I want to update field data_aktualizacji when some row in the same table is updated. I created the following compound trigger.
CREATE OR REPLACE TRIGGER oferta_update_trigger
FOR UPDATE ON oferty
compound TRIGGER
id_oferty number(10);
AFTER EACH ROW IS
BEGIN
id_oferty := :new.idk;
END AFTER EACH ROW;
AFTER STATEMENT IS
BEGIN
UPDATE oferty SET data_aktualizacji = SYSDATE WHERE idk = id_oferty;
END AFTER STATEMENT;
END;
/
When I want to update some record, I get the following error.
SQL Error: ORA-00036: maximum number of recursive SQL levels (50) exceeded.
How to solve this problem? I this that some loop is created, but I don't know, how to workaround this.
Update oracle to alter the column to default to sysdate
Alter table oferty alter column data_aktualizacji set default sysdate
No need for trigger at all
As Ctznkane525 wrote, you definitively should use default-value to perform this action.
If you don't want to use default you can modify new.data_aktualizacji:
CREATE OR REPLACE TRIGGER oferty_update_aktualizacji
BEFORE INSERT OR UPDATE
ON oferty
FOR EACH ROW
DECLARE
BEGIN
:new.data_aktualizacji:= sysdate;
END;
Related
I have a litte task. Firstly I added a column in my table with specific constraints. Then I added a trigger for other jobs.
But I need a rollbacksql and have no idea what to proceed. Can anybody help or give an advice about it? I am adding my sql snippet.
ALTER TABLE FCBSADM.GL_DEF ADD GL_TP NUMBER;
ALTER TABLE FCBSADM.GL_DEF ADD CONSTRAINTS CH_COL CHECK (GL_TP between 1 and 10);
CREATE OR REPLACE TRIGGER GL_DEF_GL_TP_TRG
BEFORE INSERT OR
DELETE OR
UPDATE OF CDATE, CMPNY_DEF_ID, CUSER, DESCR, GL_DEF_ID, MNY_TP_ID, ST, UDATE, UUSER, GL_TP
ON FCBSADM.GL_DEF
FOR EACH ROW
DECLARE
cnt number := 0;
BEGIN
IF INSERTING
THEN
IF :NEW.GL_TP = 2
THEN
SELECT 1 into cnt from dual where exists( select *
FROM LOOKUP_GLCODE_IND_CEZA lookup
WHERE lookup.indirim_glcode = :NEW.gl_Def_id);
IF (cnt = 1) THEN
raise_application_error
(-20101, 'Please insert record into LOOKUP_GLCODE_IND_CEZA before inserting GL_DEF');
END IF;
END IF;
END IF;
END;
What do you want to rollback? Adding a column and creating a trigger? If so, drop them, both.
alter table gl_def drop column gl_tp;
drop trigger gl_def_gl_tp_trg;
A trigger and newly added table can be rolled back only by using drop and alter statements. This is ok if its being done inside a script that executes only a few times. But is highly inefficient if both drop and alter are called frequently for n number of records.
The question I am going to ask is already there. But I don't have answer for this.
Please refer the below link.
ORACLE TRIGGER INSERT INTO ... (SELECT * ...)
I have around 600 columns in a table. After each insert in this table I need to insert the new row in another backup table.
Please tell how to use "INSERT INTO TABLE_NAME2 SELECT * FROM TABLE_NAME1" query in trigger.
Note: Without specifying columns in insert or select clause
Structure of both table is same. Specifying all the column name in trigger is difficult and also if new columns added, we need to add in trigger as well.
SQL> CREATE or REPLACE TRIGGER emp_after_insert AFTER INSERT ON emp
FOR EACH ROW
DECLARE
BEGIN
insert into emp_backup values (:new.empid, :new.fname, :new.lname);
DBMS_OUTPUT.PUT_LINE('Record successfully inserted into emp_backup table');
END;
reference:
http://www.tech-recipes.com/rx/19839/oracle-using-the-after-insert-and-after-update-triggers/
You should use COMPOUND TRIGGER. This trigger should look like this:
CREATE OR REPLACE TRIGGER t_copy_table1
FOR INSERT ON table1
COMPOUND TRIGGER
v_id number;
BEFORE EACH ROW IS
BEGIN
v_id := :new.id;
END BEFORE EACH ROW;
AFTER STATEMENT IS
BEGIN
insert into table2 select * from table1 where id=v_id;
END AFTER STATEMENT;
END t_copy_table1;
I have problem when trying to excute a sequence with a before insert trigger.
