custom build script."
}
],
"version": "2.0.0"
}
Running this task, and running it indirectly through the launch.json file both fail. I get the following:
> Executing task: Custom Build<
Starting build...
and it hangs there. I tried to put echo into the build command to see if it was even running, or have it create a file. However, it's like nothing is being run at all and I can't see any printing or files being created anywhere.
What is the proper way to create a custom GDB build/debug task for Visual Studio (Linux Edition)?
Update
I've edited both tasks.json and launch.json, and am able to compile successfully and run GDB with the inputfile I want. However, the environment variables are not configuring properly. I need environment variables to be configured to properly run the inputfile. I currently have:
launch.json
{
"version": "0.2.0",
"configurations": [
{
"name": "g++ - Build and debug active file",
"type": "cppdbg",
"request": "launch",
"program": compiled.out,
"args": [],
"stopAtEntry": false,
"cwd": "${fileDirname}",
"environment": [{"VAR1": "VAR1_VALUE", "VAR2": "VAR2_VALUE"}],
"externalConsole": false,
"MIMode": "gdb",
"setupCommands": [
{
"description": "Enable pretty-printing for gdb",
"text": "-enable-pretty-printing",
"ignoreFailures": true
}
],
"preLaunchTask": "C/C++: g++ build active file",
"miDebuggerPath": "/usr/bin/gdb"
}
]
}
However, when I run the build/debug task, it builds, but doesn't debug, and GDB complains of an error. It appears the "environment" variable is setting something, but I get the following error:
Unable to start debugging. Unexpected GDB output from command "-interpreter-exec console "set env"". Argument required (environment variable and value).
This is how you can set up debugging in C++ without using any Task extensions. Only the launch.json file will be needed.
First, compile your program with the debug flag: -g, and keep it anywhere in your folder.
For example in your active folder (or workspace folder which you have currently opened), Let's say only your source code is present
Program.cpp
# Other files...
Compile your program using the -g flag and create an executable as shown:
gcc -g Program.cpp -o a.out
If your compilation is successful, the executable a.out will be created in the folder, and your root folder will look like
a.out
Program.cpp
# Other files...
Next, you need to create your launch.json file. Since you are not using any Tasks extensions, you can choose the default configuration which will create the said file with most properties filled with their default values.
Now edit the program path in the launch.json to the path of this executable. I've also seen that there's a bug for some Linux OSes for VS Code's C++ debugger that does not work with the internal console. So you might also need to set the "external console" option as true
in this case, you'll make two edits in your launch.json file as
"configurations": [
{
#.... Other stuff
"program": "${fileDirname}/a.out",
#.... Other stuff
"externalConsole": true,
#.... Other stuff
}
]
}
That's all you need. Set breakpoints in your program, and start debugging using the button in the Debug Panel. An external console window will pop up running your program, and the breakpoints should be working.
Also if you're new to debugging in general, remember that every time you change your source code (Program.cpp in this case), you will need to compile and build your debuggable executable again. If you do not do so, your debugging would be glitchy.
Edit:
I see you want to add environment variables. I have a hunch on what you're doing wrong.
It seems to me that you want to set two variables such that
VAR1 = VAR1_VALUE
VAR2 = VAR2_VALUE
Your syntax for this in your launch.json file is incorrect. It should be as shown:
#... Other stuff
"cwd": "${fileDirname}",
"environment":
[
{
"name": "VAR1", "value": "VAR1_VALUE"
},
{
"name": "VAR2", "value": "VAR2_VALUE"
}
],
"externalConsole": false,
#... Other stuff
I generated the files necessary for creating a color theme in VS Code. I did this with the generator-code node package.
My file structure is as follows
When I run VS Code's debugger, I get this warning that prevents the debugger from running.
Here are the contents of my launch.json file for reference:
{
"version": "0.2.0",
"configurations": [
{
"name": "Extension",
"type": "extensionHost",
"request": "launch",
"runtimeExecutable": "${execPath}",
"args": [
"--extensionDevelopmentPath=${workspaceFolder}"
],
"outFiles": [
"${workspaceFolder}/out/**/*.js"
],
}
]
}
In case you're wondering what I'm expecting to happen when I run the debugger, here's the moment in the tutorial I was following where I ran into this problem.
