I faced the following issue with my PL/SQL Developer. When my PC is rebooted all my preferences are reset to defaults. I guess something happens with my registry maybe (because PC is in my work office). I think there are some settings that turn off registry cleaning when PC is rebooted.
Any help or information would be appreciated.
OS: Windows 7 x64
PL/SQL Developer version: 11
Found out that Developer directory was read-only. Turned it off and everything went OK.
UPD: Found out, that settings were purged after each PL/SQL Developer closing. To fix it go to %DEVELOPER_INSTALLATION_DIR%\params.ini and check the following variables set to existing folders: prefpath and defaultprefpath. Note that they mustn't be commented.
Related
I used to use RWEverything to debug pcie and acpi related issue, to read/write registers etc.
After updating windows build (Windows11 22H2 10.0.22621.755) RWEverything stopped working, and every time I try to started error msg. it now doesn't work at all!
enter image description here
Any help is appreciated, Thanks.
Note: tried reinstalling the app, tried many version of the app. Even tried the portable version of the app no luck.
How to make RWEverything / HW work with latest Windows 11.
One more query (not sure if a separate question thread should be raised)
I tried to disable core isolation by
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios]
"HypervisorEnforcedCodeIntegrity"=dword:0000000
but unluckily, it does not work with registry change, whenever reboot system, and go to core isolation setting (memory integrity) and found it is still enabled.
one day, tried to manually disable it from setting and reboot system. it finally work.
after that, registry control also start working, with 0 to disable and with 1 to enable.
but my question is why previously my setup doe not work?
I really need a way to disable it by registry or other way instead of user manual change from GUI. any suggestions.
OS is:
Win 11 enterprise.
Build 22621.ni_release.220506
To run RW Everything 1.7 on Windows 11 you need to:
Disable "Memory Integrity" feature.
Set to zero this key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CI\Config\VulnerableDriverBlocklistEnable
I've been a happy user of MobaXterm for years, this is a great terminal and X-window manager on Windows to access Linux machine and others. Recently, possibly since I upgraded to Windows 11 or changed laptop, I sometimes get the following error window:
An error occurred while starting the following MobaXterm subprocess:
"%APPDATA%\MobaXterm\slash\bin\MobaSCPRinew.exe"
Access is denied
I could not figure out which action is triggering this error but it is pretty rare and seems to happen either when I switch from one tab to another or when I unlock my computer after a while but I can't reproduce it systematically. I'm using MobaXterm Personal Edition v22.0 Build 4858.
This executable exists on my system and the file properties mention that this is a "Command-line SCP/SFTP client". However, even after the error, the SSH Browser available in the side bar (provided you only show one tab) is still visible and working.
Does anybody know what could be causing this?
Thanks
[EDIT]
I contacted the support of MobaXterm:
they told me it is a known bug related to the "Remote Monitoring" feature, which can display stats about memory, disk usage, connected users,...
advised me to test the preview version 22.2 since the bug seems fixed in that release
I used it for a few days and the issue never happened. I will download the latest official release 22.1 and, if it happens also in that one, will wait for the official 22.2. I will close this issue once the bug is fixed in an official release.
Same issue here, with some slight differences:
Location seems to be the "Documents" folder of my "Onedrive":
E:\OneDrive - xyz\Documents\MobaXterm\slash\bin\MobaSCPRinew.exe"
I use the "professional edition" with the same license ID, so I suppose technically it is the same software.
Issue only popped up till now after a reboot of my system, launching the MobaXterm and subsequently starting an ssh session.
Restarting MobaXterm only (once) didn't produce the issue.
I now upgraded to 22.1. Since the release notes do not mention anything concerning this issue, I can't know for sure the problem will be solved. I'll report back when it reoccurs.
Johan
Bear with me please, since I don't know that much about Windows – I'm trying to set up UWF (Unified Writing Filter) here on my mac through a Parallels installation of Windows 10. I found out how to enable UWF through the Control Pane, which I did. I then restarted the Virtual Machine. When I then tried to configure it through the powershell or command prompt (both run in admin mode), I got no response whatsoever. The uwfmgr.exe is there under c:\windows\system32, but like I said, it doesn't do anything when I run it. No response – but also, no error.
Can anyone help me with this?
I had the same issue and solved it by downloading the latest ISO for 10 Enterprise.
It seems you need a Windows 10 Enterprise edition for this to work. Just re-activating windows with an Enterprise key makes uwfmgr.exe print stuff again. Just testing, whether it works as well.
This was tested on Windows 10, V1809.
Has anyone had any luck in getting an Oracle client to install and work with Windows 7 RC? I went and upgraded from Vista to Windows 7 but having terrible problems getting my Oracle databases to work...
Phew I eventually worked it out. I downloaded the Oracle Instant Client x86 and copied that and setup up my environment variables (PATH, LD_LIBRARY, TNS_ADMIN). The problem I had before was that I downloaded the x64 version which won't work with Toad which is an x86 app! As soon as I installed the x86 version the problem was solved....
I ran into similar issues.
After downloading the Oracle 10g client for Vista (10203_vista_w2k8_x86_production_client.zip) from the Oracle web site, I unzipped the files, right-clicked on setup.exe, and selected Run As Administrator.
Within the Oracle Universal Installer, I selected Administrator, clicked the Next button, and then selected the Oracle home name and path and clicked the Next button.
As mentioned in other answers, the installer failed on the next screen, "Product-Specific Prequisite Checks". The specific failure was "Checking operating system requirements..." in the third column, there is a check box (which was not checked). I clicked in the check box and the installer changed the status to "Not executed". When I clicked the Next button, it warned me that the install may fail. I clicked Okay. I was able to install without further issue.