CREATE TABLE personne (ID number, nom varchar2(250 char));
CREATE SEQUENCE s_inc_pers START WITH 1 INCREMENT BY 1;
CREATE TRIGGER tr_inc_pers ON t1 BEFORE INSERT
FOR EACH ROW
DECLARE
BEGIN
select s_inc_pers into :new.t1.ID from DUAL;
END.
Oracle reports a bad bind variable if you try to reference something with :NEW that is not a column in the target table. In this case it may be prompting you for a bind value as the statement is malformed.
The NEW pseudorecord refers to the row in the triggering table that is being affected by the statement. You don't need to (and mustn't) include the table name when you use the pseudorecord field, so :new.t1.ID should just be :new.ID.
To get the next value from the sequence you need to use nextval, you can't only provide the sequence name.
Your clauses are also in the wrong order, you need the DML event (insert) befroe the target table.
CREATE TRIGGER tr_inc_pers BEFORE INSERT ON t1
FOR EACH ROW
BEGIN
select s_inc_pers.nextval into :new.ID from DUAL;
END;
As you are using 11g you don't even need to select from dual, you can just assign the column value:
CREATE TRIGGER tr_inc_pers BEFORE INSERT ON t1
FOR EACH ROW
BEGIN
:new.ID := s_inc_pers.nextval;
END;
I am having an issue when creating the auto increment trigger in Oracle 11g. If someone can point out what I am doing wrong, I would really appreciate it. My script for the sequence is this :
CREATE SEQUENCE SPSS_QUOTE_LINE_ITEMS_SEQ start with 1
increment by 1
minvalue 1;
The script for trigger:
CREATE OR REPLACE TRIGGER SPSSQUOTELINEITEMS_ON_INSERT
BEFORE INSERT ON SPSS_QUOTE_LINE_ITEMS
FOR EACH ROW
BEGIN
SELECT SPSS_QUOTE_LINE_ITEMS_SEQ.NEXTVAL
INTO :new.line_num
FROM dual;
END;
The error I am getting:
[Code: 900, SQL State: 42000] ORA-00900: invalid SQL statement
Thanks a lot.
The correct way of doing this to modify your trigger as below:
CREATE OR REPLACE TRIGGER SPSSQUOTELINEITEMS_ON_INSERT
BEFORE INSERT ON SPSS_QUOTE_LINE_ITEMS
FOR EACH ROW
BEGIN
:new.line_num := SPSS_QUOTE_LINE_ITEMS_SEQ.NEXTVAL;
--No need to write any Select Into statement here.
END;
Or if i follow your way then it goes like
CREATE OR REPLACE TRIGGER SPSSQUOTELINEITEMS_ON_INSERT
BEFORE INSERT ON SPSS_QUOTE_LINE_ITEMS
FOR EACH ROW
declare
var number;
BEGIN
SELECT SPSS_QUOTE_LINE_ITEMS_SEQ.NEXTVAL
INTO var
FROM dual;
:new.line_num :=var;
END;
You normally use the terms in a trigger using :old to reference the old value of the column and :new to reference the new value.
Am very new to Oracle triggers. Suppose I have a trigger on an insert in the table emp. Is there a way to find out what was the inserted record that fired the trigger. I wanted the trigger to have code that does something if the inserted record was a particular value.
Assuming you have a row-level trigger, you can simply use the :NEW pseudo-record
CREATE TRIGGER name_of_trigger
BEFORE INSERT ON emp
FOR EACH ROW
DECLARE
<<declare variables>>
BEGIN
IF( :new.ename = 'JUSTIN' )
THEN
<<do something if the newly inserted ENAME value is 'JUSTIN'>>
END IF;
END;
For a DDL trigger, the approach is completely different. In that case, the pseudofunctions ora_dict_obj_owner and ora_dict_obj_name will return the owner and name of the table that the DDL statement is operating on.
The row that is being insertes is available as NEW in the trigger
Check out the manual for more details.
http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/create_trigger.htm#BABEBAAB
http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/triggers.htm#LNPLS99955