Edit: Well, I evaded the problem somehow by deleting the files and starting over. I'm not sure what was causing the problem before.
This popup only appears for me when trying to launch the debugger while having the launch.json or tasks.json file open. Switching to one of my test files and launching the debugger fixes it
I had this error when my launch.json was not according to the version + configurations scheme, I copy pasted the content of configurations to the file instead of putting it in the array.
{
"name": "Extension",
"type": "extensionHost",
"request": "launch",
"runtimeExecutable": "${execPath}",
"args": [
"--extensionDevelopmentPath=${workspaceFolder}"
],
"outFiles": [
"${workspaceFolder}/out/**/*.js"
],
}
I have a launch.json like below:
"version": "0.2.0",
"configurations": [
{
"name": "Launch",
"type": "go",
"request": "launch",
"mode": "auto",
"program": "${fileDirname}",
"env": {},
"args": ["server"]
}
]
}
When I launch it using the debug view on VScode it works fine but I need to change the program attribute to relative path of the respective file from my workspace location, strange behaviour is observed, other components in the same package start throwing undefined func error. Probably something goes wrong with current working dir or go module setup.
In order to investigate further, I need to know the command that is generated from this launch.json file. It should be something like go run ...
I have checked the output and debug console, both of them shows nothing about the launch command.
If you know how to see launch command, please help.
You can find the generated command in Visual Studio Code's debug output. When you have started a debug session, open the Debug Console by clicking on the Debug Console icon in the View Bar or by pressing Ctrl + Shift + Y. The debug output will include the generated command line.
I have an existing C++ project that I've configured and built in Visual Studio. This project's only target is Windows, no other platforms. I'm using Bash in WSL to launch the executable.
I prefer to develop in Visual Code (not Visual Studio). I prefer to build and launch applications through Bash (strong Linux background).
Right now, my development workflow is:
Edit code in VS Code
Switch to Visual studio and click the build button
Switch to Bash and execute the built program
Since I only keep Visual Studio open for building, I would much prefer to build by command line through Bash.
My naive approach was to use an open source tool to convert the Visual Studio project file into a CMake file. Then cmake & make from Bash, but I stopped when I started encountering errors looking for windows.h (maybe I just need to add some windows include paths to my include_path).
I'm not sure what the best way to go about this would be. Any suggestions would be appreciated!
If the project is entirely C++, there should be no reason to leave WSL. Building and launching the application can be easily handled right there!
You can absolutely build by the command line in bash by using
g++ -o <outputfile> <inputfiles>
However, the easiest way to run the program is to create a build configuration in Visual Code. You will need 2 files: launch.json and tasks.json
To create the launch file, hit F1 (or open your command pallet) and select Tasks: Configure Default Build Task. It should look something like this.
{
"version": "2.0.0",
"tasks": [
{
"type": "shell",
"label": "g++ build active file",
"command": "/usr/bin/g++",
"args": [
"-g",
"${file}", //input files
"-o",
"${fileDirname}/a.out" //output file
],
"options": {
"cwd": "/usr/bin"
},
"problemMatcher": [
"$gcc"
],
"group": {
"kind": "build",
"isDefault": true
}
}
]
}
To create launch.json, go to the 'debug' tab and select 'create a launch.json file'. It should look something like this
{
// Use IntelliSense to learn about possible attributes.
// Hover to view descriptions of existing attributes.
// For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
"version": "0.2.0",
"configurations": [
{
"name": "g++ build and debug active file",
"type": "cppdbg",
"request": "launch",
"program": "${fileDirname}/a.out", //output file
"args": [],
"stopAtEntry": false,
"cwd": "${workspaceFolder}",
"environment": [],
"externalConsole": false,
"MIMode": "gdb",
"setupCommands": [
{
"description": "Enable pretty-printing for gdb",
"text": "-enable-pretty-printing",
"ignoreFailures": true
}
],
"preLaunchTask": "g++ build active file",
"miDebuggerPath": "/usr/bin/gdb"
}
]
}
with both of these files in place, all you have to do is hit the run button like in Visual Studio.
MSBuild.exe is provided with my installation of Microsoft Visual Studio. From within WSL bash, I can invoke MSBuild.exe and give the .sln file of my project as the first and only argument.
The compilation output is written to the terminal.