It is not intuitive and the Oracle 11g client may be different, but this worked for me.
-Weston
I had the same issue. What I did to solve this problem was:
- right click on the setup
- choose Troubleshoot Compatibility
- it will popup a window "Test Compatibility settings for the program". It tells me which version is it compatible with and Windows 7 will activate that setting for you. In my case was Windows XP service pack 2 is the setting used to install this Oracle 10g client
- click on the button "Start the program" it will run the installer
- done
It Worked with me, I had to do the following: (all after installing oracle in either compatibility mode or skipping the OS check results)
1- Set up the %Oracle_Home% in the environment variables.
2- Configured "tnsnames.ora, listener.ora and sqlnet.ora" to make sure they match
3- Replaced a malfunctioning DLL for sql*plus (I found the original one in the setup's temp file, just by using search from windows)
4- Logged into sqlplus from command line (sys /as dba) and created a user with high privileges (cuz you can't build a repository with "system" or "sys"
5- Used this new user to create the repository from the RAU (Repository Administration Utility), and here you go!
Read here: http://forums.oracle.com/forums/thread.jspa?messageID=3454893�
In Visual Basic 6, when I attempt to access Project > References, it throws an error:
Error accessing system registry
I am:
Logged in as the local computer administrator
running Windows XP Professional and
I can execute regedt32.exe and access all the registry keys just fine.
VB6 was installed as the local administrator.
Any idea why this happens?
I'm running crystal reports 8.5 and it supposed to already have fixed that issue but apparently I still have the issue with 8.5 installed. I have also made the attempt of reinstalling crystal reports with no luck on the issue.
Depending on the Windows OS you have (I have Windows 7 Enterprise), you might want to try giving administrator rights to the REGTLIB.EXE (located in C:\Windws). Right click on the REGTLIB.EXE file. Select Properties from the pop-up menu. Then select the Compatiblity tab. On the Compatiblity tab, check/select the Run this program as Administrator checkbox. Click OK to save your changes. It might take take care of the problem for you. It worked for me. Good luck.
For me this worked:
goto C:\Program Files\Microsoft Visual Studio\VB98
change the property of VB6.EXE by right click->Compatibility In privilege level section, check the option Run this program as Administrator
If you're running Office 2010 (Beta) Word (apparently) writes a restricted registry key. VB throws the error when scanning the registry. The key I have is:
HKCR\TypeLib\{00020905-0000-0000-C000-000000000046}\8.5
For Regmon - Filter for Process Name -> "vb6.exe" and Result -> ACCESS DENIED. Helps find it very quickly.
Fixed it with PSToosl (PSEXEC) to run registry editor. The command line is,
psexec -i -d -s c:\windows\regedit.exe
psexec needs to be run with elevated-permissions.
Edit by Jim: I'm on a Windows 7 (x64) box. Elevated permissions require the PSTools solution. XP can get away with a little less.
You could try Process Monitor to see which registry keys are accessed.
I got this on a machine that I was using for VB6 development. I had been building a lot of COM DLLs from VB6 (without binary compatibility) and the cruft that had built up in the registry eventually got too much.
Have a look at what size the registry is and what limit you have set. I doubled the registry size and then went looking for a good registry hoover.
Here is a solution from Microsoft. It references the Crystal Reports problem, but the solution just uses regedit32 to walk the HKEY_CLASSES_ROOT\TypeLib and HKEY_CLASSES_ROOT\CLSID registry branches for dimmed keys and correcting the security on those keys. There are also instructions to fix the security if regedit32 is unable to access the key. Article ID: 269383
In Windows 7 go to start menu then right click "Microsoft Visual Basic 6" then select properties and click Compatibility from the dialog box that appears then tick "Run this program as an administrator".
Have you tried this? Basically, it seems that it is a crystal reports issue. Hope that helps.
Perhaps worth a try going to the "User Account Control Settings".
Regards,
When I installed VB6 on Win7-64 (using instructions easily found by a search engine), it worked fine. UAC was off -- i.e. set to "never notify."
After a few weeks I turned UAC on -- i.e. set it to its default. VB6 then couldn't compile because of the "Error accessing the system registry" problem. Unfortunately, turning it off again didn't help. Apparently the damage done by turning it on was irreversible. I can't explain why this should be, but that's my experience.
Giving REGTLIB.EXE administrative privileges while leaving UAC off sounded like a great idea, but that didn't work for me either.
Finally, using Process Monitor and PsTools as described in other posts here worked. However, I had to give Full Control to large parts of my registry to Everyone. This didn't apply just to isolated keys. It seems that the compiler needs to add keys to major nodes, so I had to open up these entire nodes.
Aside from the fact that working through these steps took hours, I'm now much more exposed than I was before I tried to increase security via UAC, However, I need VB6 and don't see another solution short of a new computer.
Lesson: Don't use UAC with VB6. Except if you've arrived here it's too late for that.
It's VB6 installation issue. Try to re-intall VB6 on your system. Otherwise open "visual studio 6.0" with "Run as Administrator". Then open/browse your project .vbp file via - New Project -> Existing tab.
I have fixed the problem. But none of the suggestion above worked. What I did is giving everyone full control over the SYSTEM key in the registry. This creats a security break. I am running 64bit Windows 7 with vb6 serice pack 6B.
I'm running Windows 10 Pro (10.0.16299 Build 16299) 64 bit. I was having this error when trying to compile a VB6 DLL.
I saw several answers in this post about running in compatibility mode as administrator. I thought I would first try just running in compatibility mode for Windows XP (sp2). I was able to compile my DLL after checking that box. I didn't need to run as administrator.